Home Clean room MedAustron HEPHY testbeams old
testbeam-DESY-Oct2017 testbeam-DESY-April2017 testbeam-SPS2015 testbeam-SPS2014 testbeam-DESY14 testbeam-SPS12 testbeam-SPS11 testbeam-SPS10 testbeam-SPS09 testbeam-SPS08 LP-TPC
  Belle testbeam at SPS in June 2015, Page 1 of 6  Not logged in ELOG logo
ID Date Author Project Subject Run Number Events XYPosition Cooling Datadown Text Attachments
  1   Tue May 12 10:27:39 2015 Benedikt WürknerSVD3 (H6B)Setup information    UnknownInformation concerning the SVD3 setup during
a beam test

In the beam area setup the whole
 spider-config.jpg 
  2   Wed Jun 3 10:48:42 2015 Benedikt WürknercommonNetworking    UnknownWLAN Router:

SSID:
Hephy

password: 20supersecret14
  
  3   Wed Jun 3 17:23:07 2015 Thomas BergauerBelle II FADC (H6A)XY stage positions    Unknownx-Achse: positiv Richtung Saleve (counting
room)
 L5_Class_B-.PNG 
  9   Thu Jun 4 18:49:03 2015 Benedikt WürknerSVD3 (H6B)Setup    Unknown   IMG_20150604_184442.jpgIMG_20150604_184451.jpgIMG_20150604_184516.jpg 
  14   Fri Jun 5 19:55:00 2015 Hao YinBelle II FADC (H6A)Sixlet Calibration003   Unknownlat = 98

room temp

pedestalrun 003
  
  16   Fri Jun 5 23:38:51 2015 Hao YinBelle II FADC (H6A)Pedestal00510000  UnknownReadjust after cooling box.

room temp, firrun002
 
  
  20   Sat Jun 6 16:14:36 2015 Benedikt WürknerSVD3 (H6B)calibration run and setup informationcal01   UnknownCalibration Run with +- 50V Bias with higher
compliance since the p-side draws more current
than expected (23muA by the MAMBO)
  
  22   Sat Jun 6 16:18:48 2015 Benedikt WürknerSVD3 (H6B)hardware runhw00350000  UnknownTable: 100:70

Bias: +-50V

Run to confirm trigger delay
  
  24   Sat Jun 6 21:00:15 2015 Benedikt WürknerSVD3 (H6B)first hardware run with TLU and Telescopehw004117171  UnknownTable: 100:70

Bias: +-50V

600 pedestal
  
  27   Sun Jun 7 10:36:38 2015 Hao YinBelle II FADC (H6A)Pedestal00610000  UnknownCooled, Temp see attachment
FirRun002
 
 Pos1.PNG 
  30   Sun Jun 7 12:10:24 2015 Benedikt WürknerSVD3 (H6B)Telescope Threshold8b test run 004614399  UnknownTelescope in combination with SVD3   
  31   Sun Jun 7 12:11:42 2015 Benedikt WürknerSVD3 (H6B)Telescope Threshold7 test run 004738175  UnknownTelescope alone   
  32   Sun Jun 7 12:12:00 2015 Benedikt WürknerSVD3 (H6B)Telescope Threshold7 test run 004853356  UnknownTelescope alone   
  36   Sun Jun 7 14:44:29 2015 Thomas BergauerSVD3 (H6B)XY Stage and DUT Positions    UnknownCoordinate system:

pos x-Direction = Jura side

pos y-Direction = Down
 FWD-BWD.PNGapv-numbering.jpgFWD-BWD_Bemaßung.PNG 
  38   Sun Jun 7 15:59:05 2015 Hao YinBelle II FADC (H6A)Hardware01250000  Unknowncooled (see attachment)

FIRRun002, PedestalRun006

target: CE, pos 2
 Pos3.PNG 
  39   Sun Jun 7 20:02:40 2015 Hao YinBelle II FADC (H6A)Cooling Box Emergency break    UnknownSomething triggered a emergency break.
HWRun012 only last 1-10k event has to be
discarded.
  
  50   Mon Jun 8 11:33:24 2015 Thomas Bergauercommonbeam profile    Unknown120GeV hadrons, beam config H6A.BELLE.003  Beamprofile.png 
  53   Mon Jun 8 15:03:53 2015 Benedikt WürknerSVD3 (H6B)hardware run with TLU and FEI4 WORKING5919000  UnknownTestrun with the FEI4 working for the first
time. 

Lessons learned about the configuration:
  
  54   Mon Jun 8 15:49:23 2015 Benedikt WürknerSVD3 (H6B)Hardware FEI4605000010NoUnknownHardware run with FEI4, Telescope and FW&BW
Modules

Pos 10
 Screenshot_2015-06-08_17.59.50.pngScreenshot_2015-06-08_17.41.03.png 
  56   Mon Jun 8 16:53:13 2015 Benedikt WürknerSVD3 (H6B)EUTelescope Fitter not working investigation    UnknownApparently every problem can be attributed
to a misalignment problem. The telescope
has troubles with heavily misaligned DUTs.
 nice-alignment.pngbad-alignment.png 
ELOG V3.1.4-966e3dd