| ID | 
Date | 
Author | 
Project | 
Subject | 
Run Number | 
Events | 
StartTime  | 
EndTime | 
Data | 
 
| 
  79  
 | 
Tue Oct 30 22:15:41 2012 | 
Markus Friedl | MicronOrigami_gross | run | run041 | 100k | 30.10.2012  22:09:13 |   | Unknown |  Cooling for 2DSSD established after some struggle. 
2DSSD fully read out with cooling 
HV= +40 V -40 V    I =  1.84 uA 
Beam position:  
Origami ce: 
   p-side:  APV #10  (= pos 4)  
   n-side:  APV #19  (= pos 3) 
Positions of thermal sensors: 
11   Kapillare Anfang 
12   Kapillare Ende 
13   --- 
14   unmittelbar nach Kapillare 
15   Origami in 
16   Origami out 
17   Origami -z 
18   Origami CE 
  
Strip order: 
n-Seite: rechts (Salev) nach links (Jura) 
p-Seite: oben nach unten 
  
APV chips with lower noise: 
                          -z                                   ce 
p-side             #5                                #10 (= pos 4) 
n-side             #13 (= pos1)             #19 (= pos 3) 
  
  
   |  
| Attachment 1: temperatures_run041.jpg
 |    |  
| 
  78  
 | 
Tue Oct 30 18:35:51 2012 | 
Christian Irmler | MicronOrigami_gross | run | run040 | 100k | 30.10.2012  18:23:21 | 30.10.2012  21:55:53  | Unknown |  Cooling for 2DSSD established after some struggle. 
2DSSD fully read out with cooling 
HV= +40 V -40 V    I = 2.1 uA 
 
Beam position:  
  Origami -z   
  p-side: APV #5   
  n-side: APV #13 (= pos.1 of -z) 
  
Positions of thermal sensors: 
11   Kapillare Anfang 
12   Kapillare Ende 
13   --- 
14   unmittelbar nach Kapillare 
15   Origami in 
16   Origami out 
17   Origami -z 
18   Origami CE 
  
Strip order: 
n-Seite: rechts (Salev) nach links (Jura) 
p-Seite: oben nach unten 
  
APV chips with lower noise: 
                          -z                                   ce 
p-side             #5                                #10 (= pos 4) 
n-side             #13 (= pos1)             #19 (= pos 3)  |  
| Attachment 1: temperatures_run040.jpg
 |    |  
| 
  77  
 | 
Tue Oct 30 17:24:01 2012 | 
Markus Friedl | MicronOrigami_gross | cal | cal040 | 83800 | 30.10.2012  17:20:28  | 30.10.2012  17:54:09 | Unknown |  Cooling for 2DSSD established after some struggle. 
2DSSD fully read out with cooling 
HV= +40 V -40 V    I = 2 uA 
Beam position: none 
  
Positions of thermal sensors: 
11   Kapillare Anfang 
12   Kapillare Ende 
13   --- 
14   unmittelbar nach Kapillare 
15   Origami in 
16   Origami out 
17   Origami -z 
18   Origami CE 
  
Strip order: 
n-Seite: rechts (Salev) nach links (Jura) 
p-Seite: oben nach unten 
  
APV chips with lower noise: 
                          -z                                   ce 
p-side             #5                                #10 (= pos 4) 
n-side             #13 (= pos1)             #19 (= pos 3) 
 
  |  
| 
  76  
 | 
Tue Oct 30 11:05:32 2012 | 
Markus Friedl | HPK_baby | run | run039 | 150k | 30.10.2012  11:03:19 | 30.10.2012  14:57:57 | Unknown |  HPK baby stack after irradiation - no cooling 
I =  420A and growing (warming up) 
positioned centered on p and n 
  
 
  |  
| 
  75  
 | 
Tue Oct 30 10:37:19 2012 | 
Markus Friedl | HPK_baby | cal | cal039 | 83800 | 30.10.2012  10:35:35  | 30.10.2012  11:02:06  | Good |  Turned off cooling, now taking warm data 
  
HPK baby stack after irradiation - no cooling 
I =  200A and growing (warming up) 
positioned centered on p and n 
  
  
 
  |  
| 
  74  
 | 
Mon Oct 29 23:13:52 2012 | 
Markus Friedl | HPK_baby | run | run038 | 476500 | 29.10.2012  23:13:05 | 30.10.2012  10:22:54 | Unknown |  HPK baby stack after irradiation with partial cooling (HPK neutron & HPK neutron/gamma) 
HV = +75 V  -75V 
I =  176A 
positioned centered on p and n 
  
Temp sensors configuration: 
11   HPK Neutron n in 
12   HPK Neutron n -> p 
13   ---- 
14   HPK Neutron p -> Gamma p 
15   Gamma p -> n 
16   Neutron Gamma n out 
  
Perfect cooling curve :-) 
 
  |  
| 
  73  
 | 
Mon Oct 29 22:36:52 2012 | 
Markus Friedl | HPK_baby | cal | cal038 | 83800 | 29.10.2012  22:17:34 | 29.10.2012  22:47:47 | Good |  HPK baby stack after irradiation with partial cooling (HPK neutron & HPK neutron/gamma) 
HV = +75 Vm  -75V 
I =  226A 
  
  
Temp sensors configuration: 
11   HPK Neutron n in 
12   HPK Neutron n -> p 
13   ---- 
14   HPK Neutron p -> Gamma p 
15   Gamma p -> n 
16   Neutron Gamma n out  |  
| 
  72  
 | 
Mon Oct 29 12:24:41 2012 | 
Markus Friedl | Infineon | run | run037 | 301382 | 29.10.2012  12:22:22 | 29.10.2012  21:05:57 | Good |  Infineon stack Version 2 after irradiation 
HV = +300 V 
I = 162 A 
  
hitting upper part of strixels and baby, vertically ~centered  |  
| 
  71  
 | 
Mon Oct 29 11:36:40 2012 | 
Markus Friedl | Infineon | cal | cal037 | 83800 | 29.10.2012  11:35:12 | 29.10.2012  11:58:02  | Good |  Infineon stack Version 2 after irradiation 
HV = +300 V 
I = 137 A 
   |  
| 
  70  
 | 
Mon Oct 29 04:02:16 2012 | 
Manfred Valentan | MicronBaby | run | run036 | 296294 | 29.10.2012  03:53:33 | 29.10.2012  11:05:35 | Unknown |  Micron Baby stack 2 after irradiation (intermediate strips) 
HV = -100 V 
I = 36 uA 
  
DESY table shifted by 2.5mm (beam down) after beam profile was changed (to get higher intensity) 
beam hitting higher APVs 
  
Stopped when long beam off period was announced  |  
| 
  69  
 | 
Sun Oct 28 20:07:28 2012 | 
Markus Friedl | MicronBaby | run | run035 | 304110 | 28.10.2012  20:01:48 | 29.10.2012  03:50:44 | Good |  Micron Baby stack 2 after irradiation (intermediate strips) 
HV = -100 V 
I = 39 uA 
  
DESY table shifted by 2.5mm (beam down) after beam profile was changed (to get higher intensity) 
beam hitting lower APVs  |  
| 
  68  
 | 
Sun Oct 28 16:22:35 2012 | 
Christian Irmler | MicronBaby | run | run034 | 101864 | 28.10.2012  16:12:24  | 28.10.2012  18:34:24 | Good |  Micron Baby stack 2 after irradiation (intermediate strips) 
HV = -100 V 
I = 36.3 uA 
Position APV0 of all sensors 
X-Y Table coordinates: 
X=0 / Y=-1  (afterwards: nulled) 
PC power cut after ~100k events  |  
| 
  67  
 | 
Sun Oct 28 15:46:07 2012 | 
Markus Friedl | MicronBaby | cal | cal034 | 83800 | 28.10.2012  15:19:10 | 28.10.2012  15:40:47 | Good |  Micron Baby stack 2 after irradiation (intermediate strips) 
HV = -100 V 
I = 33 uA  |  
| 
  66  
 | 
Sun Oct 28 08:37:53 2012 | 
Christian Irmler | MicronOrigami_gross | run | run033 | 66937 | 28.10.2012  08:33:42 | 28.10.2012  14:10:43  | Unknown |  Belle stack 2 after gamma irradiation 
HV = +50V -50V 
I = 101 uA 
CO2 cooling 
hitting APV2 (n side) = center of wedge sensor 
  
Temperatur sensors: 
    - T11: Origami #4 in
 
    - T12: Origami #4 out
 
    - T13: Origami #3 in (still wrong values!)
 
    - T14: Origami #3 out
 
    - T15: Wedge new 1 out
 
    - T16: Wedge old out
 
    - T17: Wedge new 1 cooling block
 
    - T18: Wedge old cooling block
 
  |  
| Attachment 1: temp_run33.JPG
 |    |  
| Attachment 2: temp_run33_2.JPG
 |    |  
| 
  65  
 | 
Sun Oct 28 02:51:49 2012 | 
Markus Friedl | MicronOrigami_gross | run | run032 | 150k | 28.10.2012  02:47:24 | 28.10.2012  08:31:19  | Good |  Belle stack 2 after gamma irradiation 
HV = +50V -50V 
I = 101 uA 
Bias currents absolutely stable during the whole run. 
CO2 cooling 
hitting APV3 (n side) = wide side of wedge sensor  |  
| 
  64  
 | 
Sat Oct 27 21:49:08 2012 | 
Markus Friedl | MicronOrigami_gross | run | run031 | 150k | 27.10.2012  21:42:46 | 28.10.2012  02:35:55 (+1h due to winter time) | Good |  Belle stack 2 after gamma irrdiation 
HV = +50V -50 V 
I = 102 uA 
CO2 cooling 
   |  
| 
  63  
 | 
Sat Oct 27 19:36:24 2012 | 
Markus Friedl | MicronOrigami_gross | cal | cal031 | 83800 | 27.10.2012  19:59:50 | 27.10.2012  20:44:38 | Good |  Belle stack 2 after irradiation 
HV = +50V -50V 
I = 112 µA 
CO2 cooling  |  
| 
  62  
 | 
Sat Oct 27 07:51:49 2012 | 
Manfred Valentan | MicronBaby | run | run030 | 376678 | 27.10.2012  07:49:09 | 27.10.2012  17:32:07 | Good |  After irradiation 
xy-table: x=319.4, y=87.6 
beam hits APV1 
Micron baby stack after gamma irrdiation 
HV = -100 V 
I = -58 uA  |  
| 
  61  
 | 
Sat Oct 27 01:13:47 2012 | 
Christian Irmler | MicronBaby | run | run029 | 307k | 27.10.2012  01:02:49 | 27.10.2012  07:36:34 | Good |  After irradiation 
xy-table: x=319.4, y=74.6 
beam hits APV0 
Micron baby stack after gamma irrdiation 
HV = -100 V 
I = -58 uA  |  
| 
  60  
 | 
Sat Oct 27 00:43:55 2012 | 
Christian Irmler | MicronBaby | cal | cal029 | 83800 | 27.10.2012  00:10:15 | 27.10.2012  00:36:55 | Good |  After irradiation 
  
Micron baby stack after gamma irrdiation 
HV = -100 V 
I = -58 uA  |  
| 
  58  
 | 
Wed Oct 24 09:51:41 2012 | 
Thomas Bergauer | MicronOrigami_gross | cal | cal028 | 83800 | 24.10.2012  09:50:53 | 24.10.2012  10:39:43 | Unknown |   Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-2.5V, Ibias=14.5uA 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1  |  
| 
  57  
 | 
Wed Oct 24 08:25:04 2012 | 
Thomas Bergauer | MicronOrigami_gross | cal | cal027 | 83800 | 24.10.2012  08:22:25 | 24.10.2012  09:10:19 | Unknown |   Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-5V, Ibias=23.5uA 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1  |  
| 
  56  
 | 
Tue Oct 23 23:12:03 2012 | 
Thomas Bergauer | MicronOrigami_gross | run | run027 | 220847 | 23.10.2012  23:10:14 | 24.10.2012  08:19:51 | Unknown |   Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-5V, Ibias=23.5uA 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1 
  
SPS Status during whole run: Still problems with North Area steering. means that beam position was not stable.  |  
| 
  55  
 | 
Tue Oct 23 16:06:09 2012 | 
Markus Friedl | MicronOrigami_gross | run | run026 | 102124 | 23.10.2012  16:04:47 | 23.10.2012  23:04:56 | Unknown |  Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-10V, Ibias=36uA 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1 
 
    
        
            | SPS Status during whole run: Still problems with North Area steering. means that beam position was not stable. | 
         
    
 
 |  
| 
  54  
 | 
Tue Oct 23 15:55:58 2012 | 
Markus Friedl | MicronOrigami_gross | cal | cal026 | 83800 | 23.10.2012  14:56:47 | 23.10.2012  15:42:17  | Good |  Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-10V, Ibias=36uA 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1  |  
| 
  53  
 | 
Tue Oct 23 13:50:44 2012 | 
Markus Friedl | MicronOrigami_gross | cal | cal025 | 83800 | 23.10.2012  13:47:09  | 23.10.2012  14:35:05 | Good |  Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-15V, Ibias=48uA 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1  |  
| 
  52  
 | 
Tue Oct 23 08:22:42 2012 | 
Markus Friedl | MicronOrigami_gross | run | run025 | 100000 | 23.10.2012  08:21:37 | 23.10.2012  13:47:09 | Good |  Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-15V, Ibias=47uA 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1  |  
| 
  51  
 | 
Mon Oct 22 19:19:53 2012 | 
Markus Friedl | MicronOrigami_gross | run | run024 | 260000 | 22.10.2012  19:18:16 | 23.10.2012  08:17:20  | Good |  Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-20V, Ibias=57uA 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1 
  
Beam shape on n side (horizontally) different than in previous runs. Number of triggers per spill is reduced to ~60k (was 200..250k before). Reason unknown.  |  
| 
  50  
 | 
Mon Oct 22 10:10:16 2012 | 
Markus Friedl | MicronOrigami_gross | cal | cal024 | 83800 | 22.10.2012  10:08:53 | 22.10.2012  10:54:18 | Good |  Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-20V, Ibias=53uA 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1  |  
| 
  49  
 | 
Mon Oct 22 00:57:05 2012 | 
Markus Friedl | MicronOrigami_gross | run | run023 | 176629 | 22.10.2012  00:55:59 | 22.10.2012  10:04:38 | Good |  Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-25V, Ibias=65uA 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1 
No more events since 22.10.2012  07:09:53  event=176629 - spill signals removed? 
   |  
| 
  48  
 | 
Mon Oct 22 00:08:39 2012 | 
Markus Friedl | MicronOrigami_gross | cal | cal023 | 83800 | 22.10.2012  00:07:34 | 22.10.2012  00:53:02 | Good |  Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-25V, Ibias=65uA 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1  |  
| 
  47  
 | 
Sun Oct 21 16:04:06 2012 | 
Markus Friedl | MicronOrigami_gross | run | run022 | 151282 | 21.10.2012  18:16:53 | 22.10.2012  00:04:42 | Good |  Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-30V, Ibias=70uA 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1  |  
| 
  46  
 | 
Sun Oct 21 15:15:45 2012 | 
Markus Friedl | MicronOrigami_gross | cal | cal022 | 83800 | 21.10.2012  15:13:47 | 21.10.2012  16:00:25 | Good |  Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-30V, Ibias=70uA 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1  |  
| 
  45  
 | 
Sun Oct 21 10:39:15 2012 | 
Markus Friedl | MicronOrigami_gross | run | run021 | 100000 | 21.10.2012  10:37:26 | 21.10.2012  15:04:49 | Good |  Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-35V, Ibias=69uA 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1 
   |  
| 
  44  
 | 
Sun Oct 21 09:50:00 2012 | 
Markus Friedl | MicronOrigami_gross | cal | cal021 | 83800 | 21.10.2012  09:50:07  | 21.10.2012  10:35:40 | Good |  Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-35V, Ibias=69uA 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1  |  
| 
  43  
 | 
Sun Oct 21 09:01:04 2012 | 
Markus Friedl | MicronOrigami_gross | cal | cal020 | 83800 | 21.10.2012  08:59:21 | 21.10.2012  09:45:03 | Good |  Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-40V, Ibias=72uA 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1  |  
| 
  42  
 | 
Sat Oct 20 19:35:30 2012 | 
Markus Friedl | MicronOrigami_gross | run | run020 | 300000 | 20.10.2012  19:34:19 | 21.10.2012  08:55:28 | Good |  Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-40V, Ibias=73A 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1 
   |  
| 
  41  
 | 
Sat Oct 20 11:40:13 2012 | 
Markus Friedl | MicronOrigami_gross | run | run019 | 100000 | 20.10.2012  11:38:19 | 20.10.2012  19:20:51 | Good |  Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-45V, Ibias=72A 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1 
Several periods without beam during this run.  |  
| 
  40  
 | 
Sat Oct 20 10:49:03 2012 | 
Markus Friedl | MicronOrigami_gross | cal | cal019 | 83800 | 20.10.2012  10:46:36 | 20.10.2012  11:32:57 | Good |  Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-45V, Ibias=70A 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1 
  
no beam at beginning (LINAC problem)  |  
| 
  39  
 | 
Fri Oct 19 19:25:29 2012 | 
Markus Friedl | MicronOrigami_gross | run | run018 | 318756 | 19.10.2012  19:23:55 | 20.10.2012  10:27:11 | Good |  Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-50V, Ibias=77A 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1 
  
beam went off (LINAC problem) around  
20.10.2012  07:00:39  event=315937 
So better ignore the last 3000 events during analysis.  |  
| 
  38  
 | 
Fri Oct 19 00:56:16 2012 | 
Markus Friedl | MicronOrigami_gross | run | run017 | 197899 | 19.10.2012  00:54:21 | 19.10.2012  14:10:02  | Good |  Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-50V, Ibias=76A 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1 
Same as run016, but timing shifted by 1 CLK to better center the peak of the shaped wafeforms for subsequent fitting during analysis. 
  
Beam was turned off around here:  
19.10.2012  08:56:12  event=193394 
So better ignore the last ~5000 events for analysis. 
   |  
| 
  37  
 | 
Fri Oct 19 00:45:52 2012 | 
Markus Friedl | MicronOrigami_gross | run | run016 | 11855 | 19.10.2012  00:24:05 | 19.10.2012  00:48:24 | Crap |    
Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-50V, Ibias=77A 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1 
  
Stack is now positioned on globally best performing position which should also enable reasonable tracking. 
Trigger timing not perfect, needs adjustment (-1 CLK) -> new run  |  
| 
  35  
 | 
Wed Oct 17 21:30:39 2012 | 
Markus Friedl | MicronOrigami_gross | cal | cal008 | 83800 | 17.10.2012  17:15:13 | 17.10.2012  18:08:11 | Good |  Internal calibration for "stealth parasitic" mode Belle stack; taken without beam 
  
Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-50V, Ibias=80A 
Position: approx. centered 
no beam 
  
  
Total bias current history: 
  
At the beginning, the system was already running for a few hours and the APV25 chips were initialized before, so thermal equilibrium was reached. 
The actual calibration run happened during the first ~250 measurement points (~1 hour). It seems like the APVs draw a bit more current during internal calibration. The overall decay is supposedly due to a temperature decrease towards night. 
  
Now tried the same thing with a short software run - same effect: 
  
Need to investigate supply currents while data taking - they should actually go up a bit - and their dependency on the trigger rate. 
   |  
| 
  33  
 | 
Wed Oct 17 05:16:22 2012 | 
Christian Irmler | MicronOrigami_gross | run | run015 | 54005 | 17.10.2012  05:10:06 | 17.10.2012  07:27:20 | Unknown |  Origami Stack 2: Origami #4, #3, Wedge new1, old 
HV = +-50V 
Ibias=4.43µA 
  
beam position: 
vertical: between APV 1&2 (of 6) 
horizontal: centered on APV#2 -> center of measureable area 
Position of xy table: 
x = 53, y = -31 
Temperatur sensors: 
    - T11: Origami #4 in
 
    - T12: Origami #4 out
 
    - T13: Origami #3 in (wrong values!)
 
    - T14: Origami #3 out
 
    - T15: Wedge new 1 out
 
    - T16: Wedge old out
 
    - T17: Wedge new 1 cooling block
 
    - T18: Wedge old cooling block
 
 
CO2 was empty @ 6 am.  |  
| Attachment 1: run015_temperatures.JPG
 |    |  
| 
  31  
 | 
Tue Oct 16 23:35:28 2012 | 
Christian Irmler | MicronOrigami_gross | run | run014 | 150k | 16.10.2012  23:32:24 | 17.10.2012  04:59:02  | Unknown |  Same as run011, but now with +- 50V bias voltage. 
Origami Stack 2: Origami #4, #3, Wedge new1, old 
HV = +-10V 
Ibias=4.83µA 
  
beam position: 
vertical: between APV 1&2 (of 6) 
horizontal: centered on APV#1 ->  right side of sensor -> small side of wedge sensors 
Position of xy table: 
x = 23, y = -31 
Temperatur sensors: 
    - T11: Origami #4 in
 
    - T12: Origami #4 out
 
    - T13: Origami #3 in (wrong values!)
 
    - T14: Origami #3 out
 
    - T15: Wedge new 1 out
 
    - T16: Wedge old out
 
    - T17: Wedge new 1 cooling block
 
    - T18: Wedge old cooling block
 
 
   |  
| Attachment 1: run014_temperatures.jpg
 |    |  
| 
  29  
 | 
Tue Oct 16 22:19:21 2012 | 
Christian Irmler | MicronOrigami_gross | cal | cal007 | 83800 | 16.10.2012  20:25:17  | 16.10.2012  21:12:01  | Unknown |  Origami Stack 2: Origami #4, #3, Wedge new1, old 
HV = +-50V, Ibias=12.3µA 
Position: verticallbtween APV 1&2 of 6,  left side of sensor,  
wide side of wedge sensors 
calibration for run013 
Temperatures @ 21:00: 
T11: -32 degC 
T12: -33 degC 
T13: -16 degC (obviously wrong value) 
T14: -35 degC 
T15: -18 degC 
T16: -17 degC 
T17: -15 degC 
T18: -15 degC  |  
| 
  28  
 | 
Tue Oct 16 13:59:46 2012 | 
Christian Irmler | MicronOrigami_gross | run | run013 | 150k | 16.10.2012  13:43:05 | 16.10.2012  20:21:04 | Unknown |  Origami Stack 2: Origami #4, #3, Wedge new1, old 
HV = +-50V 
Ibias=5.2µA 
  
beam position: 
vertical: between APV 1&2 (of 6) 
horizontal: centered on APV#3 ->  left side of sensor -> wide side of wedge sensors 
Position of xy table: 
x = 83, y = -31 
  
Temperatur sensors: 
    - T11: Origami #4 in
 
    - T12: Origami #4 out
 
    - T13: Origami #3 in (wrong values!)
 
    - T14: Origami #3 out
 
    - T15: Wedge new 1 out
 
    - T16: Wedge old out
 
    - T17: Wedge new 1 cooling block
 
    - T18: Wedge old cooling block
 
 
  
   |  
| Attachment 1: belle_2_temperatures.jpg
 |    |  
| 
  27  
 | 
Tue Oct 16 11:23:43 2012 | 
Christian Irmler | MicronOrigami_gross | run | run012 | 20k | 16.10.2012  11:16:01 | 16.10.2012  12:27:03  | Unknown |  Origami Stack 2a: Origami #4, Wedge new1 
reading out all 6 APV of p-side 
HV = +-40V, Ibias=10.4µA 
  
Origami 3 and Wedge old are still installed in the box, but not read out --> disconnected 
beam: 
p-side: centered between APV 4&5 
n-side: centered between APV 2&3 
--> upper left corner of Origami and wedge module --> we hit the APV chips and / or the PA0 of the Origami module 
no cooling 
Temperatur sensors: 
    - T11: Origami #4 in
 
    - T12: Origami #4 out
 
    - T13: Origami #3 in (wrong values!)
 
    - T14: Origami #3 out
 
    - T15: Wedge new 1 out
 
    - T16: Wedge old out
 
    - T17: Wedge new 1 cooling block
 
    - T18: Wedge old cooling block
 
  |  
| Attachment 1: belle_2a_temperatures.jpg
 |    |  
| 
  26  
 | 
Tue Oct 16 11:07:17 2012 | 
Christian Irmler | MicronOrigami_gross | cal | cal006 | 83800 | 16.10.2012  10:30:34 | 16.10.2012  11:00:51 | Unknown |  Origami Stack 2a: Origami #4, Wedge new1 
reading out all 6 APV of p-side 
HV = +-40V, Ibias=5.12µA 
  
no beam  
no cooling  |  
| 
  25  
 | 
Tue Oct 16 05:24:21 2012 | 
Christian Irmler | MicronOrigami_gross | run ATTENTION: wrong bias voltage | run011 | 150k | 16.10.2012  05:19:28  | 16.10.2012  09:59:24 | Crap |  ATTENTION: Bias voltage was +-100 V instead of +- 50 V 
Origami Stack 2: Origami #4, #3, Wedge new1, old 
HV = +-100V 
Ibias=12.3µA 
  
beam position: 
vertical: between APV 1&2 (of 6) 
horizontal: centered on APV#3 ->  left side of sensor -> wide side of wedge sensors 
Position of xy table: 
x = 83, y = -25 
 
Temperatures: 
Origami #4: In=-33 degC / Out=-34 degC 
Origami #3: Out=-35 degC (temperatur sensor of inlet is not working) 
Wedge new 1: Out =  -17 degC, cooling block = -16 degC 
Wedge old: Out = -15 degC, cooling block = -15 degC 
  
Stopped after 132658 events, because of empty gas bottle and thus insufficient cooling.  |  
| 
  32  
 | 
Wed Oct 17 01:21:50 2012 | 
Marko Dragicevic | Infineon | run | run009 | 150k | 15.10.2012 08:20:15 | 15.10.2012 11:01:11 | Unknown |   This run was not recorded in original sequence in the ELOG!!! 
  
    
        
            | 
              Infineon Stack Version 2 (no height information, BabyStrips vertical Strixel vertical) 
            HV = 300V   I=4uA 
            beam on 
              
            Final DESY position (center of vertical beam profile) 
            Module position: 15 / 3 -- hitting lower part of baby and bottom strixels 
            
                
                    
                        | 07_baby | 
                        0,0 | 
                        APV1 lower, APV2 upper | 
                     
                    
                        | Strixel 2 | 
                        20,8 | 
                        Hybrid1/APV1 top-left, Hybrid1/APV2 top right, Hybrid2/APV1 bottom left, Hybrid2/APV2 bottom right  | 
                     
                    
                        | Strixel 1 | 
                        39,4 | 
                        Hybrid1/APV1 top-left, Hybrid1/APV2 top right, Hybrid2/APV1 bottom left, Hybrid2/APV2 bottom right  | 
                     
                    
                        | 12_baby | 
                        60,6 | 
                        APV1 lower, APV2 upper | 
                     
                
             
              
              
             | 
         
    
  |  
| 
  19  
 | 
Mon Oct 15 00:08:26 2012 | 
Marko Dragicevic | Infineon | run | run008 | 339075 | 15.10.2012 01:49:33 | 15.10.2012 08:04:24 | Unknown |   Infineon Stack Version 2 (no height information, BabyStrips vertical Strixel vertical) 
HV = 300V   I=4uA 
beam on 
  
Final DESY position (center of vertical beam profile) 
Module position: 0 / 3 -- hitting upper part of baby and top strixels 
    
        
            | 07_baby | 
            0,0 | 
            APV1 lower, APV2 upper | 
         
        
            | Strixel 2 | 
            20,8 | 
            Hybrid1/APV1 top-left, Hybrid1/APV2 top right, Hybrid2/APV1 bottom left, Hybrid2/APV2 bottom right  | 
         
        
            | Strixel 1 | 
            39,4 | 
            Hybrid1/APV1 top-left, Hybrid1/APV2 top right, Hybrid2/APV1 bottom left, Hybrid2/APV2 bottom right  | 
         
        
            | 12_baby | 
            60,6 | 
            APV1 lower, APV2 upper | 
         
    
 
   |  
| 
  24  
 | 
Mon Oct 15 23:26:52 2012 | 
Marko Dragicevic | MicronOrigami_gross | run ATTENTION: wrong bias voltage | run010 | 158k | 15.10.2012  23:10:40  | 16.10.2012  05:05:35 | Crap |  ATTENTION: Bias voltage was +-100 V instead of +- 50 V 
Same as run009. 
Origami Stack 2: Origami #4, #3, Wedge new1, old 
HV = +-10V 
Ibias=12.3µA 
  
beam position: 
vertical: between APV 1&2 (of 6) 
horizontal: centered on APV#1 ->  right side of sensor -> small side of wedge sensors 
Position of xy table: 
x = 23, y = -25 
 
Temperatures: 
Origami #4: In=-33 degC / Out=-34 degC 
Origami #3: Out=-35 degC (temperatur sensor of inlet is not working) 
Wedge new 1: Out =  -17 degC, cooling block = -14 degC 
Wedge old: Out = -16 degC, cooling block = -14 degC 
  
15.10.2012  22:08:31  event=0  rate=0events/s temp/curr=31.3/089.2 31.3/-16.2 31.2/-17.9 31.3/-18.2 29.9/003.6 29.9/003.1 30.0/-01.1 29.9/-01.6  
  |  
| 
  23  
 | 
Mon Oct 15 22:13:28 2012 | 
Marko Dragicevic | MicronOrigami_gross | cal ATTENTION: wrong bias voltage  | cal005 | 83800 | 15.10.2012  22:16:26 | 15.10.2012  23:07:37  | Unknown |  ATTENTION: Bias voltage was +-100 V instead of +- 50 V 
Origami Stack 2: Origami #4, #3, Wedge new1, old 
HV = +-100V 
Ibias=12.3µA 
  
beam position: 
vertical: between APV 1&2 (of 6) 
horizontal: centered on APV#1 ->  right side of sensor 
Position of xy table: 
x = 23, y = -25 
 
Temperatures: 
Origami #4: In=-33 degC / Out=-34 degC 
Origami #3: Out=-35 degC (temperatur sensor of inlet is not working) 
Wedge new 1: Out =  -17 degC, cooling block = -14 degC 
Wedge old: Out = -16 degC, cooling block = -14 degC 
   |  
| 
  22  
 | 
Mon Oct 15 19:40:03 2012 | 
Marko Dragicevic | MicronOrigami_gross | run ATTENTION: wrong bias voltage | run009 | 31650 | 15.10.2012  19:28:30  | 15.10.2012  22:08:31  | Crap |  ATTENTION! Bias voltage was +-100 V instead of +-50 V  
Origami Stack 2: Origami #4, #3, Wedge new1, old 
HV = +-100V 
Ibias=12.3µA 
  
beam position: 
vertical: between APV 1&2 (of 6) 
horizontal: centered on APV#1 ->  right side of sensor 
Position of xy table: 
x = 23, y = -25 
 
Temperatures: 
Origami #4: In=-33 degC / Out=-34 degC 
Origami #3: Out=-35 degC (temperatur sensor of inlet is not working) 
Wedge new 1: Out =  -17 degC, cooling block = -14 degC 
Wedge old: Out = -16 degC, cooling block = -14 degC 
  
15.10.2012  22:08:31  event=0  rate=0events/s temp/curr=31.3/089.2 31.3/-16.2 31.2/-17.9 31.3/-18.2 29.9/003.6 29.9/003.1 30.0/-01.1 29.9/-01.6  
  
Stopped after 31650 events, because of PS problems and no beam.  |  
| 
  18  
 | 
Sun Oct 14 23:01:11 2012 | 
Marko Dragicevic | Infineon | cal | cal004 | 83800 | 14.10.2012 21:44:00 | 14.10.2012 21:03:00 | Unknown |  Infineon Stack Version 1 (with height information, BabyStrips horizontal Strixel vertical) 
HV = 300V   I=3.1 uA  |  
| 
  17  
 | 
Sun Oct 14 20:12:14 2012 | 
Marko Dragicevic | Infineon | run | run007 | 110k | 14.10.2012 20:07:12 | 14.10.2012 21:04:12 | Unknown |  Infineon Stack Version 1 (with height information, BabyStrips horizontal Strixel vertical) 
HV = 300V   I=3uA 
beam on 
  
Final DESY position (center of vertical beam profile) 
Module position: 0 / 0 -- hitting the center of babies, between strixels 
    
        
            | 07_baby | 
            0,0 | 
            APV1 lower, APV2 upper | 
         
        
            | Strixel 2 | 
            20,8 | 
            Hybrid1/APV1 top-left, Hybrid1/APV2 top right, Hybrid2/APV1 bottom left, Hybrid2/APV2 bottom right  | 
         
        
            | Strixel 1 | 
            39,4 | 
            Hybrid1/APV1 top-left, Hybrid1/APV2 top right, Hybrid2/APV1 bottom left, Hybrid2/APV2 bottom right  | 
         
        
            | 12_baby | 
            60,6 | 
            APV1 lower, APV2 upper | 
         
    
 
  
   |  
| 
  16  
 | 
Sun Oct 14 09:08:42 2012 | 
Manfred Valentan | MicronBaby | run | run006 | 300k | 14.10.2012  09:01:15 |   | Unknown |  Micron baby intermediate stack 
HV = -100V   I=6.9uA 
beam on 
  
Final DESY position (center of vertical beam profile) 
Module position: 0 / -31.0 -- hitting the lower half of the sensor (centered on even APVs)  |  
| 
  15  
 | 
Sun Oct 14 08:25:10 2012 | 
Manfred Valentan | MicronBaby | cal | cal003 | 83800 | 14.10.2012  08:21:46 | 14.10.2012  08:51:58 | Unknown |  Micron baby intermediate stack 
HV = -100 V 
I = 6.9 uA  |  
| 
  14  
 | 
Sun Oct 14 02:02:39 2012 | 
Manfred Valentan | MicronBaby | run | run005 | 300k | 14.10.2012  02:00:08 | 14.10.2012  08:17:02 | Unknown |  Micron baby intermediate stack 
HV = -100V   I=6.3uA 
beam on 
  
Final DESY position (center of vertical beam profile) 
Module position: 0 / -12.0 -- hitting the upper half of the sensor (centered on odd APVs)  |  
| 
  12  
 | 
Sat Oct 13 23:04:22 2012 | 
Markus Friedl | MicronOrigami_gross | cal | cal002 | 83800 | 13.10.2012  23:03:18 | 13.10.2012  22:57:48 | Unknown |  Belle stack 3 (2-DSSD, Micron new, Micron old) 
HV = +-50V   I=10.5A  
beam on CE sensor 
CO2 gas cooling:  
Temp. @ Origami ~ -18°C (inlet) / -8°C (outlet) 
Temp. @ Wedge new1: ~ 0°C 
Temp. @ Wedge old: ~ -5°C  |  
| 
  11  
 | 
Sat Oct 13 23:01:54 2012 | 
Markus Friedl | MicronOrigami_gross | run with Belle stack 3 | run004 | 30k | 13.10.2012  21:41:34 | 13.10.2012  22:57:48 | Unknown |  Belle stack 3, other position (CE) 
  
Position of xy table: 
x=-37, y=-9 
  
13.10.2012  21:41:34  event=0  Disk space: Needed=3.30 GB, Available=206.59 GB, Total=931.51 GB 
13.10.2012  21:41:34  event=0  DAQ start (mode: Hardware (Normal Run)) 
13.10.2012  21:41:34  event=0  Init NECO... done 
13.10.2012  21:41:35  event=0  Init APVs... done 
13.10.2012  21:41:40  event=0  Send 10 dummy triggers to initialize APV pedestals... done 
13.10.2012  21:41:40  event=0  Init FADCs... done 
13.10.2012  21:41:40  event=0  Taking 600 pedestal events 
13.10.2012  21:41:53  event=599  Pedestal and Noise evaluation done - switching to Hardware (Normal Run) 
13.10.2012  21:42:39  event=630  rate=0events/s temp/curr=32.2/090.4 32.2/-15.7 32.2/-16.8 32.2/-17.0 30.9/003.9 30.9/003.8 30.9/-00.9 30.9/-01.3  
13.10.2012  21:43:39  event=1036  rate=0events/s temp/curr=32.0/090.6 32.2/-15.9 32.2/-17.0 32.2/-17.0 30.9/003.9 30.9/003.8 31.0/-00.9 30.9/-01.4  
13.10.2012  21:44:39  event=1848  rate=0events/s temp/curr=32.2/090.4 32.2/-15.9 32.2/-16.8 32.2/-17.0 30.9/003.8 30.9/003.9 30.9/-00.9 30.9/-01.4  
13.10.2012  21:45:39  event=2252  rate=0events/s temp/curr=32.2/090.6 32.2/-15.9 32.2/-16.8 32.2/-17.0 30.9/003.9 30.9/003.9 30.9/-00.9 30.9/-01.4  
13.10.2012  21:46:40  event=2651  rate=0events/s temp/curr=32.2/090.6 32.2/-15.9 32.2/-16.8 32.2/-17.0 30.9/003.9 30.9/003.9 30.9/-00.9 30.9/-01.4  
13.10.2012  21:47:39  event=3202  rate=42events/s temp/curr=32.0/090.6 32.2/-15.9 32.2/-17.0 32.0/-17.0 30.7/003.9 30.9/003.9 30.9/-00.9 30.9/-01.4  
13.10.2012  21:48:39  event=3794  rate=0events/s temp/curr=32.2/090.6 32.0/-15.9 32.0/-16.8 32.0/-17.0 30.9/003.9 30.7/003.8 30.9/-00.9 30.9/-01.3  
13.10.2012  21:49:40  event=4165  rate=0events/s temp/curr=32.2/090.6 32.2/-15.9 32.2/-16.8 32.2/-16.8 30.9/003.8 30.7/003.9 30.9/-00.9 30.9/-01.4  
13.10.2012  21:50:39  event=4569  rate=0events/s temp/curr=32.0/090.6 32.0/-15.9 32.0/-17.0 32.0/-17.1 30.7/003.8 30.7/003.9 30.7/-00.9 30.9/-01.3  
13.10.2012  21:51:39  event=4609  rate=0events/s temp/curr=32.0/090.6 32.2/-15.9 32.0/-16.8 32.0/-17.0 30.7/003.9 30.7/003.9 30.7/-00.9 30.9/-01.4  
13.10.2012  21:52:39  event=4625  rate=0events/s temp/curr=32.2/090.4 32.0/-15.7 32.0/-16.8 32.0/-17.0 30.7/003.9 30.7/003.9 30.9/-00.9 30.9/-01.4  
13.10.2012  21:53:40  event=4646  rate=0events/s temp/curr=32.0/090.6 32.0/-15.9 32.0/-16.8 32.0/-17.0 30.7/003.8 30.7/003.8 30.7/-00.9 30.7/-01.4  
13.10.2012  21:54:39  event=5183  rate=42events/s temp/curr=32.0/090.6 31.9/-15.9 32.0/-17.0 32.0/-17.0 30.7/003.8 30.7/003.9 30.7/-00.9 30.7/-01.4  
13.10.2012  21:55:39  event=5814  rate=0events/s temp/curr=32.0/090.6 32.0/-15.9 32.0/-16.8 32.0/-17.0 30.7/003.9 30.7/003.9 30.7/-00.9 30.7/-01.4  
13.10.2012  21:56:38  event=6222  rate=0events/s temp/curr=32.0/090.6 32.0/-15.9 32.0/-17.0 32.0/-17.0 30.7/003.9 30.7/003.9 30.7/-00.9 30.7/-01.4  
13.10.2012  21:57:40  event=6633  rate=0events/s temp/curr=32.0/090.6 32.0/-15.9 32.0/-17.0 32.0/-16.8 30.7/003.9 30.7/003.9 30.7/-00.9 30.7/-01.4  
13.10.2012  21:58:38  event=7259  rate=39events/s temp/curr=32.0/090.6 32.0/-15.9 32.0/-17.0 32.0/-17.0 30.7/003.8 30.7/003.9 30.7/-00.9 30.7/-01.4  
13.10.2012  21:59:39  event=7667  rate=0events/s temp/curr=32.0/090.6 32.0/-15.7 32.0/-17.0 32.0/-17.0 30.7/003.9 30.7/003.9 30.7/-00.9 30.7/-01.4  
13.10.2012  22:00:38  event=7712  rate=0events/s temp/curr=32.0/090.6 32.0/-15.9 32.0/-17.0 31.9/-16.8 30.7/003.9 30.6/003.9 30.7/-00.9 30.7/-01.4  
13.10.2012  22:01:38  event=8161  rate=42events/s temp/curr=32.0/090.4 32.0/-15.9 32.0/-17.0 32.0/-17.0 30.7/003.9 30.7/003.9 30.7/-00.9 30.7/-01.4  
13.10.2012  22:02:38  event=8656  rate=0events/s temp/curr=32.0/090.6 32.0/-15.9 32.0/-17.0 32.0/-17.0 30.6/003.9 30.6/003.9 30.7/-00.9 30.7/-01.4  
13.10.2012  22:03:38  event=9060  rate=0events/s temp/curr=32.0/090.6 32.0/-15.9 31.9/-17.0 31.9/-17.0 30.6/003.9 30.7/003.9 30.7/-00.9 30.7/-01.4  
13.10.2012  22:04:38  event=9463  rate=0events/s temp/curr=32.0/090.6 32.0/-15.9 32.0/-17.0 32.0/-17.0 30.7/003.9 30.6/003.9 30.7/-00.9 30.6/-01.4  
13.10.2012  22:05:38  event=9942  rate=2events/s temp/curr=32.0/090.4 31.9/-15.9 32.0/-17.0 32.0/-17.0 30.7/003.9 30.6/003.9 30.6/-00.9 30.6/-01.4  
13.10.2012  22:06:39  event=10353  rate=0events/s temp/curr=32.0/090.4 31.9/-15.9 31.9/-17.0 32.0/-17.0 30.6/003.9 30.6/003.9 30.6/-00.8 30.7/-01.4  
13.10.2012  22:07:38  event=10381  rate=0events/s temp/curr=32.0/090.6 32.0/-15.9 32.0/-17.0 32.0/-17.0 30.6/003.9 30.6/003.9 30.7/-00.9 30.6/-01.4  
13.10.2012  22:08:38  event=10843  rate=41events/s temp/curr=31.9/090.4 31.9/-15.9 32.0/-16.8 32.0/-16.8 30.6/003.9 30.6/003.9 30.6/-00.9 30.6/-01.4  
13.10.2012  22:09:38  event=11272  rate=0events/s temp/curr=31.9/090.6 31.9/-15.9 32.0/-17.0 32.0/-17.0 30.6/003.9 30.6/003.9 30.6/-00.9 30.7/-01.4  
13.10.2012  22:10:38  event=11467  rate=0events/s temp/curr=31.9/090.6 32.0/-15.9 32.0/-16.8 32.0/-16.8 30.7/003.9 30.6/003.9 30.6/-00.9 30.6/-01.4  
13.10.2012  22:11:38  event=11778  rate=0events/s temp/curr=31.9/090.6 32.0/-15.9 32.0/-16.8 32.0/-16.8 30.6/003.9 30.6/003.9 30.6/-00.9 30.6/-01.4  
13.10.2012  22:12:38  event=12495  rate=43events/s temp/curr=31.9/090.6 32.0/-15.9 32.0/-16.8 32.0/-17.0 30.6/003.9 30.7/003.9 30.6/-00.9 30.6/-01.4  
13.10.2012  22:13:39  event=12658  rate=0events/s temp/curr=32.0/090.4 32.0/-15.9 32.0/-16.8 32.0/-16.8 30.6/003.9 30.6/003.8 30.6/-00.9 30.6/-01.4  
13.10.2012  22:14:38  event=13063  rate=0events/s temp/curr=32.0/090.6 32.0/-15.9 32.0/-16.8 32.0/-17.0 30.6/003.9 30.6/003.9 30.6/-00.9 30.6/-01.4  
13.10.2012  22:15:38  event=13422  rate=5events/s temp/curr=32.0/090.6 32.0/-15.9 32.0/-17.0 32.0/-17.0 30.7/003.9 30.7/003.8 30.7/-00.9 30.7/-01.4  
13.10.2012  22:16:38  event=14130  rate=0events/s temp/curr=31.9/090.4 31.9/-15.9 31.9/-16.8 32.0/-17.0 30.7/003.9 30.6/003.9 30.6/-00.9 30.6/-01.4  
13.10.2012  22:17:38  event=14146  rate=0events/s temp/curr=31.9/090.6 32.0/-15.9 32.0/-17.0 32.0/-16.8 30.7/003.9 30.7/003.9 30.6/-00.9 30.6/-01.4  
13.10.2012  22:18:38  event=14551  rate=0events/s temp/curr=31.9/090.6 32.0/-15.9 32.0/-16.8 32.0/-17.0 30.6/003.9 30.7/003.8 30.6/-00.9 30.7/-01.4  
13.10.2012  22:19:38  event=15209  rate=42events/s temp/curr=31.9/090.6 31.9/-15.9 32.0/-17.0 31.9/-17.0 30.7/003.9 30.7/003.8 30.7/-00.9 30.7/-01.4  
13.10.2012  22:20:38  event=15568  rate=0events/s temp/curr=32.0/090.6 31.9/-15.9 32.0/-16.8 32.0/-17.0 30.7/003.9 30.6/003.9 30.6/-00.9 30.7/-01.4  
13.10.2012  22:21:38  event=15971  rate=0events/s temp/curr=31.9/090.6 31.9/-15.9 31.9/-17.0 31.9/-17.0 30.6/003.9 30.6/003.9 30.6/-00.9 30.6/-01.4  
13.10.2012  22:22:38  event=16378  rate=0events/s temp/curr=31.9/090.6 32.0/-15.9 32.0/-17.0 32.0/-16.8 30.6/003.9 30.6/003.9 30.6/-00.9 30.6/-01.4  
13.10.2012  22:23:29  event=16952  Spawning new data file: D:\cern12\belle_stack3\data\run004.dat.001 
13.10.2012  22:23:38  event=17188  rate=0events/s temp/curr=31.9/090.6 32.0/-15.9 31.9/-16.8 31.9/-17.0 30.6/003.9 30.6/003.9 30.6/-00.9 30.6/-01.4  
13.10.2012  22:24:38  event=17596  rate=0events/s temp/curr=31.9/090.6 31.9/-15.9 31.9/-16.8 31.9/-17.0 30.6/003.9 30.6/003.9 30.6/-00.9 30.6/-01.4  
13.10.2012  22:25:38  event=18006  rate=0events/s temp/curr=31.9/090.6 31.9/-15.9 31.9/-16.8 31.9/-16.8 30.6/003.9 30.6/003.8 30.6/-00.9 30.6/-01.4  
13.10.2012  22:26:37  event=18621  rate=43events/s temp/curr=31.9/090.4 31.9/-15.9 32.0/-17.0 31.9/-17.0 30.6/003.9 30.6/003.9 30.6/-00.9 30.6/-01.4  
13.10.2012  22:27:37  event=19214  rate=0events/s temp/curr=32.0/090.6 31.9/-15.9 31.9/-17.0 31.9/-16.8 30.6/003.9 30.6/003.9 30.6/-00.9 30.6/-01.4  
13.10.2012  22:28:37  event=19622  rate=0events/s temp/curr=31.9/090.6 31.9/-15.9 32.0/-17.0 31.9/-17.0 30.5/003.9 30.6/003.9 30.6/-00.9 30.6/-01.4  
13.10.2012  22:29:37  event=20021  rate=0events/s temp/curr=31.9/090.6 31.9/-15.9 31.9/-17.0 31.9/-17.0 30.6/003.9 30.6/003.9 30.5/-00.9 30.5/-01.4  
13.10.2012  22:30:38  event=20831  rate=0events/s temp/curr=31.9/090.6 31.9/-15.9 31.9/-16.8 31.9/-17.0 30.6/003.9 30.5/003.9 30.6/-00.9 30.5/-01.3  
13.10.2012  22:31:37  event=20976  rate=0events/s temp/curr=31.9/090.6 31.9/-15.9 31.9/-16.8 31.9/-17.0 30.5/003.9 30.6/003.9 30.6/-00.9 30.5/-01.4  
13.10.2012  22:32:37  event=21378  rate=0events/s temp/curr=31.9/090.6 31.9/-15.9 31.8/-17.0 31.9/-17.0 30.5/003.9 30.5/003.9 30.5/-00.9 30.5/-01.4  
13.10.2012  22:33:37  event=21945  rate=43events/s temp/curr=31.8/090.6 31.8/-15.9 31.9/-17.0 31.9/-17.0 30.6/003.9 30.5/003.9 30.6/-00.9 30.6/-01.3  
13.10.2012  22:34:39  event=22587  rate=0events/s temp/curr=31.9/090.6 31.8/-15.9 31.8/-17.0 31.8/-17.0 30.5/003.9 30.5/003.9 30.6/-00.9 30.5/-01.4  
13.10.2012  22:35:37  event=22993  rate=0events/s temp/curr=31.8/090.6 31.8/-15.9 31.8/-16.8 31.9/-16.8 30.5/003.9 30.5/003.9 30.5/-00.8 30.5/-01.4  
13.10.2012  22:36:37  event=23023  rate=0events/s temp/curr=31.8/090.6 31.8/-15.9 31.9/-16.8 31.9/-17.0 30.5/003.9 30.5/003.9 30.6/-00.9 30.5/-01.4  
13.10.2012  22:37:37  event=23447  rate=1events/s temp/curr=31.8/090.4 31.8/-15.9 31.9/-16.8 31.9/-17.0 30.5/003.9 30.5/004.1 30.5/-00.9 30.5/-01.4  
13.10.2012  22:38:37  event=23856  rate=0events/s temp/curr=31.8/090.6 31.7/-15.9 31.8/-17.0 31.9/-17.0 30.5/003.9 30.5/003.9 30.5/-00.9 30.5/-01.3  
13.10.2012  22:39:39  event=23875  rate=0events/s temp/curr=31.8/090.6 31.8/-15.9 31.8/-17.0 31.8/-16.8 30.5/003.9 30.5/003.9 30.5/-00.9 30.4/-01.4  
13.10.2012  22:40:38  event=23902  rate=2events/s temp/curr=31.8/090.6 31.8/-15.9 31.8/-16.8 31.8/-17.0 30.5/003.9 30.4/003.9 30.5/-00.9 30.5/-01.4  
13.10.2012  22:41:38  event=23919  rate=0events/s temp/curr=31.8/090.6 31.8/-15.9 31.8/-17.0 31.8/-17.0 30.4/003.9 30.4/003.9 30.4/-00.9 30.5/-01.4  
13.10.2012  22:42:40  event=23945  rate=0events/s temp/curr=31.8/090.6 31.8/-16.0 31.9/-16.8 31.8/-16.8 30.4/003.9 30.5/003.9 30.4/-00.9 30.5/-01.4  
13.10.2012  22:43:39  event=24272  rate=0events/s temp/curr=31.8/090.6 31.7/-16.0 31.8/-17.0 31.7/-17.0 30.4/003.9 30.5/003.9 30.4/-00.9 30.4/-01.4  
13.10.2012  22:44:39  event=24357  rate=0events/s temp/curr=31.8/090.4 31.8/-15.9 31.8/-16.8 31.7/-17.0 30.4/003.9 30.5/003.9 30.4/-00.9 30.5/-01.4  
13.10.2012  22:45:39  event=25049  rate=41events/s temp/curr=31.8/090.6 31.7/-15.9 31.8/-17.0 31.8/-17.0 30.4/003.9 30.4/003.9 30.4/-00.9 30.4/-01.4  
13.10.2012  22:46:39  event=25381  rate=0events/s temp/curr=31.8/090.6 31.8/-15.9 31.8/-16.8 31.8/-16.8 30.4/003.9 30.4/003.9 30.4/-00.9 30.4/-01.4  
13.10.2012  22:47:39  event=25408  rate=0events/s temp/curr=31.8/090.6 31.8/-16.0 31.8/-16.8 31.8/-16.8 30.4/003.9 30.4/003.9 30.4/-00.9 30.4/-01.4  
13.10.2012  22:48:39  event=25971  rate=0events/s temp/curr=31.8/090.6 31.8/-15.9 31.8/-16.8 31.8/-16.8 30.4/003.9 30.4/003.9 30.4/-00.9 30.4/-01.4  
13.10.2012  22:49:39  event=25995  rate=0events/s temp/curr=31.8/090.6 31.8/-15.9 31.8/-17.0 31.8/-17.0 30.4/003.9 30.4/003.9 30.4/-00.9 30.4/-01.4  
13.10.2012  22:50:39  event=26431  rate=42events/s temp/curr=31.8/090.4 31.7/-15.9 31.8/-16.8 31.7/-17.0 30.4/003.9 30.4/003.9 30.4/-00.9 30.4/-01.4  
13.10.2012  22:51:40  event=27036  rate=0events/s temp/curr=31.8/090.6 31.7/-16.0 31.7/-17.0 31.8/-17.0 30.4/004.1 30.4/003.9 30.4/-00.9 30.4/-01.3  
13.10.2012  22:52:40  event=27440  rate=0events/s temp/curr=31.7/090.6 31.8/-16.0 31.8/-16.8 31.8/-17.0 30.4/003.9 30.4/003.9 30.4/-00.9 30.4/-01.4  
13.10.2012  22:53:39  event=28059  rate=0events/s temp/curr=31.7/090.6 31.7/-16.0 31.8/-16.8 31.8/-17.0 30.4/003.9 30.3/003.9 30.3/-00.9 30.4/-01.4  
13.10.2012  22:54:39  event=28327  rate=0events/s temp/curr=31.7/090.6 31.7/-15.9 31.7/-16.8 31.7/-17.0 30.4/003.9 30.4/004.1 30.4/-00.9 30.4/-01.4  
13.10.2012  22:55:38  event=28824  rate=42events/s temp/curr=31.7/090.4 31.7/-16.0 31.8/-16.8 31.7/-17.0 30.4/003.9 30.4/004.1 30.4/-00.9 30.4/-01.4  
13.10.2012  22:56:38  event=29528  rate=0events/s temp/curr=31.7/090.6 31.7/-16.0 31.7/-16.8 31.7/-17.0 30.4/003.9 30.4/004.1 30.4/-00.9 30.3/-01.4  
13.10.2012  22:57:38  event=29933  rate=0events/s temp/curr=31.7/090.4 31.8/-16.0 31.7/-16.8 31.8/-17.0 30.3/003.9 30.4/003.9 30.4/-00.9 30.3/-01.4  
13.10.2012  22:57:47  event=30000  Writing signal file D:\cern12\belle_stack3\data\run004.sig...done 
13.10.2012  22:57:48  event=30000  DAQ stop (mode: Hardware (Normal Run)) 
13.10.2012  22:57:48  event=30000  Writing properties file D:\cern12\belle_stack3\data\run004.pro...done 
13.10.2012  22:58:38  event=0  rate=0events/s temp/curr=31.8/090.6 31.8/-15.9 31.8/-16.8 31.7/-17.0 30.4/003.9 30.4/004.1 30.4/-00.9 30.4/-01.4  
   |  
| 
  9  
 | 
Sat Oct 13 19:04:02 2012 | 
Manfred Valentan | MicronOrigami_gross | run with Belle stack 3 | run003 | 30k | 13.10.2012  19:02:31 |   | Unknown |   Belle stack 3: 2DSSD-Origami, Wedge_New_1, Wedge_old 
HV = +- 50V 
I_ges = 11.6 µA 
Position of xy table: 
x = 49, y = -1 
Temperatures at start of run: 
Measurement on cooling pipe: 
Origami IN: -15,5 degC 
Origami OUT = Wedge_New_1 IN: -5,5 degC 
Micron_New_1 OUT = Wedge_Old IN: +9,0 degC 
Micron_Old OUT: +8.2 degC 
Measurement on cooling block 
Wedge_New_1: +14.6 degC 
Wedge_Old: +18.7 degC 
   |  
| 
  7  
 | 
Sat Oct 13 06:55:47 2012 | 
Manfred Valentan | MicronBaby | run | run002 | 234019 | 13.10.2012  06:50:00 | 13.10.2012  13:50:40 | Unknown |  Micron baby stack 
HV = -100V   I=5.4uA 
beam on 
  
Final DESY position (center of vertical beam profile) 
Module position: 0 / -13.0 -- hitting the lower half of the sensor (centered on even APVs) 
Run interrupted due to RF transmitter fault.  |  
| 
  4  
 | 
Fri Oct 12 23:10:14 2012 | 
Christian Irmler | MicronBaby | run | run001 | 333000 | 12.10.2012  23:05:19 | 13.10.2012  06:29:00 | Good |  Micron baby stack 
HV = -100V   I=5.8uA 
beam on 
  
Final DESY position (center of vertical beam profile) 
Module position: 0 / +5.0 -- hitting the upper half of the sensor (centered on odd APVs)  |  
| 
  3  
 | 
Fri Oct 12 22:00:52 2012 | 
Christian Irmler | MicronBaby | cal | cal001 | 83800 | 12.10.2012  21:16:33 | 12.10.2012  21:59:02 | Good |  12.10.2012  21:16:33  event=0  Disk space: Needed=0.00 GB, Available=206.59 GB, Total=931.51 GB 
12.10.2012  21:16:33  event=0  DAQ start (mode: Calibration Scan) 
12.10.2012  21:16:33  event=0  Init NECO... done 
12.10.2012  21:16:34  event=0  Init APVs... done 
12.10.2012  21:16:37  event=0  Send 10 dummy triggers to initialize APV pedestals... done 
12.10.2012  21:16:37  event=0  Init FADCs... done 
12.10.2012  21:16:37  event=0  Taking 600 pedestal events 
12.10.2012  21:16:45  event=599  Pedestal and Noise evaluation done - switching to Calibration Scan 
12.10.2012  21:17:39  event=2459  rate=8events/s temp/curr=32.7/097.5 32.7/-08.2 32.7/-08.3 32.8/-08.3 31.2/001.6 31.2/001.7 31.2/001.6 31.2/001.4  
12.10.2012  21:18:43  event=4023  rate=8events/s temp/curr=32.6/097.3 32.7/-08.2 32.7/-08.5 32.7/-08.3 31.1/001.6 31.1/001.6 31.1/001.6 31.1/001.6  
12.10.2012  21:19:49  event=5600  rate=50events/s temp/curr=32.7/097.5 32.6/-08.3 32.6/-08.3 32.6/-08.3 31.1/001.6 31.1/001.6 31.1/001.6 31.1/001.6  
12.10.2012  21:20:53  event=7990  rate=7events/s temp/curr=32.6/097.5 32.6/-08.2 32.6/-08.5 32.6/-08.3 31.1/001.6 31.0/001.6 31.1/001.6 31.0/001.6  
12.10.2012  21:21:59  event=8694  rate=6events/s temp/curr=32.5/097.3 32.6/-08.2 32.6/-08.5 32.6/-08.3 31.1/001.6 31.0/001.6 31.0/001.6 31.0/001.6  
12.10.2012  21:23:02  event=11116  rate=66events/s temp/curr=32.5/097.3 32.6/-08.3 32.5/-08.3 32.5/-08.3 31.0/001.4 31.0/001.7 31.0/001.6 31.0/001.6  
12.10.2012  21:24:06  event=13095  rate=7events/s temp/curr=32.5/097.3 32.5/-08.3 32.5/-08.3 32.5/-08.3 31.0/001.6 30.9/001.6 31.0/001.6 31.0/001.6  
12.10.2012  21:25:08  event=15105  rate=5events/s temp/curr=32.4/097.5 32.5/-08.3 32.5/-08.3 32.5/-08.3 31.0/001.6 30.9/001.6 30.9/001.6 31.0/001.6  
12.10.2012  21:26:13  event=16444  rate=7events/s temp/curr=32.5/097.3 32.4/-08.3 32.4/-08.3 32.5/-08.3 30.9/001.6 30.9/001.6 31.0/001.6 31.0/001.6  
12.10.2012  21:27:22  event=18050  rate=6events/s temp/curr=32.4/097.5 32.4/-08.3 32.4/-08.5 32.4/-08.5 30.9/001.6 30.9/001.6 30.9/001.6 30.9/001.6  
12.10.2012  21:28:25  event=19878  rate=8events/s temp/curr=32.4/097.3 32.4/-08.3 32.4/-08.3 32.4/-08.3 30.7/001.6 30.9/001.6 30.9/001.6 30.7/001.6  
12.10.2012  21:29:26  event=21875  rate=7events/s temp/curr=32.3/097.3 32.3/-08.2 32.4/-08.3 32.3/-08.3 30.7/001.4 30.7/001.6 30.7/001.6 30.7/001.6  
12.10.2012  21:30:28  event=24200  rate=50events/s temp/curr=32.3/097.3 32.3/-08.2 32.3/-08.3 32.3/-08.5 30.7/001.6 30.7/001.7 30.7/001.6 30.7/001.6  
12.10.2012  21:31:33  event=26300  rate=50events/s temp/curr=32.4/097.5 32.3/-08.2 32.4/-08.3 32.3/-08.3 30.7/001.6 30.7/001.7 30.7/001.6 30.7/001.6  
12.10.2012  21:32:41  event=28400  rate=9events/s temp/curr=32.3/097.3 32.3/-08.3 32.2/-08.3 32.3/-08.3 30.7/001.6 30.7/001.6 30.7/001.6 30.6/001.6  
12.10.2012  21:33:43  event=30300  rate=50events/s temp/curr=32.3/097.5 32.3/-08.3 32.3/-08.3 32.3/-08.3 30.7/001.6 30.7/001.6 30.7/001.6 30.7/001.6  
12.10.2012  21:34:46  event=32242  rate=42events/s temp/curr=32.2/097.5 32.3/-08.3 32.2/-08.5 32.3/-08.3 30.7/001.6 30.7/001.7 30.7/001.6 30.6/001.4  
12.10.2012  21:35:50  event=34167  rate=67events/s temp/curr=32.2/097.3 32.3/-08.3 32.2/-08.3 32.2/-08.3 30.7/001.6 30.7/001.6 30.7/001.6 30.7/001.4  
12.10.2012  21:36:54  event=35928  rate=7events/s temp/curr=32.2/097.3 32.2/-08.3 32.0/-08.3 32.2/-08.3 30.6/001.4 30.7/001.6 30.7/001.6 30.6/001.4  
12.10.2012  21:37:54  event=38470  rate=8events/s temp/curr=32.0/097.5 32.2/-08.3 32.2/-08.3 32.2/-08.3 30.6/001.6 30.6/001.6 30.6/001.6 30.6/001.6  
12.10.2012  21:39:00  event=40751  rate=1events/s temp/curr=32.2/097.5 32.2/-08.2 32.2/-08.3 32.2/-08.3 30.6/001.6 30.6/001.6 30.6/001.6 30.6/001.6  
12.10.2012  21:40:04  event=42861  rate=7events/s temp/curr=32.2/097.5 32.2/-08.3 32.2/-08.3 32.2/-08.3 30.6/001.6 30.6/001.6 30.6/001.6 30.6/001.6  
12.10.2012  21:41:05  event=44950  rate=50events/s temp/curr=32.2/097.5 32.2/-08.2 32.0/-08.3 32.2/-08.3 30.5/001.6 30.6/001.6 30.6/001.6 30.6/001.6  
12.10.2012  21:42:10  event=47954  rate=4events/s temp/curr=32.2/097.5 32.2/-08.2 32.2/-08.5 32.2/-08.3 30.5/001.6 30.5/001.6 30.5/001.6 30.5/001.6  
12.10.2012  21:43:18  event=49909  rate=7events/s temp/curr=32.2/097.3 32.0/-08.3 32.2/-08.3 32.2/-08.3 30.5/001.6 30.5/001.6 30.6/001.6 30.5/001.6  
12.10.2012  21:44:17  event=52950  rate=68events/s temp/curr=32.0/097.3 32.2/-08.3 32.0/-08.3 32.0/-08.3 30.5/001.6 30.5/001.6 30.5/001.6 30.5/001.6  
12.10.2012  21:45:17  event=55800  rate=50events/s temp/curr=32.2/097.3 32.2/-08.2 32.2/-08.3 32.2/-08.3 30.4/001.6 30.5/001.6 30.5/001.6 30.5/001.6  
12.10.2012  21:46:18  event=59281  rate=31events/s temp/curr=32.2/097.5 32.2/-08.2 32.2/-08.5 32.0/-08.3 30.5/001.6 30.5/001.6 30.5/001.6 30.5/001.6  
12.10.2012  21:47:19  event=61723  rate=73events/s temp/curr=32.0/097.5 32.0/-08.2 32.2/-08.5 32.0/-08.3 30.4/001.6 30.5/001.6 30.5/001.6 30.4/001.6  
12.10.2012  21:48:20  event=64750  rate=60events/s temp/curr=32.0/097.3 32.2/-08.2 32.0/-08.5 32.0/-08.5 30.5/001.6 30.5/001.6 30.5/001.6 30.4/001.6  
12.10.2012  21:49:21  event=66450  rate=50events/s temp/curr=32.0/097.3 32.2/-08.3 32.0/-08.3 32.0/-08.3 30.5/001.6 30.5/001.7 30.4/001.6 30.5/001.6  
12.10.2012  21:50:23  event=69850  rate=2events/s temp/curr=32.0/097.5 32.0/-08.3 32.0/-08.5 32.0/-08.3 30.5/001.6 30.4/001.6 30.5/001.6 30.5/001.6  
12.10.2012  21:51:23  event=73142  rate=7events/s temp/curr=32.0/097.3 32.2/-08.3 32.0/-08.3 32.0/-08.3 30.4/001.6 30.5/001.6 30.4/001.6 30.4/001.4  
12.10.2012  21:52:33  event=74250  rate=5events/s temp/curr=32.0/097.3 31.9/-08.2 32.0/-08.3 32.0/-08.3 30.4/001.6 30.4/001.6 30.4/001.6 30.4/001.6  
12.10.2012  21:53:43  event=75006  rate=30events/s temp/curr=32.0/097.3 32.0/-08.3 32.0/-08.3 32.0/-08.3 30.4/001.6 30.4/001.6 30.4/001.6 30.4/001.4  
12.10.2012  21:54:45  event=76973  rate=6events/s temp/curr=32.0/097.3 32.0/-08.3 32.0/-08.5 32.0/-08.3 30.4/001.6 30.4/001.6 30.3/001.6 30.4/001.6  
12.10.2012  21:55:49  event=78788  rate=6events/s temp/curr=32.0/097.5 31.9/-08.2 31.9/-08.3 32.0/-08.3 30.4/001.6 30.4/001.6 30.3/001.6 30.4/001.6  
12.10.2012  21:56:57  event=80261  rate=7events/s temp/curr=32.0/097.5 31.9/-08.2 31.9/-08.3 32.0/-08.3 30.4/001.4 30.4/001.6 30.4/001.6 30.4/001.6  
12.10.2012  21:57:58  event=82550  rate=64events/s temp/curr=31.9/097.3 32.0/-08.3 31.9/-08.3 31.9/-08.3 30.4/001.6 30.4/001.6 30.4/001.6 30.3/001.6  
12.10.2012  21:58:54  event=83800  Processing calibration data... done 
12.10.2012  21:58:55  event=83800  Writing calibration file D:\cern12\micronbaby\data\cal001.cal...done 
12.10.2012  21:59:02  event=83800  DAQ stop (mode: Calibration Scan) 
12.10.2012  21:59:02  event=83800  Writing properties file D:\cern12\micronbaby\data\cal001.pro...done 
   |  
| 
  1  
 | 
Fri Oct 12 15:04:55 2012 | 
Marko Dragicevic | common | Network configuration |   |   |   |   | Unknown |  Router: 
IP 137.138.113.230 
Hostname ROUTERHEPHY.cern.ch 
connected on outlet 0887-1:4602/02 
Devices 
DAQPC: 192.168.0.36 
Slowcontrol (REINRAUMLAPTOP): 192.168.0.37 
AnneKathrinPC (AOH): 192.168.0.40 
GPIB->Ethernet: 192.168.0.240 
Coolingbox: 192.168.0.148 
XY Table: 192.168.0.13 
VAIO (CONF1): 192.168.0.42 
BeamControl: 137.138.113.210 CWO-HNA447-H6A.CERN.CH 
VMheros am DAQPC: 192.168.0.47 
  
Port Forwards: 
DAQPC (192.168.0.36): 5901 
Slowcontrol (192.168.0.37): 5902 
AnneKathrinPC (192.168.0.40): 5903 
VAIO (CONF1) (192.168.0.42): 5904 
VMheros am DAQPC (192.168.0.47): 5022 
Comments: 
Remote Control von CESAR: 
$ x11vnc -bg -forever  |  
| 
  2  
 | 
Fri Oct 12 19:42:36 2012 | 
Christian Irmler | MicronBaby | Configuration of normal stack |   |   |   |   | Unknown |  Micron baby stack with all strips connected to APV chips 
n-side faces the beam, p-side not read out. 
Channels counting from bottom to top 
Modules as seen by the beam: 
Module name                      z-position [mm]                        Sensor ID 
COMM-1                               0.0                                               B2Micron_2965_10_baby2 
COMM-2                               24.7                                             B2Micron_2965_14_baby2 
SPRAY-1                              49.4                                             B2Micron_2825_05_baby3 
SPRAY-2                              75.5                                             B2Micron_2825_05_baby4 
COMB-1                               100.9                                           B2Micron_2965_10_baby4 
COMB-2                               135.0                                           B2Micron_2965_14_baby4 
ATOLL-1                              159.0                                           B2Micron_2965_14_baby3 
ATOLL-2                              183.7                                           B2Micron_2965_17_baby3  |  
| Attachment 1: micronbaby_stack_geometry.jpg
 |    |  
| 
  5  
 | 
Fri Oct 12 23:51:35 2012 | 
Markus Friedl | common | Zimmernummer & Telefonnummern |   |   |   |   | Unknown |  2nd week: 
Markus: 38 - 420   (phone: 70 420) 
Thomas: 38 - 431   (phone: 70 431) 
Chrisu: 38 - 428   (phone:  70 428) 
Manni: 38 - 434   (phone: 70 434) 
  
1st week: 
Markus: 41 - 130   (phone: 60 130) 
Annekathrin: 41 - 206   (phone: 60 206) 
Thomas: 39 - 108   (phone: 79 108) 
Chrisu: 41 - 224   (phone: 60 224) 
Manni: 39 - 317   (phone: 79 317) 
Marko: 39 - 206   (phone: 79 206) 
  
HEPHYs CERN Handy: 162471  
  
Bat. 887 HNA-451:  C3568Y 
Bat. 887 HNA-447: 12345 (westseitige Tür)  |  
| 
  6  
 | 
Fri Oct 12 23:52:57 2012 | 
Markus Friedl | common | Sozialisierung |   |   |   |   | Unknown |  Prost, Bergi! 
(Das ist nur ein Test, ob du wirklich all die Elog-Emails liest.)  |  
| 
  8  
 | 
Sat Oct 13 14:44:47 2012 | 
Manfred Valentan | MicronOrigami_gross | Stack configuration, Belle Stack 3 |   |   |   |   | Unknown |  Module in Beamrichtung: 
2-DSSD Origami  -z 
2-DSSD Origami ce 
1 Micron Wedge New 
1 Micron Wedge Old 
n-Seite: Beam abgewand 
p-Seite: Beam zugewand 
Ausleserichtung Origami: 
n-Seite aufsteigend links -> rechts 
p-Seite aufsteigend oben -> unten 
Ausleserichtung Wedge: 
p-Seite: unten -> oben 
n-Seite: rechts -> links 
Breite Seite der Wedge Sensoren links 
Auslese der p-Seite mit 4 APVs: 
Origami: Obere 4 APVs (letzte 2 APVs nicht ausgelesen, unten) 
Micron: APVs 4,5 nicht ausgelesen (2 obersten) 
Micron new: APV0 auf n-Seite I²C - Fehler, APV3 auf p-Seite hat 1/2 Signal 
  
   |  
| 
  10  
 | 
Sat Oct 13 19:04:23 2012 | 
Markus Friedl | MicronOrigami_gross | CO2 cooling |   |   |   |   | Unknown |  Wir haben ja schon seit langem vermutet, dass man mit reiner Gasphase nicht kühlen kann. Jetzt erbringen wir den experimentellen Beweis dafür. 
Expandierendes Gas kühlt zwar auch, aber nicht so tief runter und vor allem sind beträchtliche Temperaturdifferenzen zwischen den einzelnen Modulen zu beobachten. Das erste Origami bekommt etwa -13°C aber bis zum letzten Micron sind wir auf Raumtemperatur. 
Warum das Ganze? Weil Bergi eine CO2-Batterie ohne Steigrohr bestellt hat. Annekathrin ist zwar froh, dass wir das herausgefunden hat und nicht ihre Anlage schuld ist, aber auch traurig, weil dieser Testbeam natürlich die Krönung ihrer Diplomarbeit hätte sein sollen. 
Bestellung 27.9.2011 (EDH: Material Request 4732023): SCEM 60.04.15.150.4 = CO2 30 BK 12 CYL. 450 KG (TP); Price: 671 CHF -- das "TP" steht für tube plongeur, zu deutsch: Steigrohr 
Bestellung 15.9.2012 (EDH: Material Request 5033041): SCEM 60.04.15.110.3 = CO2 30 BK 12 CYL. - 450 KG; Price: 391 CHF -- das ist erstens eine Andere SCEM (die von 2011 gibt es nicht mehr) und es steht kein "TP". Allein die andere Nummer hätte eine Rückfrage bei Annekathrin implizieren müssen. 
Bergi: Das kostet dich ein großes "sumimasen". 
Derzeit laufen wir mit Gaskühlung, aber natürlich denken wir schon an einen Plan B. 
Über den offiziellen Weg am CERN kriegen wir niemals rechtzeitig CO2-Flaschen, weil die im Store gar nicht lagernd sind. 
Montag früh könnten wir mit dem großen Auto zu einem Gashändler in der Nähe fahren und hoffen, dass dort 3 große Gasflaschen mit Steigrohr auf Lager sind. Batterie ist natürlich hoffnungslos, das können wir nicht ohne fremde Hilfe transportieren, einzelne Flaschen hingegen schon. 
Eine andere Frage wäre, ob Hans Postema et al. ein paar richtige Gasflaschen auf Lager haben, die wir uns kurzfristig ausborgen könnten.  |  
| 
  13  
 | 
Sun Oct 14 02:00:12 2012 | 
Manfred Valentan | MicronBaby | Configuration of intermediate stack |   |   |   |   | Unknown |  Micron baby stack with every other strip connected to APV chips 
n-side faces the beam, p-side not read out. 
Channels counting from bottom to top 
Modules as seen by the beam: 
Module name                      z-position [mm]                        Sensor ID 
COMM-I-1                             0.0                                               B2Micron_2965_16_baby2 
COMM-I-2                             26.0                                             B2Micron_2965_17_baby2 
SPRAY-I-1                            50.4                                             B2Micron_2825_15_baby2  (known issue: I2C-error of APV3) 
SPRAY-I-2                            76.2                                             B2Micron_2825_15_baby3 
COMB-I-1                             101.8                                           B2Micron_2965_16_baby4 
COMB-I-2                             136.8                                           B2Micron_2965_17_baby4 
ATOLL-I-1                            161.0                                           B2Micron_2965_10_baby3 
ATOLL-I-2                            185.3                                           B2Micron_2965_13_baby3  |  
| 
  20  
 | 
Mon Oct 15 18:52:18 2012 | 
Marko Dragicevic | MicronOrigami_gross | Stack configuration, Belle Stack 2 |   |   |   |   | Unknown |  Belle stack 2: 
Modules: 
    - Origami #4
 
    - Origami #3
 
    - Wedge new 1
 
    - Wedge old
 
 
n-Seite: Beam abgewand 
p-Seite: Beam zugewand 
Ausleserichtung Origami und Wedge: 
    - n-Seite: rechts -> links
 
    - p-Seite: unten -> oben
 
 
Breite Seite der Wedge Sensoren links 
Auslese der p-Seiten mit 4 APVs: 
Origami: die beiden obersten APVs (#4,5) nicht ausgelesen 
Micron: die beiden obersten APVs (#4,5) nicht ausgelesen 
Micron new: APV0 auf n-Seite I²C - Fehler 
Temperatur sensors: 
    - T11: Origami #4 in
 
    - T12: Origami #4 out
 
    - T13: Origami #3 in (wrong values!)
 
    - T14: Origami #3 out
 
    - T15: Wedge new 1 out
 
    - T16: Wedge old out
 
    - T17: Wedge new 1 cooling block
 
    - T18: Wedge old cooling block
 
 
   |  
| 
  21  
 | 
Mon Oct 15 19:21:56 2012 | 
Marko Dragicevic | common | Beam settings and profile |   |   |   |   | Unknown |  Beam setting file: 
H6A.804: FM HAD (H8=+180, H6=120@0mrad) PARALL IN H6A; RD42 
Kommentar (Marko): 
Das alte Beam Setting File war optimiert fuer H6B, sprich der Beam Focus war dort. Dieses Setting ist neuer und hat den Focus in H6B.  |  
| Attachment 1: NetBeans_IDE_3.5_15-Oct-12_19-28-32.png
 |    |  
| 
  30  
 | 
Tue Oct 16 23:03:09 2012 | 
Markus Friedl | common | Sozialisierung |   |   |   |   | Unknown |  So steuert man einen Testbeam! 
 
  |  
| Attachment 1: IMAG2041.jpg
 |    |  
| 
  34  
 | 
Wed Oct 17 14:06:24 2012 | 
Markus Friedl | MicronOrigami_gross | Stack für stealth parasitic mode |   |   |   |   | Good |  Dieser Stack wird jetzt quasi als Pausenkasperl eingebaut und läuft im "stealth parasitic" mode während der Irradiation-Woche. Gut, dass wir alles auch von Wien aus fernsteuern können :-) 
  
 
  |  
| 
  36  
 | 
Thu Oct 18 09:14:07 2012 | 
Manfred Valentan | common | Fahrt nach Mol |   |   |   |   | Unknown |   Liebe Kollegen, 
wir brechen. auf. Wünscht uns Glück!  |  
| 
  59  
 | 
Wed Oct 24 17:24:40 2012 | 
Thomas Bergauer | MicronOrigami_gross | run ohne Strom ;-( | run028 |   |   |   | Unknown |    
Belle Stack 4: 2 DSSD -z, Origami #3, #1, wedge new #2 
HV = +-2.5V, Ibias=14.5uA 
Position: APVs #2, 7, 11, 15 | # 17/18, 21, 25, 29 
= p: 2DSSD #2, Origami3 #3, Origami1 #3, wedgenew #3 
= n: 2DSSD #1/2, Origami3 #1, Origami1 #1, wedgenew #1 
  
NO DATATAKING BECAUSE OF POWER FAILURE AT NIM CRATE (counter finster, warum?). Georg schaut sich das an, sobald in der zone access ist. 
Auch AnnekathrinPC ist nicht erreichbar.  
   |  
| 
  80  
 | 
Wed Oct 31 15:54:59 2012 | 
Christian Irmler | common | Ethernetkabel zu H6A |   |   |   |   | Unknown |  Ethernetkabel HNA447 -> H6A: 
Das obere Ende im Counting Hut liegt im Zwischenboden unterhalb der orangenen Steckdose beim Eingang mit dem elektronischen Zahlenschloß. 
Das untere Ende in der Zone hängt aufgerollt an einem Pfeiler der Kabeltasse, unweit der Stelle an der das Kabel von oben hinunter gelassen wurden. Das ist ewta dort wo die Stiege zu PPE146 endet. 
siehe Fotos :)  |  
| Attachment 1: 2012-10-31_15.47.42.jpg
 |    |  
| Attachment 2: 2012-10-31_12.28.32.jpg
 |    |  
 
 |