first fir filter run:
# 1:[0x[FADC ID] in hex], 2:[APV25 ChannelNr], 3-10:[fir coef in float]
0x1,0,1.13520608876,-0.0660414994664,-0.0344046528212,-0.0160940592489,-0.0188049576486,-0.00405635272718,0.0022422085805,0.0019532245698
0x1,1,1.12295253975,-0.0592944656544,-0.0336020250522,-0.00917724891395,-0.0223869593454,-0.001090399382,0.00157177453262,0.00102678406945
0x1,2,1.10960105507,-0.0491151980644,-0.0216084507671,-0.0232756364146,-0.0192721778229,4.93000093422e-05,0.00212840263425,0.00149270535105
0x1,3,1.11519364558,-0.0493775479933,-0.0376704950557,-0.0146504253798,-0.0165884582123,-0.000600824253816,0.00322162604136,0.000472479268962
0x1,4,1.13426016899,-0.0667854171497,-0.0264286139713,-0.0197774154583,-0.0170046741967,-0.00226419416266,6.20867200564e-06,-0.00200606272088
0x1,6,1.09850375545,-0.0475251007723,-0.0321323204114,-0.0049982962069,-0.0154525510063,-0.00712038830107,0.00765760772637,0.00106729351877
0x1,7,1.10490718424,-0.0580918106828,-0.0189135662712,-0.0225866865555,-0.00706610584315,-0.00210905052809,0.00213700433548,0.00172303130321
0x1,8,1.11845599607,-0.0562756903334,-0.0272202891264,-0.0192283627542,-0.0141171590415,-0.00540422529399,0.00284726648764,0.000942463991129
0x1,9,1.13075955486,-0.066498502226,-0.0225582412623,-0.0174951308602,-0.0223318702725,-0.00471388605456,0.00124707622294,0.00159099959515
0x1,10,1.13973122772,-0.066071722433,-0.0240532798656,-0.0291078118432,-0.0202488190761,-0.00424019931205,0.00244145856313,0.00154914624533
0x1,11,1.15204186506,-0.0967928207722,-0.0308635609727,-0.0115580342947,-0.0118777292178,-0.00266593668058,-0.000429035282974,0.00214525215939
0x1,12,1.11062672911,-0.066120693735,-0.0168494684576,-0.0180340737077,-0.012168747551,-0.0017189363387,0.00238902556317,0.0018761651176
0x1,13,1.12123438424,-0.0670926333638,-0.0225282450919,-0.00610731605417,-0.0237712056312,-0.00507131011027,0.00341396795771,-7.76419501721e-05
0x1,14,1.09212680318,-0.0526830770541,-0.015524774204,-0.00886886801082,-0.0174855732906,-0.00167161734671,0.00261972950703,0.00148737721598
0x1,15,1.10446592929,-0.0478821284168,-0.0217508141036,-0.0146475583237,-0.0180290216155,-0.00389357225933,0.00205683237477,-0.000319666947371
0x1,16,1.12307725483,-0.0641235921299,-0.0276059676118,-0.0121047284408,-0.0214462734311,-0.00147871495864,0.00364815395595,3.38677884642e-05
0x1,17,1.1078157527,-0.0553763881527,-0.0255148556727,-0.00949270467278,-0.019304208005,-0.00125438962752,0.00210848765373,0.00101830578048
0x1,18,1.10668859528,-0.0580021816733,-0.0203264578138,-0.0153159545078,-0.0141748321542,-0.00187318995441,0.00352377559548,-0.000519754771162
0x1,19,1.10967649916,-0.066889747293,-0.00558505164567,-0.0269402450119,-0.0134795008908,0.00010776519614,0.00254658966222,0.000563690825961
0x1,20,1.11395145106,-0.0601557674242,-0.0298254264592,-0.00347766182254,-0.0223889139775,0.000710017854686,0.0016453764566,-0.000459075685311
0x1,21,1.10090162739,-0.041185875479,-0.0195061953598,-0.0293163002613,-0.0123034799744,-0.00084231769215,0.00100845261681,0.00124408876139
0x1,22,1.11964816009,-0.0658594545538,-0.0331572127768,-0.00756629965084,-0.011254866642,-0.00422818555679,0.00100618460285,0.00141167448927
0x1,23,1.10989860302,-0.0627755158227,-0.0156813522536,-0.0209003697758,-0.0123571300411,-0.00074226793831,0.001633396925,0.000924635884661
0x1,36,1.20303564748,-0.155850891914,-0.0145930147946,-0.0215171487752,-0.0142425044937,-0.00141639459333,0.000436750590692,0.00414755650155
0x1,37,1.16401336407,-0.10146271483,-0.0243067046593,-0.017209961903,-0.0252808382812,-0.00112564187466,0.00254240666672,0.0028300908075
0x1,38,1.15047541013,-0.104302355887,-0.0106342282626,-0.031015587005,-0.0172655310607,0.00666189117189,0.0025094241298,0.00357097678602
0x1,40,1.17667578085,-0.13880708599,-0.0268644708874,-0.0200113699618,-0.00606000452395,0.00724205443689,0.00438917698701,0.00343591908584
0x1,41,1.02701567338,0.011498360508,-0.0398757680676,-0.00245389652267,-0.0139465091027,0.00240398424895,0.0117191753237,0.00363898023083
0x1,42,1.12396724545,-0.0685566349941,-0.0283538781767,-0.0179360377423,-0.00814272036001,-0.00451334706977,0.0039761075112,-0.000440734622417
0x1,43,1.13227200482,-0.0728818783682,-0.015551624631,-0.0247075704334,-0.01493993764,-0.00891590754235,0.00389181151236,0.000833102282119
0x1,44,1.16894293102,-0.112860085149,-0.0214150870499,-0.0224706095311,-0.0134931583984,-0.00276361904314,0.00265016997345,0.00140945817888
0x1,45,1.10753801191,-0.0444487974221,-0.0256609290791,-0.0231214149431,-0.0151286303192,-0.00249036365029,0.00203916964606,0.00127295385451
0x1,46,1.11346039175,-0.0558804282008,-0.0346834704793,-0.00155148900517,-0.0207626070206,-0.00407948270778,0.00318528021394,0.000311805446446
0x1,47,1.10514430327,-0.0655722830244,-0.0123202218946,-0.0157385967817,-0.0110582401612,-0.00125154790562,-0.00302521550973,0.00382180200598
0x81,0,1.1346419846,-0.0737396468063,-0.0322354628053,-0.0152256065858,-0.00484040764213,-0.0171661306843,0.00516194347229,0.00340332644827
0x81,1,1.13877781968,-0.0735528369577,-0.0175602043517,-0.0329985577567,-0.0160936758009,-0.00271254955069,0.00194176796253,0.00219823677648
0x81,2,1.13854804792,-0.0629129015173,-0.0287888426751,-0.0300600003103,-0.0111792687179,-0.0104427262825,0.00251849591767,0.0023171956695
0x81,3,1.1371275087,-0.0866470643512,-0.0053452287457,-0.0346178157976,-0.017845130908,0.00861643890645,-0.00373697696356,0.00244826915852
0x81,6,1.12636316339,-0.0739611957149,-0.00499735606095,-0.0294210089113,-0.0183894157148,-0.00686916354284,0.0046199231595,0.00265505339344
0x81,7,1.13080005921,-0.0568637860737,-0.0360729388839,-0.0149346909531,-0.0120237900808,-0.0149438513755,0.00179073710334,0.002248261052
0x81,8,1.14057682695,-0.0748092570289,-0.0164236225694,-0.0284950881231,-0.02211361223,-0.0023069962108,0.00162330533578,0.0019484438737
0x81,9,1.13231031612,-0.049591511103,-0.0561986120336,-0.0132431189526,-0.00726346456214,-0.00964690537993,0.00140082973596,0.00223246617691
0x81,12,1.12569399018,-0.0547083884589,-0.0366409862547,-0.000452877499146,-0.0261220961438,-0.0119500069173,0.00228538481423,0.00189498028266
0x81,13,1.14073390895,-0.047420739531,-0.045962865521,-0.0294163946381,-0.00471168750835,-0.0159507549081,0.00124182373377,0.00148670941996
0x81,14,1.12876267785,-0.0485328177845,-0.0342998755847,-0.0103809235608,-0.0252294936162,-0.0121595952903,-0.00141301872989,0.00325304671174
0x81,15,1.12621908731,-0.0671880114658,-0.0265077431275,-0.0328947207599,0.00568260919965,-0.00824053581943,0.00186219324855,0.00106712141852
0x81,18,1.13963608013,-0.086480457715,-0.0169397592634,-0.0319940468824,0.00519799234608,-0.0146822034458,0.00358954919294,0.00167284563829
0x81,19,1.13047028306,-0.0646519343548,-0.026672435949,-0.0119356422405,-0.0210176112193,-0.0104939850543,0.00377041709352,0.000530908662749
0x81,20,1.13092450177,-0.0680966108617,-0.0168070169979,-0.0280056903877,-0.00573344789056,-0.0167625964976,0.00304279744114,0.00143806342079
0x81,21,1.1280312308,-0.0608889388742,-0.0309420313672,-0.00691762399431,-0.0236958905946,-0.0104164045556,0.00130495020813,0.00352470837998
0x81,25,1.1296755081,-0.0746859074853,-0.0205954242883,-0.0244897605658,-0.00775725982806,-0.00821100122647,0.00435689667808,0.00170694861117
0x81,26,1.11402153936,-0.0471056752741,-0.0312185125156,-0.00978039493063,-0.0232253813458,-0.00799071227868,0.00461326906176,0.000685867921246
0x81,27,1.13473474344,-0.0648332520734,-0.0262786314876,-0.0238367801233,-0.0140247880765,-0.011639596857,0.00347973263577,0.00239857254364
0x81,28,1.11027356969,-0.0486111898767,-0.0325295694349,-0.0151594427815,-0.0262492012787,0.00836124760589,0.00269625971097,0.0012183263657
0x81,30,1.15806862546,-0.0915049308626,-0.030418276013,-0.0204160899631,-0.00760979835282,-0.0140271160807,0.00279582280868,0.00311176300293
0x81,31,1.14841425295,-0.0763133572256,-0.02663420288,-0.019300393347,-0.0139984128619,-0.0177005613178,0.00233649114043,0.00319618353727
0x81,32,1.14043467472,-0.0635139668171,-0.0402176389786,-0.0121297513247,-0.00213093613794,-0.0271057809327,0.0026296665786,0.00203373289516
0x81,33,1.15624660194,-0.0874090224709,-0.0287822001388,-0.0169936793776,-0.0171042793218,-0.012104143223,0.00404409701778,0.00210262557312
0x81,36,1.16660238186,-0.0924819427687,-0.0303331102507,-0.0188835245149,-0.0090941131968,-0.0191787112873,0.00209441551771,0.00127460463717
0x81,37,1.16442387119,-0.0857205682843,-0.0325383797236,-0.0243703882572,-0.0232163953234,-0.00282407181448,0.0028453747938,0.00140055742109
0x81,38,1.16247928567,-0.0814777437741,-0.0292056180626,-0.0210108870892,-0.00722355497349,-0.0281524468425,0.00189816027024,0.0026928048006
0x81,39,1.1512737285,-0.0995203178592,-0.0445587166697,-0.00371616776232,-0.0134941378531,0.00643372943984,0.00277294789689,0.000808934306217
0x81,42,1.1233839551,-0.065521197914,-0.0297520105423,-0.0141398488435,-0.00643980448673,-0.0133715081287,0.00252666448388,0.00331375033598
0x81,43,1.13806915375,-0.0545414824928,-0.0302498977742,-0.0172931828413,-0.0123805965382,-0.0265588149812,0.000472130899848,0.0024826899779
0x81,44,1.13104434537,-0.0781162345656,-0.0248547320969,-0.00683951152706,-0.0139459602411,-0.0143259891584,0.0060398862445,0.00099819597646
0x81,45,1.13177563162,-0.0595406637197,-0.0172559184362,-0.0202629075059,-0.0154636502219,-0.020961366092,-0.000312186280437,0.00202106063685
0x2,0,1.127309074,-0.0948338711073,0.00689719469771,-0.0170349776264,-0.0223302070292,-0.00236607726527,0.000717732261,0.00164113206622
0x2,1,1.13988103523,-0.0533547201615,-0.0496425465023,-0.0210709219886,-0.00819664293734,-0.0128284920008,0.00296497881564,0.00224730954422
0x2,2,1.12453626535,-0.0767737939923,-0.00678046632606,-0.00692833849934,-0.0178481654123,-0.0211208298254,0.00303652803537,0.00187880067155
0x2,3,1.12355217117,-0.0452038329571,-0.0425165874838,-0.0266053909465,0.00131478702089,-0.0152754798914,0.00185764643285,0.00287668665636
0x2,4,1.12780688614,-0.078547795853,-0.00897925063613,-0.00741002481053,-0.0219124778579,-0.0136240905374,0.00167324818666,0.000993505370944
0x2,5,1.1272300393,-0.0518133601752,-0.057902341061,-0.0166745694423,0.00645962734434,-0.0115348115196,0.0015879143414,0.00264750121376
0x2,6,1.16294812226,-0.0810614625806,-0.0508222204296,-0.0319508026489,-0.00887291125248,0.0044270137078,0.00173410354583,0.00359815739829
0x2,7,1.15494699746,-0.0912406213316,-0.0178104535909,-0.0120709715902,-0.0258338475647,-0.0116185923916,0.00106440614262,0.00256308286688
0x2,8,1.16877204094,-0.0732074670879,-0.0476675794632,-0.0303111680397,-0.00956549220998,-0.01213186048,0.00144680037372,0.00266472597058
0x2,9,1.15062073392,-0.0967451974964,0.00197835599773,-0.0228648411954,-0.0159059742493,-0.0220699895362,0.00284202183566,0.00214489072124
0x2,10,1.12502759203,-0.0446371555108,-0.0431520002479,-0.0237801615412,-0.00746683944917,-0.0140335224137,0.00349716395989,0.00454492316803
0x2,11,1.04641812157,-0.0172202122289,-0.00238373800566,-0.0125693911942,-0.0270634890612,0.00175076484355,0.0010520486707,0.0100158954099
|
Everything works except L3 p-side.
The config file is shown in the following:
### Original Configuration File Name: /home/katsuro/tuxdaq_devel/config/delay_scan.latency_scan.cfg ###
### Original Configuration File Name: /home/katsuro/tuxdaq_devel/config/delay_scan.updated.cfg ###
#
# This is the default config file for the APV_BELLE software
#
#
# Lines preceded by a # or ; sign are ignored.
#
# [rem] comments a whole section until the next section start marked by [xxx] .
#
[soc]
ena = 0
addr =
port = 9999
# [vme]
# VME addresses are given in the format
# {module_name} = {vme_module_number},{vme_address_hex}
# nec ... NECO module
# adf ... particular FADC module
#
# Please note that the address ranges are not defined here,
# they are implicitly given by the hardware.
# Module numbers must fill from 0 (this is not checked).
# Please note that no range checking is performed.
# There is no access to VME modules that are not included in this list,
[vme]
nec = 0,0xaa000000
# p side
adf = 0,0x01000000
adf = 1,0x81000000
# n side
# [nec]
# NECO related information
# mod = 0|1,{shift_register_delay},{adc_range},{win_delay},{win_length},{dead_time},{time_lat},{max_trg}
# (default: 0,75,0,50?,900?,36,2,1)
# res = {list of entries in reset sequence} (default: 2,4)
# cal = {list of entries in cal sequence} (default: 2,3,250,251)
# sw5 = {list of entries in single cal sequence} (default: 2,3)
# str = {list of entries in software trigger sequence} (default: 75)
# htr = {list of entries in hardware trigger sequence} (default: 74)
#
# mod specifies to use either the sequencer (0) or the shift register (1) for hardware trigger and the
# delay of the shift register (0..255); adc_range (0=1Vpp, 1=2Vpp) -- ignored; win_delay and win_length define
# the starting point (relative to the APV trigger) and length of the ADC gate in transparent mode; dead_time is
# the number of 254MHz clock cycles which are set to zero for time measurement after an incoming trigger;
# time_lat is the latency for time measurement in terms of 40MHz clock cycles; max_trg is the number of incoming
# triggers which required to activate the veto logic (usually 1; 0 completely disables the veto logic)
# res, cal, sw5, str and htr are containing the bits to set in the 256-element sequencer memory (nothing is set at -1)
# Please note that cal+str together produce a calibration request plus subsequent normal trigger, so the time
# between them is the latency. sw5 is used to send a single cal request to achieve the correct polarity in
# case the APV inverter is turned on (this feature only works for entire MAMBOs halves = groups of 3 REBOs)
#
# These settings are quite fragile! Do not modify until you know exactly what you are doing.
[nec]
# 30m cables, 40mhz, Tp=50ns, single-trigger
#mod = 0,75,0,70,250,36,2,1
#htr = 64,-1,-1,-1,-1,-1,-1,-1
#str = 100,-1,-1,-1,-1,-1,-1,-1
# TESTBEAM Nov 07, 30m cables, 40mhz, Tp=50ns, multi-trigger (6 samples)
# mod = {0:max triggers, 1:latency, 2:software trigger latency, do not care about the rest}
mod = 0,120,250,0,0,0,0,0
stp = 150,-1,-1,-1,-1,-1,-1,-1
stn = 150,-1,-1,-1,-1,-1,-1,-1
#common settings
rep = 2,-1,-1,-1,-1,-1,-1,-1
ren = 2,-1,-1,-1,-1,-1,-1,-1
cap = 2,52,-1,-1,-1,-1,-1,-1
can = 52,250,-1,-1,-1,-1,-1,-1
# location of file to fir filter can be rel. path
[fir]
# enable fir 1 true otherwise false
ena = 0
# path to fir coef file
pat = /mnt/data/LabLadder5/FIR_L5_class_b-_20150429153730.fir
# [daq]
# DAQ related specifications are given in the format
# ads = {N},{search_max_subevents},0,x
# ini = {initevents},{readout_mode},0,x
# deh = {module_position},{apv_position},0,x
# i2t = {N},0,0,x
# pat = 0,0,0,{data_file_path}
# clk = {N},{Delay25 frequency range},0,x
# pdl = {Trigger input delay},0,0,x
# crd = {crate_number},{clkdel},{trgdel},x
#
# ads N gives the number of samples that are read out from the FIFO1 in transparent mode, search_max_subevents is the
# maximum number of subevents to search for within one ADC stream (default=1).
# ini: initevents is the number of software triggers in the beginning of a run for pedestal and noise
# evaluation. At the beginning of each run, 2*initevents are generated by software, after that the
# selected trigger source (hardware, software of calibration) is activated. The initial evaluation
# events are written to disk as normal events are.
# ini: readout_mode defines whether events beyond the initevents are read in raw transparent mode from FIFO1 (0) or
# in processed mode (1) where only hit information is read from FIFO3
# deh is the APV chip for which single strip histograms are recorded
# i2t is the maximum number of I2C retries in case of failure
# pat specifies the save path for data files (must include a trailing backslash!)
# clk gives the system clock period in integer ns (25 max.) and the frequency range for the Delay25 chip:
# 0...40 MHz, 1...80 MHz, 2...32 MHz, 3...64 MHz
# pdl specifies the delay setting for the trigger input in 0.5ns steps (0..49)
# crd define the global clock and trigger delays between NECO and SVD3_buffer for crates 0 and 1
# NOTE: clock and trigger is NOT propagated to any crate(s) NOT specified here
[daq]
# TESTBEAM Nov 07
#Standard
#ads = 600,3,0,x
# TESTBEAM Nov 07
#Multitrigger (6)
#~ ads = 940,6,0,x
ads = 250,1,0,x
# RAW (transparent mode) readout
ini = 300,0,0,x
# PROCESSED readout
#ini = 300,1,0,x
deh = 1,0,0,x
i2t = 5,0,0,x
pat = 0,0,0,/mnt/data/LabLadder5
#standard 40mhz clock (25ns)
clk = 25,0,0,x
pdl = 25,0,0,x
#crate distribution delays (set to mid-range to allow adjustments in both directions)
crd = 0,25,25,x
#we don't use crate 1, so we don't set any delay here -> no clock/trigger to crate 1
###crd = 1,25,25,x
# [hit]
# Hit recognition variables are specified here
# hcs = {hitcut_/home/hao/Desktop/vme_tests/vme_test_caen/Releaseseed_strip},{hitcut_neighbor_strips}
# nok = {x.x},0
#
#
# hcs gives seed and neighbor hit cuts in units of strpAPVip sigma
# nok states the threshold over average noise at which strips are excluded from further analysis (to exclude noisy strips)
[hit]
# si sensor
hcs = 5.0,3.0
# do not exclude strips
nok = 2000.0,0
# [cal]
# Calibration related data
# lvl = {level},0
# lat = {latbeg},{latend}
# sam = {average_samples},{number of samples in 6-tuple mode}
# grp = {number_of_groups},0
# lg6 = {latency},{group}
# lv6 = {startlevel},{endlevel}
#
# lvl is the CLVL amplitude (0..255), 1 is 625e-, 36 is 1 MIP (22500e-) nominally, in reality 26 is 1 MIP
# lat is the Latency range to
#~ cover (latend-latbeg>=2, latend-latbeg<=15)
# sam is the number of samples to average per position for normal and 6-tuple modes
# grp is how many groups to scan (<=8), first group is strips 0,8,16,..., second group is 1,9,17,..., ...
# lg6 defines the latency in 6-tuple mode and which group to observe in that mode
# lv6 defines the scan range of amplitude in 6-tuple mode
[cal]
#real 1 MIP level (22400e)
lvl = 26,0
#real 5 MIPs level
#lvl = 130,0/home/hao/Desktop/vme_tests/vme_test_caen/Release
#LAT=95/98 Calibration (short display)
#lat = 89,100
#LAT=95/98 Calibration (short display for >=50mhz)
#lat = 81,98
#LAT=95/98 Calibration (long peak mode tail display)
lat = 75,100
#common settings
sam = 50,150
grp = 8,0
#6-tuple mode settings
lg6 = 97, 1
#lv6 = 1,95
lv6 = 50,52
# [i2c]
# This section defines one or more I2C sets for the APV25. In the [mod] section, those sets are referenced to by their number.
# ia2 = {number},{mode},{lat},{ipre},{ipcasc},{ipsf},{isha},{issf},{ipsp},{imuxin},{vfp},{vfs},{vpsp},{muxgain}
#
# The I2C settings must be individually numbered (ascending from 0). The easiest case is to use the same
# settings for all chips of one type, but one could go so far to use separate settings for each chip.
# vadj/vpsp is set individually for each apv in the [mod] section, the value specified here is meaningless.
[i2c]
# apv25s1, peak, inverter ON, Tp=50ns, (p side)
ia2 = 0, 63, 23, 98, 52, 34, 34, 34, 55, 34, 30, 60, 0, 4
# apv25s1, peak, inverter OFF, Tp=50ns, (n side)
ia2 = 1, 31, 23, 98, 52, 34, 34, 34, 55, 34, 30, 60, 0, 4
# apv25s1, multi-peak, inverter ON, Tp=50ns, (p side)
#~ ia2 = 0, 61, 17, 98, 52, 34, 34, 34, 55, 34, 30, 60, 0, 4
# apv25s1, multi-peak, inverter OFF, Tp=50ns, (n side)
#~ ia2 = 1, 29, 17, 98, 52, 34, 34, 34, 55, 34, 30, 60, 0, 4
# apv25s1, peak, inverter ON, Tp=50ns, (p side), for cooled APV chips, -10C
#~ ia2 = 0, 61, 17, 85, 45, 30, 50, 30, 48, 30, 30, 50, 0, 4
# apv25s1, multi-peak, inverter OFF, Tp=50ns, (n side), for cooled APV chips, -10C
#~ ia2 = 1, 29, 17, 85, 45, 30, 34, 30, 48, 30, 30, 60, 0, 4
# [mod]
# Detector module (actually hybrid) specifications are given in the format
# mod = {module_position},{crate_number},{fadc_number},{adc_number},{hybrid_number},m,{adc_delay},0,0,0,0,0,0,{Name}
# apv = {module_position},{apv_position},{i2c_address},{i2c_settings},{vadj/vpsp},x,0,0,{fadc_offset},{fadc_number},{fadc_channel},{fadc_clkdelay [0..49]},{AD8128_gain},x
#
# mod gives the hybrid/module properties: The position counts from 0 to 7 in beam direction,
# Name must not contain blanks ("_" is allowed).
# apv describes the chips located on a hybrid
# and the ADC channel where they are read out, either a Vienna ADC (a) or a FED (f).
# The ADC offset is only available with the Vienna ADCs and shifts the baseline.
#~ # The individual chip vadj setting dominates over the [i2c] setting.
# p-side
[mod]
mod = 1,0,0,0,0,m,24,0,0,0,0,0,0,fw_p
apv = 1,0,34,0,30,x,0,0,0,0,0,0,0,x
apv = 1,1,36,0,30,x,0,0,0,0,1,0,0,x
apv = 1,2,38,0,30,x,0,0,0,0,2,0,0,x
apv = 1,3,40,0,30,x,0,0,0,0,3,0,0,x
apv = 1,4,42,0,30,x,0,0,0,0,4,0,0,x
#~ apv = 1,5,44,0,30,x,0,0,0,0,5,0,0,x
[mod]
mod = 2,0,0,1,1,m,38,0,0,0,0,0,0,ce_p
apv = 2,0,34,0,30,x,0,0,0,0,6,0,0,x
apv = 2,1,36,0,30,x,0,0,0,0,7,0,0,x
apv = 2,2,38,0,30,x,0,0,0,0,8,0,0,x
apv = 2,3,40,0,30,x,0,0,0,0,9,0,0,x
apv = 2,4,42,0,30,x,0,0,0,0,10,0,0,x
apv = 2,5,44,0,30,x,0,0,0,0,11,0,0,x
[mod]
mod = 3,0,0,2,2,m,40,0,0,0,0,0,0,-z_p
apv = 3,0,34,0,30,x,0,0,0,0,12,0,0,x
apv = 3,1,36,0,30,x,0,0,0,0,13,0,0,x
apv = 3,2,38,0,30,x,0,0,0,0,14,0,0,x
apv = 3,3,40,0,30,x,0,0,0,0,15,0,0,x
apv = 3,4,42,0,30,x,0,0,0,0,16,0,0,x
apv = 3,5,44,0,30,x,0,0,0,0,17,0,0,x
[mod]
mod = 4,0,0,3,3,m,24,0,0,0,0,0,0,bw_p
apv = 4,0,34,0,30,x,0,0,0,0,18,0,0,x
apv = 4,1,36,0,30,x,0,0,0,0,19,0,0,x
apv = 4,2,38,0,30,x,0,0,0,0,20,0,0,x
apv = 4,3,40,0,30,x,0,0,0,0,21,0,0,x
apv = 4,4,42,0,30,x,0,0,0,0,22,0,0,x
apv = 4,5,44,0,30,x,0,0,0,0,23,0,0,x
[mod]
#~ mod = 5,0,0,4,4,m,24,0,0,0,0,0,0,L3_p
#~ apv = 5,0,34,0,30,x,0,0,0,0,24,0,0,x
#~ apv = 5,1,36,0,30,x,0,0,0,0,25,0,0,x
#~ apv = 5,2,38,0,30,x,0,0,0,0,26,0,0,x
#~ apv = 5,3,40,0,30,x,0,0,0,0,27,0,0,x
#~ apv = 5,4,42,0,30,x,0,0,0,0,28,0,0,x
#~ apv = 5,5,44,0,30,x,0,0,0,0,29,0,0,x
[mod]
mod = 6,0,0,5,5,m,24,0,0,0,0,0,0,L4_p
apv = 6,0,34,0,30,x,0,0,0,0,30,0,0,x
apv = 6,1,36,0,30,x,0,0,0,0,31,0,0,x
apv = 6,2,38,0,30,x,0,0,0,0,32,0,0,x
apv = 6,3,40,0,30,x,0,0,0,0,33,0,0,x
apv = 6,4,42,0,30,x,0,0,0,0,34,0,0,x
apv = 6,5,44,0,30,x,0,0,0,0,35,0,0,x
[mod]
mod = 7,0,0,6,6,m,24,0,0,0,0,0,0,L5_p
apv = 7,0,34,0,30,x,0,0,0,0,36,0,0,x
apv = 7,1,36,0,30,x,0,0,0,0,37,0,0,x
apv = 7,2,38,0,30,x,0,0,0,0,38,0,0,x
apv = 7,3,40,0,30,x,0,0,0,0,39,0,0,x
apv = 7,4,42,0,30,x,0,0,0,0,40,0,0,x
apv = 7,5,44,0,30,x,0,0,0,0,41,0,0,x
[mod]
mod = 8,0,0,7,7,m,24,0,0,0,0,0,0,L6_p
apv = 8,0,34,0,30,x,0,0,0,0,42,0,0,x
apv = 8,1,36,0,30,x,0,0,0,0,43,0,0,x
apv = 8,2,38,0,30,x,0,0,0,0,44,0,0,x
apv = 8,3,40,0,30,x,0,0,0,0,45,0,0,x
apv = 8,4,42,0,30,x,0,0,0,0,46,0,0,x
apv = 8,5,44,0,30,x,0,0,0,0,47,0,0,x
#---------------------------------------------------- n-side
[mod]
mod = 9,0,1,0,0,m,28,0,0,0,0,0,0,fw_n
apv = 9,0,34,1,30,x,0,0,5,1,0,0,0,x
apv = 9,1,36,1,30,x,0,0,5,1,1,0,0,x
apv = 9,2,38,1,30,x,0,0,5,1,2,0,0,x
apv = 9,3,40,1,30,x,0,0,5,1,3,0,0,x
[mod]
mod = 10,0,1,1,1,m,33,0,0,0,0,0,0,ce_n
apv = 10,0,34,1,30,x,0,0,5,1,6,0,0,x
apv = 10,1,36,1,30,x,0,0,5,1,7,0,0,x
apv = 10,2,38,1,30,x,0,0,5,1,8,0,0,x
apv = 10,3,40,1,30,x,0,0,5,1,9,0,0,x
[mod]
mod = 11,0,1,2,2,m,35,0,0,0,0,0,0,-z_n
apv = 11,0,34,1,30,x,0,0,5,1,12,0,0,x
apv = 11,1,36,1,30,x,0,0,5,1,13,0,0,x
apv = 11,2,38,1,30,x,0,0,5,1,14,0,0,x
apv = 11,3,40,1,30,x,0,0,5,1,15,0,0,x
[mod]
mod = 12,0,1,3,3,m,27,0,0,0,0,0,0,bw_n
apv = 12,0,34,1,30,x,0,0,5,1,18,0,0,x
apv = 12,1,36,1,30,x,0,0,5,1,19,0,0,x
apv = 12,2,38,1,30,x,0,0,5,1,20,0,0,x
apv = 12,3,40,1,30,x,0,0,5,1,21,0,0,x
[mod]
mod = 13,0,1,4,4,m,24,0,0,0,0,0,0,L3_n
#~ apv = 13,0,34,0,30,x,0,0,0,1,24,0,0,x
apv = 13,1,36,0,30,x,0,0,0,1,25,0,0,x
apv = 13,2,38,0,30,x,0,0,0,1,26,0,0,x
apv = 13,3,40,0,30,x,0,0,0,1,27,0,0,x
apv = 13,4,42,0,30,x,0,0,0,1,28,0,0,x
#~ apv = 13,5,44,0,30,x,0,0,0,1,29,0,0,x
[mod]
mod = 14,0,1,5,5,m,24,0,0,0,0,0,0,L4_n
apv = 14,0,34,0,30,x,0,0,0,1,30,0,0,x
apv = 14,1,36,0,30,x,0,0,0,1,31,0,0,x
apv = 14,2,38,0,30,x,0,0,0,1,32,0,0,x
apv = 14,3,40,0,30,x,0,0,0,1,33,0,0,x
#~ apv = 14,4,42,0,30,x,0,0,0,1,34,0,0,x
#~ apv = 14,5,44,0,30,x,0,0,0,1,35,0,0,x
[mod]
mod = 15,0,1,6,6,m,24,0,0,0,0,0,0,L5_n
apv = 15,0,34,0,30,x,0,0,0,1,36,0,0,x
apv = 15,1,36,0,30,x,0,0,0,1,37,0,0,x
apv = 15,2,38,0,30,x,0,0,0,1,38,0,0,x
apv = 15,3,40,0,30,x,0,0,0,1,39,0,0,x
#~ apv = 15,4,42,0,30,x,0,0,0,1,40,0,0,x
#~ apv = 15,5,44,0,30,x,0,0,0,1,41,0,0,x
[mod]
mod = 16,0,1,7,7,m,24,0,0,0,0,0,0,L6_n
apv = 16,0,34,0,30,x,0,0,0,1,42,0,0,x
apv = 16,1,36,0,30,x,0,0,0,1,43,0,0,x
apv = 16,2,38,0,30,x,0,0,0,1,44,0,0,x
apv = 16,3,40,0,30,x,0,0,0,1,45,0,0,x
#~ apv = 16,4,42,0,30,x,0,0,0,1,46,0,0,x
#~ apv = 16,5,44,0,30,x,0,0,0,1,47,0,0,x |