| ID |
Date |
Author |
Project |
Subject |
Run Number |
Events |
XYPosition |
Cooling |
Data |
Text |
 |
|
49
|
Mon Jun 8 10:47:44 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run with TLU and Telescope | hw057 | 50000 | 9 | No | Good | RUN WITH SVD3 plus telescope
EUDET Run 57
Mimosa Threshold 6 |
|
|
52
|
Mon Jun 8 14:48:27 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 016 | ~96k | 9 | Yes | Good | cooled (see attachment) in --21.24 out
-18-54
FIRRun002, PedestalRun006 |
|
|
23
|
Sat Jun 6 16:48:41 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 008 | 50000 | 8 | No | Good | room temp, FIRRun002, PedestalRun005, room
temp
target: FW, pos 8 (p-0, n-0) |
20x |
|
47
|
Mon Jun 8 09:21:01 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 015 | 70000 | 8 | Yes | Good | cooled (see attachment) in - 21 out -18
FIRRun002, PedestalRun006
target: fw, pos 8 |
|
|
48
|
Mon Jun 8 09:37:30 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run with TLU and Telescope | hw056 | 50000 | 8 | No | Good | RUN WITH SVD3 plus telescope
EUDET Run 56
Mimosa Threshold 6 |
|
|
71
|
Tue Jun 9 20:27:55 2015 |
Benedikt Würkner | SVD3 (H6B) | Hardware FEI4 | 68 | 503505 | 8 | No | Unknown | RUN WITH SVD3, telescope and FEI4
EUDET Run 68
Mimosa Threshold 6 |
|
|
91
|
Thu Jun 11 17:11:40 2015 |
Benedikt Würkner | SVD3 (H6B) | Hardware FEI4 | 74 | 20000 | 8 | No | Unknown | RUN WITH SVD3, telescope and FEI4
EUDET Run 74
Mimosa Threshold 6 |
|
|
19
|
Sat Jun 6 14:28:28 2015 |
Hao Yin | Belle II FADC (H6A) | Harware | 007 | 50000 | 7 | No | Good | room temp, FIRRun002, PedestalRun005, room
temp
target: CE, pos 7 (p-0, n-0) |
20x |
|
46
|
Mon Jun 8 01:28:58 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run with TLU and Telescope | hw055 | 410000 | 7 | No | Good | RUN WITH SVD3 plus telescope
EUDET Run 55
Mimosa Threshold 6 |
|
|
88
|
Thu Jun 11 15:56:32 2015 |
Benedikt Würkner | SVD3 (H6B) | Hardware FEI4 | 73 | 20000 | 7 | No | Unknown | RUN WITH SVD3, telescope and FEI4
EUDET Run 73
Mimosa Threshold 6 |
|
|
90
|
Thu Jun 11 16:38:17 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 023 | | 7 | Yes | Good | temp:
attachment (in 1st col, out 2nd col)
FIRRun002, |
|
|
18
|
Sat Jun 6 12:43:55 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 006 | 50000 | 6 | No | Good | FIRRun002, room temp, pedestalrun005,
layout: same as HW 005
target: -z, pos 6 (strip: p-0, n-0); |
20x |
|
45
|
Sun Jun 7 23:09:46 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run with TLU and Telescope | hw054 | 120000 | 6 | No | Good | RUN WITH SVD3 plus telescope
EUDET Run 54
Mimosa Threshold 6 |
|
|
92
|
Thu Jun 11 18:01:54 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 024 | | 6 | Yes | Good | temp:
attachment (in 1st col, out 2nd col)
FIRRun002, |
|
|
93
|
Thu Jun 11 18:37:11 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 025 | | 6 | Yes | Good | temp:
attachment (in 1st col, out 2nd col)
FIRRun002, |
|
|
17
|
Fri Jun 5 23:39:49 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 005 | ~200k | 5 | No | Good | FIRRun002, pedestalrun005, room temp
Target BW: beam spot at ~ (0 p, 0
n) |
21x |
|
42
|
Sun Jun 7 20:37:56 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run with TLU and Telescope | hw053 | 50000 | 5 | | Good | RUN WITH SVD3 plus telescope
EUDET Run 53
Mimosa Threshold 6 |
|
|
59
|
Mon Jun 8 20:13:59 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 017 | | 5 | Yes | Good | cooled (see attachment) in -21.24 out -18.54
cooling supply emty at ~24:00 ie
first 30k is cooled. |
|
|
64
|
Tue Jun 9 09:50:15 2015 |
Benedikt Würkner | SVD3 (H6B) | Hardware FEI4 | 64 | 50000 | 5 | No | Unknown | RUN WITH SVD3, telescope and FEI4
EUDET Run 64
Mimosa Threshold 6 |
|
|
83
|
Wed Jun 10 19:07:42 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 021 | | 5 | Yes | Good | temp:
in -23 out -20
FIRRun002, |
|
|
89
|
Thu Jun 11 16:35:14 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 022 | | 5 | Yes | Good | temp:
in -23 out -20
FIRRun002, |
|
|
11
|
Fri Jun 5 08:20:27 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 004 | 50000 | 4 | No | Good | room temp, FIRRun002, pedestalrun003, taget
FW |
16x |
|
41
|
Sun Jun 7 20:03:31 2015 |
Thomas Bergauer | SVD3 (H6B) | hardware run with TLU and Telescope | hw052 | 50000 | 4 | No | Good | RUN WITH SVD3 plus telescope
EUDET Run 52
Mimosa Threshold 7 |
|
|
61
|
Mon Jun 8 22:11:07 2015 |
Benedikt Würkner | SVD3 (H6B) | Hardware FEI4 | 63 | 490000 | 4 | No | Unknown | RUN WITH SVD3, telescope and FEI4
EUDET Run 63
Mimosa Threshold 6 |
|
|
101
|
Sat Jun 13 10:07:36 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 028 | 50k | 4 | No | Good | room
temp
FIRRun002, |
|
|
10
|
Thu Jun 4 22:07:16 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 003 | 189k | 3 | No | Good | CE. pedestal run 003. Fir run 002. Room
temp |
21x |
|
40
|
Sun Jun 7 20:03:09 2015 |
Thomas Bergauer | SVD3 (H6B) | hardware run with TLU and Telescope | hw051 | 50000 | 3 | No | Good | RUN WITH SVD3 plus telescope
EUDET Run 51
Mimosa Threshold 7 |
|
|
60
|
Mon Jun 8 20:16:41 2015 |
Benedikt Würkner | SVD3 (H6B) | Hardware FEI4 | 62 | 50000 | 3 | No | Unknown | RUN WITH SVD3, telescope and FEI4
EUDET Run 62
Mimosa Threshold 6 |
|
|
102
|
Sat Jun 13 13:01:39 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 029 | | 3 | No | Good | room
temp
FIRRun002, |
|
|
106
|
Sat Jun 13 19:14:41 2015 |
Benedikt Würkner | SVD3 (H6B) | L3 with FEI4 | 86 | 732000 | 3 | No | Good | L3 sensor at position x: 115, y: 57 hitting
apvs: 1&2 on p-side and apv 3&4
on n-side |
|
|
107
|
Sat Jun 13 19:26:26 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 030 | | 3 | No | Good | room
temp
FIRRun002, |
|
|
7
|
Thu Jun 4 18:44:50 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 002 | 50000 | 2 | No | Good | room temp, FIRRun001, pedestal run 003 |
19x |
|
37
|
Sun Jun 7 15:03:31 2015 |
Thomas Bergauer | SVD3 (H6B) | hardware run with TLU and Telescope | hw050 | 50000 | 2 | No | Good | RUN WITH SVD3 plus telescope
EUDET Run 50
Mimosa Threshold 7 |
|
|
57
|
Mon Jun 8 18:00:06 2015 |
Benedikt Würkner | SVD3 (H6B) | Hardware FEI4 | hw061 | 50000 | 2 | No | Unknown | RUN WITH SVD3, telescope and FEI4
EUDET Run 61
Mimosa Threshold 6 |
|
|
67
|
Tue Jun 9 11:20:25 2015 |
Benedikt Würkner | SVD3 (H6B) | Vertical Beam Profile Run | 65 | 50000 | 2 | No | Unknown | Trying to get a nice plot of the beam profile
by only using the vertical PMTs (number 0
and 2) see http://elog.hephy.at/testbeam-SPS2015/66 |
|
|
68
|
Tue Jun 9 12:34:16 2015 |
Benedikt Würkner | SVD3 (H6B) | Horizontal Beam Profile Run | 66 | 50000 | 2 | No | Unknown | Trying to get a nice plot of the beam profile
by only using the PMTs 1 and 3 (horizontal)
see http://elog.hephy.at/testbeam-SPS2015/66 |
|
|
69
|
Tue Jun 9 14:33:50 2015 |
Benedikt Würkner | SVD3 (H6B) | Vertical Beam Profile Run | 67 | 50000 | 2 | No | Unknown | Trying to get a nice plot of the beam profile
by only using the vertical PMT 0 (upstream
vertical, the long one) see |
|
|
70
|
Tue Jun 9 16:22:59 2015 |
Benedikt Würkner | SVD3 (H6B) | Beam Profile Results | 66 und 67 | | 2 | No | Good | |
|
|
100
|
Sat Jun 13 09:09:37 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 027 | ~200k | 2 | No | Good | room
temp
FIRRun002, |
|
|
105
|
Sat Jun 13 18:02:04 2015 |
Benedikt Würkner | SVD3 (H6B) | L3 with FEI4 | 85 | 70000 | 2 | No | Good | L3 sensor at position x: 115, y: 47 hitting
apvs: 2&3 on p-side and apv 3&4
on n-side |
|
|
51
|
Mon Jun 8 11:57:14 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run with TLU and Telescope | hw058 | 50000 | 10 | No | Good | RUN WITH SVD3 plus telescope
EUDET Run 58
Mimosa Threshold 6 |
|
|
54
|
Mon Jun 8 15:49:23 2015 |
Benedikt Würkner | SVD3 (H6B) | Hardware FEI4 | 60 | 50000 | 10 | No | Unknown | Hardware run with FEI4, Telescope and FW&BW
Modules
Pos 10 |
|
|
84
|
Wed Jun 10 20:54:36 2015 |
Benedikt Würkner | SVD3 (H6B) | Residuals FE-I4 (Upstream) | 59 | | 10 | No | Good | |
|
|
6
|
Thu Jun 4 15:12:41 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 001 | 50000 | 1 | No | Good | PedestalRun001, FIRRun001, room temp
telescope n-side switched.
In order to correct the position change |
20x |
|
33
|
Sun Jun 7 13:18:20 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run with TLU and Telescope | hw008 | 53670 | 1 | No | Good | FIRST GOOD RUN WITH SVD3 plus telescope
EUDET Run 49
Mimosa Threshold 7 |
|
|
65
|
Tue Jun 9 09:57:56 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 019 | 62k | 1 | No | Good | room temp
FIRRun002, PedestalRun007, Calibrationrun003 |
|
|
82
|
Wed Jun 10 19:05:04 2015 |
Benedikt Würkner | SVD3 (H6B) | Hardware FEI4 | 71 | 50000 | 1 | No | Unknown | RUN WITH SVD3, telescope and FEI4
EUDET Run 71
Mimosa Threshold 6 |
|
|
85
|
Wed Jun 10 21:36:25 2015 |
Benedikt Würkner | SVD3 (H6B) | Horizontal Beam Profile Run | 72 | 50000 | 1 | No | Good | Trying to get a nice plot of the beam profile
by only using the and 3 (horizontal)
see http://elog.hephy.at/testbeam-SPS2015/66 |
|
|
99
|
Fri Jun 12 17:11:45 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 026 | 50k | 1 | No | Good | room
temp
FIRRun002, |
|
|
104
|
Sat Jun 13 17:05:35 2015 |
Benedikt Würkner | SVD3 (H6B) | L3 with FEI4 | 84 | 30000 | 1 | No | Good | L3 sensor at position x: 105, y: 47 hitting
apvs: 2&3 on p-side and apv 3 on
n-side |
|
|
108
|
Sat Jun 13 19:29:50 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 030 | | 1 | No | Good | room
temp
FIRRun002, |
|
|
1
|
Tue May 12 10:27:39 2015 |
Benedikt Würkner | SVD3 (H6B) | Setup information | | | | | Unknown | Information concerning the SVD3 setup during
a beam test
In the beam area setup the whole |
|
|
2
|
Wed Jun 3 10:48:42 2015 |
Benedikt Würkner | common | Networking | | | | | Unknown | WLAN Router:
SSID:
Hephy
password: 20supersecret14 |
|
|
3
|
Wed Jun 3 17:23:07 2015 |
Thomas Bergauer | Belle II FADC (H6A) | XY stage positions | | | | | Unknown | x-Achse: positiv Richtung Saleve (counting
room)
|
|
|
4
|
Thu Jun 4 14:15:50 2015 |
Hao Yin | Belle II FADC (H6A) | FIR | 001 | | | | Good | FIR filer and ADC delay with all sensor
and telescope.
telescope n-side switched. |
|
|
5
|
Thu Jun 4 14:16:20 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 001 | 10000 | | | Good | FirRun001, room temp
telescope n-side switched. |
|
|
8
|
Thu Jun 4 18:45:42 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 003 | 10000 | | | Good | firrun003, room temp
|
|
|
9
|
Thu Jun 4 18:49:03 2015 |
Benedikt Würkner | SVD3 (H6B) | Setup | | | | | Unknown | |
|
|
12
|
Fri Jun 5 12:02:29 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 001 | | | | Good | room temp max subevent at 2. with lat =
96 |
|
|
13
|
Fri Jun 5 12:03:34 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 002 | | | | Good | lat = 97 to a greater range of lat scan |
|
|
14
|
Fri Jun 5 19:55:00 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 003 | | | | Unknown | lat = 98
room temp
pedestalrun 003 |
|
|
15
|
Fri Jun 5 19:59:44 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 004 | 10000 | | | Good | update pedestal values for room temp sixlet
runs.
|
|
|
16
|
Fri Jun 5 23:38:51 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 005 | 10000 | | | Unknown | Readjust after cooling box.
room temp, firrun002
|
|
|
20
|
Sat Jun 6 16:14:36 2015 |
Benedikt Würkner | SVD3 (H6B) | calibration run and setup information | cal01 | | | | Unknown | Calibration Run with +- 50V Bias with higher
compliance since the p-side draws more current
than expected (23muA by the MAMBO) |
|
|
21
|
Sat Jun 6 16:17:52 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run | hw002 | 5000 | | | Good | Table: 100:70
Bias: +-50V
Run to confirm trigger delay |
|
|
22
|
Sat Jun 6 16:18:48 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run | hw003 | 50000 | | | Unknown | Table: 100:70
Bias: +-50V
Run to confirm trigger delay |
|
|
24
|
Sat Jun 6 21:00:15 2015 |
Benedikt Würkner | SVD3 (H6B) | first hardware run with TLU and Telescope | hw004 | 117171 | | | Unknown | Table: 100:70
Bias: +-50V
600 pedestal |
|
|
25
|
Sat Jun 6 23:30:29 2015 |
Benedikt Würkner | Belle II FADC (H6A) | Hardware | 009 | | | | Good | room temp, FIRRun002, PedestalRun005, room
temp
target: FW, pos 9 (p-0, n-128*4) |
|
|
26
|
Sun Jun 7 00:58:33 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run | hw006 | | | | Crap | Table: 100:70
Bias: +-50V
600 pedestal |
|
|
27
|
Sun Jun 7 10:36:38 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 006 | 10000 | | | Unknown | Cooled, Temp see attachment
FirRun002
|
|
|
28
|
Sun Jun 7 10:39:56 2015 |
Hao Yin | Belle II FADC (H6A) | Calibration | 002 | | | | Good | Cooled!
FIRRun002, pedestalrun006; temp see
attachment in pedestalrun006 |
|
|
29
|
Sun Jun 7 11:38:04 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run with TLU and Telescope | hw007 | 15000 | | | Good | TLU Run 46
Threshold 8b
Offset 601 |
|
|
30
|
Sun Jun 7 12:10:24 2015 |
Benedikt Würkner | SVD3 (H6B) | Telescope Threshold8b test run | 0046 | 14399 | | | Unknown | Telescope in combination with SVD3 |
|
|
31
|
Sun Jun 7 12:11:42 2015 |
Benedikt Würkner | SVD3 (H6B) | Telescope Threshold7 test run | 0047 | 38175 | | | Unknown | Telescope alone |
|
|
32
|
Sun Jun 7 12:12:00 2015 |
Benedikt Würkner | SVD3 (H6B) | Telescope Threshold7 test run | 0048 | 53356 | | | Unknown | Telescope alone |
|
|
34
|
Sun Jun 7 13:19:19 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 010 | | | | Good | cooled
FIRRun002, PedestalRun006 (temp
enty) |
|
|
35
|
Sun Jun 7 13:21:15 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 011 | 50000 | | | Good | cooled (see attachment)
FIRRun002, PedestalRun006
target: -Z, pos 2 |
|
|
36
|
Sun Jun 7 14:44:29 2015 |
Thomas Bergauer | SVD3 (H6B) | XY Stage and DUT Positions | | | | | Unknown | Coordinate system:
pos x-Direction = Jura side
pos y-Direction = Down |
|
|
38
|
Sun Jun 7 15:59:05 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 012 | 50000 | | | Unknown | cooled (see attachment)
FIRRun002, PedestalRun006
target: CE, pos 2 |
|
|
39
|
Sun Jun 7 20:02:40 2015 |
Hao Yin | Belle II FADC (H6A) | Cooling Box Emergency break | | | | | Unknown | Something triggered a emergency break.
HWRun012 only last 1-10k event has to be
discarded. |
|
|
43
|
Sun Jun 7 23:04:06 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 013 | 50000 | | | Good | cooled (see attachment)
FIRRun002, PedestalRun006
target: CE, pos 3 |
|
|
44
|
Sun Jun 7 23:09:29 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 014 | 224k | | | Good | cooled (see attachment) in - 20,5 out -7,8
FIRRun002, PedestalRun006
target: fw, pos 4 |
|
|
50
|
Mon Jun 8 11:33:24 2015 |
Thomas Bergauer | common | beam profile | | | | | Unknown | 120GeV hadrons, beam config H6A.BELLE.003 |
|
|
53
|
Mon Jun 8 15:03:53 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run with TLU and FEI4 WORKING | 59 | 19000 | | | Unknown | Testrun with the FEI4 working for the first
time.
Lessons learned about the configuration: |
|
|
56
|
Mon Jun 8 16:53:13 2015 |
Benedikt Würkner | SVD3 (H6B) | EUTelescope Fitter not working investigation | | | | | Unknown | Apparently every problem can be attributed
to a misalignment problem. The telescope
has troubles with heavily misaligned DUTs. |
|
|
58
|
Mon Jun 8 18:08:49 2015 |
Thomas Bergauer | SVD3 (H6B) | Telescope online monitor | | | | | Unknown | a working version of the EUDET online monitor
(which works also with the FE-I4) is at the
following location |
|
|
62
|
Tue Jun 9 09:32:41 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 007 | 10000 | | | Good | Room temp, fir002 |
|
|
63
|
Tue Jun 9 09:33:33 2015 |
Hao Yin | Belle II FADC (H6A) | Calibration | 003 | | | | Good | room temp
FIRRun002,
pedestalrun006; |
|
|
66
|
Tue Jun 9 10:01:03 2015 |
Lukas Bulla | SVD3 (H6B) | TLU setup info | | | | | Unknown | Channels:
Upstream vertical ->
channel 0; (bitmask 1)
Upstream |
|
|
72
|
Tue Jun 9 20:30:37 2015 |
Hao Yin | Belle II FADC (H6A) | FIR | 004 | | | | Good | FIR filer and ADC delay with all sensor
and telescope.
Telescope alignment |
|
|
73
|
Tue Jun 9 20:32:46 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 008 | 10000 | | No | Good | Room temp, fir004 |
|
|
74
|
Tue Jun 9 20:36:39 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 020 | 62k | | No | Good | room temp
FIRRun004, PedestalRun008
telescope alignment |
|
|
75
|
Wed Jun 10 10:40:24 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 004 | | | No | Good | room
temp
pedestalrun 008 |
|
|
76
|
Wed Jun 10 11:19:33 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 005 | | | No | Good | room
temp
pedestalrun 008 |
|
|
77
|
Wed Jun 10 12:03:53 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 006 | | | No | Good | room
temp
pedestalrun 008 |
|
|
78
|
Wed Jun 10 12:04:27 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 007 | | | No | Good | room
temp
pedestalrun 008 |
|
|
79
|
Wed Jun 10 13:12:33 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 010 | | | Yes | Good | cooled
pedestalrun 008
FIRRun004 |
|
|
80
|
Wed Jun 10 18:05:03 2015 |
Benedikt Würkner | SVD3 (H6B) | FEI4 configuration | | | | No | Unknown | There are two planes, one fixed upstream
and one fixed downstream.
CIS3WII_6 upstream and CIS2WI_IBL2 |
|
|
81
|
Wed Jun 10 18:52:34 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 009 | 10000 | | Yes | Good | temp: in -22 out -18,
FIRRun004, |
|
|
86
|
Thu Jun 11 11:41:50 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 011 | | | Yes | Good | cooled
pedestalrun 008
FIRRun004 |
|
|
87
|
Thu Jun 11 11:42:39 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 012 | | | Yes | Good | cooled
until about 400k after that room temp
pedestalrun 009 |
|
|
94
|
Fri Jun 12 09:31:58 2015 |
Hao Yin | Belle II FADC (H6A) | FIR | 005 | | | Yes | Good | FIR filer and ADC delay for long sixlet
cal run. |
|
|
95
|
Fri Jun 12 16:52:52 2015 |
Benedikt Würkner | SVD3 (H6B) | Telescope without DUT | 76 | ~30k | | No | Good | Threshold 6
Testrun to see how the telescope
behaves without a DUT to test if there is |
|
|
96
|
Fri Jun 12 17:00:18 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 011 | 10000 | | No | Good | cooled pedestal vaules for long sixlet
cal |
|
|
97
|
Fri Jun 12 17:03:02 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 012 | 10000 | | No | Good | room temp
FIRRun002
|
|
|
98
|
Fri Jun 12 17:08:23 2015 |
Benedikt Würkner | SVD3 (H6B) | Telescope with FEI4 | 80 | ~30k | | No | Good | Threshold 6
Testrun to see how the telescope
behaves without a DUT to test if there is |
|
|
103
|
Sat Jun 13 16:47:28 2015 |
Benedikt Würkner | SVD3 (H6B) | Mimosa threshold with FEI4 | 82 | 12000 | | No | Good | Set mimosa threshold to 5 and recorded
with FEI4 upstream
L3 already in sensor but not yet |
|