| ID |
Date |
Author |
Project |
Subject |
Run Number |
Events |
StartTime |
EndTime |
Data |
Text |
 |
|
98
|
Wed Jan 29 22:40:09 2014 |
Wolfgang Treberspurg | Infineon | Single mode Run Stack 2 Bias Scan | HW_Run_Infineon_Stack2_pos2_002 | 200k | 29.01.2014 22:40 | 29.01.2014 23:15 | Good | HV at 300V; I at app. 7.5µA 3GeV,
Single mode
Position changed to --8.91097 -22.80061 |
|
|
74
|
Sat Jan 25 18:24:03 2014 |
Wolfgang Treberspurg | Infineon | Single mode Run Stack 2 | HW_Run_Infineon_Stack2_001 | 1.05 M | 25.01.2014 10:30 | 25.01.2014 15:40 | Unknown | HV at 300V; I at app. 11µA 4GeV,
Single mode
Modules centered to beam but no hits |
|
|
78
|
Sun Jan 26 19:12:42 2014 |
Wolfgang Treberspurg | Infineon | Single mode Run Stack 2 | HW_Run_Infineon_Stack2_002 | 4 M | 25.01.2014 22:30 | 26.01.2014 15:15 | Good | HV at 300V; I at app. 11µA 4GeV,
Single mode
|
|
|
79
|
Sun Jan 26 19:14:07 2014 |
Wolfgang Treberspurg | Infineon | Single mode Run Stack 2 | HW_Run_Infineon_Stack2_003 | 140 k | 26.01.2014 18:10 | 26.01.2014 19:15 | Good | HV at 300V; I at app. 10µA 5GeV,
Single mode
|
|
|
80
|
Mon Jan 27 12:20:53 2014 |
Wolfgang Treberspurg | Infineon | Single mode Run Stack 2 | HW_Run_Infineon_Stack2_004 | 800k | 27.01.2014 09:10 | 27.01.2014 12:15 | Good | HV at 300V; I at app. 10µA 3GeV,
Single mode
|
|
|
59
|
Fri Jan 10 11:02:31 2014 |
Markus Friedl | Belle SVD | Power supply | | | 10.01.2014 11:00:00 | | Unknown | |
|
|
73
|
Fri Jan 24 18:02:46 2014 |
Wolfgang Treberspurg | Infineon | New Infineon Stack | | | | | Good | Exchanged AIDA stack with modified Infineon
Stack
Configuration: |
|
|
76
|
Sat Jan 25 18:46:32 2014 |
Wolfgang Treberspurg | Infineon | Mulit 6 mode Run Stack 2 | HW_Run_Infineon_Stack2_Multi_001 | 340k | 25.01.2014 16:30 | 25.01.2014 18:40 | Unknown | HV 300V, I 10µA
Beam Energy changed during the run
between 2GeV - 5GeV - 4GeV |
|
|
77
|
Sat Jan 25 21:14:46 2014 |
Wolfgang Treberspurg | Infineon | Mulit 6 mode Run Stack 2 | HW_Run_Infineon_Stack2_Multi_002 | 230k | 25.01.2014 19:00 | 25.01.2014 21:15 | Good | HV 300V, I 10µA
Beam Energy 4GeV
Latency changed to 93 |
|
|
67
|
Mon Jan 13 12:02:40 2014 |
Markus Friedl | common | Kontakt | | | | | Unknown | Richard Thalmeier Tel. 4801
Hao Yin |
|
|
75
|
Sat Jan 25 18:28:38 2014 |
Wolfgang Treberspurg | Infineon | Calibration run Infineon Stack 2 | Calibration_Run_Infineon_Stack2_001 | 82900 | 25.01.2014 10:15 | 25.01.2014 10:25 | Unknown | HV 300V, I ca. 11µA single mode |
|
|
7
|
Mon Jan 6 19:10:36 2014 |
Thomas Bergauer | common | Beam Momentum 3GeV/c | run001 to run012 | | | | Unknown | We have set the beam momentum to 3 GeV |
|
|
68
|
Sun Jan 19 18:01:46 2014 |
Christian Irmler | common | AIDA setup operated with TuxDAQ | | | | | Unknown | New SIS driver version sis1100-2.13-3 installed
on DAQPC.
To install the driver call as root: |
|
|
69
|
Thu Jan 23 22:47:49 2014 |
Hao Yin | | AIDA | CalibrationRun001 | 83800 | 23.01.2014 13:35:55 | 23.01.2014 02:08:15 | Good | taken with tuxdaq...
HV=75V I=?3.7uA?
position = 0 / -30 mm relative to |
|
|
70
|
Fri Jan 24 00:21:16 2014 |
Hao Yin | | AIDA | HW_AIDA001 | 40k | 24.02.2014 00:18 | | Unknown | HV=100V I=3.7uA
position = 0 / -30 mm relative to
initial (but again centered) no idea --- |
|
|
71
|
Fri Jan 24 11:03:14 2014 |
Wolfgang Treberspurg | AIDA | AIDA | HW_AIDA002 | 0 | 24.01.2014 10:02 | | Crap | TuxDaq crashed |
|
|
72
|
Fri Jan 24 11:23:15 2014 |
Hao Yin | | AIDA | HW_AIDA003 | 76356 | 24.02.2014 10:30 | 24.02.2014 11:22 | Unknown | HV=100V I=3.7uA
position = 0 / -30 mm relative to
initial (but again centered) no idea --- |
|