ID |
Date |
Author |
Project |
Subject |
Run Number |
Events |
StartTime |
EndTime |
Text |
|
147
|
Thu May 19 11:02:08 2011 |
Manfred Valentan | Micron Baby | DUT4, source run, irrad, postzupf | cal119 | 83800 | 19.05.2011 09:57:57 | 19.05.2011 10:06:06 | DUT4: B2Micron_2826_19_baby4 (combined
p-stop)
config file: D:/cern10/micronbaby/data_lab/DUT4/postzupf/micronbaby_single_irrad_postzupf.cfg |
|
148
|
Thu May 19 11:04:04 2011 |
Manfred Valentan | Micron Baby | DUT4, source run, irrad, postzupf | run119 | 100k | 19.05.2011 10:08:14 | 19.05.2011 10:29:02 | DUT4: B2Micron_2826_19_baby4 (combined
p-stop)
config file: D:/cern10/micronbaby/data_lab/DUT4/postzupf/micronbaby_multi6_irrad_postzupf.cfg |
6x |
149
|
Thu May 19 11:06:41 2011 |
Manfred Valentan | Micron Baby | DUT4, source run, irrad, prezupf | run114 | 100k | 18.05.2011 11:57:13 | 18.05.2011 12:13:12 | DUT4: B2Micron_2826_19_baby4 (combined
p-stop)
config file: D:/cern10/micronbaby/data_lab/DUT4/prezupf/micronbaby_multi6_irrad.cfg |
|
1
|
Wed Sep 15 10:25:13 2010 |
Marko Dragicevic | common | Equipment List | | | | | [B]Slow Control:[/B]
3x Source Measurement Unit Keithley K2410
-- Inv.Nr.: 540-702, 1000EUR
|
|
64
|
Sun Oct 3 14:35:12 2010 |
Marko Dragicevic | CNM | cal | cal009 | 83800 | 03.10.2010 13:50:54 | | CMN-SILC stack
HV_SILC (Katze)=75V, 0.25uA (6 SiLC)
HV_CNM (Keithley)=30V, CNM_1=84nA, |
|
73
|
Mon Oct 4 10:43:45 2010 |
Marko Dragicevic | Pt | run | run036 | 25600 | 04.10.2010 10:33:05 | 04.10.2010 11:35:51 | Pt modules, angle scan
h01-Pt and h02-Pt
currents: h01=24.9A h02=12.5A |
|
89
|
Wed Oct 6 10:15:26 2010 |
Marko Dragicevic | Micron Baby | XY Positions After Irradiation | | | | | center position: 119/50/(7.5)
top left (direction jura, bottom
right on sensor): 127/56.5/7.5 |
|
90
|
Wed Oct 6 11:03:59 2010 |
Marko Dragicevic | Micron Baby | cal | cal013 | 83800 | 06.10.2010 11:03:12 | | 8 x Micron Baby (3 irradiated), no cooling
HV=100V I=115uA (start of run)
beam off |
|
94
|
Wed Oct 6 23:02:09 2010 |
Marko Dragicevic | common | Beam Configuration | | | | | Beam Settings and Profile on 5.10.2010
- 17:00h
Saved as: H6B.801 |
|
95
|
Wed Oct 6 23:03:15 2010 |
Marko Dragicevic | BELLE | cal | cal014 | 83800 | 06.10.2010 23:01:56 | 06.10.2010 23:34:07 | Belle stack without Origami2
HV=80V I=227uA
beam on |
|
17
|
Tue Sep 28 01:13:57 2010 |
Markus Friedl | BELLE | cal | cal001 | 83800 | 28.09.2010 01:11:20 | | first intcal with complete Belle stack:
2 x Origami, 2 x Micron
HV=100V I=49uA |
|
18
|
Tue Sep 28 03:06:31 2010 |
Markus Friedl | BELLE | run | run001 | 119516 | 28.09.2010 03:06:04 | 28.09.2010 12:18:33 | first run with complete Belle stack: 2
x Origami, 2 x Micron
HV=100V I=49uA |
|
19
|
Tue Sep 28 12:54:33 2010 |
Markus Friedl | BELLE | run | run002 | | 28.09.2010 12:46:54 | | same as run001 after shifting x by 48mm
103 / 30 / 277.5 ? unsure after crash
of xy stage PC |
|
20
|
Tue Sep 28 13:04:02 2010 |
Markus Friedl | BELLE | run | run003 | 25000 | 28.09.2010 13:00:05 | 28.09.2010 14:41:14 | now for real (previous run was at wrong
position)
all same as run001, except position |
|
22
|
Tue Sep 28 14:48:00 2010 |
Markus Friedl | BELLE | run | run004 | 1755 | 28.09.2010 14:48:28 | 28.09.2010 15:06:31 | same as before, but now pos 1 is located
on the other edge (-48mm from center)
telescope 7 / 30 / 277.5 |
|
23
|
Tue Sep 28 15:09:16 2010 |
Markus Friedl | BELLE | run | run005 | 40000 | 28.09.2010 15:07:08 | 28.09.2010 20:20:12 | previous run stopped due to beam problem
(shifted, broad, etc).
now recovered, restarting with same |
|
25
|
Tue Sep 28 22:07:16 2010 |
Markus Friedl | BELLE | cal | cal002 DO NOT USE -> go to cal003 | 83800 | 28.09.2010 22:01:55 | | Belle stack (Origami, Micron, Micron, Origami)
now cooling only for Origami, Micron
are uncooled |
|
26
|
Tue Sep 28 22:09:39 2010 |
Markus Friedl | BELLE | Temperature sensors Belle stack | | | | | PicoLogic TC-08 temperature sensor assignment
Belle stack:
Sensor type: K |
|
27
|
Tue Sep 28 23:23:47 2010 |
Markus Friedl | BELLE | run | run006 | 2003 | 28.09.2010 23:13:22 | 28.09.2010 23:22:26 | channels swapped -> stopped |
|
28
|
Tue Sep 28 23:24:35 2010 |
Markus Friedl | BELLE | run | run007 | 1460 | 28.09.2010 23:23:29 | 28.09.2010 23:27:54 | Belle stack: Origami-Micron-Micron-Origami
HV=100V, Ibias=38A, beam on
cooling: Origami only, chiller: -25C, |
|