| ID |
Date |
Author |
Project |
Subject |
Run Number |
Events |
XYPosition |
Cooling |
Data |
|
51
|
Mon Jun 8 11:57:14 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run with TLU and Telescope | hw058 | 50000 | 10 | No | Good |
RUN WITH SVD3 plus telescope
EUDET Run 58
Mimosa Threshold 6
Pos 10: x= 136.08mm, y=68.9 mm (narrow side down) |
|
54
|
Mon Jun 8 15:49:23 2015 |
Benedikt Würkner | SVD3 (H6B) | Hardware FEI4 | 60 | 50000 | 10 | No | Unknown |
Hardware run with FEI4, Telescope and FW&BW Modules
Pos 10: x= 136.08mm, y=68.9 mm (narrow side down)
Bilder: Hitmap FE-I4 und Correlation zw. Mimosa und FE-I4 |
| Attachment 1: Screenshot_2015-06-08_17.59.50.png
|
 |
| Attachment 2: Screenshot_2015-06-08_17.41.03.png
|
 |
|
84
|
Wed Jun 10 20:54:36 2015 |
Benedikt Würkner | SVD3 (H6B) | Residuals FE-I4 (Upstream) | 59 | | 10 | No | Good |
|
| Attachment 1: run000059-fitter-residuals.pdf
|
|
6
|
Thu Jun 4 15:12:41 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 001 | 50000 | 1 | No | Good |
PedestalRun001, FIRRun001, room temp
telescope n-side switched.
In order to correct the position change the |
| Attachment 1: BW_p-side_001Result.pdf
|
| Attachment 2: BW_n-side_001Result.pdf
|
| Attachment 3: L6_p-side_001ModProp.pdf
|
| Attachment 4: L6_n-side_001ModProp.pdf
|
| Attachment 5: L6_p-side_001Result.pdf
|
| Attachment 6: L5_p-side_001ModProp.pdf
|
| Attachment 7: L6_n-side_001Result.pdf
|
| Attachment 8: L5_n-side_001ModProp.pdf
|
| Attachment 9: L5_p-side_001Result.pdf
|
| Attachment 10: L3_p-side_001ModProp.pdf
|
| Attachment 11: L5_n-side_001Result.pdf
|
| Attachment 12: L3_p-side_001Result.pdf
|
| Attachment 13: L3_n-side_001ModProp.pdf
|
| Attachment 14: L3_n-side_001Result.pdf
|
| Attachment 15: L4_p-side_001ModProp.pdf
|
| Attachment 16: L4_n-side_001ModProp.pdf
|
| Attachment 17: L4_p-side_001Result.pdf
|
| Attachment 18: L4_n-side_001Result.pdf
|
| Attachment 19: BW_p-side_001ModProp.pdf
|
| Attachment 20: BW_n-side_001ModProp.pdf
|
|
33
|
Sun Jun 7 13:18:20 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run with TLU and Telescope | hw008 | 53670 | 1 | No | Good |
FIRST GOOD RUN WITH SVD3 plus telescope
EUDET Run 49
Mimosa Threshold 7
Offset APVDAQ-TLU Event number: 601
Pos 1: x=100 mm, y=79 mm (Hits in APV 3 und 8-9 in p-Seite und 14 und 17 in n-Seite) |
|
65
|
Tue Jun 9 09:57:56 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 019 | 62k | 1 | No | Good |
room temp
FIRRun002, PedestalRun007, Calibrationrun003 |
|
82
|
Wed Jun 10 19:05:04 2015 |
Benedikt Würkner | SVD3 (H6B) | Hardware FEI4 | 71 | 50000 | 1 | No | Unknown |
RUN WITH SVD3, telescope and FEI4
EUDET Run 71
Mimosa Threshold 6
Pos 1: x=100 mm, y=79 mm (Hits in APV 3 und 8-9 in p-Seite und 14 und 17 in n-Seite )
Downstream FEI4 used |
|
85
|
Wed Jun 10 21:36:25 2015 |
Benedikt Würkner | SVD3 (H6B) | Horizontal Beam Profile Run | 72 | 50000 | 1 | No | Good |
Trying to get a nice plot of the beam profile by only using the and 3 (horizontal) see http://elog.hephy.at/testbeam-SPS2015/66 for details.
Pos 1: x=100 mm, y=79 mm (Hits in APV 3 und 8-9 in p-Seite und 14 und 17 in n-Seite )
Producer.TLU Config Change:
|
| Attachment 1: HW_072_002_Result.pdf
|
| Attachment 2: HW_072_003_Result.pdf
|
| Attachment 3: HW_072_000_Result.pdf
|
| Attachment 4: HW_072_001_Result.pdf
|
|
99
|
Fri Jun 12 17:11:45 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 026 | 50k | 1 | No | Good |
room temp
FIRRun002,
PedestalRun012,
CalibrationRun003
L3 rotated.
taget: bw, pos 1
|
|
104
|
Sat Jun 13 17:05:35 2015 |
Benedikt Würkner | SVD3 (H6B) | L3 with FEI4 | 84 | 30000 | 1 | No | Good |
L3 sensor at position x: 105, y: 47 hitting apvs: 2&3 on p-side and apv 3 on n-side |
| Attachment 1: Telescope_with_L3.png
|
 |
|
108
|
Sat Jun 13 19:29:50 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 030 | | 1 | No | Good |
room temp
FIRRun002,
PedestalRun012,
CalibrationRun003
wo L3 and L4
taget: bw, pos 1
|
|
1
|
Tue May 12 10:27:39 2015 |
Benedikt Würkner | SVD3 (H6B) | Setup information | | | | | Unknown |
Information concerning the SVD3 setup during a beam test
In the beam area setup the whole crate and the power supply with the usual spider cable and the two Keithly 2410 high voltage supplies. Monitoring of the 2410 happens via a NI MAX interface that connects to the GPIB-Ethernet interface and needs to be configured there. The IP and password are noted on the device. The software can be found on heros in medialib/LONGTERM/longterm R3.1_doubleSided as a normal *.vi file.
Default adresses 16 and 17 as defined in labview, need to figure out on site which is which, if the voltage selected (e.g. 100V) is applied as +50/-50 or if it is applied as +100/-100 before connecting the cables.
Take a run without dut as well to check the telescope integrity. Without dut in beamline!!!!! |
| Attachment 1: spider-config.jpg
|
 |
|
2
|
Wed Jun 3 10:48:42 2015 |
Benedikt Würkner | common | Networking | | | | | Unknown |
WLAN Router:
SSID: Hephy
password: 20supersecret14
DHCP Range: 192.168.0.200 to 239
Netmask: /24
DNS Server: 192.168.0.254
Gateway: 192.168.0.254
external IP: 128.141.174.109 (für diverse Port Forwardings)
Manuell vergebene IP Adressen bitte unbedingt Benni mitteilen oder/und in der folgenden Tabelle eintragen!
IP/MAC Zuweisung:
| IP |
Machine/Name |
intern |
Port Forwarding (aussen) |
| 192.168.0.124 |
SVD Kenwood |
VNC(5900) |
VNC(9000) |
| 192.168.0.11 |
SVD3 DAQ |
VNC(5900) |
VNC(9001) |
| 192.168.0.12 |
TUX DAQ |
VNC(5900), VNC(5901), SSH(22) |
VNC(9009), VNC(9002), SSH(9003), |
| 192.168.0.13 |
Belle XY Tisch |
|
|
| 192.168.0.14 |
TUXOA |
SSH(22), VNC(5900) |
SSH(9004), VNC(9012) |
| 192.168.0.20 |
JTAG Server |
|
|
| 192.168.0.148 |
alixcool |
|
|
| 192.168.0.16 |
slowcontrol |
VNC(5900) |
VNC(9005) |
| 192.168.0.144 |
CAEN Power supply |
|
|
| 192.168.0.17 |
zenpixelwiki |
SSH(22), VNC(5900) |
SSH(9006), VNC(9008) |
| 192.168.0.18 |
TLU (pcx25042, XY) |
VNC(5900) |
VNC(9007) |
| 192.168.0.19 |
Cooling control PC |
VNC(5900) |
VNC(9011) |
| 192.168.0.240 |
NI GPIB - ENET / 1000 |
|
|
| 192.168.0.150 |
Printserver |
VNC(5900) |
VNC(9010) |
| |
|
|
|
| 137.138.113.254 |
Aida PC |
|
vnc(5900) |
Admin Zugang Wlan Router:
IP: 192.168.0.254
Username: admin
password: Hephy2014
|
|
3
|
Wed Jun 3 17:23:07 2015 |
Thomas Bergauer | Belle II FADC (H6A) | XY stage positions | | | | | Unknown |
x-Achse: positiv Richtung Saleve (counting room)
y-Achse: positiv Richtung UNTEN!!
position of laddertestbox xy stages:
Rev. Pos (BWD Sensor, BWD, Oben) x= 82.3, y=110.6
Mitte Sensor:
Pos 1: (mitte BWD sensor): x=144.74, y=80.8
Pos 2: (mitte Origami -z): x=269.62, y=80.8
Pos 3: (mitte Origami ce): x=394.42, y=80.8
Pos 4 (mitte FWD Micron Sensor): x=517, y=80.8
Ecke:
Pos 5 (Ecke BWD sensor): x=92.3, y=105.6
Pos 6 (Ecke Origami -z): x=217.18, y=105.6
Pos 7 (Ecke Origami ce): x=342.06, y=105.6
Pos 8 (Ecke FWD sensor): x=467,62, y=56,3
Pos 9 (Ecke FWD sensor): x=568,33 y=64,48 |
| Attachment 1: L5_Class_B-.PNG
|
 |
|
4
|
Thu Jun 4 14:15:50 2015 |
Hao Yin | Belle II FADC (H6A) | FIR | 001 | | | | Good |
FIR filer and ADC delay with all sensor and telescope.
telescope n-side switched. |
|
5
|
Thu Jun 4 14:16:20 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 001 | 10000 | | | Good |
FirRun001, room temp
telescope n-side switched. |
|
8
|
Thu Jun 4 18:45:42 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 003 | 10000 | | | Good |
firrun003, room temp
|
|
9
|
Thu Jun 4 18:49:03 2015 |
Benedikt Würkner | SVD3 (H6B) | Setup | | | | | Unknown |
|
| Attachment 1: IMG_20150604_184442.jpg
|
 |
| Attachment 2: IMG_20150604_184451.jpg
|
 |
| Attachment 3: IMG_20150604_184516.jpg
|
 |
|
12
|
Fri Jun 5 12:02:29 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 001 | | | | Good |
room temp max subevent at 2. with lat = 96 |
|
13
|
Fri Jun 5 12:03:34 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 002 | | | | Good |
lat = 97 to a greater range of lat scan |