| ID |
Date |
Author |
Subject |
Run Number |
DUT |
Beam Energy |
Rate Setting |
Particle Type |
Events |
Data |
Beam Betatron |
Beam Chopper |
Beam Degrader |
Beam EFE |
Beam Orb |
Beam QuadScan |
PhantomType |
PhantomAngle |
|
81
|
Sat Feb 27 09:40:15 2021 |
Felix Ulrich-Pur | Rate verification | 7 | SiC+Si+RaMon | 62.4 | I(EFE+SID0) | | | Good | | | | | | | | |
Start 07:40
rate looks fine, however operators mentioned, that CPD data might have been loaded incorrectly-->pause during run and reloaded (07:48), rate seems unchanged
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.475V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x: 0
y: 0
|
|
82
|
Sat Feb 27 09:41:06 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 8 | SiC+Si+RaMon | 252.7 | I(EFE+SID0) | | | Good | | | | | | | | |
08:34 room request, PC for SiC had to be restarted, trigger were connected as prior to shift
Start 08:53
rate looks fine
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.475V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
verändere Position, ab 7:49 bei Aufnahme von Waveforms Position:
x = 0
y = 0
7:51 verändere Position
7:58 neue Position:
x = 8
y = 68
FPGA shutdown --> Datenaufzeichnung bis etwa 8:27, ab dann Suchen des Fehlers
|
|
83
|
Sat Feb 27 09:42:44 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 9 | SiC+Si+RaMon | 145.4 | I(EFE+SID0) | | | Good | | | | | | | | |
Start 09:37
SiC setrup had to be rewired (wr0ng polarity somewhere (insert here))
Umstellen:
channel 2: LVDS-Signal vertauschen
channel 2 Referenz: 2.100 V
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.475V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68 |
|
84
|
Sat Feb 27 18:36:15 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 10 | SiC+Si+RaMon | 145.4 | I(EFE+SID0) | | | Good | | | | | | | | |
Start 10:10
polarity now correct
Wiederholung von vorher, aber keine Aufnahme von neuen Waveforms
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.100 V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68 |
|
85
|
Sat Feb 27 18:38:09 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 11 | SiC+Si+RaMon | 62.4 | I(EFE+SID0) | | | Good | | | | | | | | |
Start 10:24
polarity now correct
no signal in sic --> energy too low due to scintis
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.100 V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68 |
|
86
|
Sat Feb 27 18:38:54 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 12 | SiC+Si+RaMon | 252.7 | I(EFE+SID0) | | | Good | | | | | | | | |
Start 10:28
polarity now correct
now signal in SiC
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.100 V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68 |
|
87
|
Sat Feb 27 18:42:13 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 13 | SiC+Si+RaMon | 252.7 | III(EFE+SID2) | | | Good | | | | | | | | |
Start 10:38
no signal in SiC
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.100 V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68 |
|
88
|
Sat Feb 27 18:43:12 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 14 | SiC+Si+RaMon | 145.4 | III(EFE+SID2) | | | Good | | | | | | | | |
Start 10:47
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.100 V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68 |
|
89
|
Sat Feb 27 18:43:35 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 15 | SiC+Si+RaMon | 100.4 | III(EFE+SID2) | | | Good | | | | | | | | |
Start 11:09
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.100 V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68 |
|
90
|
Sat Feb 27 18:44:06 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 16 | SiC+Si+RaMon | 100.4 | I(EFE+SID0) | | | Good | | | | | | | | |
Start 11:36
schöne Signale
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.100 V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68 |
|
91
|
Sat Feb 27 18:44:23 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 17 | SiC+Si+RaMon | 800 | VII | | | Good | | | | | | | | |
Start 11:55
Stopped at 12:05-->acc failure
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.100 V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68 |
|
92
|
Sat Feb 27 18:49:06 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 18 | SiC+Si+RaMon | 800 | VII | | | Good | | | | | | | | |
Start 12:39
Neustart der vorherigen Messung
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.100 V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68 |
|
93
|
Sat Feb 27 18:50:16 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 19 | SiC+Si+RaMon | 252.7 | nominal | | | Good | | | 100 | | | | | |
Start 13:40
Degrader 100
Messung aufgenommen, keine Screenshots
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.100 V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68 |
|
94
|
Sat Feb 27 18:52:12 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 20 | SiC+Si+RaMon | 252.7 | nominal | Proton | | Good | | | 10 | | | | | |
Start 13:42
Degrader 10
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.100 V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68 |
|
95
|
Sat Feb 27 18:56:11 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 21 | SiC+Si+RaMon | 252.7 | nominal | Proton | | Good | | | 50 | | | | | |
Start 13:56
Degrader 50
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.100 V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68
|
|
96
|
Sat Feb 27 18:56:58 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 22 | SiC+Si+RaMon | 252.7 | nominal | Proton | | Good | | | 100 | | | | | |
Start 14:08
Degrader 100
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.100 V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68 |
|
97
|
Sat Feb 27 19:01:26 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 23 | SiC+Si+RaMon | 400.8 | nominal | Carbon | | Good | | | 10 | | | | | |
Start 14:18
14:30 enter room request: abbau and shielding was activated, called RP, removed SiC+Si Setup+Al shielding of DSSDs
Degrader 10, Carbon
Messung bis 14:24
danach neue Aufzeichnung (Hintergrundstrahlung) Start ca 14:25
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.100 V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68 |
|
98
|
Sat Feb 27 19:06:07 2021 |
Felix Ulrich-Pur | Local Runs DSSDs+SiC | 50-56 | SiC+DSSD tracker | Noise | nominal | | | Good | | | | | | | | |
Start 16:15:
Final MT=1, final BSY length =500 (2kHz) |
|
99
|
Sat Feb 27 19:07:42 2021 |
Felix Ulrich-Pur | HV Scan DSSD+SiC | 57 | SiC+DSSD tracker | 100.4 | II(BETA+EFE) | Proton | | Good | | | | | | | | |
Start 16:46:
Final MT=1, final BSY length =500 (2kHz), Trigger latency 40 (not optimal) |
|
100
|
Sat Feb 27 19:08:51 2021 |
Felix Ulrich-Pur | HV Scan DSSD+SiC | 58 | SiC+DSSD tracker | 100.4 | II(BETA+EFE) | Proton | | Good | | | | | | | | |
Start 16:50:
Final MT=1, final BSY length =500 (2kHz), Trigger latency 41 optimal
HV 100V |