| ID |
Date |
Author |
Project |
Subject |
Run Number |
Events |
XYPosition |
Cooling |
Data |
|
71
|
Tue Jun 9 20:27:55 2015 |
Benedikt Würkner | SVD3 (H6B) | Hardware FEI4 | 68 | 503505 | 8 | No | Unknown |
RUN WITH SVD3, telescope and FEI4
EUDET Run 68
Mimosa Threshold 6
Pos 8: x=136.08 mm, y= 79 mm (narrow side center) |
|
73
|
Tue Jun 9 20:32:46 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 008 | 10000 | | No | Good |
Room temp, fir004 |
|
74
|
Tue Jun 9 20:36:39 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 020 | 62k | | No | Good |
room temp
FIRRun004, PedestalRun008
telescope alignment |
|
75
|
Wed Jun 10 10:40:24 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 004 | | | No | Good |
room temp
pedestalrun 008
FIRRun004
max frame pos = 0. frame
[six]
lvl = 20, 30
lat = 95
sam = 20
grp = 8 |
|
76
|
Wed Jun 10 11:19:33 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 005 | | | No | Good |
room temp
pedestalrun 008
FIRRun004
max frame pos = 0. frame
[six]
lvl = 20, 30
lat = 96
sam = 20
grp = 8 |
|
77
|
Wed Jun 10 12:03:53 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 006 | | | No | Good |
room temp
pedestalrun 008
FIRRun004
max frame pos = 1-2-3. frame n side still shifted
[six]
lvl = 20, 30
lat = 97
sam = 20
grp = 8 |
|
78
|
Wed Jun 10 12:04:27 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 007 | | | No | Good |
room temp
pedestalrun 008
FIRRun004
max frame pos = 1-2-3. frame n side still shifted
[six]
lvl = 20, 30
lat = 98
sam = 20
grp = 8 |
|
80
|
Wed Jun 10 18:05:03 2015 |
Benedikt Würkner | SVD3 (H6B) | FEI4 configuration | | | | No | Unknown |
There are two planes, one fixed upstream and one fixed downstream.
CIS3WII_6 upstream and CIS2WI_IBL2 downstream.
They are configured using the pc in H6B which can be accessed via microsoft remote desktop from the network 192.168.5.x using the ip 192.168.5.6.
The configuration files can be found in the folder "E:\ConfigurationCMS\" on the server and are named after the modules.
Only one of the FEI4 detectors can be used at a time since they are of different generations (FEI4A and FEI4B) which can't be used at the same time with the available USB board. vnc
The configuration for EUDAQ needs to be adapted for the used module by changing the name of the configuration file.
[Producer.USBpixI4]
SRAM_READOUT_AT = 5
SkipConfiguration = no
UseSingleBoardConfig = no
boards = 230
modules[230] = 1
#upstream
config_file = E:\ConfigurationCMS\CIS3_W11_06_thr1600_7to21ke_modified.cfg.root
#downstream:
#config_file = E:\ConfigurationCMS\CIS2_W02_IBL1_thr1600_7to14_modified.cfg.root
fpga_firmware = E:\icwiki_svn\USBPixI4\host\tags\release-5.3\config\usbpixi4.bit
lvl1_delay = 16
tlu_trigger_data_delay = 10
In my experience switching between the planes also requires a restart of the USBPix DAQ because apparently something is not working with the reload of a different config file afterwards. I had the phenomenon that the DAQ responded like it was working but the datastream was empty. Therefore always check the online monitor for hitmaps. |
|
82
|
Wed Jun 10 19:05:04 2015 |
Benedikt Würkner | SVD3 (H6B) | Hardware FEI4 | 71 | 50000 | 1 | No | Unknown |
RUN WITH SVD3, telescope and FEI4
EUDET Run 71
Mimosa Threshold 6
Pos 1: x=100 mm, y=79 mm (Hits in APV 3 und 8-9 in p-Seite und 14 und 17 in n-Seite )
Downstream FEI4 used |
|
84
|
Wed Jun 10 20:54:36 2015 |
Benedikt Würkner | SVD3 (H6B) | Residuals FE-I4 (Upstream) | 59 | | 10 | No | Good |
|
| Attachment 1: run000059-fitter-residuals.pdf
|
|
85
|
Wed Jun 10 21:36:25 2015 |
Benedikt Würkner | SVD3 (H6B) | Horizontal Beam Profile Run | 72 | 50000 | 1 | No | Good |
Trying to get a nice plot of the beam profile by only using the and 3 (horizontal) see http://elog.hephy.at/testbeam-SPS2015/66 for details.
Pos 1: x=100 mm, y=79 mm (Hits in APV 3 und 8-9 in p-Seite und 14 und 17 in n-Seite )
Producer.TLU Config Change:
|
| Attachment 1: HW_072_002_Result.pdf
|
| Attachment 2: HW_072_003_Result.pdf
|
| Attachment 3: HW_072_000_Result.pdf
|
| Attachment 4: HW_072_001_Result.pdf
|
|
88
|
Thu Jun 11 15:56:32 2015 |
Benedikt Würkner | SVD3 (H6B) | Hardware FEI4 | 73 | 20000 | 7 | No | Unknown |
RUN WITH SVD3, telescope and FEI4
EUDET Run 73
Mimosa Threshold 6
Pos 7: x= 30.5 mm, y= 79 mm (wide side center)
Upstream FEI4 used, checking if alignment change helped |
|
91
|
Thu Jun 11 17:11:40 2015 |
Benedikt Würkner | SVD3 (H6B) | Hardware FEI4 | 74 | 20000 | 8 | No | Unknown |
RUN WITH SVD3, telescope and FEI4
EUDET Run 74
Mimosa Threshold 6
Pos 8: x=136.08 mm, y= 79 mm (narrow side center)
Upstream FEI4 used |
|
95
|
Fri Jun 12 16:52:52 2015 |
Benedikt Würkner | SVD3 (H6B) | Telescope without DUT | 76 | ~30k | | No | Good |
Threshold 6
Testrun to see how the telescope behaves without a DUT to test if there is an increased amount of multiple scattering after the aluminum planes of the FW and BW module.
|
| Attachment 1: Telescope_without_DUT.png
|
 |
|
96
|
Fri Jun 12 17:00:18 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 011 | 10000 | | No | Good |
cooled pedestal vaules for long sixlet cal |
|
97
|
Fri Jun 12 17:03:02 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 012 | 10000 | | No | Good |
room temp
FIRRun002
|
|
98
|
Fri Jun 12 17:08:23 2015 |
Benedikt Würkner | SVD3 (H6B) | Telescope with FEI4 | 80 | ~30k | | No | Good |
Threshold 6
Testrun to see how the telescope behaves without a DUT to test if there is an increased amount of multiple scattering after the aluminum planes of the FW and BW module.
This time with the upstream FEI4 plane |
|
99
|
Fri Jun 12 17:11:45 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 026 | 50k | 1 | No | Good |
room temp
FIRRun002,
PedestalRun012,
CalibrationRun003
L3 rotated.
taget: bw, pos 1
|
|
100
|
Sat Jun 13 09:09:37 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 027 | ~200k | 2 | No | Good |
room temp
FIRRun002,
PedestalRun012,
CalibrationRun003
L3 rotated.
taget: CE, pos 1
|
|
101
|
Sat Jun 13 10:07:36 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 028 | 50k | 4 | No | Good |
room temp
FIRRun002,
PedestalRun012,
CalibrationRun003
L3 rotated.
taget: FW, pos 4
|