Home Clean room MedAustron HEPHY testbeams old
testbeam-DESY-Oct2017 testbeam-DESY-April2017 testbeam-SPS2015 testbeam-SPS2014 testbeam-DESY14 testbeam-SPS12 testbeam-SPS11 testbeam-SPS10 testbeam-SPS09 testbeam-SPS08 LP-TPC
  HEPHY logbook for testbeam at SPS September/October 2010, Page 1 of 8  Not logged in ELOG logo
ID Date Author Project Subjectdown Run Number Events StartTime EndTime Text Attachments
  24   Tue Sep 28 16:50:31 2010 Thomas Bergauercommonserial connection chiller     Der chiller braucht ein gekreuztes
serielles Kabel!!
  
  135   Tue May 17 19:08:29 2011 Manfred ValentanMicron Babysensors for source test with intermediate strips    Every second bond of these sensors will
be removed to mimic the effect of an intermediate
strip. For comparison, this is done both
  
  116   Fri Apr 8 13:25:58 2011 Manfred ValentanMicron Babysensors and modules    TRK1: B2Micron_2826_1_baby2
TRK2: B2Micron_2826_1_baby3
DUT3: B2Micron_2826_7_baby2 (common
  
  18   Tue Sep 28 03:06:31 2010 Markus FriedlBELLErunrun00111951628.09.2010 03:06:0428.09.2010 12:18:33first run with complete Belle stack: 2
x Origami, 2 x Micron
HV=100V  I=49uA
  
  19   Tue Sep 28 12:54:33 2010 Markus FriedlBELLErunrun002 28.09.2010 12:46:54 same as run001 after shifting x by 48mm
103 / 30 / 277.5 ? unsure after crash
of xy stage PC
  
  20   Tue Sep 28 13:04:02 2010 Markus FriedlBELLErunrun0032500028.09.2010 13:00:0528.09.2010 14:41:14now for real (previous run was at wrong
position)
all same as run001, except position
  
  22   Tue Sep 28 14:48:00 2010 Markus FriedlBELLErunrun004175528.09.2010 14:48:2828.09.2010 15:06:31same as before, but now pos 1 is located
on the other edge (-48mm from center)
telescope 7 / 30 / 277.5
  
  23   Tue Sep 28 15:09:16 2010 Markus FriedlBELLErunrun0054000028.09.2010 15:07:0828.09.2010 20:20:12previous run stopped due to beam problem
(shifted, broad, etc).
now recovered, restarting with same
  
  27   Tue Sep 28 23:23:47 2010 Markus FriedlBELLErunrun006200328.09.2010 23:13:2228.09.2010 23:22:26channels swapped -> stopped   
  28   Tue Sep 28 23:24:35 2010 Markus FriedlBELLErunrun007146028.09.2010 23:23:2928.09.2010 23:27:54Belle stack: Origami-Micron-Micron-Origami
HV=100V, Ibias=38A, beam on
cooling: Origami only, chiller: -25C,
  
  29   Tue Sep 28 23:29:50 2010 Markus FriedlBELLErunrun00814000028.09.2010 23:29:0129.09.2010 09:36:58Belle stack: Origami-Micron-Micron-Origami
HV=100V, Ibias=38A, beam on
cooling: Origami only, chiller: -25C,
 run008_sensordisplay.jpgrun008_sensordisplay2.jpg 
  31   Wed Sep 29 10:30:59 2010 Markus FriedlBELLErunrun0093000029.09.2010 10:27:2729.09.2010 11:06:35zero suppressed (HIT4) @ FADC
Belle stack: Origami-Micron-Micron-Origami
- HIT4
  
  32   Wed Sep 29 11:09:10 2010 Markus FriedlBELLErunrun0103000029.09.2010 11:08:0329.09.2010 11:50:07zero suppressed (HIT5) @ FADC
Belle stack: Origami-Micron-Micron-Origami
- HIT5
  
  33   Wed Sep 29 11:53:16 2010 Erik HuemerBELLErunrun0111900329.09.2010 12:19:5729.09.2010 14:00:57Belle stack: Origami-Micron-Micron-Origami

HV=100V, Ibias=83.22µA, beam
  
  39   Wed Sep 29 19:01:28 2010 Markus FriedlMicron Babyrunrun012224829.09.2010 18:59:0929.09.2010 19:07:02micron baby stack
HV=100V I=11.0uA
Beam on
  
  40   Wed Sep 29 19:08:56 2010 Markus FriedlMicron Babyrunrun0138985329.09.2010 19:09:5730.09.2010 00:52:39micron baby stack
HV=100V I=11.0uA
Beam on
 run013_hit.png 
  41   Thu Sep 30 00:56:32 2010 Markus FriedlMicron Babyrunrun014100k30.09.2010 00:55:3030.09.2010 11:20:02micron baby stack
 
HV=100V I=11.0uA
  
  43   Thu Sep 30 14:45:16 2010 Thomas BergauerMicron Babyrunrun01522.5k30.09.2010 13:18:1130.09.2010 14:38:01micron baby stack angle scan 15
grad mit 3 modulen
HV=100V, I=3.8uA
  
  45   Thu Sep 30 15:39:53 2010 Markus FriedlMicron Babyrunrun01631k30.09.2010 15:38:2630.09.2010 17:44:36micron baby: 4 DUTs
HV=100V I=10.3uA (start of run); 
I=16.2uA (end of run)
 eventdisplay_schoen.pngevent_display_nichsoschoen.png 
  46   Thu Sep 30 18:12:53 2010 Markus FriedlMicron Babyrunrun0173500030.09.2010 18:11:5330.09.2010 20:22:43micron baby: 4 DUTs
HV=100V I=13.5uA, I_stop=17uA
Beam on
 number_of_clusters_telescope.png 
ELOG V3.1.4-966e3dd