ID |
Date |
Author |
Project |
Subject |
Run Number |
Events |
XYPosition |
Cooling |
Data |
41
|
Sun Jun 7 20:03:31 2015 |
Thomas Bergauer | SVD3 (H6B) | hardware run with TLU and Telescope | hw052 | 50000 | 4 | No | Good |
RUN WITH SVD3 plus telescope
EUDET Run 52
Mimosa Threshold 7
Pos 4: x=130.7 mm, y=84 mm (hits auf APV 2 und (bisschen) 3, (bisschen) 8 und 9, 15 und 16 |
42
|
Sun Jun 7 20:37:56 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run with TLU and Telescope | hw053 | 50000 | 5 | | Good |
RUN WITH SVD3 plus telescope
EUDET Run 53
Mimosa Threshold 6
Pos 5: x=30.5 mm, y= 99.74 mm (wide side top) |
43
|
Sun Jun 7 23:04:06 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 013 | 50000 | | | Good |
cooled (see attachment)
FIRRun002, PedestalRun006
target: CE, pos 3
cooling box emergency break ... ie about the last 1-10 k not useable. |
44
|
Sun Jun 7 23:09:29 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 014 | 224k | | | Good |
cooled (see attachment) in - 20,5 out -7,8
FIRRun002, PedestalRun006
target: fw, pos 4 |
45
|
Sun Jun 7 23:09:46 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run with TLU and Telescope | hw054 | 120000 | 6 | No | Good |
RUN WITH SVD3 plus telescope
EUDET Run 54
Mimosa Threshold 6
Pos 6: x=136.08 mm, y= 91.49 mm (narrow side top) |
46
|
Mon Jun 8 01:28:58 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run with TLU and Telescope | hw055 | 410000 | 7 | No | Good |
RUN WITH SVD3 plus telescope
EUDET Run 55
Mimosa Threshold 6
Pos 7: x= 30.5 mm, y= 79 mm (wide side center) |
47
|
Mon Jun 8 09:21:01 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 015 | 70000 | 8 | Yes | Good |
cooled (see attachment) in - 21 out -18
FIRRun002, PedestalRun006
target: fw, pos 8 |
48
|
Mon Jun 8 09:37:30 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run with TLU and Telescope | hw056 | 50000 | 8 | No | Good |
RUN WITH SVD3 plus telescope
EUDET Run 56
Mimosa Threshold 6
Pos 8: x=136.08 mm, y= 79 mm (narrow side center) |
49
|
Mon Jun 8 10:47:44 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run with TLU and Telescope | hw057 | 50000 | 9 | No | Good |
RUN WITH SVD3 plus telescope
EUDET Run 57
Mimosa Threshold 6
Pos 9: x=30.5 mm, y= 60.67 mm (wide side down) |
50
|
Mon Jun 8 11:33:24 2015 |
Thomas Bergauer | common | beam profile | | | | | Unknown |
120GeV hadrons, beam config H6A.BELLE.003 |
51
|
Mon Jun 8 11:57:14 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run with TLU and Telescope | hw058 | 50000 | 10 | No | Good |
RUN WITH SVD3 plus telescope
EUDET Run 58
Mimosa Threshold 6
Pos 10: x= 136.08mm, y=68.9 mm (narrow side down) |
52
|
Mon Jun 8 14:48:27 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 016 | ~96k | 9 | Yes | Good |
cooled (see attachment) in --21.24 out -18-54
FIRRun002, PedestalRun006
target: fw, pos 9 |
53
|
Mon Jun 8 15:03:53 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run with TLU and FEI4 WORKING | 59 | 19000 | | | Unknown |
Testrun with the FEI4 working for the first time.
Lessons learned about the configuration:
EnableDUTVeto needs to be set for the FEI4 to allow it to work
HandShakeMode needs to be enabled for the FEI4 as well
"Enable RJ45 input during scans" needs to be enabled for the USB-controller |
54
|
Mon Jun 8 15:49:23 2015 |
Benedikt Würkner | SVD3 (H6B) | Hardware FEI4 | 60 | 50000 | 10 | No | Unknown |
Hardware run with FEI4, Telescope and FW&BW Modules
Pos 10: x= 136.08mm, y=68.9 mm (narrow side down)
Bilder: Hitmap FE-I4 und Correlation zw. Mimosa und FE-I4 |
56
|
Mon Jun 8 16:53:13 2015 |
Benedikt Würkner | SVD3 (H6B) | EUTelescope Fitter not working investigation | | | | | Unknown |
Apparently every problem can be attributed to a misalignment problem. The telescope has troubles with heavily misaligned DUTs. Was resolved by creating different gear-files for each run with pretty precise coordinates of the DUT position calculated for the telescope coordinate system.
Additionally one has to watch out for misaligned planes of the telescope itself. It was required to allow for more than 2mm offset for the telescope planes behind the DUTs. This can be easily checked by looking at the PreAligner plots in the -hitmaker-histo.root file.
It look something like this:
and not like this:
Run number |
offset value |
Comment |
49 |
-1 |
|
50 |
-1 |
Expected default value. EORE=49401 |
51 |
-1 |
Expected default value. EORE=49400 |
52 |
-1 |
Checked -1 EORE= 49401 |
53 |
-1 |
Checked -1 EORE= 49401 |
54 |
-1 |
Checked -1 EORE= 119401, |
55 |
-1 |
Checked -1 EORE= 409388 |
56 |
-1 |
Checked -1 EORE= 49392 |
57 |
-1 |
Checked -1 EORE= 49377 |
58 |
-1 |
Checked -1 EORE= 49397 |
Run |
Position |
x-Table |
x-telescope FW |
x-telescope BW |
49 |
1 |
100 |
-13,7 |
-16,7 |
50 |
2 |
69,3 |
17 |
14 |
51 |
3 |
38,6 |
47,7 |
44,7 |
52 |
4 |
130,7 |
-44,4 |
-47,4 |
53 |
5 |
30,5 |
55,8 |
52,8 |
54 |
6 |
136,8 |
-50,5 |
-53,5 |
55 |
7 |
30,5 |
55,8 |
52,8 |
56 |
8 |
136,8 |
-50,5 |
-53,5 |
57 |
9 |
30,5 |
55,8 |
52,8 |
58 |
10 |
136,8 |
-50,5 |
-53,5 |
|
57
|
Mon Jun 8 18:00:06 2015 |
Benedikt Würkner | SVD3 (H6B) | Hardware FEI4 | hw061 | 50000 | 2 | No | Unknown |
RUN WITH SVD3, telescope and FEI4
EUDET Run 61
Mimosa Threshold 6
Pos 2: x=69.3 mm, y=79 mm (Hits in APV 3-4 und 8-9 in p-Seite und 13 und 18 in n-Seite) |
58
|
Mon Jun 8 18:08:49 2015 |
Thomas Bergauer | SVD3 (H6B) | Telescope online monitor | | | | | Unknown |
a working version of the EUDET online monitor (which works also with the FE-I4) is at the following location
~/BELLETEST/eudaq-neu/build/monitors/onlinemon$ ./OnlineMon.exe -sc 0 -f /home/telescope/eudaq/data/run000060.raw |
59
|
Mon Jun 8 20:13:59 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 017 | | 5 | Yes | Good |
cooled (see attachment) in -21.24 out -18.54
cooling supply emty at ~24:00 ie first 30k is cooled.
FIRRun002, PedestalRun006
target: BW, pos 5 |
60
|
Mon Jun 8 20:16:41 2015 |
Benedikt Würkner | SVD3 (H6B) | Hardware FEI4 | 62 | 50000 | 3 | No | Unknown |
RUN WITH SVD3, telescope and FEI4
EUDET Run 62
Mimosa Threshold 6
Pos 3: x=38.6 mm, y=84 mm |
61
|
Mon Jun 8 22:11:07 2015 |
Benedikt Würkner | SVD3 (H6B) | Hardware FEI4 | 63 | 490000 | 4 | No | Unknown |
RUN WITH SVD3, telescope and FEI4
EUDET Run 63
Mimosa Threshold 6
Pos 4: x=130.7 mm, y=84 mm |