ID |
Date |
Author |
Project |
Subject |
Run Number |
Events |
XYPosition![up up](up.png) |
Cooling |
Data |
29
|
Sun Jun 7 11:38:04 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run with TLU and Telescope | hw007 | 15000 | | | Good |
TLU Run 46
Threshold 8b
Offset 601 |
30
|
Sun Jun 7 12:10:24 2015 |
Benedikt Würkner | SVD3 (H6B) | Telescope Threshold8b test run | 0046 | 14399 | | | Unknown |
Telescope in combination with SVD3 |
31
|
Sun Jun 7 12:11:42 2015 |
Benedikt Würkner | SVD3 (H6B) | Telescope Threshold7 test run | 0047 | 38175 | | | Unknown |
Telescope alone |
32
|
Sun Jun 7 12:12:00 2015 |
Benedikt Würkner | SVD3 (H6B) | Telescope Threshold7 test run | 0048 | 53356 | | | Unknown |
Telescope alone |
34
|
Sun Jun 7 13:19:19 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 010 | | | | Good |
cooled
FIRRun002, PedestalRun006 (temp enty)
target: BW, pos 1 |
35
|
Sun Jun 7 13:21:15 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 011 | 50000 | | | Good |
cooled (see attachment)
FIRRun002, PedestalRun006
target: -Z, pos 2 |
Attachment 1: Pos2.PNG
|
![Pos2.PNG Pos2.PNG](../testbeam-SPS2015/150607_132400/Pos2.PNG) |
36
|
Sun Jun 7 14:44:29 2015 |
Thomas Bergauer | SVD3 (H6B) | XY Stage and DUT Positions | | | | | Unknown |
Coordinate system:
pos x-Direction = Jura side
pos y-Direction = Down
Zero-point is in the top right corner in Beam direction
absolute Position of PI Stages:
Pos 1: x=100 mm, y=79 mm (Hits in APV 3 und 8-9 in p-Seite und 14 und 17 in n-Seite )
Pos 2: x=69.3 mm, y=79 mm (Hits in APV 3-4 und 8-9 in p-Seite und 13 und 18 in n-Seite)
Pos 3: x=38.6 mm, y=84 mm
Pos 4: x=130.7 mm, y=84 mm
Pos 5: x=30.5 mm, y= 99.74 mm (wide side top)
Pos 6: x=136.08 mm, y= 91.49 mm (narrow side top)
Pos 7: x= 30.5 mm, y= 79 mm (wide side center)
Pos 8: x=136.08 mm, y= 79 mm (narrow side center)
Pos 9: x=30.5 mm, y= 60.67 mm (wide side down)
Pos 10: x= 136.08mm, y=68.9 mm (narrow side down) |
Attachment 1: FWD-BWD.PNG
|
![FWD-BWD.PNG FWD-BWD.PNG](../testbeam-SPS2015/150607_152826/FWD-BWD.PNG) |
Attachment 2: apv-numbering.jpg
|
![apv-numbering.jpg apv-numbering.jpg](../testbeam-SPS2015/150608_120701/apv-numbering.jpg) |
Attachment 3: FWD-BWD_Bemaßung.PNG
|
![FWD-BWD_Bemaßung.PNG FWD-BWD_Bemaßung.PNG](../testbeam-SPS2015/150608_163022/FWD-BWD_Bema%C3%9Fung.PNG) |
38
|
Sun Jun 7 15:59:05 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 012 | 50000 | | | Unknown |
cooled (see attachment)
FIRRun002, PedestalRun006
target: CE, pos 2
cooling box emergency break ... ie about the last 1-10 k not useable. |
Attachment 1: Pos3.PNG
|
![Pos3.PNG Pos3.PNG](../testbeam-SPS2015/150607_160138/Pos3.PNG) |
39
|
Sun Jun 7 20:02:40 2015 |
Hao Yin | Belle II FADC (H6A) | Cooling Box Emergency break | | | | | Unknown |
Something triggered a emergency break. HWRun012 only last 1-10k event has to be discarded. |
43
|
Sun Jun 7 23:04:06 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 013 | 50000 | | | Good |
cooled (see attachment)
FIRRun002, PedestalRun006
target: CE, pos 3
cooling box emergency break ... ie about the last 1-10 k not useable. |
44
|
Sun Jun 7 23:09:29 2015 |
Hao Yin | Belle II FADC (H6A) | Hardware | 014 | 224k | | | Good |
cooled (see attachment) in - 20,5 out -7,8
FIRRun002, PedestalRun006
target: fw, pos 4 |
Attachment 1: Pos4.png
|
![Pos4.png Pos4.png](../testbeam-SPS2015/150608_115345/Pos4.png) |
50
|
Mon Jun 8 11:33:24 2015 |
Thomas Bergauer | common | beam profile | | | | | Unknown |
120GeV hadrons, beam config H6A.BELLE.003 |
Attachment 1: Beamprofile.png
|
![Beamprofile.png Beamprofile.png](../testbeam-SPS2015/150608_113303/Beamprofile.png) |
53
|
Mon Jun 8 15:03:53 2015 |
Benedikt Würkner | SVD3 (H6B) | hardware run with TLU and FEI4 WORKING | 59 | 19000 | | | Unknown |
Testrun with the FEI4 working for the first time.
Lessons learned about the configuration:
EnableDUTVeto needs to be set for the FEI4 to allow it to work
HandShakeMode needs to be enabled for the FEI4 as well
"Enable RJ45 input during scans" needs to be enabled for the USB-controller |
56
|
Mon Jun 8 16:53:13 2015 |
Benedikt Würkner | SVD3 (H6B) | EUTelescope Fitter not working investigation | | | | | Unknown |
Apparently every problem can be attributed to a misalignment problem. The telescope has troubles with heavily misaligned DUTs. Was resolved by creating different gear-files for each run with pretty precise coordinates of the DUT position calculated for the telescope coordinate system.
Additionally one has to watch out for misaligned planes of the telescope itself. It was required to allow for more than 2mm offset for the telescope planes behind the DUTs. This can be easily checked by looking at the PreAligner plots in the -hitmaker-histo.root file.
It look something like this:
![](150609_105102/nice-alignment.png.png)
and not like this:
![](150609_105147/bad-alignment.png.png)
Run number |
offset value |
Comment |
49 |
-1 |
|
50 |
-1 |
Expected default value. EORE=49401 |
51 |
-1 |
Expected default value. EORE=49400 |
52 |
-1 |
Checked -1 EORE= 49401 |
53 |
-1 |
Checked -1 EORE= 49401 |
54 |
-1 |
Checked -1 EORE= 119401, |
55 |
-1 |
Checked -1 EORE= 409388 |
56 |
-1 |
Checked -1 EORE= 49392 |
57 |
-1 |
Checked -1 EORE= 49377 |
58 |
-1 |
Checked -1 EORE= 49397 |
Run |
Position |
x-Table |
x-telescope FW |
x-telescope BW |
49 |
1 |
100 |
-13,7 |
-16,7 |
50 |
2 |
69,3 |
17 |
14 |
51 |
3 |
38,6 |
47,7 |
44,7 |
52 |
4 |
130,7 |
-44,4 |
-47,4 |
53 |
5 |
30,5 |
55,8 |
52,8 |
54 |
6 |
136,8 |
-50,5 |
-53,5 |
55 |
7 |
30,5 |
55,8 |
52,8 |
56 |
8 |
136,8 |
-50,5 |
-53,5 |
57 |
9 |
30,5 |
55,8 |
52,8 |
58 |
10 |
136,8 |
-50,5 |
-53,5 |
|
Attachment 2: bad-alignment.png
|
![bad-alignment.png bad-alignment.png](../testbeam-SPS2015/150609_105255/bad-alignment.png) |
58
|
Mon Jun 8 18:08:49 2015 |
Thomas Bergauer | SVD3 (H6B) | Telescope online monitor | | | | | Unknown |
a working version of the EUDET online monitor (which works also with the FE-I4) is at the following location
~/BELLETEST/eudaq-neu/build/monitors/onlinemon$ ./OnlineMon.exe -sc 0 -f /home/telescope/eudaq/data/run000060.raw |
62
|
Tue Jun 9 09:32:41 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 007 | 10000 | | | Good |
Room temp, fir002 |
63
|
Tue Jun 9 09:33:33 2015 |
Hao Yin | Belle II FADC (H6A) | Calibration | 003 | | | | Good |
room temp
FIRRun002,
pedestalrun006;
pedestalrun007
|
66
|
Tue Jun 9 10:01:03 2015 |
Lukas Bulla | SVD3 (H6B) | TLU setup info | | | | | Unknown |
Channels:
- Upstream vertical -> channel 0; (bitmask 1)
- Upstream horizontal -> channel 1; (bitmask 2)
- Downstream vertical -> channel 2; (bitmask 4)
- Downstream horizontal ->channel 3; (bitmask 8)
TLU DuT interface:
DUT Interface |
Bitmask |
DAQ |
1 |
1 |
Mimosa (EUDET Telescope) |
2 |
2 |
leer |
3 |
4 |
SVD3 |
4 |
8 |
FE-I4 |
|
Attachment 1: upstream.jpg
|
![upstream.jpg upstream.jpg](../testbeam-SPS2015/150609_095546/upstream.jpg) |
Attachment 2: downstream.jpg
|
![downstream.jpg downstream.jpg](../testbeam-SPS2015/150609_095803/downstream.jpg) |
72
|
Tue Jun 9 20:30:37 2015 |
Hao Yin | Belle II FADC (H6A) | FIR | 004 | | | | Good |
FIR filer and ADC delay with all sensor and telescope.
Telescope alignment |
73
|
Tue Jun 9 20:32:46 2015 |
Hao Yin | Belle II FADC (H6A) | Pedestal | 008 | 10000 | | No | Good |
Room temp, fir004 |