Home CMS Production Clean room MedAustron HEPHY testbeams old
electronics module assembly SiDDaTA scratch
  HEPHY logbook of the Electronics Group, Page 1 of 4  Not logged in ELOG logo
ID Date Author Project Measurement Type Object IDup Subject Text Attachments
  37   Tue May 19 09:31:50 2015 Hao Yin   Noise Test ITAEverything works except L3 p-side.

The config file is shown in the
following:
  
  38   Tue May 19 10:08:53 2015 Hao Yin   FADC system setup success3 FADC. All Channel/APV25 running (except
L3 n first and last -> not connected (bonding))

n-side: all connectors
  
  42   Tue May 19 13:42:04 2015 Hao Yin   L6 Noise inJection SetupTest Nr. 1:

RLC between DockBox and Hybrid
(both side).
 P1000702.JPGP1000700.JPGP1000699.JPGP1000703.JPGP1000707.JPG 
  44   Wed May 20 10:12:12 2015 Hao Yin   Ladder RLC test (CMC Injection)L5 Ladder Test

folder: /mnt/data/ITA_NOISE_TESTS/Ladder_test

Setup: ladder
  
  45   Thu May 21 18:23:22 2015 Hao Yin   Noise Injection LV cable(TestNr. 15)

injecting sin wave into LV at different
 P1000717.JPG 
  46   Fri May 22 12:01:32 2015 Hao Yin   CMC injection LV 10VComparison w/o filter (LC) connected to
-z_n side.

Mateo has the results.
  
  51   Mon Nov 30 15:12:19 2015 Hao Yin   FIR_ADC configFIR filter and ADC delay test:
ADC delay and FIR filter with and
without cooling to reproduce error detected
  
  15   Wed Oct 7 14:23:35 2009 Dieter UhlBELLE Upgradehybrid#4hybrid-pitchadapteropens at upper coat
 pitchadapter4_lower_coat.gifpitchadapter4_lower_coat_opens.gifpitchadapter4_upper_coat.gifpitchadapter4_upper_coat_opens.gif 
  16   Wed Oct 7 14:24:06 2009 Dieter UhlBELLE Upgradehybrid#5hybrid-pitchadaptershorts at upper coat
 pitchadapter5_lower_coat_opens.gifpitchadapter5_lower_coat.gifpitchadapter5_upper_coat_opens.gifpitchadapter5_upper_coat.gif 
  57   Mon Nov 30 18:32:13 2015 Hao YinBelle IIsystemADC Delay Scan Cold ADC Cold diff to hot: 1-3 adc delay config
(max 1.5 ns)
  
  52   Mon Nov 30 15:18:12 2015 Hao YinBelle IImoduleADC_DELAY_HOTADC delay hotADC delay scan at room temp and 20 min
after APV I2C config.

measured values at display in the
  
  49   Wed May 27 09:30:54 2015 Hao YinBelle IIsystemCAEN PS Primary side Measured Primary side of caen wo load (setup
attachment 2 and prelimilary res. attachment
1. )
 P1000776.JPGP1000774.JPGP1000777.JPGP1000780.JPG 
  48   Mon May 25 20:27:23 2015 Hao YinBelle IIsystemCaen PS base line measurements Baseline noise measurements wo injection.

measure noise in both HV and LV.

wings of APV25 using cmc with 128
 P1000760.JPGP1000758.JPG 
  41   Tue May 19 13:23:16 2015 Hao YinBelle IIsystemCalibrationCalibrationRun001PedestalRun001, FIRRun001,

room temperature,

no noise injection
  
  39   Tue May 19 10:57:19 2015 Hao YinBelle IIsystemFIRFIR filterfirst fir filter run:

# 1:[0x[FADC ID] in hex], 2:[APV25
ChannelNr], 3-10:[fir coef in float]
  
  53   Mon Nov 30 17:11:17 2015 Hao YinBelle IImoduleFIRRun001FIRRun001 aft ADC_HOTFirRun 20 min after I2C   
  58   Mon Nov 30 18:44:04 2015 Hao YinBelle IIsystemFIRRun_Cold ADC Cold diff to hot: 1-3 adc delay config
(max 1.5 ns)

 
  
  55   Mon Nov 30 17:23:51 2015 Hao YinBelle IIsystemHardwareRun001 ADC Hot, FIRRun001, PedestalRun001

room temp pedrun

target: BW
 Room_bw_n.pngRoom_bw_p.png 
  56   Mon Nov 30 17:47:54 2015 Hao YinBelle IIsystemHardwareRun002 ADC Hot, FIRRun001, PedestalRun001

target: -Z

room temp pedrun
 Room_-z_n.pngRoom_-z_p.png 
  60   Mon Nov 30 18:49:23 2015 Hao YinBelle IIsystemHardware_Cold ADC Cold diff to hot: 1-3 adc delay config
(max 1.5 ns), FIRRun_Cold_001

target: -Z
 Cold_-z_n.pngCold_-z_p.png 
ELOG V3.1.5-fc6679b