Home CMS Production Clean room MedAustron HEPHY testbeams old
testbeam-rd50-desy-Oct2024 testbeam-RD50-DESY-Apr2024 testbeam-RD50-DESY-Jul2023 testbeam-RD50-CERN-Oct2022 testbeam-DESY-Oct2017 testbeam-DESY-April2017 testbeam-SPS2015 testbeam-SPS2014 testbeam-DESY14 testbeam-SPS12 testbeam-SPS11 testbeam-SPS10 testbeam-SPS09 testbeam-SPS08 LP-TPC
  HEPHY logbook for testbeam at SPS September/October 2010, Page 7 of 8  Not logged in ELOG logo
New entries since:Thu Jan 1 01:00:00 1970
ID Date Author Project Subject Run Number Events StartTime EndTime
  28   Tue Sep 28 23:24:35 2010 Markus FriedlBELLErunrun007146028.09.2010 23:23:2928.09.2010 23:27:54

Belle stack: Origami-Micron-Micron-Origami
HV=100V, Ibias=38A, beam on
cooling: Origami only, chiller: -25C, Module: -10C
modified I2C settings for cooled modules
centered again

 

telescope run 20082

 

sensor config bug (only relevant for sensor display) found -> stopped

  27   Tue Sep 28 23:23:47 2010 Markus FriedlBELLErunrun006200328.09.2010 23:13:2228.09.2010 23:22:26

channels swapped -> stopped

  26   Tue Sep 28 22:09:39 2010 Markus FriedlBELLETemperature sensors Belle stack    

PicoLogic TC-08 temperature sensor assignment Belle stack:

Sensor type: K

channel 1:  Origami_mod1_in
channel 2:  Origami_mod1_out
channel 3:  Origami_mod2_out    (swapped with 4)  - label not changed
channel 4:  Origami_mod2_in      (swapped with 3)  - label not changed
channel 5:  Micron_wedge_mod1_p
channel 6:  Micron_wedge_mod1_n
channel 7:  Micron_wedge_mod2_p
channel 8:  Micron_wedge_mod2_n
 

The cooling pipes of the two Origami modules are connected in series, respectively.

  25   Tue Sep 28 22:07:16 2010 Markus FriedlBELLEcalcal002 DO NOT USE -> go to cal0038380028.09.2010 22:01:55 

Belle stack (Origami, Micron, Micron, Origami)

now cooling only for Origami, Micron are uncooled

chiller set point: -25°C, measured values on Origami: -10°C

HV=100V, Ibias=38µA, beam off

modified I2C settings for cold modules

temperature monitoring: Origami2 pipes in<->out swapped (to achieve shorter tubes)

 

PROBLEM: Origami n channels are swapped -> USE cal003 INSTEAD!!!

  24   Tue Sep 28 16:50:31 2010 Thomas Bergauercommonserial connection chiller    

 Der chiller braucht ein gekreuztes serielles Kabel!!

  23   Tue Sep 28 15:09:16 2010 Markus FriedlBELLErunrun0054000028.09.2010 15:07:0828.09.2010 20:20:12

previous run stopped due to beam problem (shifted, broad, etc).

now recovered, restarting with same settings.

 

telescope run: 20080

  22   Tue Sep 28 14:48:00 2010 Markus FriedlBELLErunrun004175528.09.2010 14:48:2828.09.2010 15:06:31

same as before, but now pos 1 is located on the other edge (-48mm from center)

telescope 7 / 30 / 277.5

telescope run 20079

  21   Tue Sep 28 14:38:24 2010 Christian IrmlerBELLETemperature sensors Belle stack    

PicoLogic TC-08 temperature sensor assignment Belle stack:

Sensor type: K

channel 1:  Origami_mod1_in
channel 2:  Origami_mod1_out
channel 3:  Origami_mod2_in
channel 4:  Origami_mod2_out
channel 5:  Micron_wedge_mod1_p
channel 6:  Micron_wedge_mod1_n
channel 7:  Micron_wedge_mod2_p
channel 8:  Micron_wedge_mod2_n
 

The cooling pipes of the two Origami modules and that of the Micron modules are connected in series, respectively.

  20   Tue Sep 28 13:04:02 2010 Markus FriedlBELLErunrun0032500028.09.2010 13:00:0528.09.2010 14:41:14

now for real (previous run was at wrong position)

all same as run001, except position now still centered on p-strips, but on high edge (last APVs) for n side

position: 103 / 30 / 277.5

corresponds to telescope run 20078

  19   Tue Sep 28 12:54:33 2010 Markus FriedlBELLErunrun002 28.09.2010 12:46:54 

same as run001 after shifting x by 48mm

103 / 30 / 277.5 ? unsure after crash of xy stage PC

  18   Tue Sep 28 03:06:31 2010 Markus FriedlBELLErunrun00111951628.09.2010 03:06:0428.09.2010 12:18:33

first run with complete Belle stack: 2 x Origami, 2 x Micron

HV=100V  I=49uA

beam is on

chiller is set to 15°C (module temperature is ~17°C)

both Origamis and both Microns are serially cooled

 

position:centered in both axes  55 / 30 / 277.5

 

telescope: run20076 (in zero suppressed mode)

  17   Tue Sep 28 01:13:57 2010 Markus FriedlBELLEcalcal0018380028.09.2010 01:11:20 

first intcal with complete Belle stack: 2 x Origami, 2 x Micron

HV=100V  I=49uA

beam is on

chiller is set to 15°C (module temperature is ~17°C)

both Origamis and both Microns are serially cooled

  16   Mon Sep 27 18:54:47 2010 Thomas BergauerBELLEXY Position    

center position: 55/40/277,5

  15   Mon Sep 27 15:42:09 2010 Thomas BergauercommonTLU: wir stecken auf DUT 3    

TLUControl.exe ist auf zenpixell3 unter /home/eudet/eudaq/bin

TLUControl.exe -d 14 -a 12
-dXX Mask for DUT:
1   abgeschnittenes Dummykabel
2   EUDRB hinten
4   EUDRB vorne
8   DUT3(wir)
-t100 internal trigger
-aXX Mask for Szintis:
1   4 mm (front)
2   4 mm (front)
4   9 mm (back)
8   9 mm (back)
  14   Mon Sep 27 15:41:28 2010 Thomas BergauercommonSzintillatoren    

1: breit  (1)

2: schmal (2)

3: breit  (4)

4: schmal  (8)

 

AND aus beiden breiten: 5

AND aus beiden schmalen: 10

 

  13   Mon Sep 27 15:39:33 2010 Thomas BergauercommonPI-XY Table    

M-521.dd: (links/rechts)

downstream rechts => pos. limit [0]

downstream links => neg. limit [207]

----------------------

M-511.dd: (oben/unten)

oben [102]

unten [0]

----------------------

M-060.dg: (rotation)

parallel beam [7,5]

 

-------------------------------------------

Remote Control:

lokal ssh tunnel starten:
ssh -g -C -L5959:zenpixelw:5900 eudet@eudetmac001.cern.ch

danach mit "Chicken of the VNC" (von lokalem Mac) VNC auf localhost (port 5959). 

  12   Fri Sep 24 12:09:32 2010 Manfred ValentanBELLEgds-file of Micron wafer    
Attachment 1: WaferMicron30.gds
Attachment 2: DSSD_layerproperties.lyp
<?xml version="1.0"?>
<layer-properties>
 <properties>
  <frame-color>#000000</frame-color>
  <fill-color>#000000</fill-color>
  <frame-brightness>0</frame-brightness>
  <fill-brightness>0</fill-brightness>
  <dither-pattern>I9</dither-pattern>
  <visible>true</visible>
  <transparent>false</transparent>
  <width>1</width>
  <marked>false</marked>
  <animation>0</animation>
  <name>0/0@1 Mask dimensions</name>
  <source>0/0@1</source>
 </properties>
 <properties>
  <frame-color/>
  <fill-color/>
  <frame-brightness>0</frame-brightness>
  <fill-brightness>0</fill-brightness>
  <dither-pattern/>
  <visible>true</visible>
  <transparent>false</transparent>
  <width>0</width>
  <marked>false</marked>
  <animation>0</animation>
  <name>p-side (junction)</name>
  <source>*/*@*</source>
  <group-members>
   <frame-color>#01ff6b</frame-color>
   <fill-color>#01ff6b</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I9</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>1/0@1 N+</name>
   <source>1/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#ff0000</frame-color>
   <fill-color>#ff0000</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I9</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>2/0@1 P+</name>
   <source>2/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#ff8000</frame-color>
   <fill-color>#ff8000</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I9</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>3/0@1 Via</name>
   <source>3/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#000080</frame-color>
   <fill-color>#000080</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I9</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>4/0@1 Metal</name>
   <source>4/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#800080</frame-color>
   <fill-color>#800080</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I9</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>5/0@1 Passivation</name>
   <source>5/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#91ff00</frame-color>
   <fill-color>#91ff00</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I9</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>6/0@1 Polysilicon</name>
   <source>6/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#008000</frame-color>
   <fill-color>#008000</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I9</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>7/0@1 Polysilicon Head</name>
   <source>7/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#ff8000</frame-color>
   <fill-color>#ff8000</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I9</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>8/0@1 Via Edge Ring</name>
   <source>8/0@1</source>
  </group-members>
 </properties>
 <properties>
  <frame-color/>
  <fill-color/>
  <frame-brightness>0</frame-brightness>
  <fill-brightness>0</fill-brightness>
  <dither-pattern/>
  <visible>true</visible>
  <transparent>false</transparent>
  <width>0</width>
  <marked>false</marked>
  <animation>0</animation>
  <name>n-side (ohmic)</name>
  <source>*/*@*</source>
  <group-members>
   <frame-color>#01ff6b</frame-color>
   <fill-color>#01ff6b</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I5</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>21/0@1 N+ Back</name>
   <source>21/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#ff0000</frame-color>
   <fill-color>#ff0000</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I5</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>22/0@1 P+ Back</name>
   <source>22/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#ff8000</frame-color>
   <fill-color>#ff8000</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I5</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>23/0@1 Via Back</name>
   <source>23/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#0000ff</frame-color>
   <fill-color>#0000ff</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I5</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>24/0@1 Metal Back</name>
   <source>24/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#800080</frame-color>
   <fill-color>#800080</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I5</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>25/0@1 Passivation Back</name>
   <source>25/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#91ff00</frame-color>
   <fill-color>#91ff00</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I5</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>26/0@1 Polysilicon Back</name>
   <source>26/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#008000</frame-color>
   <fill-color>#008000</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I5</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>27/0@1 Polysilicon Head Back</name>
   <source>27/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#ff8000</frame-color>
   <fill-color>#ff8000</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I5</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>28/0@1 Via Edge Ring Back</name>
   <source>28/0@1</source>
  </group-members>
 </properties>
 <properties>
  <frame-color>#000000</frame-color>
  <fill-color>#000000</fill-color>
  <frame-brightness>0</frame-brightness>
  <fill-brightness>0</fill-brightness>
  <dither-pattern>I9</dither-pattern>
  <visible>true</visible>
  <transparent>false</transparent>
  <width>1</width>
  <marked>false</marked>
  <animation>0</animation>
  <name>100/0@1 Wafer Dimensions</name>
  <source>100/0@1</source>
 </properties>
</layer-properties>
  11   Thu Sep 23 16:23:07 2010 Manfred ValentanMicron BabyModul B2Micron_2826_1_Baby2, DUT (eingeschraenkt) & TRACKING    

p-side: Hybrid 43
APV3: Streifen 9 schlecht

n-side: Hybrid 33
APV4: 0-10 andere Bond-Parameter?, 28&29 erhoehtes noise
APV5: 111-128: 4 schlechte Streifen + common mode correction?

ALS DUT GEEIGNET!
FUER TRACKING GEEIGNET!

 

 

 

 

 

Attachment 1: hardrun_2826_1_type2_pednoise_apv0.png
hardrun_2826_1_type2_pednoise_apv0.png
Attachment 2: hardrun_2826_1_type2_pednoise_apv1.png
hardrun_2826_1_type2_pednoise_apv1.png
Attachment 3: hardrun_2826_1_type2_pednoise_apv2.png
hardrun_2826_1_type2_pednoise_apv2.png
Attachment 4: hardrun_2826_1_type2_pednoise_apv3.png
hardrun_2826_1_type2_pednoise_apv3.png
Attachment 5: hardrun_2826_1_type2_pednoise_apv4.png
hardrun_2826_1_type2_pednoise_apv4.png
Attachment 6: hardrun_2826_1_type2_pednoise_apv5.png
hardrun_2826_1_type2_pednoise_apv5.png
  10   Thu Sep 23 16:22:33 2010 Manfred ValentanMicron BabyModul B2Micron_2826_1_Baby3, TRACKING    

p-side: Hybrid 44
alles ok

n-side: Hybrid 34
APV4: zur Gaenze schlecht, APV-Fehler?
APV5: beide Randstreifen schlecht

FUER TRACKING GEEIGNET!

 

 

 

 

 

Attachment 1: hardrun_single_2826_1_type3_pednoise_apv0.png
hardrun_single_2826_1_type3_pednoise_apv0.png
Attachment 2: hardrun_single_2826_1_type3_pednoise_apv1.png
hardrun_single_2826_1_type3_pednoise_apv1.png
Attachment 3: hardrun_single_2826_1_type3_pednoise_apv2.png
hardrun_single_2826_1_type3_pednoise_apv2.png
Attachment 4: hardrun_single_2826_1_type3_pednoise_apv3.png
hardrun_single_2826_1_type3_pednoise_apv3.png
Attachment 5: hardrun_single_2826_1_type3_pednoise_apv4.png
hardrun_single_2826_1_type3_pednoise_apv4.png
Attachment 6: hardrun_single_2826_1_type3_pednoise_apv5.png
hardrun_single_2826_1_type3_pednoise_apv5.png
  9   Thu Sep 23 16:19:54 2010 Manfred ValentanMicron BabyModul B2Micron_2826_1_Baby4, DUT EINGESCHRAENKT, TRACKING    

p-side: Hybrid 45
APV0: beide Randstreifen schlecht
APV1: Streifen 0 schlecht
APV3: beide Randstreifen etwas schlechter, nicht schlimm

n-side: Hybrid 36
APV4: 0, 9, 40, 79-85, 97, 102, 124 Sensorfehler?
APV5: 0-30 vereinzelt schlechte Streifen, 115-128 Bonds beruehren
 

ALS DUT AUGENZUDRUECKEN GEEIGNET!
FUER TRACKING GEEIGNET!

 

 

Attachment 1: hardrun_single_2826_1_type4_pednoise_apv0.png
hardrun_single_2826_1_type4_pednoise_apv0.png
Attachment 2: hardrun_single_2826_1_type4_pednoise_apv1.png
hardrun_single_2826_1_type4_pednoise_apv1.png
Attachment 3: hardrun_single_2826_1_type4_pednoise_apv2.png
hardrun_single_2826_1_type4_pednoise_apv2.png
Attachment 4: hardrun_single_2826_1_type4_pednoise_apv3.png
hardrun_single_2826_1_type4_pednoise_apv3.png
Attachment 5: hardrun_single_2826_1_type4_pednoise_apv4.png
hardrun_single_2826_1_type4_pednoise_apv4.png
Attachment 6: hardrun_single_2826_1_type4_pednoise_apv5.png
hardrun_single_2826_1_type4_pednoise_apv5.png
ELOG V3.1.5-fc6679b