Home CMS Production Clean room MedAustron HEPHY testbeams old

electronics module assembly SiDDaTA scratch

HEPHY logbook of the Electronics Group, all entries  Not logged in

Find |  Select |  Login |  Help

New entries since: Thu Jan 1 01:00:00 1970

Full | Summary | Threaded     -- All entries -- Last day Last 3 Days Last week Last month Last 3 Months Last 6 Months Last Year -- Type -- Common Measurement -- Project -- SPS Testbeam June08 Belle II PixelFED -- Measurement Type -- hybrid module source system  64 Entries

Goto page 1, 2, 3, 4

Selected entries:  Tracker Sensor QC HGC Sensor QC Process QC Longterm Visual Inspection Process QC OLD SQC PQC P3 HGC Klimakammer microscopes infrastructure test cleanroom lasersetup module assembly testbeam-MA2023 testbeam-MA2021 testbeam-MA2020 testbeam-MA2019 testbeam-rd50-desy-Oct2024 testbeam-RD50-DESY-Apr2024 testbeam-RD50-DESY-Jul2023 testbeam-RD50-CERN-Oct2022 testbeam-DESY-Oct2017 testbeam-DESY-April2017 testbeam-SPS2015 testbeam-SPS2014 testbeam-DESY14 testbeam-SPS12 testbeam-SPS11 testbeam-SPS10 testbeam-SPS09 testbeam-SPS08 LP-TPC SiDDaTA scratch testbeam-MA2018 testbeam-MA2024

ID Date Author Project Measurement Type Object ID Subject Text   1   Fri Apr 18 17:23:26 2008 Markus Friedl SPS Testbeam June08 hybrid hybrid 01 Noise of hybrid 01, sensor fully bonded, no HV HV bias not yet glued to backplane      2   Tue Apr 22 19:34:09 2008 Markus Friedl SPS Testbeam June08 module hybrid 01 Properties of hybrid 01, sensor fully bonded, HV=100V HV bias glued to backplane, HV=100V  6x    4   Wed Apr 23 13:37:18 2008 Markus Friedl SPS Testbeam June08 source hybrid 01 analysis results of source test Ignore the "KEK November 2007" title - that's a legacy and is already changed :-)      5   Wed Apr 30 16:52:17 2008 Markus Friedl BELLE Upgrade module micron micron sensor glued to frame soeben haben wir den micron-DSSD (double metal layer) in den 2-teiligen rahmen geklebt und auf beiden seiten      14   Tue May 20 14:27:50 2008 Markus Friedl BELLE Upgrade source micron analysis results of source test *** NOTE: AFTER THIS MEASUREMENT WE REALIZED THAT BIASING WAS NOT DONE PROPERLY  9x    37   Tue May 19 09:31:50 2015 Hao Yin       Noise Test ITA Everything works except L3 p-side. The config file is shown in the following:      38   Tue May 19 10:08:53 2015 Hao Yin       FADC system setup success 3 FADC. All Channel/APV25 running (except L3 n first and last -> not connected (bonding)) n-side: all connectors      39   Tue May 19 10:57:19 2015 Hao Yin Belle II system FIR FIR filter first fir filter run: # 1:[0x[FADC ID] in hex], 2:[APV25 ChannelNr], 3-10:[fir coef in float]      40   Tue May 19 11:01:29 2015 Hao Yin Belle II system Pedestal PedestalRun FIRRun001 Baseline measurement without injections, 50000 event,  16x    41   Tue May 19 13:23:16 2015 Hao Yin Belle II system Calibration CalibrationRun001 PedestalRun001, FIRRun001, room temperature, no noise injection      42   Tue May 19 13:42:04 2015 Hao Yin       L6 Noise inJection Setup Test Nr. 1: RLC between DockBox and Hybrid (both side).      43   Tue May 19 14:48:06 2015 Hao Yin Belle II module L6 Noise inJection Runs L6 Noise inJection Runs Folder "L6_RLC_Test" Configuration file: /mnt/data/ITA_NOISE_TESTS/L6_RLC_Test/SinglePeak_3Fadc.cfg 3 Tests: Injkection to 2.5V 1.25V.      44   Wed May 20 10:12:12 2015 Hao Yin       Ladder RLC test (CMC Injection) L5 Ladder Test folder: /mnt/data/ITA_NOISE_TESTS/Ladder_test Setup: ladder      45   Thu May 21 18:23:22 2015 Hao Yin       Noise Injection LV cable (TestNr. 15) injecting sin wave into LV at different      46   Fri May 22 12:01:32 2015 Hao Yin       CMC injection LV 10V Comparison w/o filter (LC) connected to -z_n side. Mateo has the results.      47   Mon May 25 10:38:03 2015 Hao Yin Belle II system L5 Ladder Emission Test Emission (TestNr: 16) base line noise measurement are saved in SYSTEM_CHECK_AFTER_WE.      48   Mon May 25 20:27:23 2015 Hao Yin Belle II system Caen PS base line measurements   Baseline noise measurements wo injection. measure noise in both HV and LV. wings of APV25 using cmc with 128      49   Wed May 27 09:30:54 2015 Hao Yin Belle II system CAEN PS Primary side   Measured Primary side of caen wo load (setup attachment 2 and prelimilary res. attachment 1. )        50   Fri May 29 11:47:56 2015 Hao Yin Belle II system PS Filter Testing PS LV filter and quantifying the required min noise lvl Data of this entry is recorded in the folder: LV315kHz_Injections Injecting noise to LV with a freq.      51   Mon Nov 30 15:12:19 2015 Hao Yin       FIR_ADC config FIR filter and ADC delay test: ADC delay and FIR filter with and without cooling to reproduce error detected      52   Mon Nov 30 15:18:12 2015 Hao Yin Belle II module ADC_DELAY_HOT ADC delay hot ADC delay scan at room temp and 20 min after APV I2C config. measured values at display in the      53   Mon Nov 30 17:11:17 2015 Hao Yin Belle II module FIRRun001 FIRRun001 aft ADC_HOT FirRun 20 min after I2C      54   Mon Nov 30 17:13:47 2015 Hao Yin Belle II system PedestalRun   ADC Hot, FIRRun001 room temp pedrun      55   Mon Nov 30 17:23:51 2015 Hao Yin Belle II system HardwareRun001   ADC Hot, FIRRun001, PedestalRun001 room temp pedrun target: BW      56   Mon Nov 30 17:47:54 2015 Hao Yin Belle II system HardwareRun002   ADC Hot, FIRRun001, PedestalRun001 target: -Z room temp pedrun      57   Mon Nov 30 18:32:13 2015 Hao Yin Belle II system ADC Delay Scan Cold   ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns)      58   Mon Nov 30 18:44:04 2015 Hao Yin Belle II system FIRRun_Cold   ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns)        59   Mon Nov 30 18:45:49 2015 Hao Yin Belle II system PedestalRun_Cold   ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001        60   Mon Nov 30 18:49:23 2015 Hao Yin Belle II system Hardware_Cold   ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001 target: -Z      61   Mon Nov 30 19:01:54 2015 Hao Yin Belle II system Hardware_Cold   ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001 Temp = 0°C      62   Mon Nov 30 19:48:05 2015 Hao Yin Belle II system Hardware_Room_With_Cold_I2C   ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001 with room temp i2c config      63   Mon Nov 30 20:06:15 2015 Hao Yin Belle II system Hardware_Room_With_Cold_I2C   ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001 with room temp i2c config      64   Mon Nov 30 20:16:37 2015 Hao Yin Belle II system Hardware_Room_With_Cold_I2C   ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001 ADC delay shifted by 3 (1.5ns)      65   Mon Nov 30 20:27:42 2015 Hao Yin Belle II system Hardware_Room_With_Cold_I2C   ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001 ADC shifted by 5 (2.5ns) all sensors      67   Mon Nov 30 22:35:41 2015 Hao Yin Belle II system Hardware_Room_With_Cold_I2C   ADC Cold diff to hot: 1-3 adc delay config (max 1.5 ns), FIRRun_Cold_001 ADC shifted by 9 (4.5ns) all sensors      15   Wed Oct 7 14:23:35 2009 Dieter Uhl BELLE Upgrade hybrid #4 hybrid-pitchadapter opens at upper coat      16   Wed Oct 7 14:24:06 2009 Dieter Uhl BELLE Upgrade hybrid #5 hybrid-pitchadapter shorts at upper coat      3   Wed Apr 23 13:05:05 2008 Christian Irmler SPS Testbeam June08 source hybrid 01 time correlation between TDC and sensor measurement -> 3.1 ns RMS        6   Wed May 7 15:24:49 2008 Christian Irmler SPS Testbeam June08 module module 10/02 properties (noise, intcal), APVs bonded to the sensor Module tested with 1 and 2 rows bonded to the sensor, respectively. HV = 100 V Ibias (100V) = 19.1 nA Ibias (200V) = 23.7 nA  12x    9   Wed May 7 15:26:24 2008 Christian Irmler SPS Testbeam June08 module module 20/09 properties (noise, intcal), APVs bonded to the sensor Module tested with 1 and 2 rows bonded to the sensor, respectively.  HV = 100 V Ibias (100 V) = 25.1 nA Ibias (200 V) = 31.4 nA  12x    8   Wed May 7 15:40:07 2008 Christian Irmler SPS Testbeam June08 module module 07/07 properties (noise, intcal), APVs bonded to the sensor Module tested with 1 and 2 rows bonded to the sensor, respectively.  HV = 100 V Ibias (100 V) = 20.2 nA Ibias (200 V) = 21.9 nA  12x    7   Wed May 7 16:12:58 2008 Christian Irmler SPS Testbeam June08 module module 12/08 properties (noise, intcal), APVs bonded to the sensor Module tested with 1 and 2 rows bonded to the sensor, respectively.  HV = 100 V Ibias (100 V) = 22.2 nA Ibias (200 V) = 26.5 nA  12x    10   Wed May 7 19:05:08 2008 Christian Irmler SPS Testbeam June08 module module 04/04 properties (noise, intcal), APVs bonded to the sensor Module tested with 1 and 2 rows bonded to the sensor, respectively.  HV = 100 V Ibias (100 V) = 27.8 nA Ibias (200 V) = 32.7 nA  12x    11   Fri May 9 09:56:15 2008 Christian Irmler SPS Testbeam June08 module module 06/03 properties (noise, intcal), APVs bonded to the sensor Module tested with 1 and 2 rows bonded to the sensor, respectively.  HV = 100 V Ibias (100 V) = 26.5 nA Ibias (200 V) = 37.8 nA  12x    12   Fri May 9 10:00:34 2008 Christian Irmler SPS Testbeam June08 module module 03/10 properties (noise, intcal), APVs bonded to the sensor Module tested with 1 and 2 rows bonded to the sensor, respectively.  HV = 100 V Ibias (100 V) = 18.9 nA Ibias (200 V) = 25.5 nA  12x    13   Fri May 9 10:04:26 2008 Christian Irmler SPS Testbeam June08 module module 05/05 properties (noise, intcal), APVs bonded to the sensor Module tested with 1 and 2 rows bonded to the sensor, respectively.  HV = 100 V Ibias (100 V) = 18.0 nA Ibias (200 V) = 23.6 nA  12x    17   Sun Jul 4 05:48:36 2010 Christian Irmler BELLE Upgrade source Origami 6 - module 1 run002: first analysis results Run name: run002 Run type: 0 (Hardware (Normal Run))  7x    18   Wed May 7 14:36:29 2014 Benedikt Würkner Belle II source L3 module No 1 of 6 room temperature measurements using Sr90 Source (multi6) Sr90 Radioactive Source No cooling Module position: -5:-20(top left)  10x    19   Wed May 7 15:04:32 2014 Benedikt Würkner Belle II source L3 module No 2 of 6 room temperature measurements using Sr90 Source (multi6) Sr90 Radioactive Source No cooling Module position: -32:-20(top center)  10x    20   Wed May 7 15:53:38 2014 Benedikt Würkner Belle II source L3 module No 3 of 6 room temperature measurements using Sr90 Source (multi6) Sr90 Radioactive Source No cooling Module position: -59:-20(top right)  10x    21   Wed May 7 16:43:37 2014 Benedikt Würkner Belle II source L3 module No 4 of 6 room temperature measurements using Sr90 Source (multi6) Sr90 Radioactive Source No cooling Module position: -5:-30(bottom left)  10x    22   Wed May 7 17:33:21 2014 Benedikt Würkner Belle II source L3 module No 5 of 6 room temperature measurements using Sr90 Source (multi6) Sr90 Radioactive Source No cooling Module position: -32:-30(bottom center)  10x    23   Wed May 7 18:20:36 2014 Benedikt Würkner Belle II source L3 module No 6 of 6 room temperature measurements using Sr90 Source (multi6) Sr90 Radioactive Source No cooling Module position: -57:-30(bottom right)  10x    26   Thu May 8 16:51:03 2014 Benedikt Würkner Belle II source L3 module No 1 of 6 room temperature measurements using Sr90 Source (single) Sr90 Radioactive Source No cooling Module position: 0:0(top left)  10x    27   Thu May 8 16:51:57 2014 Benedikt Würkner Belle II source L3 module No 2 of 6 room temperature measurements using Sr90 Source (single) Failed with Error: "***ERROR*** Init NECO failed,  Return code: -32761" Restarted and it works again      28   Fri May 9 15:12:44 2014 Benedikt Würkner Belle II source L3 module No 2 of 6 room temperature measurements using Sr90 Source (single) Sr90 Radioactive Source No cooling Module position: -27:0(top center)  10x    29   Fri May 9 16:44:41 2014 Benedikt Würkner Belle II source L3 module No 3 of 6 room temperature measurements using Sr90 Source (single) Sr90 Radioactive Source No cooling Module position: -54:0(top center)  10x    30   Fri May 16 11:37:05 2014 Benedikt Würkner Belle II source L3 module No 4 of 6 room temperature measurements using Sr90 Source (single) Sr90 Radioactive Source No cooling Module position: 0:-10(bottom left)  10x    31   Fri May 16 11:38:44 2014 Benedikt Würkner Belle II source L3 module No 5 of 6 room temperature measurements using Sr90 Source (single) Sr90 Radioactive Source No cooling Module position: -27:-10(bottom center)  10x    32   Fri May 16 11:40:29 2014 Benedikt Würkner Belle II source L3 module No 6 of 6 room temperature measurements using Sr90 Source (single) Sr90 Radioactive Source No cooling Module position: -54:-10(bottom right)  10x    33   Thu Jun 5 10:33:46 2014 Benedikt Würkner Belle II source Silc Module Silc Angle Measurement 1° Measured the Silc 03/10 Module using the Sr90 Source to have a comparison for the Eta-Distribution at different angles.       34   Thu Jun 5 10:34:06 2014 Benedikt Würkner Belle II source Silc Module Silc Angle Measurement 4° Measured the Silc 03/10 Module using the Sr90 Source to have a comparison for the Eta-Distribution at different angles.       35   Thu Jun 5 10:34:29 2014 Benedikt Würkner Belle II source Silc Module Silc Angle Measurement 7° Measured the Silc 03/10 Module using the Sr90 Source to have a comparison for the Eta-Distribution at different angles.       36   Thu Jun 5 10:34:45 2014 Benedikt Würkner Belle II source Silc Module Silc Angle Measurement 10° Measured the Silc 03/10 Module using the Sr90 Source to have a comparison for the Eta-Distribution at different angles.

Goto page 1, 2, 3, 4

ELOG V3.1.5-fc6679b