| ID |
Date |
Author |
Project |
Subject |
Run Number |
Events |
XYPosition |
Cooling |
Data |
|
67
|
Tue Jun 9 11:20:25 2015 |
Benedikt Würkner | SVD3 (H6B) | Vertical Beam Profile Run | 65 | 50000 | 2 | No | Unknown |
Trying to get a nice plot of the beam profile by only using the vertical PMTs (number 0 and 2) see http://elog.hephy.at/testbeam-SPS2015/66 for details.
Pos 2: x=69.3 mm, y=79 mm (Hits in APV 3-4 und 8-9 in p-Seite und 13 und 18 in n-Seite)
Producer.TLU Config Change:
|
|
69
|
Tue Jun 9 14:33:50 2015 |
Benedikt Würkner | SVD3 (H6B) | Vertical Beam Profile Run | 67 | 50000 | 2 | No | Unknown |
Trying to get a nice plot of the beam profile by only using the vertical PMT 0 (upstream vertical, the long one) see http://elog.hephy.at/testbeam-SPS2015/66 for details.
Pos 2: x=69.3 mm, y=79 mm (Hits in APV 3-4 und 8-9 in p-Seite und 13 und 18 in n-Seite)
Producer.TLU Config Change:
|
|
95
|
Fri Jun 12 16:52:52 2015 |
Benedikt Würkner | SVD3 (H6B) | Telescope without DUT | 76 | ~30k | | No | Good |
Threshold 6
Testrun to see how the telescope behaves without a DUT to test if there is an increased amount of multiple scattering after the aluminum planes of the FW and BW module.
|
| Attachment 1: Telescope_without_DUT.png
|
 |
|
98
|
Fri Jun 12 17:08:23 2015 |
Benedikt Würkner | SVD3 (H6B) | Telescope with FEI4 | 80 | ~30k | | No | Good |
Threshold 6
Testrun to see how the telescope behaves without a DUT to test if there is an increased amount of multiple scattering after the aluminum planes of the FW and BW module.
This time with the upstream FEI4 plane |
|
58
|
Mon Jun 8 18:08:49 2015 |
Thomas Bergauer | SVD3 (H6B) | Telescope online monitor | | | | | Unknown |
a working version of the EUDET online monitor (which works also with the FE-I4) is at the following location
~/BELLETEST/eudaq-neu/build/monitors/onlinemon$ ./OnlineMon.exe -sc 0 -f /home/telescope/eudaq/data/run000060.raw |
|
30
|
Sun Jun 7 12:10:24 2015 |
Benedikt Würkner | SVD3 (H6B) | Telescope Threshold8b test run | 0046 | 14399 | | | Unknown |
Telescope in combination with SVD3 |
|
31
|
Sun Jun 7 12:11:42 2015 |
Benedikt Würkner | SVD3 (H6B) | Telescope Threshold7 test run | 0047 | 38175 | | | Unknown |
Telescope alone |
|
32
|
Sun Jun 7 12:12:00 2015 |
Benedikt Würkner | SVD3 (H6B) | Telescope Threshold7 test run | 0048 | 53356 | | | Unknown |
Telescope alone |
|
66
|
Tue Jun 9 10:01:03 2015 |
Lukas Bulla | SVD3 (H6B) | TLU setup info | | | | | Unknown |
Channels:
- Upstream vertical -> channel 0; (bitmask 1)
- Upstream horizontal -> channel 1; (bitmask 2)
- Downstream vertical -> channel 2; (bitmask 4)
- Downstream horizontal ->channel 3; (bitmask 8)
TLU DuT interface:
| DUT Interface |
Bitmask |
DAQ |
| 1 |
1 |
Mimosa (EUDET Telescope) |
| 2 |
2 |
leer |
| 3 |
4 |
SVD3 |
| 4 |
8 |
FE-I4 |
|
| Attachment 1: upstream.jpg
|
 |
| Attachment 2: downstream.jpg
|
 |
|
12
|
Fri Jun 5 12:02:29 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 001 | | | | Good |
room temp max subevent at 2. with lat = 96 |
|
13
|
Fri Jun 5 12:03:34 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 002 | | | | Good |
lat = 97 to a greater range of lat scan |
|
14
|
Fri Jun 5 19:55:00 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 003 | | | | Unknown |
lat = 98
room temp
pedestalrun 003 |
|
75
|
Wed Jun 10 10:40:24 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 004 | | | No | Good |
room temp
pedestalrun 008
FIRRun004
max frame pos = 0. frame
[six]
lvl = 20, 30
lat = 95
sam = 20
grp = 8 |
|
76
|
Wed Jun 10 11:19:33 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 005 | | | No | Good |
room temp
pedestalrun 008
FIRRun004
max frame pos = 0. frame
[six]
lvl = 20, 30
lat = 96
sam = 20
grp = 8 |
|
77
|
Wed Jun 10 12:03:53 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 006 | | | No | Good |
room temp
pedestalrun 008
FIRRun004
max frame pos = 1-2-3. frame n side still shifted
[six]
lvl = 20, 30
lat = 97
sam = 20
grp = 8 |
|
78
|
Wed Jun 10 12:04:27 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 007 | | | No | Good |
room temp
pedestalrun 008
FIRRun004
max frame pos = 1-2-3. frame n side still shifted
[six]
lvl = 20, 30
lat = 98
sam = 20
grp = 8 |
|
79
|
Wed Jun 10 13:12:33 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 010 | | | Yes | Good |
cooled
pedestalrun 008
FIRRun004
max frame pos = 1-2-3. frame n side still shifted
[six]
lvl = 15, 35
lat = 96
sam = 50
grp = 8 |
|
86
|
Thu Jun 11 11:41:50 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 011 | | | Yes | Good |
cooled
pedestalrun 008
FIRRun004
max frame pos = 1-2-3. frame n side still shifted
[six]
lvl = 15, 35
lat = 96
sam = 50
grp = 8 |
|
87
|
Thu Jun 11 11:42:39 2015 |
Hao Yin | Belle II FADC (H6A) | Sixlet Calibration | 012 | | | Yes | Good |
cooled until about 400k after that room temp
pedestalrun 009
FIRRun005
sixlet calibration run with only ladders
[six]
lvl = 0, 255
lat = 97
sam = 50
grp = 8 |
|
1
|
Tue May 12 10:27:39 2015 |
Benedikt Würkner | SVD3 (H6B) | Setup information | | | | | Unknown |
Information concerning the SVD3 setup during a beam test
In the beam area setup the whole crate and the power supply with the usual spider cable and the two Keithly 2410 high voltage supplies. Monitoring of the 2410 happens via a NI MAX interface that connects to the GPIB-Ethernet interface and needs to be configured there. The IP and password are noted on the device. The software can be found on heros in medialib/LONGTERM/longterm R3.1_doubleSided as a normal *.vi file.
Default adresses 16 and 17 as defined in labview, need to figure out on site which is which, if the voltage selected (e.g. 100V) is applied as +50/-50 or if it is applied as +100/-100 before connecting the cables.
Take a run without dut as well to check the telescope integrity. Without dut in beamline!!!!! |
| Attachment 1: spider-config.jpg
|
 |