Home CMS Production Clean room MedAustron HEPHY testbeams old

testbeam-rd50-desy-Oct2024 testbeam-RD50-DESY-Apr2024 testbeam-RD50-DESY-Jul2023 testbeam-RD50-CERN-Oct2022 testbeam-DESY-Oct2017 testbeam-DESY-April2017 testbeam-SPS2015 testbeam-SPS2014 testbeam-DESY14 testbeam-SPS12 testbeam-SPS11 testbeam-SPS10 testbeam-SPS09 testbeam-SPS08 LP-TPC

HEPHY logbook for testbeam at SPS September/October 2010, all entries  Not logged in

Find |  Login |  Help

New entries since: Thu Jan 1 01:00:00 1970

Full | Summary | Threaded     -- All entries -- Last day Last 3 Days Last week Last month Last 3 Months Last 6 Months Last Year -- Project -- common CNM BELLE Micron Baby ITE Pt  147 Entries

Goto page 1, 2, 3 ... 6, 7, 8

ID Date Author Project Subject Run Number Events StartTime EndTime Text   108   Sat Oct 9 19:44:36 2010 Markus Friedl common end of success     09.10.2010 19:44:23 NaN        109   Sun Oct 10 15:45:04 2010 Thomas Bergauer common end of success     09.10.2010 19:44:23 NaN  ;-)  genau das gleiche wollte ich auch gerade schreiben!      110   Mon Oct 11 11:18:17 2010 Christian Irmler common end of success     09.10.2010 19:44:23 NaN der Beiweis  :-)      49   Fri Oct 1 09:33:45 2010 Immanuel Gfall common Eudet Hit Correlation, Num Clusters Screenshots 20115 161135 9:30 9:30        115   Thu Mar 31 12:24:24 2011 Manfred Valentan Micron Baby DUT4, source run, post irrad, pre zupf run101 100k 31.03.2011 12:23:00 31.03.2011 12:36:48 DUT4 config file: micronbaby_multi6_irrrad_run101.cfg      114   Thu Mar 31 12:11:04 2011 Manfred Valentan Micron Baby DUT4, source run, post irrad, pre zupf cal101   31.03.2011 12:09:36 31.03.2011 12:17:52 DUT4 config file: micronbaby_single_irrrad_cal101.cfg      113   Thu Mar 31 11:05:39 2011 Manfred Valentan Micron Baby DUT5, source run, post irrad, pre zupf run100 100k 31.03.2011 11:02:17 31.03.2011 11:15:41 DUT5 cal-file: micronbaby_multi6_irrad_run100.cfg      112   Thu Mar 31 10:28:19 2011 Manfred Valentan Micron Baby DUT5, source run, post irrad, pre zupf cal100   31.03.2011 10:24:59 31.03.2011 10:33:15 DUT5 cal-file: micronbaby_single_irrad_cal100.cfg      47   Thu Sep 30 20:47:01 2010 Markus Friedl Micron Baby run run018 26938 30.09.2010 20:45:48 30.09.2010 22:25:25 micron baby: 4 DUTs HV=100V I=13.7uA, I_stop=15.6uA Beam on      46   Thu Sep 30 18:12:53 2010 Markus Friedl Micron Baby run run017 35000 30.09.2010 18:11:53 30.09.2010 20:22:43 micron baby: 4 DUTs HV=100V I=13.5uA, I_stop=17uA Beam on      45   Thu Sep 30 15:39:53 2010 Markus Friedl Micron Baby run run016 31k 30.09.2010 15:38:26 30.09.2010 17:44:36 micron baby: 4 DUTs HV=100V I=10.3uA (start of run);  I=16.2uA (end of run)      43   Thu Sep 30 14:45:16 2010 Thomas Bergauer Micron Baby run run015 22.5k 30.09.2010 13:18:11 30.09.2010 14:38:01 micron baby stack angle scan 15 grad mit 3 modulen HV=100V, I=3.8uA      41   Thu Sep 30 00:56:32 2010 Markus Friedl Micron Baby run run014 100k 30.09.2010 00:55:30 30.09.2010 11:20:02 micron baby stack   HV=100V I=11.0uA      40   Wed Sep 29 19:08:56 2010 Markus Friedl Micron Baby run run013 89853 29.09.2010 19:09:57 30.09.2010 00:52:39 micron baby stack HV=100V I=11.0uA Beam on      36   Wed Sep 29 17:38:15 2010 Thomas Bergauer common EUDET telescope pedestal run 20097 118125 29.09.2010 17:37 29.09.2010 18:09 new pedestal run of EUDET telescope with new JTAG settings of plane 3 (sensor 11) [according to Ingrid]:      35   Wed Sep 29 16:28:17 2010 Thomas Bergauer common EUDET telescope pedestal run 20089 122850 (events built) 29.09.2010 16:27 29.09.2010 17:33  EUDAQ config eudet2-test-6boards-in-2crates rate: ~745.5 Hz        39   Wed Sep 29 19:01:28 2010 Markus Friedl Micron Baby run run012 2248 29.09.2010 18:59:09 29.09.2010 19:07:02 micron baby stack HV=100V I=11.0uA Beam on      34   Wed Sep 29 14:03:55 2010 Markus Friedl BELLE cal cal004 83800 29.09.2010 14:02:25 29.09.2010 14:45:05 Belle stack: Origami-Micron-Micron-Origami HV=100V, Ibias=100µA, beam off      33   Wed Sep 29 11:53:16 2010 Erik Huemer BELLE run run011 19003 29.09.2010 12:19:57 29.09.2010 14:00:57 Belle stack: Origami-Micron-Micron-Origami HV=100V, Ibias=83.22µA, beam      32   Wed Sep 29 11:09:10 2010 Markus Friedl BELLE run run010 30000 29.09.2010 11:08:03 29.09.2010 11:50:07 zero suppressed (HIT5) @ FADC Belle stack: Origami-Micron-Micron-Origami - HIT5      31   Wed Sep 29 10:30:59 2010 Markus Friedl BELLE run run009 30000 29.09.2010 10:27:27 29.09.2010 11:06:35 zero suppressed (HIT4) @ FADC Belle stack: Origami-Micron-Micron-Origami - HIT4      29   Tue Sep 28 23:29:50 2010 Markus Friedl BELLE run run008 140000 28.09.2010 23:29:01 29.09.2010 09:36:58 Belle stack: Origami-Micron-Micron-Origami HV=100V, Ibias=38A, beam on cooling: Origami only, chiller: -25C,      22   Tue Sep 28 14:48:00 2010 Markus Friedl BELLE run run004 1755 28.09.2010 14:48:28 28.09.2010 15:06:31 same as before, but now pos 1 is located on the other edge (-48mm from center) telescope 7 / 30 / 277.5      20   Tue Sep 28 13:04:02 2010 Markus Friedl BELLE run run003 25000 28.09.2010 13:00:05 28.09.2010 14:41:14 now for real (previous run was at wrong position) all same as run001, except position      18   Tue Sep 28 03:06:31 2010 Markus Friedl BELLE run run001 119516 28.09.2010 03:06:04 28.09.2010 12:18:33 first run with complete Belle stack: 2 x Origami, 2 x Micron HV=100V  I=49uA      28   Tue Sep 28 23:24:35 2010 Markus Friedl BELLE run run007 1460 28.09.2010 23:23:29 28.09.2010 23:27:54 Belle stack: Origami-Micron-Micron-Origami HV=100V, Ibias=38A, beam on cooling: Origami only, chiller: -25C,      27   Tue Sep 28 23:23:47 2010 Markus Friedl BELLE run run006 2003 28.09.2010 23:13:22 28.09.2010 23:22:26 channels swapped -> stopped      23   Tue Sep 28 15:09:16 2010 Markus Friedl BELLE run run005 40000 28.09.2010 15:07:08 28.09.2010 20:20:12 previous run stopped due to beam problem (shifted, broad, etc). now recovered, restarting with same      148   Thu May 19 11:04:04 2011 Manfred Valentan Micron Baby DUT4, source run, irrad, postzupf run119 100k 19.05.2011 10:08:14 19.05.2011 10:29:02 DUT4: B2Micron_2826_19_baby4 (combined p-stop) config file: D:/cern10/micronbaby/data_lab/DUT4/postzupf/micronbaby_multi6_irrad_postzupf.cfg  6x    147   Thu May 19 11:02:08 2011 Manfred Valentan Micron Baby DUT4, source run, irrad, postzupf cal119 83800 19.05.2011 09:57:57 19.05.2011 10:06:06 DUT4: B2Micron_2826_19_baby4 (combined p-stop) config file: D:/cern10/micronbaby/data_lab/DUT4/postzupf/micronbaby_single_irrad_postzupf.cfg      146   Thu May 19 09:44:39 2011 Manfred Valentan Micron Baby DUT3, source run, irrad, postzupf run118 100k 19.05.2011 09:07:33 19.05.2011 09:27:21 DUT3: B2Micron_2826_7_baby2 (common p-stop) config file: D:/cern10/micronbaby/data_lab/DUT3/postzupf/micronbaby_multi6_irrad_postzupf.cfg HV=+-50V  6x    145   Thu May 19 09:42:28 2011 Manfred Valentan Micron Baby DUT3, source run, irrad, postzupf cal118 83800 19.05.2011 08:56:18 19.05.2011 09:04:30 DUT3: B2Micron_2826_7_baby2 (common p-stop) config file: D:/cern10/micronbaby/data_lab/DUT3/postzupf/micronbaby_single_irrad_postzupf.cfg HV=+-50V      144   Wed May 18 16:33:29 2011 Manfred Valentan Micron Baby B2Micron_2826_7_baby3, source run, unirrad, prezupf run117 100k 18.05.2011 15:59:39 18.05.2011 16:21:24 B2Micron_2826_7_baby3 (atoll p-stop) config file: D:/cern10/micronbaby/data_lab/7baby3/postzupf/micronbaby_multi6_postzupf.cfg HV=+-50V  6x    143   Wed May 18 16:31:12 2011 Manfred Valentan Micron Baby B2Micron_2826_7_baby3, source run, unirrad, prezupf cal117 83800 18.05.2011 15:44:58 18.05.2011 15:53:10 B2Micron_2826_7_baby3 (atoll p-stop) config file: D:/cern10/micronbaby/data_lab/7baby3/postzupf/micronbaby_single_postzupf.cfg HV=+-50V      142   Wed May 18 15:38:29 2011 Manfred Valentan Micron Baby TRK7, source run, unirrad, postzupf run116 100k 18.05.2011 15:02:05 18.05.2011 15:24:07 TRK7: B2Micron_2826_19_baby2 (common p-stop) config file: D:/cern10/micronbaby/data_lab/TRK7/postzupf/micronbaby_multi6_postzupf.cfg HV=+-50V  6x    141   Wed May 18 15:36:03 2011 Manfred Valentan Micron Baby TRK7, source run, unirrad, postzupf cal116 83800 18.05.2011 14:43:18 18.05.2011 14:51:31 TRK7: B2Micron_2826_19_baby2 (common p-stop) config file: D:/cern10/micronbaby/data_lab/TRK7/postzupf/micronbaby_single_postzupf.cfg HV=+-50V      140   Wed May 18 14:42:49 2011 Manfred Valentan Micron Baby TRK6, source run, unirrad, postzupf run115 100k 18.05.2011 13:53:54 18.05.2011 13:53:54 TRK6: B2Micron_2826_1_baby4 (combined p-stop) config file: D:/cern10/micronbaby/data_lab/TRK6/postzupfzupf/micronbaby_multi6_postzupf.cfg HV=+-50V  6x    139   Wed May 18 14:40:33 2011 Manfred Valentan Micron Baby TRK6, source run, unirrad, postzupf cal115 83800 18.05.2011 13:41:44 18.05.2011 13:49:58 TRK6: B2Micron_2826_1_baby4 (combined p-stop) config file: D:/cern10/micronbaby/data_lab/TRK6/postzupfzupf/micronbaby_single_postzupf.cfg HV=+-50V      149   Thu May 19 11:06:41 2011 Manfred Valentan Micron Baby DUT4, source run, irrad, prezupf run114 100k 18.05.2011 11:57:13 18.05.2011 12:13:12 DUT4: B2Micron_2826_19_baby4 (combined p-stop) config file: D:/cern10/micronbaby/data_lab/DUT4/prezupf/micronbaby_multi6_irrad.cfg      138   Wed May 18 12:06:42 2011 Manfred Valentan Micron Baby DUT4, source run, irrad, prezupf cal114 83800 18.05.2011 11:42:22 18.05.2011 11:50:36 DUT4: B2Micron_2826_19_baby4 (combined p-stop) config file: D:/cern10/micronbaby/data_lab/DUT4/prezupf/micronbaby_single_irrad.cfg      137   Wed May 18 10:38:07 2011 Manfred Valentan Micron Baby DUT3, source run, irrad, prezupf run113 100k 18.05.2011 10:03:15 18.05.2011 10:25:14 DUT3: B2Micron_2826_7_baby2 (common p-stop) config file: D:/cern10/micronbaby/data_lab/DUT3/prezupf/micronbaby_single_irrad.cfg HV=+-50V      136   Wed May 18 10:12:32 2011 Manfred Valentan Micron Baby DUT3, source run, unirrad, prezupf cal113 83800 18.05.2011 09:42:08 18.05.2011 09:50:23 DUT3: B2Micron_2826_7_baby2 (common p-stop) config file: D:/cern10/micronbaby/data_lab/DUT3/prezupf/micronbaby_single_irrad.cfg HV=+-50V      134   Tue May 17 18:53:33 2011 Manfred Valentan Micron Baby B2Micron_2826_7_baby3, source run, unirrad, prezupf run112 100k 17.05.2011 19:00:21 17.05.2011 19:22:45 DUT candidate atoll p-stop B2Micron_2826_7_baby3 (atoll p-stop) config file: D:/cern10/micronbaby/data_lab/7baby3/prezupf/micronbaby_multi6.cfg      133   Tue May 17 18:49:16 2011 Manfred Valentan Micron Baby B2Micron_2826_7_baby3, source run, unirrad, prezupf cal112 83800 17.05.2011 18:50:50 17.05.2011 18:59:04 B2Micron_2826_7_baby3 (atoll p-stop) config file: D:/cern10/micronbaby/data_lab/7baby3/prezupf/micronbaby_single.cfg HV=+-50V      132   Tue May 17 18:33:07 2011 Manfred Valentan Micron Baby GEW8, source run, unirrad, prezupf run111 100k 17.05.2011 18:01:41 17.05.2011 18:23:24 NOT usable as DUT GEW8: B2Micron_2826_7_baby4 (combined p-stop)      131   Tue May 17 17:44:12 2011 Manfred Valentan Micron Baby GEW8, source run, unirrad, prezupf cal111 83800 17.05.2011 17:51:50 17.05.2011 18:00:02 GEW8: B2Micron_2826_7_baby4 (combined p-stop) config file: D:/cern10/micronbaby/data_lab/GEW8/prezupf/micronbaby_single.cfg HV=+-50V      130   Tue May 17 17:43:24 2011 Manfred Valentan Micron Baby TRK7, source run, unirrad, prezupf run110 100k 17.05.2011 15:39:37 17.05.2011 16:02:54 DUT candidate common p-stop TRK7: B2Micron_2826_19_baby2 (common p-stop)      129   Tue May 17 15:10:52 2011 Manfred Valentan Micron Baby TRK7, source run, unirrad, prezupf cal110 83800 17.05.2011 15:16:25 17.05.2011 15:24:35 TRK7: B2Micron_2826_19_baby2 (common p-stop) config file: D:/cern10/micronbaby/data_lab/TRK7/prezupf/micronbaby_single.cfg HV=+-50V      128   Tue May 17 14:37:23 2011 Manfred Valentan Micron Baby TRK6, source run, unirrad, prezupf run109 100k 17.05.2011 14:34:32 17.05.2011 15:00:02 DUT candidate combined p-stop TRK6: B2Micron_2826_1_baby4 (combined p-stop)      127   Tue May 17 14:36:36 2011 Manfred Valentan Micron Baby TRK6, source run, unirrad, prezupf cal109 83800 17.05.2011 14:18:13 17.05.2011 14:34:25 TRK6: B2Micron_2826_1_baby4 (combined p-stop) config file: D:/cern10/micronbaby/data_lab/TRK6/prezupf/micronbaby_multi6.cfg HV=+-50V      126   Tue May 17 14:01:45 2011 Manfred Valentan Micron Baby TRK2, source run, unirrad, prezupf run108 100k 17.05.2011 13:28:48 17.05.2011 13:51:16 No DUT candidate (atoll p-stop) TRK2: B2Micron_2826_1_baby3 (atoll p-stop)      125   Tue May 17 13:31:32 2011 Manfred Valentan Micron Baby TRK2, source run, unirrad, prezupf cal108 83800 17.05.2011 13:17:17 17.05.2011 13:25:27 TRK2: B2Micron_2826_1_baby3 (atoll p-stop) config file: D:/cern10/micronbaby/data_lab/TRK2/prezupf/micronbaby_single.cfg HV=+-50V      124   Tue May 17 13:08:08 2011 Manfred Valentan Micron Baby TRK1, source run, unirrad, prezupf run107 100k 17.05.2011 12:39:34 17.05.2011 13:03:05 DUT candidate common p-stop TRK1: B2Micron_2826_1_baby2 (common p-stop)      123   Tue May 17 13:02:34 2011 Manfred Valentan Micron Baby TRK1, source run, unirrad, prezupf cal107 83800 17.05.2011 12:20 17.05.2011 12:35 TRK1: B2Micron_2826_1_baby2 (common p-stop) config file: D:/cern10/micronbaby/data_lab/TRK1/prezupf/micronbaby_single.cfg HV=+-50V      119   Wed Apr 13 12:13:09 2011 Manfred Valentan Micron Baby DUT5, source run, post irrad, post zupf ** DO NOT USE ** cal105 83800 13.04.2011 12:02:41 13.04.2011 12:10:55 DUT5 (atoll), each second bond removed to simulate intermediate strips config file: D:/cern10/micronbaby/data_lab/DUT5/micronbaby_single_irrrad.cfg      121   Wed May 11 16:28:07 2011 Manfred Valentan Micron Baby DUT5, source run, post irrad, post zupf run106 100k 11.05.2011 16:00 11.05.2011 16:25 DUT5 (atoll) config file: D:/cern10/micronbaby/data_lab/DUT5/micronbaby_multi6_irrrad.cfg HV=+-50V      122   Wed May 11 16:28:20 2011 Manfred Valentan Micron Baby DUT5, source run, post irrad, post zupf cal106 100k 11.05.2011 16:00 11.05.2011 16:25 DUT5 (atoll) config file: D:/cern10/micronbaby/data_lab/DUT5/micronbaby_multi6_irrrad.cfg HV=+-50V      118   Mon Apr 11 18:37:28 2011 Manfred Valentan Micron Baby DUT5, source run, post irrad, pre zupf run104 100k 11.04.2011 18:25:28 11.04.2011 18:32:11 DUT5 (atoll) config file: D:/cern10/micronbaby/data_lab/DUT5/micronbaby_multi6_irrrad.cfg HV=+-50V      117   Mon Apr 11 18:25:35 2011 Manfred Valentan Micron Baby DUT5, source run, post irrad, pre zupf cal104 83800 11.04.2011 18:12:38 11.04.2011 18:20:50 DUT5 (atoll) config file: D:/cern10/micronbaby/data_lab/DUT5/micronbaby_single_irrrad.cfg HV=+-50V      106   Sat Oct 9 15:29:09 2010 Markus Friedl BELLE run run058 30000 09.10.2010 15:26:50 09.10.2010 16:21:37 Origami1 (n-side only) + Micron1 (non-irrad) angle scan: 73 - now with multi6 (previous      105   Sat Oct 9 12:25:36 2010 Thomas Bergauer BELLE run run057 276475 09.10.2010 12:22:21 09.10.2010 15:08:46   Origami1 (n-side only) + Micron1 (non-irrad)      103   Sat Oct 9 00:17:02 2010 Markus Friedl BELLE run run056 225k 09.10.2010 00:15:53 09.10.2010 09:54:28 Belle stack w/o Origami2 after irradiation HV=80V / I_start=255 µA, I_stop=243 µA        102   Fri Oct 8 23:43:07 2010 Christian Irmler BELLE run run055 12316 08.10.2010 23:42:51 09.10.2010 00:14:56 Belle stack w/o Origami2 after irradiation HV=80V / 255 µA  cooling: Origami only, chiller set      99   Fri Oct 8 18:12:43 2010 Markus Friedl BELLE run run054 90000 08.10.2010 18:08:48 08.10.2010 21:49:36 Belle stack w/o Origami2 after irradiation HV=80V I=224uA (beginning of run) 2 suspicious APVs on Micron n side      98   Fri Oct 8 18:12:15 2010 Christian Irmler BELLE run run053 98000 08.10.2010 00:33:14 08.10.2010 13:36:57 Belle stack w/o Origami2 after irradiation HV=80V Telescope position 55/30/277.5      96   Wed Oct 6 23:48:49 2010 Markus Friedl BELLE run run052 165789 06.10.2010 23:47:12 07.10.2010 08:43:42 Belle stack without Origami2 HV=80V I=217uA telescope setting 103 / 30 / 277.5      95   Wed Oct 6 23:03:15 2010 Marko Dragicevic BELLE cal cal014 83800 06.10.2010 23:01:56 06.10.2010 23:34:07 Belle stack without Origami2 HV=80V I=227uA beam on      93   Wed Oct 6 16:33:55 2010 Markus Friedl Micron Baby run run051 90000 06.10.2010 16:32:03 06.10.2010 20:59:58 8 x Micron Baby (3 irradiated), no cooling HV=100V I=209uA (start of run, still rising); 203uA (end of run)      92   Wed Oct 6 11:59:29 2010 Markus Friedl Micron Baby run run050 90000 06.10.2010 11:57:55 06.10.2010 15:30:37 8 x Micron Baby (3 irradiated), no cooling HV=100V I=141uA (start of run) beam on      91   Wed Oct 6 11:51:25 2010 Thomas Bergauer Micron Baby run run049 4489 06.10.2010 11:38:21 06.10.2010 11:49:23 8 x Micron Baby (3 irradiated), no cooling HV=100V I=141uA (start of run) beam on  not yet optimized XY-table positions      88   Tue Oct 5 18:13:05 2010 Christian Irmler ITE run run048 533125 05.10.2010 18:14:57 06.10.2010 09:27:44 6 x SILC + 2 x ITE HV=100V telescope position: 124/48      87   Tue Oct 5 17:50:23 2010 Christian Irmler ITE cal cal012 83800 05.10.2010 17:50:26 05.10.2010 18:09:48 6 x SILC + 2 x ITE HV=100V telescope position: 124/48      85   Tue Oct 5 10:20:30 2010 Manfred Valentan BELLE run run46 350000 05.10.2010 01:00:00 05.10.2010 10:16:07 angle scan Origami 1 and  Micron wedge 1 HV = 100V      84   Mon Oct 4 23:59:05 2010 Manfred Valentan BELLE run run45   04.10.2010 ??:??:?? 05.10.2010 00:56:48 angle scan Origami 1 and  Micron wedge 1 HV = 100V      86   Tue Oct 5 10:23:09 2010 Manfred Valentan BELLE run run47 30000 05.10.2010 10:21:20 05.10.2010 angle scan Origami 1 and  Micron wedge 1 HV = 100V      76   Mon Oct 4 12:50:13 2010 Erik Huemer Pt run run039 --> run out of air --> repeat 25600 04.10.2010 12:45:17 04.10.2010 14:00:00 Pt modules, angle scan h01-Pt and h02-Pt currents: h01=26.0A h02=13.4A      71   Mon Oct 4 00:08:55 2010 Manfred Valentan Pt run run034 187000 04.10.2010 00:03:18 04.10.2010 09:22:07 Pt modules, angle scan h01-Pt and h02-Pt currents: h01=21.9A h02=7.5A      70   Sun Oct 3 22:53:49 2010 Manfred Valentan Pt run run033 25600 03.10.2010 22.47:38 04.10.2010 00:02:37 Pt modules, angle scan h01-Pt and h02-Pt currents: h01=22.9A h02=6.9A      82   Mon Oct 4 21:01:25 2010 Christian Irmler BELLE run run43 30000 04.10.2010 20:59:48 04.10.2010 23:04:24 angle scan Origami 1 and  Micron wedge 1 HV = 100V      83   Mon Oct 4 23:12:16 2010 Manfred Valentan BELLE run run44 30000 04.10.2010 23:?:? 04.10.2010 23.57.23 angle scan Origami 1 and  Micron wedge 1 HV = 100V      79   Mon Oct 4 16:15:48 2010 Christian Irmler Pt run run042 25600 04.10.2010 16:12:52 04.10.2010 16:35:18 Pt modules, angle scan h01-Pt and h02-Pt currents: h01=28.1A h02=2.4A      77   Mon Oct 4 14:15:22 2010 Manfred Valentan Pt run run040 --> unusable --> no bias 25600 04.10.2010 14:?:? 04.10.2010 14:32:14 Pt modules, angle scan h01-Pt and h02-Pt currents: h01=26.0A h02=13.4A      75   Mon Oct 4 12:24:38 2010 Erik Huemer Pt run run038 25600 04.10.2010 12:22:09 04.10.2010 12:43:40 Pt modules, angle scan h01-Pt and h02-Pt currents: h01=26.6A h02=13.1A      74   Mon Oct 4 11:43:05 2010 Christian Irmler Pt run run037 25600 04.10.2010 11:40:15 04.10.2010 12:15:03 Pt modules, angle scan h01-Pt and h02-Pt currents: h01=25.4A h02=13.1A      73   Mon Oct 4 10:43:45 2010 Marko Dragicevic Pt run run036 25600 04.10.2010 10:33:05 04.10.2010 11:35:51 Pt modules, angle scan h01-Pt and h02-Pt currents: h01=24.9A h02=12.5A      69   Sun Oct 3 21:49:19 2010 Erik Huemer Pt run run032 25600 03.10.2010 21:44:30 03.10.2010 22.40.07 Pt modules, angle scan h01-Pt and h02-Pt currents: h01=22.9A h02=6.9A      63   Sun Oct 3 08:19:13 2010 Markus Friedl ITE run run029 75000 03.10.2010 08:33:28 03.10.2010 10:50:27 same as previous run telescope run 20127 Configuration file for DAQ: cern10_ite_silc_single.cfg      61   Sat Oct 2 18:36:57 2010 Markus Friedl ITE run run028 162263 02.10.2010 18:34:06 03.10.2010 08:11:13 6 x SILC + 2 x ITE HV=100V telescope position: 119      60   Sat Oct 2 17:35:51 2010 Markus Friedl ITE run run027 2999 02.10.2010 17:34:51 02.10.2010 17:38:39 2 x SILC + 2 x ITE HV=100V telescope position: 107      58   Sat Oct 2 17:24:12 2010 Markus Friedl ITE run run026 5834 02.10.2010 17:23:46 02.10.2010 17:31:51 2 x SILC + 2 x ITE HV=100V        55   Sat Oct 2 09:57:20 2010 Thomas Bergauer CNM run run025 150k 02.10.2010 09:54:28 02.10.2010 14:21:20  CMN-SILC stack HV_SILC (Katze)=75V, 0.25uA (6 SiLC) HV_CNM (Keithley)=30V, CNM_1=84nA,      54   Fri Oct 1 23:55:12 2010 Thomas Bergauer CNM run run024 320k 01.10.2010 23:53:12 02.10.2010 09:47:37 CMN-SILC stack HV_SILC (Katze)=75V, 0.25uA (6 SiLC) HV_CNM (Keithley)=30V, CNM_1=84nA,      48   Thu Sep 30 23:09:29 2010 Thomas Bergauer Micron Baby run run019 162000 30.09.2010 23:08:03 01.10.2010 9:33:38 micron baby: 4 DUTs HV=100V I=12uA I_stop=15.4uA Beam on      50   Fri Oct 1 09:42:02 2010 Erik Huemer Micron Baby run run020 1843 01.10.2010 09:59:09 01.10.2010 10.05 micron baby: 4 DUTs HV=100V I=10.9uA Beam on      53   Fri Oct 1 23:50:28 2010 Thomas Bergauer CNM run run023 2275 01.10.2010 23:49:29 01.10.2010 23:53:12 CMN-SILC stack HV_SILC (Katze)=75V, 0.25uA (6 SiLC) HV_CNM (Keithley)=30V, CNM_1=84nA,      52   Fri Oct 1 23:18:34 2010 Markus Friedl CNM run run022 8139 01.10.2010 23:17:02 01.10.2010 23:45:51 CMN-SILC stack HV_SILC (Katze)=75V, 0.25uA (6 SiLC) HV_CNM (Keithley)=30V, CNM_1=84nA,      51   Fri Oct 1 10:06:59 2010 Manfred Valentan Micron Baby run run021 75000 01.10.2010 10:07:37 01.10.2010 15:24:44 micron baby: 4 DUTs HV=100V I=10.9uA (beginning)  13.6uA (end of run)      1   Wed Sep 15 10:25:13 2010 Marko Dragicevic common Equipment List         [B]Slow Control:[/B] 3x Source Measurement Unit Keithley K2410 -- Inv.Nr.: 540-702, 1000EUR      3   Thu Sep 23 15:32:28 2010 Manfred Valentan Micron Baby Modul B2Micron_2826_7_Baby4 -> UNBRAUCHBAR         p-side: Hybrid 42 APV2: viele gerissene bonds der inneren Bondreihe  6x    4   Thu Sep 23 15:37:54 2010 Manfred Valentan Micron Baby Modul B2Micron_2826_19_Baby4 -> TRACKING & best DUT candidate         p-side: Hybrid 48 alles ok n-side: Hybrid 35 (wurde repariert,  6x    5   Thu Sep 23 15:54:20 2010 Manfred Valentan Micron Baby Modul B2Micron_2826_19_Baby3 -> DUT & TRACKING         p-side: Hybrid 47 alles ok n-side: Hybrid 38  6x    6   Thu Sep 23 16:00:31 2010 Manfred Valentan Micron Baby Modul B2Micron_2826_19_Baby2 -> TRACKING         p-side: Hybrid 46 alles ok n-side: Hybrid 37  6x    7   Thu Sep 23 16:01:10 2010 Manfred Valentan Micron Baby Modul B2Micron_2826_7_Baby3 -> DUT         p-side: Hybrid 40 APV3: letzte 10 Streifennicht gebondet, ging sich beim Prototyp-Modul an der Stelle  6x    8   Thu Sep 23 16:12:54 2010 Manfred Valentan Micron Baby Modul B2Micron_2826_7_Baby2 -> DUT & TRACKING         p-side: Hybrid 41 alles ok n-side: Hybrid 31  6x    9   Thu Sep 23 16:19:54 2010 Manfred Valentan Micron Baby Modul B2Micron_2826_1_Baby4, DUT EINGESCHRAENKT, TRACKING         p-side: Hybrid 45 APV0: beide Randstreifen schlecht APV1: Streifen 0 schlecht  6x    10   Thu Sep 23 16:22:33 2010 Manfred Valentan Micron Baby Modul B2Micron_2826_1_Baby3, TRACKING         p-side: Hybrid 44 alles ok n-side: Hybrid 34  6x    11   Thu Sep 23 16:23:07 2010 Manfred Valentan Micron Baby Modul B2Micron_2826_1_Baby2, DUT (eingeschraenkt) & TRACKING         p-side: Hybrid 43 APV3: Streifen 9 schlecht n-side: Hybrid 33  6x    12   Fri Sep 24 12:09:32 2010 Manfred Valentan BELLE gds-file of Micron wafer                13   Mon Sep 27 15:39:33 2010 Thomas Bergauer common PI-XY Table         M-521.dd: (links/rechts) downstream rechts => pos. limit [0]      14   Mon Sep 27 15:41:28 2010 Thomas Bergauer common Szintillatoren         1: breit  (1) 2: schmal (2) 3: breit  (4)      15   Mon Sep 27 15:42:09 2010 Thomas Bergauer common TLU: wir stecken auf DUT 3         TLUControl.exe ist auf zenpixell3 unter /home/eudet/eudaq/bin TLUControl.exe      16   Mon Sep 27 18:54:47 2010 Thomas Bergauer BELLE XY Position         center position: 55/40/277,5      17   Tue Sep 28 01:13:57 2010 Markus Friedl BELLE cal cal001 83800 28.09.2010 01:11:20   first intcal with complete Belle stack: 2 x Origami, 2 x Micron HV=100V  I=49uA      19   Tue Sep 28 12:54:33 2010 Markus Friedl BELLE run run002   28.09.2010 12:46:54   same as run001 after shifting x by 48mm 103 / 30 / 277.5 ? unsure after crash of xy stage PC      21   Tue Sep 28 14:38:24 2010 Christian Irmler BELLE Temperature sensors Belle stack         PicoLogic TC-08 temperature sensor assignment Belle stack: Sensor type: K      24   Tue Sep 28 16:50:31 2010 Thomas Bergauer common serial connection chiller          Der chiller braucht ein gekreuztes serielles Kabel!!      25   Tue Sep 28 22:07:16 2010 Markus Friedl BELLE cal cal002 DO NOT USE -> go to cal003 83800 28.09.2010 22:01:55   Belle stack (Origami, Micron, Micron, Origami) now cooling only for Origami, Micron are uncooled      26   Tue Sep 28 22:09:39 2010 Markus Friedl BELLE Temperature sensors Belle stack         PicoLogic TC-08 temperature sensor assignment Belle stack: Sensor type: K      30   Wed Sep 29 09:39:33 2010 Markus Friedl BELLE cal cal003 83800 29.09.2010 09:38:00   same as cal002, but now with corrected readout order      37   Wed Sep 29 17:38:19 2010 Markus Friedl Micron Baby cal cal005 83800 29.09.2010 17:36:38   micron baby stack HV=100V I=6.5uA Beam off      38   Wed Sep 29 18:53:05 2010 Thomas Bergauer Micron Baby XY Positions         center position: 113/47/7.5 top left (direction jura): 121/53.5/7.5 bottom right (direction saleve):      42   Thu Sep 30 10:56:34 2010 Christian Irmler common Room numbers         Room and telefone numbers.        44   Thu Sep 30 15:06:28 2010 Markus Friedl Micron Baby cal cal006 83800 30.09.2010 15:01:56   micron baby: 4 DUTs - angle scan HV=100V I=6.8uA Beam off (turned on at ~8k events)      56   Sat Oct 2 15:24:00 2010 Erik Huemer ITE XY Position and Slow Control         center position: 119/48/187,5        59   Sat Oct 2 17:27:14 2010 Thomas Bergauer ITE cal cal007 83800 02.10.2010 17:11:18   ITE: 2 DUTs 2 x SILC + 2 x ITE      62   Sun Oct 3 08:14:39 2010 Markus Friedl ITE cal cal008 83800 03.10.2010 08:13:06   6 x SILC + 2 x ITE HV=100V telescope position: 119      64   Sun Oct 3 14:35:12 2010 Marko Dragicevic CNM cal cal009 83800 03.10.2010 13:50:54   CMN-SILC stack HV_SILC (Katze)=75V, 0.25uA (6 SiLC) HV_CNM (Keithley)=30V, CNM_1=84nA,      65   Sun Oct 3 16:23:20 2010 Erik Huemer Pt XY/R Position         centerposition: 119/43/187,5 27 grad: 214,5      66   Sun Oct 3 18:23:27 2010 Christian Irmler Pt cal cal010 83800 03.10.2010 18:26:49   pt modules angle scan h01-Pt and h02-Pt currents: h01=23.1µA h02=10.4µA      67   Sun Oct 3 18:52:56 2010 Christian Irmler Pt run run030 25600 03.10.2010 19:16:29   Pt modules, angle scan h01-Pt and h02-Pt currents: h01=23.1A h02=10.4A      68   Sun Oct 3 20:44:40 2010 Erik Huemer Pt run run031 25600 03.10.2010 19:42:34   Pt modules, angle scan h01-Pt and h02-Pt currents: h01=20.5A h02=6.5A      72   Mon Oct 4 09:31:25 2010 Manfred Valentan Pt run run035 25600 04.10.2010 09:28:40   Pt modules, angle scan h01-Pt and h02-Pt currents: h01=24.7A h02=11.8A      78   Mon Oct 4 15:39:34 2010 Christian Irmler Pt run run041 25600 04.10.2010 15:46:22   Pt modules, angle scan h01-Pt and h02-Pt currents: h01=26.0A h02=13.4A      80   Mon Oct 4 16:29:36 2010 Christian Irmler common beam settings         beam settings optimized by beamline operator wire champer display fixed      81   Mon Oct 4 20:16:19 2010 Christian Irmler BELLE cal cal011 83800 04.10.2010 20:15:00   angle scan Origami 1 and  Micron wedge 1 HV = 100V      89   Wed Oct 6 10:15:26 2010 Marko Dragicevic Micron Baby XY Positions After Irradiation         center position: 119/50/(7.5) top left (direction jura, bottom right on sensor): 127/56.5/7.5      90   Wed Oct 6 11:03:59 2010 Marko Dragicevic Micron Baby cal cal013 83800 06.10.2010 11:03:12   8 x Micron Baby (3 irradiated), no cooling HV=100V I=115uA (start of run) beam off      94   Wed Oct 6 23:02:09 2010 Marko Dragicevic common Beam Configuration         Beam Settings and Profile on 5.10.2010 - 17:00h Saved as: H6B.801      97   Fri Oct 8 17:26:36 2010 Markus Friedl BELLE cal cal015 83800 08.10.2010 17:22:44   Belle stack without Origami2 HV=11V I=32uA beam on      100   Fri Oct 8 23:05:03 2010 Markus Friedl BELLE cal cal016 83800 08.10.2010 23:03:16   Belle stack w/o Origami2 after irradiation HV=80V / 258 µA  cooling: Origami only, chiller set      101   Fri Oct 8 23:22:32 2010 Manfred Valentan BELLE Schnittwinkel barrel vs. slanted         17deg acceptance => Schnittwinkel barrel option = 90-17 = 73deg      ----->  rotary table 80.5      104   Sat Oct 9 12:00:55 2010 Christian Irmler BELLE cal cal017 83800 09.10.2010 11:59:37   Origami1 (n-side only) + Micron1 (non-irrad) angle scan: 73° HV=100V / 40 µA       107   Sat Oct 9 18:56:35 2010 Thomas Bergauer common path to telescope data         eudetmac001.cern.ch path is /Volumes/Data/eudet/Data/cern_2010_sept_silc_apvdaq (Vienna system)      111   Tue Oct 19 14:58:56 2010 Manfred Valentan Micron Baby geometry                116   Fri Apr 8 13:25:58 2011 Manfred Valentan Micron Baby sensors and modules         TRK1: B2Micron_2826_1_baby2 TRK2: B2Micron_2826_1_baby3 DUT3: B2Micron_2826_7_baby2 (common      120   Wed May 4 15:14:31 2011 Thomas Bergauer Pt info about module         pt-Modul hat jeweils zwei OB1 Sensoren von STM (mit 122um Pitch) im Abstand von 2mm uebereinander      135   Tue May 17 19:08:29 2011 Manfred Valentan Micron Baby sensors for source test with intermediate strips         Every second bond of these sensors will be removed to mimic the effect of an intermediate strip. For comparison, this is done both

Goto page 1, 2, 3 ... 6, 7, 8

ELOG V3.1.5-fc6679b