| ID | Date | Author  | Project | Subject | Run Number | Events | StartTime | EndTime | Text |  | 
| 17 | Wed Aug 19 15:41:17 2009 | Wolfgang Kiesenhofer | SiLC | angle scan templates |  |  |  |  | Linie am rechten Seitenrand (in der Vorschau unten leider nicht gut zu sehen) sollte mit
 dem rechten Rand der Basisplatte abschließen
 | 13x   | 
| 55 | Fri Aug 21 17:14:58 2009 | Wolfgang Kiesenhofer |  | S/N Histograms Raw (no data selection) | run001 (strips), run002 (pitch adapter), run003 (upper edge) |  |  |  |  |     | 
| 67 | Sat Aug 22 13:28:53 2009 | Wolfgang Kiesenhofer | Pt_ITE512 | runlist for pt-module angle-scan |  |  |  |  | Preliminary run list for pt-modules + ite512 + silc1, silc2,
 silc5, silc6
 |  | 
| 106 | Wed Aug 26 14:26:13 2009 | Wolfgang Kiesenhofer | ITE128 | S/N final Single-Metal | run001 & run002 |  |  |  | Most probable S/N, Single Metal Layer, 2D histogram fitted with langau in 5 bin
 (strips) slices.
 |   | 
| 107 | Wed Sep  2 14:15:17 2009 | Wolfgang Kiesenhofer | ITE128 | ITE 128 Cross-Talk | run002 |  |  |  | Preliminary strip correlation (Kendalls Tau) for threshold = 3*stripnoise.
 |   | 
| 114 | Fri Dec  4 12:21:56 2009 | Wolfgang Kiesenhofer |  | ITE128 strip correlation kendall tau (preliminary result) |  |  |  |  | Kendall tau (rank correlation) for module 1 (single layer 1 / h13), module 2 (single
 layer 2 / h14),  module 6 (standard
 |     | 
| 11 | Fri Jul 31 19:23:26 2009 | Thomas Bergauer |  | Laser Spot size |  |  |  |  | 10cm nach Kollimator: Durchmesser 1.45mm (FWHM) 20cm
 nach Kollimator: Durchmesser 1,54mm (FWHM)
 |      | 
| 14 | Fri Aug 14 19:35:43 2009 | Thomas Bergauer | Pt_ITE512 | intcal |  |  |  |  | HV=100V except h05-ITE-512 and h06-ITE-512 (runaway, HV off)
 h01-Pt: 10uA
 |  | 
| 58 | Fri Aug 21 22:42:32 2009 | Thomas Bergauer | common | EUDAQ config file used when running with telescope |  |  |  |  | 
 |   | 
| 60 | Sat Aug 22 03:27:13 2009 | Thomas Bergauer | BELLE | APVDAQ + telescope 31,8 MHz transparent mode (cooling?) | run014 | 75k | 22.08.2009  03:25:23 | 22.08.2009  07:08:09 | HV=80V, 31.8 MHz, beam on, 120 GeV 6 samples
 chiller set
 to 13 deg.
 
 
 
 |  | 
| 61 | Sat Aug 22 08:32:02 2009 | Thomas Bergauer | BELLE | APVDAQ + telescope 31,8 MHz hit mode (cooling?) | run015 | 75k | 22.08.2009  08:15:05 | 22.08.2009  09:25:21 | HV=80V, 31.8 MHz, beam on, 120 GeV 6 samples, hit mode, hitcut=4
 chiller
 set to 13 deg.
 
 
 
 |  | 
| 62 | Sat Aug 22 09:44:50 2009 | Thomas Bergauer | BELLE | APVDAQ + telescope 31,8 MHz hit mode (cooling?) | run016 | 75k | 22.08.2009  09:42:38 | 22.08.2009  10:24:05 | HV=80V, 31.8 MHz, beam on, 120 GeV 6 samples, hit mode, hitcut=5
 chiller
 set to 13 deg.
 
 
 
 |  | 
| 63 | Sat Aug 22 10:28:50 2009 | Thomas Bergauer | BELLE | APVDAQ + telescope 40 MHz hit mode (cooling?) | run017 | 75k | 22.08.2009  10:26:28 | 22.08.2009  11:16:12 | HV=80V, 40 MHz, beam on, 120 GeV 6 samples, hit mode, hitcut=4
 chiller
 set to 13 deg.
 
 
 
 |  | 
| 64 | Sat Aug 22 11:26:00 2009 | Thomas Bergauer | BELLE | APVDAQ + telescope 40 MHz hit mode (cooling?) | run018 | 75k | 22.08.2009  11:16:57 | 22.08.2009  11:58:56 | HV=80V, 40 MHz, beam on, 120 GeV 6 samples, hit mode, hitcut=5
 chiller
 set to 13 deg.
 
 
 
 |  | 
| 65 | Sat Aug 22 11:54:49 2009 | Thomas Bergauer | common | beam profile |  |  |  |  | beam shifted a bit in vertical direction downwards since 21. August 09 evening
 
 |   | 
| 71 | Sat Aug 22 15:12:44 2009 | Thomas Bergauer | common | beam profile |  |  |  |  | playing with TRIM4 in vertical plane (setting to 20A current) shifted beamspot
 back to center position
 |   | 
| 77 | Sun Aug 23 01:46:03 2009 | Thomas Bergauer | ITE128 | 2nd run with ITE128: central position | run021 | 100k | 23.08.09 00:10 (ca.) | 23.08.2009  02:15:10 | ITE128 HV = 70V, 40MHz, 120 GeV
 TLU trigger w telescope
 |   | 
| 78 | Sun Aug 23 02:18:20 2009 | Thomas Bergauer | ITE128 | 2nd run with ITE128: top position (3mm below center); during night | run022 | 407895 | 23.08.2009  02:16:21 | 23.08.2009  08:04:09 | ITE128 HV = 70V, 40MHz, 120 GeV
 TLU trigger w telescope
 |   | 
| 79 | Sun Aug 23 08:13:31 2009 | Thomas Bergauer | ITE128 | 2nd run with ITE128: top position (4mm below center) | run023 | 100k | 23.08.2009  08:06:58 | 23.08.2009  09:30:53 | ITE128 HV = 70V, 40MHz, 120 GeV
 TLU trigger w telescope
 |  | 
| 94 | Tue Aug 25 09:00:51 2009 | Thomas Bergauer |  | beam conditions |  |  |  |  | manually changed TRIM3, TRIM4 and TRIM6 |    | 
| 97 | Tue Aug 25 11:26:23 2009 | Thomas Bergauer | Pt_ITE512 | Pt_ITE512 6deg NO air! | run036 | 20k | 25.08.2009 11:25 | 25.08.2009  12:19:55 | Pt: 6 Grad, HV=200V, 20% (start run) to % (end run) RH, beam on, 120GeV
 ITE512: HV=70V,
 X-Y-Table:
 |  | 
| 1 | Mon Jul  6 12:22:47 2009 | Stephan Hänsel | SiLC | Measurements - hybrids with APV |  |  |  |  | Pt Modules: Hybrids with 4 APVs:
 
 
 |  | 
| 2 | Mon Jul  6 12:24:53 2009 | Stephan Hänsel | SiLC | Module Drawings |  |  |  |  | Pt Modules: 
 
 3D-View
 technical drawings:
 
 |  | 
| 5 | Mon Jul  6 12:29:20 2009 | Stephan Hänsel | SiLC | Sensors - layout |  |  |  |  | Pt Modules: CMS OB1 Sensors:
 
 
 |   | 
| 7 | Mon Jul  6 16:22:36 2009 | Stephan Hänsel | SiLC | Measurements - Sensors |  |  |  |  | Pt Modules: OB1-Sensors:
 30210331516116
 |  | 
| 8 | Mon Jul  6 16:23:51 2009 | Stephan Hänsel | SiLC | Module Components |  |  |  |  | Pt Modules: 
 Pt-1:
 |  | 
| 9 | Thu Jul  9 10:29:58 2009 | Stephan Hänsel | SiLC | Measurements - Modules |  |  |  |  | Pt Modules: 
 - Sensoren sind Luftfeuhtigkeitsempfindlich
 |  | 
| 10 | Fri Jul 17 14:03:21 2009 | Stephan Hänsel |  | What to measure |  |  |  |  | Origami 
 Testbeam08 Module
 |  | 
| 13 | Fri Aug 14 16:45:25 2009 | Stephan Hänsel |  | Module - Setups |  |  |  |  | 
 5mm Inbus-Schlüssel
 
 3mm Inbus Schlüssel
 
 |  | 
| 15 | Fri Aug 14 21:36:17 2009 | Markus Friedl |  | Config files |  |  |  |  | Status of config files as of Friday 14 August 2009 late evening
 
 |  | 
| 6 | Mon Jul  6 14:30:45 2009 | Marko Dragicevic |  | Equipment List |  |  |  |  | [B]Slow Control:[/B] Source Measurement Unit Keithley K2410, Inv.Nr.:
 540-702, 2000EUR
 |   | 
| 12 | Tue Aug 11 14:03:57 2009 | Marko Dragicevic |  | Sensor Designs |  |  |  |  | Screenshots HEPHY
 Gallery
 GDS File Viewer
 
 | 6x   | 
| 20 | Wed Aug 19 22:57:13 2009 | Marko Dragicevic |  | How-To |  |  |  |  | TLU (run from DAQPCHEPHY): ssh
 eudet@eudetmac001.cern.ch
 ssh tlupc
 |  | 
| 80 | Sun Aug 23 13:15:42 2009 | Marko Dragicevic | Pt_ITE512 | Current and Humindity during first Run |  |  |  |  | Current of Pt modules during first run Data
 of the run was dicarded.
 Compressed air flow was at ~2 bars
 |    | 
| 95 | Tue Aug 25 09:01:12 2009 | Marko Dragicevic | Pt_ITE512 | Pt_ITE512 2deg air | run034 | 20k | 25.08.09 08:56:18 | 25.08.09 09:45: | Pt: 2 Grad, HV=200V, 0% RH, beam on, 120GeV ITE512: HV=70V,
 X-Y-Table:
 x=99.6, y=36
 |  | 
| 96 | Tue Aug 25 09:53:16 2009 | Marko Dragicevic | Pt_ITE512 | Pt_ITE512 4deg  NO air! | run035 | 20k | 25.08.2009  09:50 | 25.08.2009  11:00 | Pt: 4 Grad, HV=200V, 0% (start run) to 14% (end run) RH, beam on, 120GeV
 ITE512: HV=70V,
 X-Y-Table:
 |  | 
| 98 | Tue Aug 25 12:30:04 2009 | Marko Dragicevic | Pt_ITE512 | Pt_ITE512 8deg  NO air! | run037 | 20k | 25.08.2009  12:45 | 25.08.2009  13:40:13 | Pt: 8 Grad, HV=200V, 28% (start run) to 31% (end run) RH, beam on, 120GeV
 ITE512: HV=70V, I=49.1muA
 X-Y-Table:
 |  | 
| 99 | Tue Aug 25 13:48:30 2009 | Marko Dragicevic | Pt_ITE512 | Pt_ITE512 10deg  NO air! | run038 | 20k | 25.08.2009  13:54:54 | 25.08.2009  15:22:38 | Pt: 10 Grad, HV=200V, 31.7% (start run) to 33.8% (end run) RH, beam on, 120GeV
 ITE512: HV=70V, I=50muA
 X-Y-Table:
 |  | 
| 100 | Tue Aug 25 15:33:07 2009 | Marko Dragicevic | Pt_ITE512 | Pt_ITE512 12deg NO air! | run039 | 20k | 25.08.2009 15:35 | 25.08.2009 17:10 | Pt: 12 Grad, HV=200V, 34.4% (start run) to 36.1% (end run) RH, beam on, 120GeV
 ITE512: HV=70V, I=50muA
 X-Y-Table:
 |  | 
| 101 | Tue Aug 25 17:14:52 2009 | Marko Dragicevic | Pt_ITE512 | Pt_ITE512 17deg NO air! | run040 | 20k | 25.08.2009  17:17:11 | 25.08.2009  18:08:57 | Pt: 17 Grad, HV=200V, 36.5% (start run) to xx.1% (end run) RH, beam on, 120GeV
 ITE512: HV=70V, I=51muA
 X-Y-Table:
 |   | 
| 32 | Thu Aug 20 15:50:58 2009 | Manfred Valentan | alignment_laser | slow control: HV graph | all alignemnt_laser runs |  | 20.08.09 10:36 | 4h 43m 52s later | blue graph: h03 white graph: h04
 |   | 
| 33 | Thu Aug 20 15:54:45 2009 | Manfred Valentan | BELLE | temp/humidty logger data |  |  |  |  | position: underneath telescope. dewpoint ~ 15 degree
 test with chiller: running 4 hours
 |   | 
| 35 | Thu Aug 20 19:12:23 2009 | Manfred Valentan | alignment_laser | background mesurement with laser OFF | laser002 | 10000 | 20.08.2009  19:10:09 | 20.08.2009  19:11:57 |  |  | 
| 36 | Thu Aug 20 19:15:29 2009 | Manfred Valentan | alignment_laser | laser on | laser003 | 10000 | 20.08.2009  19:13:04 | 20.08.2009  19:14:49 | HV=70V, 40MHz, 6 samples, beam off 5ns trigger pulse width, 1 kHz trigger,
 
 |  | 
| 37 | Thu Aug 20 19:35:06 2009 | Manfred Valentan | alignment_laser | laser at high intensity (saturation on near sensor, good signal on far sensor) | laser004 | 100000 | 20.08.2009  19:18:47 | 20.08.2009  19:35:05 | HV=70V, 40MHz, 6 samples, beam off 5ns trigger pulse width, 1 kHz trigger,
 
 |   | 
| 38 | Thu Aug 20 19:46:02 2009 | Manfred Valentan | alignment_laser | laser at high intensity, far sensor in 2nd position | laser005 | 50000 | 20.08.2009  19:45:16 | 20.08.2009  19:53:01 | far sensor in 2nd position; laser at high intensity (saturation on near sensor, good
 signal on far sensor)
 |  | 
| 39 | Thu Aug 20 19:56:21 2009 | Manfred Valentan | alignment_laser | background mesurement with laser OFF | laser006 | 10k | 20.08.2009  19:54:04 | 20.08.2009  19:55:38 |  |  | 
| 40 | Thu Aug 20 20:06:06 2009 | Manfred Valentan | alignment_laser | low intensity (like laser001), but far sensor in 2nd position | laser007 | 50k | 20.08.2009  19:57:52 | 20.08.2009  20:05:34 | HV=70V, 40MHz, 6 samples, beam off, far sensor in 2nd position
 5ns trigger pulse width, 1 kHz trigger,
 |  | 
| 81 | Sun Aug 23 14:03:14 2009 | Manfred Valentan | Pt_ITE512 | Pt & ITE512 center position, 1 deg | run024 | 20000 | 23.08.2009 13:59:06 |  | Pt: 1 Grad, HV=200V, 0% RH ITE512: HV=70V
 X-Y-Table: x=99.6, y=36
 |  | 
| 102 | Tue Aug 25 18:22:25 2009 | Manfred Valentan | Pt_ITE512 | Pt_ITE512 40deg NO air! (for calibration) | run041 | 10k | 25.08.2009 18:20:30 | 25.08.2009 | Pt: 40 Grad, HV=200V, 36.9% (start run) to xx% (end run) RH, beam on, 120GeV
 ITE512: HV=70V, I=51muA
 X-Y-Table:
 |  | 
| 84 | Sun Aug 23 23:38:27 2009 | Georg Auzinger |  | Phone numbers |  |  |  |  | Georg #70 Wolfgang - Building: 41, Room: 204,
 Tel: ?
 |  | 
| 85 | Mon Aug 24 11:58:23 2009 | Georg Auzinger | Pt_ITE512 | Pt_ITE512 1deg air | run025 | 20k | 24.08.09 11:24:33 | 24.08.09 12:40:25 | Pt: 1 Grad, HV=200V, 0% RH, beam on, 120GeV ITE512: HV=70V,
 X-Y-Table:
 x=99.6, y=36
 |  | 
| 86 | Mon Aug 24 13:01:14 2009 | Georg Auzinger | Pt_ITE512 | Pt_ITE512 3deg air | run026 | 20k | 24.08.09 11:24:33 | 24.08.2009  14:11:45 | Pt: 3 Grad, HV=200V, 0% RH, beam on, 120GeV ITE512: HV=70V,
 X-Y-Table:
 x=99.6, y=36
 |  | 
| 87 | Mon Aug 24 14:23:01 2009 | Georg Auzinger | Pt_ITE512 | Pt_ITE512 5deg air | run027 | 20k | 24.08.2009  14:27:07 | 24.08.2009  15:26:20 | Pt: 5 Grad, HV=200V, 0% RH, beam on, 120GeV ITE512: HV=70V,
 X-Y-Table:
 x=99.6, y=36
 |  | 
| 88 | Mon Aug 24 15:28:49 2009 | Georg Auzinger | Pt_ITE512 | Pt_ITE512 7deg air | run028 | 20k | 24.08.09 15:39:50 | 24.08.09 16:40:54 | Pt: 7 Grad, HV=200V, 0% RH, beam on, 120GeV ITE512: HV=70V,
 X-Y-Table:
 x=99.6, y=36
 |  | 
| 89 | Mon Aug 24 16:44:36 2009 | Georg Auzinger | Pt_ITE512 | Pt_ITE512 9deg air | run029 | 20k | 24.08.09 17:03:21 | 24.08.09 18:20:55 | Pt: 9 Grad, HV=200V, 0% RH, beam on, 120GeV ITE512: HV=70V,
 X-Y-Table:
 x=99.6, y=36
 |  | 
| 90 | Mon Aug 24 18:30:07 2009 | Georg Auzinger | Pt_ITE512 | Pt_ITE512 11deg air | run030 | 20k | 24.08.09 18:45:09 | 24.08.09  20:37:04 | Pt: 11 Grad, HV=200V, 0% RH, beam on, 120GeV ITE512: HV=70V,
 X-Y-Table:
 x=99.6, y=36
 |  | 
| 91 | Mon Aug 24 22:04:56 2009 | Georg Auzinger | Pt_ITE512 | Pt_ITE512 13deg air | run031 | 20k | 24.08.09 20:53:50 | 24.08.09 22:00:49 | Pt: 13 Grad, HV=200V, 0% RH, beam on, 120GeV ITE512: HV=70V,
 X-Y-Table:
 x=99.6, y=36
 |  | 
| 92 | Mon Aug 24 22:12:22 2009 | Georg Auzinger | Pt_ITE512 | Pt_ITE512 15deg air | run032 | 19456 | 24.08.09 22:18:08 | 24.08.09 23:25:52 | Pt: 15 Grad, HV=200V, 0% RH, beam on, 120GeV ITE512: HV=70V,
 X-Y-Table:
 x=99.6, y=36
 
 no
 |  | 
| 93 | Tue Aug 25 01:33:18 2009 | Georg Auzinger | Pt_ITE512 | Pt_ITE512 0deg air | run033 | 151724 | 25.08.09 01:35:18 | 25.08.2009  08:44:27 | Pt: 0 Grad, HV=200V, 0% RH, beam on, 120GeV ITE512: HV=70V,
 X-Y-Table:
 x=99.6, y=36
 |  | 
| 16 | Wed Aug 19 15:37:37 2009 | Christian Irmler | ITE128 | internal calibration | cal001 |  | 15:31:29 |  | 8 modules, HV=70V, 40MHz, 1 sample no beam
 APV 4,5: inverter off, higher baseline
 |  | 
| 18 | Wed Aug 19 20:43:14 2009 | Christian Irmler | ITE128 | ITE128 shooting into strips w/o pitch adapter, low position | run001 | 100600 | 19.08.2009  20:42:08 | 19.08.2009  22:54:21 | DUT: SiLC 08_1, 6 x ITE128, SiLC 08_2 HV = 70V, 40MHz, 120 GeV
 TLU trigger, w/o telescope
 |  | 
| 19 | Wed Aug 19 22:56:07 2009 | Christian Irmler | ITE128 | ITE128 shooting into strips w pitch adapter, upper position | run002 | 100600 | 19.08.2009  22:54:23 | 20.08.2009  00:11:31 | DUT: SiLC 08_1, 6 x ITE128, SiLC 08_2 HV = 70V, 40MHz, 120 GeV
 TLU trigger, w/o telescope
 |  | 
| 21 | Thu Aug 20 00:16:45 2009 | Christian Irmler | ITE128 | pedestal correction | pedcorr001 |  | 20.08.2009  00:14:21 | 20.08.2009  00:24:28 | DUT: SiLC 08_1, 6 x ITE128, SiLC 08_2 HV = 70V, 40MHz
 pedestal correction
 |  | 
| 22 | Thu Aug 20 00:31:45 2009 | Christian Irmler | ITE128 | ITE128 shooting into strips w pitch adapter, upper position | run003 | 100600 | 20.08.2009  00:27:36 |  | DUT: SiLC 08_1, 6 x ITE128, SiLC 08_2 HV = 70V, 40MHz, 120 GeV
 TLU trigger, w/o telescope
 |  | 
| 23 | Thu Aug 20 10:48:39 2009 | Christian Irmler | alignment_beam | internal calibration | cal002 |  | 20.08.2009  10:49:07 | 20.08.2009  10:59:43 | 2 alignement modules location in beam direction: h04-h03
 HV=70V, 40MHz, 1 sample
 |  | 
| 24 | Thu Aug 20 11:05:26 2009 | Christian Irmler | alignment_beam | pedeatal correction | pedcorr002 |  | 20.08.2009  11:05:41 | 20.08.2009  11:09:35 | 2 alignement modules location in beam direction: h04-h03
 HV=70V, 40MHz, 1 sample
 |  | 
| 25 | Thu Aug 20 11:23:04 2009 | Christian Irmler | alignment_beam | beam in center of sensor w telescope | run004 (6860 telescope) | 10600 | 20.08.2009  11:09:50 | 20.08.2009  11:25:16 | 2 alignement modules location in beam direction: h04-h03
 beam in center of sensor
 |  | 
| 26 | Thu Aug 20 11:38:11 2009 | Christian Irmler | alignment_beam | top center, point 7 | run6861 (+6862) | 10600 | 20.08.2009  11:36:35 | 20.08.2009  11:53:51 | 2 alignement modules location in beam direction: h04-h03
 beam in center of sensor
 |  | 
| 27 | Thu Aug 20 12:18:40 2009 | Christian Irmler | alignment_beam | top left on sensor, point 2 | run6863 (telescope 6864) | 10600 | 20.08.2009  12:07:28 | 20.08.2009  12:25:57 | 2 alignement modules location in beam direction: h04-h03
 beam in center of sensor
 |  | 
| 28 | Thu Aug 20 12:35:13 2009 | Christian Irmler | alignment_beam | top right on sensor, point 3 | run6865 | 10600 | 20.08.2009  12:31:35 | 20.08.2009  12:48:04 | 2 alignement modules location in beam direction: h04-h03
 beam in center of sensor
 |  | 
| 29 | Thu Aug 20 12:50:59 2009 | Christian Irmler | alignment_beam | bottom right on sensor, point 4 | run6866 | 8467 | 20.08.2009  12:51:04 | 20.08.2009  13:05:01 | 2 alignement modules location in beam direction: h04-h03
 beam in center of sensor
 |  | 
| 30 | Thu Aug 20 14:31:29 2009 | Christian Irmler | alignment_beam | bottom left on sensor, point 5 | run6868 | 10600 | 20.08.2009  14:36:00 | 20.08.2009  14:51:57 | 2 alignment modules location in beam direction: h04-h03
 beam in center of sensor
 |  | 
| 31 | Thu Aug 20 15:15:33 2009 | Christian Irmler | alignment_beam | bottom center on sensor, point 6 | run6869 | 615 (beam manipulation by students) | 20.08.2009  14:56:16 | 20.08.2009  15:14:11 | 2 alignment modules location in beam direction: h04-h03
 beam in center of sensor
 |  | 
| 34 | Thu Aug 20 18:56:25 2009 | Christian Irmler | alignment_laser | laser | laser001 | 100000 | 20.08.2009  18:48:53 |  | 2 alignment modules location in beam direction: h04-h03
 laser is shooting on h03 (opposite
 |  | 
| 41 | Fri Aug 21 06:16:15 2009 | Christian Irmler | BELLE | internal calibration 40 MHz transparent mode | cal003 |  | 20.08.2009  23:27:12 | 21.08.2009  00:05:16 | Belle DUT, intcal HV=80V, 40 MHz, no beam
 transparent mode
 |  | 
| 42 | Fri Aug 21 06:24:10 2009 | Christian Irmler | BELLE | APVDAQ + telescope (beam alignement) | run6872 | 5785 | 21.08.2009  00:12:26 | 21.08.2009  00:27:11 | 4 Belle DUTs HV=80V, 40 MHz, 6 sample, 120 GeV
 
 |  | 
| 43 | Fri Aug 21 06:31:29 2009 | Christian Irmler | BELLE | APVDAQ + telescope | run6873 | 80173 | 21.08.2009  00:47:38 | 21.08.2009  06:07:02 | 4 Belle DUTs HV=80V, 40 MHz, 6 sample, 120 GeV
 
 |  | 
| 44 | Fri Aug 21 06:34:39 2009 | Christian Irmler | BELLE | APVDAQ + telescope 40 MHz | run005 | 75000 | 21.08.2009  06:10:41 | 21.08.2009  10:37:33 | was originally  run004, renamed after run was stopped to avoid duplicate names
 4 Belle DUTs
 |  | 
| 45 | Fri Aug 21 12:05:31 2009 | Christian Irmler | BELLE | APVDAQ  standalone 40 MHz hit mode | run006 | interrupted | 21.08.2009  10:41:51 | 21.08.2009  10:54:37 | 4 Belle DUTs HV=80V, 40 MHz, 6 sample, 120 GeV
 
 |  | 
| 46 | Fri Aug 21 12:06:06 2009 | Christian Irmler | BELLE | APVDAQ  standalone 40 MHz | run007 | interrupted | 21.08.2009  11:06:45 | 21.08.2009  11:10:40 | 4 Belle DUTs HV=80V, 40 MHz, 6 sample, 120 GeV
 
 |  | 
| 47 | Fri Aug 21 12:06:29 2009 | Christian Irmler | BELLE | APVDAQ  standalone hit mode 40 MHz | run008 | 75000 | 21.08.2009  11:15:09 | 21.08.2009  11:29:53 | 4 Belle DUTs HV=80V, 40 MHz, 6 sample, 120 GeV
 
 |  | 
| 48 | Fri Aug 21 12:06:39 2009 | Christian Irmler | BELLE | APVDAQ  standalone hit mode 40 MHz | run009 | 75000 | 21.08.2009  11:48:22 | 21.08.2009  12:01:53 | 4 Belle DUTs HV=80V, 40 MHz, 6 sample, 120 GeV
 
 |  | 
| 49 | Fri Aug 21 12:08:44 2009 | Christian Irmler | BELLE | APVDAQ  standalone 40 MHz | pedcorr003 |  | 21.08.2009  12:08:33 | 21.08.2009  12:18:45 | 4 Belle DUTs HV=80V, 40 MHz
 pedestal correction
 |  | 
| 50 | Fri Aug 21 12:22:43 2009 | Christian Irmler | BELLE | APVDAQ  standalone 31.8 MHz hit mode | run010 | 75000 | 21.08.2009  12:53:02 | 21.08.2009  13:35:01 | 4 Belle DUTs HV=80V, 31.8 MHz, 6 sample, 120 GeV
 switched to external clock source
 |  | 
| 51 | Fri Aug 21 13:38:20 2009 | Christian Irmler | BELLE | APVDAQ  standalone 31.8 MHz hit mode | run011 | 75000 | 21.08.2009  13:35:25 |  | 4 Belle DUTs HV=80V, 31.8 MHz, 6 sample, 120 GeV
 external clock source
 |  | 
| 52 | Fri Aug 21 14:18:11 2009 | Christian Irmler | BELLE | internal calibration 31.8 MHz transparent mode | cal004 |  | 21.08.2009  14:21:40 | 21.08.2009  15:01:24 | Belle DUT, intcal HV=80V, 31.8 MHz, no beam
 transparent mode
 |  | 
| 53 | Fri Aug 21 15:27:08 2009 | Christian Irmler | BELLE | internal calibration 31.8 MHz hit mode | cal005 |  | 21.08.2009  15:34:43 | 21.08.2009  16:29:47 | Belle DUT, intcal HV=80V, 31.8 MHz, no beam
 hit mode
 |  | 
| 54 | Fri Aug 21 16:37:22 2009 | Christian Irmler | BELLE | internal calibration 40 MHz hit mode | cal006 |  | 21.08.2009  16:30:33 |  | Belle DUT, intcal HV=80V, 40 MHz, no beam
 hit mode
 |  | 
| 56 | Fri Aug 21 18:07:57 2009 | Christian Irmler | BELLE | APVDAQ  standalone 31.8 MHz | pedcorr004 |  | 21.08.2009  17:49:10 | 21.08.2009  18:24:31 | 4 Belle DUTs HV=80V, 31.8 MHz
 pedestal correction
 |  | 
| 57 | Fri Aug 21 18:35:13 2009 | Christian Irmler | BELLE | APVDAQ  + telescope 31.8 MHz transparent mode | run012 | 60000 | 21.08.2009  18:31:01 | 21.08.2009  23:25:03 | 4 Belle DUTs HV=80V, 31.8 MHz, 6 sample, 120 GeV
 external clock source
 |  | 
| 59 | Sat Aug 22 01:06:34 2009 | Christian Irmler | BELLE | APVDAQ + telescope 40 MHz transparent mode (cooling?) | run013 | 75000 | 21.08.2009  23:49:38 | 22.08.2009  03:21:48 | Belle DUT, tranparent mode HV=80V, 40 MHz, beam on, 120 GeV
 6 samples
 |  | 
| 66 | Sat Aug 22 12:12:34 2009 | Christian Irmler | BELLE | internal calibration 40 MHz  transparent mode (cooling?) | cal007 |  | 22.08.2009  12:10:32 | 22.08.2009  12:49:09 | Belle DUT, intcal HV=80V, 40 MHz, beam off
 1 sample, transparent mode
 |  | 
| 68 | Sat Aug 22 13:30:28 2009 | Christian Irmler | BELLE | internal calibration 31.8 MHz  transparent mode (cooling?) | cal008 |  | 22.08.2009  12:50:48 | 22.08.2009  13:29:25 | Belle DUT, intcal HV=80V, 31.8 MHz, beam off
 1 sample, transparent mode
 |  | 
| 69 | Sat Aug 22 13:34:14 2009 | Christian Irmler | BELLE | pedestal correction 31.8 MHz  transparent mode (cooling?) | pedcorr005 |  | 22.08.2009  13:31:27 | 22.08.2009  13:41:42 | Belle DUT, intcal HV=80V, 31.8 MHz, beam off
 1 sample, transparent mode
 |  | 
| 70 | Sat Aug 22 14:46:12 2009 | Christian Irmler | BELLE | internal calibration 31.8 MHz  transparent mode + cooling | cal009 |  | 22.08.2009  14:43:55 | 22.08.2009  15:22:37 | Belle DUT, intcal HV=80V, 31.8 MHz, beam off
 1 sample, transparent mode
 |  | 
| 72 | Sat Aug 22 15:28:00 2009 | Christian Irmler | BELLE | pedestal correction 31.8 MHz  transparent mode + cooling | pedcorr006 |  | 22.08.2009  15:25:35 | 22.08.2009  15:36:00 | Belle DUT, HV=80V, 31.8 MHz, beam off 1 sample, transparent mode
 pedestal correction
 |  | 
| 73 | Sat Aug 22 15:52:33 2009 | Christian Irmler | BELLE | APVDAQ + telescope 31.8 MHz transparent mode + cooling | run019 | 75k | 22.08.2009  15:50:40 | 22.08.2009  19:14:21 | Belle DUT, HV=80V, 31.8 MHz, 120 GeV 6 samples, transparent mode
 chiller set to 13 deg,  2900
 |  | 
| 74 | Sat Aug 22 19:19:20 2009 | Christian Irmler | BELLE | APVDAQ + telescope 40 MHz transparent mode + cooling | run020 | 75k | 22.08.2009  19:17:29 | 22.08.2009  22:09:53 | Belle DUT, HV=80V, 40 MHz, 120 GeV 6 samples, transparent mode
 chiller set to 13 deg,  2900
 |  | 
| 75 | Sat Aug 22 22:14:50 2009 | Christian Irmler | BELLE | internal calibration 40 MHz  transparent mode + cooling | cal010 |  | 22.08.2009  22:24:22 |  | Belle DUT, intcal HV=80V, 40 MHz, beam off
 1 sample, transparent mode
 |  | 
| 76 | Sat Aug 22 23:06:22 2009 | Christian Irmler | BELLE | pedestal correction 40 MHz  transparent mode + cooling | pedcorr007 |  | 22.08.2009  23:04:29 | 22.08.2009  23:13:51 | Belle DUT, HV=80V, 40 MHz, beam off 1 sample, transparent mode
 pedestal correction
 |  | 
| 82 | Sun Aug 23 17:18:25 2009 | Christian Irmler | Pt_ITE512 | pedestal correction | pedcorr008 |  | 23.08.2009  17:17:36 |  | Pt: 1 Grad, HV=200V, 0% RH, intcal, beam off
 ITE512: HV=70V,
 |  | 
| 83 | Sun Aug 23 17:19:50 2009 | Christian Irmler | Pt_ITE512 | internal calibration | cal011 |  | 23.08.2009  16:30:43 | 23.08.2009  17:02:14 | Pt: 1 Grad, HV=200V, 0% RH, intcal, beam off
 ITE512: HV=70V,
 |  | 
| 103 | Tue Aug 25 20:21:31 2009 | Christian Irmler | BELLE | APVDAQ + telescope 40 MHz transparent mode | run042 | 85189 | 25.08.2009  20:18:18 | 26.08.2009  01:27:12 | Belle DUT, HV=80V,  40 MHz, 120 GeV 6 samples, transparent mode
 no cooling
 |  | 
| 104 | Wed Aug 26 01:32:25 2009 | Christian Irmler | BELLE | APVDAQ + telescope 40 MHz transparent mode + cooling | run043 | 100600 | 26.08.2009  01:46:38 | 26.08.2009  07:10:14 | Belle DUT, HV=80V,  40 MHz, 120 GeV 6 samples, transparent mode
 w cooling, chiller set to 13 deg,
 |  | 
| 105 | Wed Aug 26 07:19:42 2009 | Christian Irmler | BELLE | APVDAQ + telescope 31.8 MHz transparent mode + cooling | run044 | 13504 | 26.08.2009  07:18:19 | 26.08.2009  08:46:11  (beam shut down @ 8:00) | Belle DUT, HV=80V,  31.8 MHz, 120 GeV
 6 samples, transparent mode
 |  |