ID |
Date |
Author |
Project |
Subject |
Run Number |
Events |
XYPosition |
Cooling |
Data |
103
|
Sat Jun 13 16:47:28 2015 |
Benedikt Würkner | SVD3 (H6B) | Mimosa threshold with FEI4 | 82 | 12000 | | No | Good |
Set mimosa threshold to 5 and recorded with FEI4 upstream
L3 already in sensor but not yet configured.
Probably to noisy to help much |
104
|
Sat Jun 13 17:05:35 2015 |
Benedikt Würkner | SVD3 (H6B) | L3 with FEI4 | 84 | 30000 | 1 | No | Good |
L3 sensor at position x: 105, y: 47 hitting apvs: 2&3 on p-side and apv 3 on n-side |
Attachment 1: Telescope_with_L3.png
|
|
105
|
Sat Jun 13 18:02:04 2015 |
Benedikt Würkner | SVD3 (H6B) | L3 with FEI4 | 85 | 70000 | 2 | No | Good |
L3 sensor at position x: 115, y: 47 hitting apvs: 2&3 on p-side and apv 3&4 on n-side |
106
|
Sat Jun 13 19:14:41 2015 |
Benedikt Würkner | SVD3 (H6B) | L3 with FEI4 | 86 | 732000 | 3 | No | Good |
L3 sensor at position x: 115, y: 57 hitting apvs: 1&2 on p-side and apv 3&4 on n-side |
4
|
Thu Jun 4 14:15:50 2015 |
Hao Yin | Belle II FADC (H6A) | FIR | 001 | | | | Good |
FIR filer and ADC delay with all sensor and telescope.
telescope n-side switched. |
5
|
Thu Jun 4 14:16:20 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 001 | 10000 | | | Good |
FirRun001, room temp
telescope n-side switched. |
6
|
Thu Jun 4 15:12:41 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 001 | 50000 | 1 | No | Good |
PedestalRun001, FIRRun001, room temp
telescope n-side switched.
In order to correct the position change the |
Attachment 1: BW_p-side_001Result.pdf
|
Attachment 2: BW_n-side_001Result.pdf
|
Attachment 3: L6_p-side_001ModProp.pdf
|
Attachment 4: L6_n-side_001ModProp.pdf
|
Attachment 5: L6_p-side_001Result.pdf
|
Attachment 6: L5_p-side_001ModProp.pdf
|
Attachment 7: L6_n-side_001Result.pdf
|
Attachment 8: L5_n-side_001ModProp.pdf
|
Attachment 9: L5_p-side_001Result.pdf
|
Attachment 10: L3_p-side_001ModProp.pdf
|
Attachment 11: L5_n-side_001Result.pdf
|
Attachment 12: L3_p-side_001Result.pdf
|
Attachment 13: L3_n-side_001ModProp.pdf
|
Attachment 14: L3_n-side_001Result.pdf
|
Attachment 15: L4_p-side_001ModProp.pdf
|
Attachment 16: L4_n-side_001ModProp.pdf
|
Attachment 17: L4_p-side_001Result.pdf
|
Attachment 18: L4_n-side_001Result.pdf
|
Attachment 19: BW_p-side_001ModProp.pdf
|
Attachment 20: BW_n-side_001ModProp.pdf
|
7
|
Thu Jun 4 18:44:50 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 002 | 50000 | 2 | No | Good |
room temp, FIRRun001, pedestal run 003 |
Attachment 1: -Z_p-side_002ModProp.pdf
|
Attachment 2: -Z_n-side_002ModProp.pdf
|
Attachment 3: -Z_p-side_002Result.pdf
|
Attachment 4: L6_p-side_002ModProp.pdf
|
Attachment 5: -Z_n-side_002Result.pdf
|
Attachment 6: L6_n-side_002ModProp.pdf
|
Attachment 7: L6_p-side_002Result.pdf
|
Attachment 8: L5_p-side_002ModProp.pdf
|
Attachment 9: L6_n-side_002Result.pdf
|
Attachment 10: L5_n-side_002ModProp.pdf
|
Attachment 11: L5_p-side_002Result.pdf
|
Attachment 12: L3_p-side_002ModProp.pdf
|
Attachment 13: L5_n-side_002Result.pdf
|
Attachment 14: L3_n-side_002ModProp.pdf
|
Attachment 15: L3_p-side_002Result.pdf
|
Attachment 16: L3_n-side_002Result.pdf
|
Attachment 17: L4_p-side_002ModProp.pdf
|
Attachment 18: L4_n-side_002ModProp.pdf
|
Attachment 19: L4_p-side_002Result.pdf
|
8
|
Thu Jun 4 18:45:42 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 003 | 10000 | | | Good |
firrun003, room temp
|
10
|
Thu Jun 4 22:07:16 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 003 | 189k | 3 | No | Good |
CE. pedestal run 003. Fir run 002. Room temp |
Attachment 1: CE_p-side_003ModProp.pdf
|
Attachment 2: L4_n-side_002Result.pdf
|
Attachment 3: CE_n-side_003ModProp.pdf
|
Attachment 4: CE_p-side_003Result.pdf
|
Attachment 5: CE_n-side_003Result.pdf
|
Attachment 6: L6_p-side_003ModProp.pdf
|
Attachment 7: L6_n-side_003ModProp.pdf
|
Attachment 8: L6_p-side_003Result.pdf
|
Attachment 9: L6_n-side_003Result.pdf
|
Attachment 10: L5_p-side_003ModProp.pdf
|
Attachment 11: L5_n-side_003ModProp.pdf
|
Attachment 12: L5_p-side_003Result.pdf
|
Attachment 13: L3_p-side_003ModProp.pdf
|
Attachment 14: L5_n-side_003Result.pdf
|
Attachment 15: L3_n-side_003ModProp.pdf
|
Attachment 16: L3_p-side_003Result.pdf
|
Attachment 17: L3_n-side_003Result.pdf
|
Attachment 18: L4_p-side_003ModProp.pdf
|
Attachment 19: L4_n-side_003ModProp.pdf
|
Attachment 20: L4_p-side_003Result.pdf
|
Attachment 21: L4_n-side_003Result.pdf
|
11
|
Fri Jun 5 08:20:27 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 004 | 50000 | 4 | No | Good |
room temp, FIRRun002, pedestalrun003, taget FW |
Attachment 1: L6_p-side_004ModProp.pdf
|
Attachment 2: -Z_n-side_004ModProp.pdf
|
Attachment 3: L6_p-side_004Result.pdf
|
Attachment 4: L6_n-side_004ModProp.pdf
|
Attachment 5: L5_p-side_004ModProp.pdf
|
Attachment 6: L6_n-side_004Result.pdf
|
Attachment 7: L5_n-side_004ModProp.pdf
|
Attachment 8: L5_p-side_004Result.pdf
|
Attachment 9: L3_p-side_004ModProp.pdf
|
Attachment 10: L5_n-side_004Result.pdf
|
Attachment 11: L3_n-side_004ModProp.pdf
|
Attachment 12: L3_p-side_004Result.pdf
|
Attachment 13: L3_n-side_004Result.pdf
|
Attachment 14: L4_p-side_004ModProp.pdf
|
Attachment 15: L4_n-side_004ModProp.pdf
|
Attachment 16: L4_p-side_004Result.pdf
|
12
|
Fri Jun 5 12:02:29 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 001 | | | | Good |
room temp max subevent at 2. with lat = 96 |
13
|
Fri Jun 5 12:03:34 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 002 | | | | Good |
lat = 97 to a greater range of lat scan |
14
|
Fri Jun 5 19:55:00 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 003 | | | | Unknown |
lat = 98
room temp
pedestalrun 003 |
15
|
Fri Jun 5 19:59:44 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 004 | 10000 | | | Good |
update pedestal values for room temp sixlet runs.
|
16
|
Fri Jun 5 23:38:51 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 005 | 10000 | | | Unknown |
Readjust after cooling box.
room temp, firrun002
|
17
|
Fri Jun 5 23:39:49 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 005 | ~200k | 5 | No | Good |
FIRRun002, pedestalrun005, room temp
Target BW: beam spot at ~ (0 p, 0 n) |
Attachment 1: BW_edge_p-side_005ModProp.pdf
|
Attachment 2: L4_n-side_004Result.pdf
|
Attachment 3: BW_edge_n-side_005ModProp.pdf
|
Attachment 4: BW_edge_p-side_005Result.pdf
|
Attachment 5: BW_edge_n-side_005Result.pdf
|
Attachment 6: L6_p-side_005ModProp.pdf
|
Attachment 7: L6_n-side_005ModProp.pdf
|
Attachment 8: L6_p-side_005Result.pdf
|
Attachment 9: L5_p-side_005ModProp.pdf
|
Attachment 10: L6_n-side_005Result.pdf
|
Attachment 11: L5_n-side_005ModProp.pdf
|
Attachment 12: L5_p-side_005Result.pdf
|
Attachment 13: L3_p-side_005ModProp.pdf
|
Attachment 14: L5_n-side_005Result.pdf
|
Attachment 15: L3_n-side_005ModProp.pdf
|
Attachment 16: L3_p-side_005Result.pdf
|
Attachment 17: L3_n-side_005Result.pdf
|
Attachment 18: L4_p-side_005ModProp.pdf
|
Attachment 19: L4_n-side_005ModProp.pdf
|
Attachment 20: L4_p-side_005Result.pdf
|
Attachment 21: L4_n-side_005Result.pdf
|
18
|
Sat Jun 6 12:43:55 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 006 | 50000 | 6 | No | Good |
FIRRun002, room temp, pedestalrun005,
layout: same as HW 005
target: -z, pos 6 (strip: p-0, n-0);
NOTE: results shown in the attachments has been evaluated with cmc containing 128 strip
|
Attachment 1: -Z_edge_p-side_006ModProp.pdf
|
Attachment 2: -Z_edge_n-side_006ModProp.pdf
|
Attachment 3: -Z_edge_p-side_006Result.pdf
|
Attachment 4: L6_p-side_006ModProp.pdf
|
Attachment 5: -Z_edge_n-side_006Result.pdf
|
Attachment 6: L6_n-side_006ModProp.pdf
|
Attachment 7: L6_p-side_006Result.pdf
|
Attachment 8: L5_p-side_006ModProp.pdf
|
Attachment 9: L6_n-side_006Result.pdf
|
Attachment 10: L5_n-side_006ModProp.pdf
|
Attachment 11: L5_p-side_006Result.pdf
|
Attachment 12: L3_p-side_006ModProp.pdf
|
Attachment 13: L5_n-side_006Result.pdf
|
Attachment 14: L3_n-side_006ModProp.pdf
|
Attachment 15: L3_p-side_006Result.pdf
|
Attachment 16: L3_n-side_006Result.pdf
|
Attachment 17: L4_p-side_006ModProp.pdf
|
Attachment 18: L4_n-side_006ModProp.pdf
|
Attachment 19: L4_p-side_006Result.pdf
|
Attachment 20: L4_n-side_006Result.pdf
|
19
|
Sat Jun 6 14:28:28 2015 |
Hao Yin | Belle II FADC (H6A) | Harware | 007 | 50000 | 7 | No | Good |
room temp, FIRRun002, PedestalRun005, room temp
target: CE, pos 7 (p-0, n-0) |
Attachment 1: CE_edge_p-side_007ModProp.pdf
|
Attachment 2: CE_edge_n-side_007ModProp.pdf
|
Attachment 3: CE_edge_p-side_007Result.pdf
|
Attachment 4: CE_edge_n-side_007Result.pdf
|
Attachment 5: L6_p-side_007ModProp.pdf
|
Attachment 6: L6_n-side_007ModProp.pdf
|
Attachment 7: L6_p-side_007Result.pdf
|
Attachment 8: L5_p-side_007ModProp.pdf
|
Attachment 9: L6_n-side_007Result.pdf
|
Attachment 10: L5_n-side_007ModProp.pdf
|
Attachment 11: L5_p-side_007Result.pdf
|
Attachment 12: L3_p-side_007ModProp.pdf
|
Attachment 13: L5_n-side_007Result.pdf
|
Attachment 14: L3_n-side_007ModProp.pdf
|
Attachment 15: L3_p-side_007Result.pdf
|
Attachment 16: L3_n-side_007Result.pdf
|
Attachment 17: L4_p-side_007ModProp.pdf
|
Attachment 18: L4_n-side_007ModProp.pdf
|
Attachment 19: L4_p-side_007Result.pdf
|
Attachment 20: L4_n-side_007Result.pdf
|
23
|
Sat Jun 6 16:48:41 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 008 | 50000 | 8 | No | Good |
room temp, FIRRun002, PedestalRun005, room temp
target: FW, pos 8 (p-0, n-0) |
Attachment 1: FW_edge_1_p-side_008ModProp.pdf
|
Attachment 2: FW_edge_1_n-side_008ModProp.pdf
|
Attachment 3: FW_edge_1_p-side_008Result.pdf
|
Attachment 4: FW_edge_1_n-side_008Result.pdf
|
Attachment 5: L6_p-side_008ModProp.pdf
|
Attachment 6: L6_n-side_008ModProp.pdf
|
Attachment 7: L6_p-side_008Result.pdf
|
Attachment 8: L5_p-side_008ModProp.pdf
|
Attachment 9: L6_n-side_008Result.pdf
|
Attachment 10: L5_n-side_008ModProp.pdf
|
Attachment 11: L5_p-side_008Result.pdf
|
Attachment 12: L3_p-side_008ModProp.pdf
|
Attachment 13: L5_n-side_008Result.pdf
|
Attachment 14: L3_n-side_008ModProp.pdf
|
Attachment 15: L3_p-side_008Result.pdf
|
Attachment 16: L3_n-side_008Result.pdf
|
Attachment 17: L4_p-side_008ModProp.pdf
|
Attachment 18: L4_n-side_008ModProp.pdf
|
Attachment 19: L4_p-side_008Result.pdf
|
Attachment 20: L4_n-side_008Result.pdf
|