| ID |
Date |
Author |
Project |
Subject |
Run Number |
Events |
StartTime |
EndTime |
Data |
Text |
 |
|
1
|
Fri Nov 14 19:01:27 2014 |
Thomas Bergauer | common | Administrative Procedures for Departure | | | | | Unknown | Wednesday:
* Transport request starten (I do
not need any transport service) von 887 nach |
|
|
3
|
Fri Nov 14 19:47:25 2014 |
Thomas Bergauer | | Telefonnummern | | | | | Unknown | * CCC (zentraler Beschleuniger-Kontrollraum):
77500
* H6A Controlroom: 76755 |
|
|
5
|
Fri Nov 14 19:52:12 2014 |
Thomas Bergauer | | important web pages | | | | | Unknown | SPS Accelerator status: http://op-webtools.web.cern.ch/op-webtools/vistar/vistars.php?usr=SPS1
general Information about the Beam |
|
|
6
|
Sat Nov 15 11:36:41 2014 |
Thomas Bergauer | common | Checklist for North Area access | | | | | Unknown |
|
|
|
7
|
Sat Nov 15 11:37:19 2014 |
Thomas Bergauer | AIDA | List of EUDET Telescope PCs in H6b | | | | | Unknown | https://twiki.cern.ch/twiki/bin/view/CLIC/ClicPixelDataTakingCERNPS2014 |
|
|
9
|
Sun Nov 16 14:22:51 2014 |
Thomas Bergauer | AIDA | PC Configuration EUDET Telescope in H6b | | | | | Unknown | PC (gehört AIDA) in H6b control room: ssh
telescope@ |
|
|
11
|
Mon Nov 17 19:23:57 2014 |
Thomas Bergauer | Infineon | PI XY table initial position | | | | | Unknown | initial position of Infineon Stack (PI
Micromove):
(guess center position by eye) |
|
|
29
|
Tue Nov 18 13:13:53 2014 |
Thomas Bergauer | Infineon | hardware run | infineon_run001 | 225508 | | | Unknown | Infineon new stack - batch 4
single hit
HV=300V,
total I = 4.2475 µA
strips |
|
|
2
|
Fri Nov 14 19:22:40 2014 |
Martin Kurz | common | ip addresses, portforwarding, wlan | | | | | Unknown | WLAN Router:
SSID:
Hephy
password: 20supersecret14 |
|
|
12
|
Mon Nov 17 22:03:02 2014 |
Martin Kurz | common | Drucker | | | | | Unknown | Drucken über den Printserver
(192.168.0.150):
|
|
|
53
|
Thu Nov 20 10:22:17 2014 |
Markus Friedl | Belle SVD | common | | | | | Unknown |
Some VME errors occured over
night
Optical fiber
changed
Situation |
|
|
92
|
Sat Nov 22 11:16:26 2014 |
Markus Friedl | Belle SVD | cooling | | | | | Unknown | Cooling box plant hung up (I2C error on
Alix, persistent after reboot)
Power-cycled cooling plant, now working |
|
|
109
|
Sun Nov 23 09:49:00 2014 |
Markus Friedl | Belle SVD | cooling | | | | | Unknown | Saturday evening, the cooling became unstable
which indicates the end of the CO2 supply,
possibly having a mixture of liquid and gas |
|
|
115
|
Sun Nov 23 15:07:54 2014 |
Markus Friedl | Belle SVD | common | | | | | Unknown | Geometry setup of FW/BW:
(all dimensions are in mm and refer
to the sensor planes) |
|
|
116
|
Sun Nov 23 15:09:53 2014 |
Markus Friedl | Belle SVD | PedestalRun | 001 | 10000 | | | Good | Initial pedestal run with SVD3 setup and
WedgeOld, FW993, BW993 (reading out 4 chips
on every p-side) |
|
|
117
|
Sun Nov 23 15:10:42 2014 |
Markus Friedl | Belle SVD | CalibrationRun | 001 | 83400 | | | Good | Initial calibration run with SVD3 setup
and WedgeOld, FW993, BW993 (reading out 4
chips on every p-side) |
|
|
118
|
Sun Nov 23 15:13:37 2014 |
Markus Friedl | Belle SVD | HardwareRun | 003 | 100600 | 23.11.2014 14:07:23 | 23.11.2014 16:51:27 | Good | Hardware run, hitting APVs 0/1 on p-sides,
1/2 on n-sides
EUDAT telescope running with difference |
|
|
119
|
Sun Nov 23 16:55:37 2014 |
Markus Friedl | Belle SVD | HardwareRun | 004 | 60600 | 23.11.2014 16:51:49 | 23.11.2014 18:23:54 | Good | Hardware run, hitting APVs 1/2 on p-sides,
1/2 on n-sides
EUDAT telescope running with difference |
|
|
121
|
Sun Nov 23 18:26:54 2014 |
Markus Friedl | Belle SVD | HardwareRun | 005 | 60600 | 23.11.2014 18:24:34 | 23.11.2014 | Good | Hardware run, hitting APVs 2/3 on p-sides,
1/2 on n-sides
EUDAT telescope running with difference |
|
|
10
|
Sun Nov 16 21:37:56 2014 |
Hao Yin | common | AIM | | | | | Unknown | fachi: aimhephy@antispam.e4ward.com
chrisu: gargamel0971
flo: flo.bux@sbg.at |
|
|
13
|
Mon Nov 17 22:18:27 2014 |
Hao Yin | Belle SVD | ADC delay scan | | | Mon Nov 17 22:08:29 | | Unknown | L3-p: 18
L4-p: 36
L5-p: 33 |
|
|
14
|
Mon Nov 17 22:21:41 2014 |
Hao Yin | | FIR run | 001 | | Mon Nov 17 22:08:29 CET 2014 | | Good | Excellent, brilliant run. |
|
|
15
|
Mon Nov 17 22:21:50 2014 |
Hao Yin | | Bad APVs | | | Mon Nov 17 22:08:29 CET 2014 | | Unknown | List with bad APVs:
|
|
|
16
|
Mon Nov 17 22:22:56 2014 |
Hao Yin | | PedestalRun_001 | 001 | 10000 | Mon Nov 17 22:22:41 CET 2014 | | Unknown | At room temperature.
|
|
|
17
|
Mon Nov 17 22:28:05 2014 |
Hao Yin | | CalibrationRun | 001 | | Mon Nov 17 22:27:07 CET 2014 | | Unknown | Noise file from run 001
PedestalRun_001
FIRRun_001 |
|
|
18
|
Mon Nov 17 22:28:07 2014 |
Hao Yin | | CalibrationRun | 001 | | Mon Nov 17 22:27:07 CET 2014 | | Unknown | Noise file from run 001
PedestalRun_001
FIRRun_001 |
|
|
19
|
Mon Nov 17 22:28:09 2014 |
Hao Yin | | CalibrationRun | 001 | | Mon Nov 17 22:27:07 CET 2014 | | Unknown | Noise file from run 001
PedestalRun_001
FIRRun_001 |
|
|
20
|
Mon Nov 17 23:04:57 2014 |
Hao Yin | Belle SVD | PedestalRun_002 | | 10338 | Mon Nov 17 23:03:03 CET 2014 | | Unknown | Pedestal run at room temperature.
6 subevents. Noise reference run.
Delay as latest run. |
|
|
21
|
Tue Nov 18 01:03:18 2014 |
Hao Yin | Belle SVD | Remapped FADC inputs | | | Tue Nov 18 01:03:32 CET 2014 | | Unknown | We moved the second cable to the third
connector on the FADC to match DESY testbeam
conditions. |
|
|
22
|
Tue Nov 18 01:05:04 2014 |
Hao Yin | Belle SVD | PedestalRun_003 | | | Tue Nov 18 01:03:32 CET 2014 | | Unknown | New pedestal run after switching the connectors.
At room temperature |
|
|
23
|
Tue Nov 18 09:45:59 2014 |
Hao Yin | | FIRRun_002 | 002 | | Tue Nov 18 09:45:58 CET 2014 | | Unknown | New FIR run after reconecting to original
setting. |
|
|
24
|
Tue Nov 18 09:48:53 2014 |
Hao Yin | Belle SVD | PedestalRun_004 | | 10000 | Tue Nov 18 09:48:30 CET 2014 | | Unknown | At room temperature.
Old delay settings and FIRRun_002
|
|
|
25
|
Tue Nov 18 09:51:11 2014 |
Hao Yin | | CalibrationRun_002 | | | Tue Nov 18 09:50:24 CET 2014 | | Unknown | At room temperature
PedestalRun004
Latest delay settings and FIRRun |
|
|
26
|
Tue Nov 18 10:12:25 2014 |
Hao Yin | Belle SVD | 6let PedestalRun_005 | | 10000 | Tue Nov 18 10:11:45 CET 2014 | | Unknown | At room temperature
Latest delay, FIRRun002.
Check for bad strips. |
|
|
27
|
Tue Nov 18 10:26:56 2014 |
Hao Yin | Belle SVD | CalibrationRun_003 | | | Tue Nov 18 10:26:52 CET 2014 | | Unknown | At room temperature
Latest delay and FIRRun |
|
|
32
|
Tue Nov 18 18:45:01 2014 |
Hao Yin | Belle SVD | Trigger Delay scan | | | Tue Nov 18 18:21:50 CET 2014 | | Unknown | At room temperature
First run was at: 23 (no track)
|
|
|
33
|
Tue Nov 18 20:26:12 2014 |
Hao Yin | Belle SVD | HardwareRun_001 | | | Tue Nov 18 18:21:50 CET 2014 | | Unknown | At room temperature
Latest ADC scan and FIR run.
Latest CAL. |
|
|
42
|
Wed Nov 19 20:04:53 2014 |
Hao Yin | Belle SVD | PedestalRun_006 | | | | | Unknown | Temperature: See attachment
FIRFilterRun_002
Layer 3-n side deactivated, because |
|
|
43
|
Wed Nov 19 20:07:05 2014 |
Hao Yin | Belle SVD | HardwareRun_002 | | | | | Unknown | Multi-6 cooled.
See latest Noise, and PedestalRun.
|
|
|
46
|
Wed Nov 19 22:25:29 2014 |
Hao Yin | Belle SVD | PedestalRun_008 [CheckLayout] | | | | | Unknown | cooled (temperature see attachment latest
noise run),
latest Noise, FIR settings with the |
|
|
47
|
Wed Nov 19 22:59:24 2014 |
Hao Yin | Belle SVD | CalibrationRun_004 | | | | | Crap | cooled (see last calibration run)
Latest noise, FIRfilter settings.
|
|
|
48
|
Wed Nov 19 23:15:50 2014 |
Hao Yin | Belle SVD | HardwareRun_003 | | | | | Unknown | cooled, latest noise, cal, PedestalRun.
Rawmode |
|
|
49
|
Wed Nov 19 23:31:08 2014 |
Hao Yin | Belle SVD | HardwareRun_004 | | | | | Unknown | Same as HardwareRun_003 but with ZS. |
|
|
50
|
Thu Nov 20 00:52:50 2014 |
Hao Yin | Belle SVD | FIRRun_002 | | | | | Unknown | cooled with new delay run |
|
|
51
|
Thu Nov 20 00:54:21 2014 |
Hao Yin | Belle SVD | PedestalRun_008 | | | | | Unknown | temp see attachment (von flo)
10000
latest fir filter (002) |
|
|
52
|
Thu Nov 20 00:55:14 2014 |
Hao Yin | Belle SVD | HardwareRun_007 | | | | | Unknown | temp cooled see attachment
last noise run(007)
FIRRun_002 |
|
|
58
|
Thu Nov 20 11:13:44 2014 |
Hao Yin | | HardwareRun_008 | 008 | | | | Crap | cooled see attachment in FIRRun_003
PedestalRun_009
CalibrationRun_005 |
|
|
60
|
Thu Nov 20 15:32:33 2014 |
Hao Yin | | HardwareRun | 010 | | | | Crap | same as hardware run 009
FIFO FULL ERROR starting at ~event
5000 |
|
|
63
|
Thu Nov 20 16:13:18 2014 |
Hao Yin | Belle SVD | HardwareRun | 011 | | | | Crap | cooled see appendix (FirRun003)
PedestalRun_009
multi 6 Raw Mode |
|
|
66
|
Thu Nov 20 22:11:06 2014 |
Hao Yin | Belle SVD | HardwareRun | 012 | | | | Good | cooled see appendix (FirRun003)
PedestalRun_009
multi 6 Raw Mode |
|
|
80
|
Fri Nov 21 19:05:27 2014 |
Hao Yin | Belle SVD | FIRRun_004 | | | Fri Nov 21 19:05:23 CET 2014 | | Unknown | New ADC delay scan. cooled, -25 temperature
|
|
|
81
|
Fri Nov 21 19:10:09 2014 |
Hao Yin | Belle SVD | CalibrationRun_006 | | | | | Unknown | cooled, latest ADC delay scan and FIRRun. |
|
|
83
|
Fri Nov 21 19:42:36 2014 |
Hao Yin | | HardwareRun_033 | | | | | Good | L6 are swapped, needs to be corrected later
in the offline analysis.
cooled at -25 |
|
|
84
|
Fri Nov 21 22:08:32 2014 |
Hao Yin | | PedestalRun | 013 | 10000 | | | Unknown | correct mapping
cooled -25 °C
L3n deactivated |
|
|
94
|
Sat Nov 22 15:31:49 2014 |
Hao Yin | Belle SVD | HardwareRun | 038 | 43788 | 2014-11-22 15:18:40 | | Unknown | Cooled down to -20
Bias voltage set to +-60V
Pedestal_013 (cooled) |
|
|
105
|
Sun Nov 23 01:05:43 2014 |
Hao Yin | Belle SVD | HardwareRun | 039 | 20000 | 2014-11-22 15:18:40 | | Crap | Cooled down to -20
Bias voltage set to +-80V
Pedestal_013 (cooled) |
|
|
106
|
Sun Nov 23 01:37:42 2014 |
Hao Yin | Belle SVD | HardwareRun | 040 | 20000 | 2014-11-23 01:37:00 | | Unknown | Bias voltage set to +-80V
Pedestal_015 (cooled)
p, li { |
|
|
110
|
Sun Nov 23 10:32:41 2014 |
Hao Yin | Belle SVD | PedestalRun | 016 | 10000 | | | Unknown | Pedestal Run
room temperature (30C)
Bias scans planned |
|
|
111
|
Sun Nov 23 10:51:49 2014 |
Hao Yin | Belle SVD | HardwareRun | 042 | 76863 | | | Unknown | Hardware Run +-40V Bias
Room Temperature
Pedestal 016 |
|
|
4
|
Fri Nov 14 19:49:04 2014 |
Florian Buchsteiner | common | Belle Setup | | | | | Unknown | |
|
|
8
|
Sat Nov 15 12:41:50 2014 |
Benedikt Würkner | Belle SVD | Discoveries during preliminary sensor tests | | | | | Unknown | L5_p_side APV #3 faulty signal
L4_n_side APV #2 and #3 faulty signal |
|
|
35
|
Tue Nov 18 20:42:18 2014 |
Benedikt Würkner | Belle SVD | Coordinates of the DUT | | | | | Unknown | We set the coordinates trying to put the
beam in an area with well working APVs
Peak of course differs for n and |
|
|
54
|
Thu Nov 20 10:33:13 2014 |
Benedikt Würkner | Belle SVD | FIRRun and Delay Scan | 003 | | | | Unknown | Cooled see appendix
with new layout (l3_n-side channels
changed and reactivated). |
|
|
55
|
Thu Nov 20 10:39:11 2014 |
Benedikt Würkner | Belle SVD | PedestalRun_009 | | | | | Unknown | cooled see appendix (FIRRun003)
MaxEvents 10000
|
|
|
56
|
Thu Nov 20 10:39:13 2014 |
Benedikt Würkner | Belle SVD | PedestalRun_009 | | | | | Unknown | cooled see appendix (FIRRun003)
MaxEvents 10000
|
|
|
57
|
Thu Nov 20 10:41:54 2014 |
Benedikt Würkner | Belle SVD | CalibrationRun_005 | | | | | Unknown | cooled see appendix (FIRRun_003)
PedestalRun_009 |
|
|
59
|
Thu Nov 20 11:14:19 2014 |
Benedikt Würkner | | HardwareRun_009 | 009 | | | | Crap | cooling see attachment of FIRRun003
Ped 009
Cal 005 |
|
|
71
|
Fri Nov 21 15:02:28 2014 |
Benedikt Würkner | Belle SVD | HardwareRun | 013 | 1433 | | | Unknown | cooled see appendix (FirRun003)
PedestalRun_010
multi 6 Raw Mode |
|
|
72
|
Fri Nov 21 15:03:08 2014 |
Benedikt Würkner | Belle SVD | HardwareRun | 014 | 989 | | | Unknown | cooled see appendix (FirRun003)
PedestalRun_010
multi 6 Raw Mode |
|
|
73
|
Fri Nov 21 15:07:24 2014 |
Benedikt Würkner | Belle SVD | HardwareRun | 019 | 150948 | 2014-11-21 02:41:55 | 2014-11-21 10:11:02 | Unknown | cooled see appendix (FirRun003)
PedestalRun_010
multi 6 Raw Mode |
|
|
74
|
Fri Nov 21 15:10:19 2014 |
Benedikt Würkner | | HardwareRun | 15-22 (exept 19) | none | | | Crap | |
|
|
93
|
Sat Nov 22 11:37:16 2014 |
Benedikt Würkner | Belle SVD | HardwareRun | 036 | 450378 | 2014-11-22 1:00:00 | 2014-11-22 10:27:54 | Unknown | Not completely cooled since cooling
failed at 1:42 in the night
Bias voltage set to +-60V |
|
|
112
|
Sun Nov 23 12:17:59 2014 |
Benedikt Würkner | Belle SVD | HardwareRun | 044 | 20000 | | | Unknown | Hardware Run +-30V Bias
Room Temperature
Pedestal 017 (again marked all the |
|
|
114
|
Sun Nov 23 12:55:47 2014 |
Benedikt Würkner | Belle SVD | HardwareRun | 045 | 20000 | | | Unknown | Hardware Run +-50V Bias
Room Temperature
Pedestal 018 (again marked all the |
|
120
|
Sun Nov 23 17:51:44 2014 |
Benedikt Würkner | Belle SVD | HardwareRun | 046 | 100000 | 20:06 | 20:36 | Unknown | Hardware Run +-60V Bias
Room Temperature
Pedestal 018 (again marked all the |
|
|
28
|
Tue Nov 18 12:35:32 2014 |
Axel König | common | Infineon (4 modules) TLU Settings | | | | | Unknown |
VNC
to 192.168.0.18
|
|
|
30
|
Tue Nov 18 18:29:55 2014 |
Axel König | Infineon | calibration run | Infineon_run002 | | | | Unknown | Infineon_run002 is just a calibration run
for the vertical positioned sensors.
|
|
|
31
|
Tue Nov 18 18:33:31 2014 |
Axel König | Infineon | hardware run | Infineon_run003 | 300000 | | | Unknown | Infineon new stack - batch 4
single hit
HV=300V, total I = 4.0044 µA |
|
|
36
|
Tue Nov 18 23:04:34 2014 |
Axel König | Infineon | hardware run | Infineon_run004 | 400000 | | | Unknown | Infineon new stack - batch 4
single hit
HV=300V,
total I = 4.0044 µA
strips |
|
|
37
|
Wed Nov 19 00:58:27 2014 |
Axel König | Infineon | hardware run | Infineon_run005 | 87000 | | | Unknown | Infineon
new stack - batch 4
|
|
|
38
|
Wed Nov 19 09:26:39 2014 |
Axel König | Infineon | hardware run | Infineon_run006 | 1500 | | | Unknown | Infineon new stack - batch 4
|
|
|
39
|
Wed Nov 19 16:24:25 2014 |
Axel König | common | Running EUDAQ | | | | | Unknown | Windows PC at Telescope:
0.) JTAG Programming:
Chose a threshold file (recommended threshold |
|
|
40
|
Wed Nov 19 18:20:29 2014 |
Axel König | Infineon | calibration run | Infineon_run007_cal | | | | Unknown | |
|
|
44
|
Wed Nov 19 21:56:44 2014 |
Axel König | Infineon | hardware run | Infineon_run008 | 244167 | | | Unknown | Infineon
new stack - batch 4 |
|
|
45
|
Wed Nov 19 22:15:41 2014 |
Axel König | Infineon | hardware run | Infineon_run010 | 1498709 | | | Unknown | Infineon new stack - batch 4
single hit
HV=300V,
total I = 4.0200 µA
strips |
|
|
61
|
Thu Nov 20 15:46:21 2014 |
Axel König | Infineon | hardware run | Infineon_run012 | 263470 | | | Unknown | Infineon new stack - batch 4
|
|
|
62
|
Thu Nov 20 15:47:56 2014 |
Axel König | Infineon | hardware run | Infineon_run011 | | | | Unknown | Infineon new stack -
batch 4 |
|
|
64
|
Thu Nov 20 17:16:56 2014 |
Axel König | common | how to run the EUDAQ offline monitor | | | | | Unknown | YOU need
1.) Folder EUDAQ OFFLINE Monitor
2.) ROOT |
|
|
65
|
Thu Nov 20 18:15:48 2014 |
Axel König | Infineon | hardware run | Infineon_run013_voltage | 51273 | | | Unknown | Infineon new stack - batch 4
|
|
|
67
|
Thu Nov 20 22:12:21 2014 |
Axel König | common | SPS Logbook / SPS Online Monitor | | | | | Unknown | Logbook: https://ab-dep-op-elogbook.web.cern.ch/ab-dep-op-elogbook/elogbook/secure/eLogbook.php?shiftId=1059325
Monitor: http://op-webtools.web.cern.ch/op-webtools/vistar/vistars.php?usr=SPS1 |
|
|
68
|
Fri Nov 21 01:43:54 2014 |
Axel König | AIDA | calibration run | AIDA_run001_calibration | | | | Unknown | Calibration run with AIDA DUT.
Single hit |
|
|
69
|
Fri Nov 21 11:10:08 2014 |
Axel König | AIDA | hardware run | AIDA_run002 | 211362 | | | Unknown | AIDA
multi hit
Voltage=100V,
I=4.1688uA
(new table calibration): |
|
|
70
|
Fri Nov 21 12:14:46 2014 |
Axel König | AIDA | hardware run | AIDA_run003 | 20617 | | | Unknown | AIDA
single hit |
|
|
75
|
Fri Nov 21 15:37:30 2014 |
Axel König | AIDA | hardware run | AIDA_run004 | 7057 | | | Unknown | AIDA
|
|
|
76
|
Fri Nov 21 18:20:47 2014 |
Axel König | AIDA | hardware run | AIDA_run005 | 20045 | | | Unknown | AIDA
single hit |
|
|
77
|
Fri Nov 21 18:21:45 2014 |
Axel König | AIDA | hardware run | AIDA_run006 | ~1k | | | Unknown | verwerfen! |
|
|
78
|
Fri Nov 21 18:23:05 2014 |
Axel König | common | New Table Calibration | | | | | Unknown | Nach powercut musste der Tisch neu
kalibriert werden. Diese Neukalibration betrifft
alle Messungen ab den ersten Messungen vom |
|
|
79
|
Fri Nov 21 18:35:17 2014 |
Axel König | AIDA | Important: Dockbox Inverter! | | | | | Unknown | Alle AIDA runs vor run_007 hatten kein
Signal auf den Sensoren 5 und 6.
Grund: Inverter auf N Seite war im |
|
|
82
|
Fri Nov 21 19:25:57 2014 |
Axel König | AIDA | hardware run | AIDA_run007 | 26770 | | | Unknown | AIDA
|
|
|
85
|
Fri Nov 21 23:33:54 2014 |
Axel König | AIDA | hardware run (PC crashed) | AIDA_run008 | --- | | | Unknown | 22:00 SVD3 PC crashed!!! data will be collected. |
|
|
86
|
Fri Nov 21 23:34:36 2014 |
Axel König | AIDA | hardware run | AIDA_run009 | 32902 | | | Unknown |
|
|
|
87
|
Fri Nov 21 23:40:10 2014 |
Axel König | AIDA | hardware run | AIDA_run010 | 26329 | | | Unknown |
|
|
|
88
|
Sat Nov 22 00:11:36 2014 |
Axel König | AIDA | hardware run | AIDA_run011 | 24916 | | | Unknown | AIDA
|
|
|
89
|
Sat Nov 22 00:58:04 2014 |
Axel König | AIDA | hardware run | AIDA_run012 | 276006 | | | Unknown | AIDA |
|
|
90
|
Sat Nov 22 07:56:33 2014 |
Axel König | AIDA | hardware run | AIDA_run013 | 55629 | | | Unknown |
|
|
|
91
|
Sat Nov 22 10:20:07 2014 |
Axel König | AIDA | calibration run | AIDA_calibration | | | | Unknown | Calibration run AIDA_calibration
L:\cern14\AIDA |
|
|
95
|
Sat Nov 22 16:04:05 2014 |
Axel König | Infineon | Infineon old calibration | Infineon_old_calibration | | | | Unknown | Calibration run
L:\cern14\infineon_old |
|
|
96
|
Sat Nov 22 16:43:18 2014 |
Axel König | common | table, telescope and dut geometry | | | | | Unknown | geometry files |
|
|
97
|
Sat Nov 22 16:53:39 2014 |
Axel König | Infineon | Infineon old | Infineon_old_run001 | 55000 | | | Unknown | Infineon old
multi |
|
|
98
|
Sat Nov 22 17:00:43 2014 |
Axel König | Infineon | Infineon old | damaged strixel sensors, strange IV behaviour | | | | Unknown | 1.) No events recorded for strixel sensors
(run001). They seem to be damaged like they
were at DESY. |
|
|
99
|
Sat Nov 22 18:08:03 2014 |
Axel König | Infineon | hardware run | Infineon_old_run002 | 55000 | | | Unknown | Infineon old
|
|
|
100
|
Sat Nov 22 19:29:40 2014 |
Axel König | AIDA | DUT Position | | | | | Unknown | |
|
|
101
|
Sun Nov 23 00:20:41 2014 |
Axel König | Infineon | hardware run | Infineon_old_run003 | 30000 | | | Unknown | Infineon old
multi hit
Voltage=300V, I=10.9797uA |
|
|
102
|
Sun Nov 23 00:24:15 2014 |
Axel König | Infineon | hardware run | Infineon_old_run004 | 168725 | | | Unknown | Infineon
old
multi |
|
|
103
|
Sun Nov 23 00:51:07 2014 |
Axel König | Infineon | hardware run | Infineon_old_run005 | 26569 | | | Unknown |
|
|
|
107
|
Sun Nov 23 09:32:48 2014 |
Axel König | Infineon | hardware run | Infineon_old_run007 | 63913 | | | Unknown | Infineon
old |
|
|
108
|
Sun Nov 23 09:36:27 2014 |
Axel König | Infineon | hardware run | Infineon_old_run006 | 526562 | | | Unknown | Infineon
old |
|
|
113
|
Sun Nov 23 12:39:45 2014 |
Axel König | common | PMT's of EUDET (Igor Rubinsky) | | | | | Unknown | Der zweite PM (entsprechend der Beamrichtung)
war von Anfang an nicht angeschlossen an
die TLU! Stattdessen war ein Atlas pixel |
|