ELOG testbeam-SPS12

Home CMS Production Clean room MedAustron HEPHY testbeams old

testbeam-rd50-desy-Oct2024 testbeam-RD50-DESY-Apr2024 testbeam-RD50-DESY-Jul2023 testbeam-RD50-CERN-Oct2022 testbeam-DESY-Oct2017 testbeam-DESY-April2017 testbeam-SPS2015 testbeam-SPS2014 testbeam-DESY14 testbeam-SPS12 testbeam-SPS11 testbeam-SPS10 testbeam-SPS09 testbeam-SPS08 LP-TPC

HEPHY logbook for testbeam at SPS October 2012 and Irradiation Mol, Page 1 of 4

Not logged in

Find | Login | Help

New entries since:

Thu Jan 1 01:00:00 1970

Full | Summary | Threaded | Hide attachments

80 Entries

Goto page 1, 2, 3, 4 Next All

ID	Date	Author	Project	Subject	Run Number	Events	StartTime	EndTime	Data
80	Wed Oct 31 15:54:59 2012	Christian Irmler	common	Ethernetkabel zu H6A					Unknown
Ethernetkabel HNA447 -> H6A: Das obere Ende im Counting Hut liegt im Zwischenboden unterhalb der orangenen Steckdose beim Eingang mit dem elektronischen Zahlenschloß. Das untere Ende in der Zone hängt aufgerollt an einem Pfeiler der Kabeltasse, unweit der Stelle an der das Kabel von oben hinunter gelassen wurden. Das ist ewta dort wo die Stiege zu PPE146 endet. siehe Fotos :)
Attachment 1: 2012-10-31_15.47.42.jpg

Attachment 2: 2012-10-31_12.28.32.jpg

79	Tue Oct 30 22:15:41 2012	Markus Friedl	MicronOrigami_gross	run	run041	100k	30.10.2012 22:09:13		Unknown
Cooling for 2DSSD established after some struggle. 2DSSD fully read out with cooling HV= +40 V -40 V I = 1.84 uA Beam position: Origami ce: p-side: APV #10 (= pos 4) n-side: APV #19 (= pos 3) Positions of thermal sensors: 11 Kapillare Anfang 12 Kapillare Ende 13 --- 14 unmittelbar nach Kapillare 15 Origami in 16 Origami out 17 Origami -z 18 Origami CE Strip order: n-Seite: rechts (Salev) nach links (Jura) p-Seite: oben nach unten APV chips with lower noise: -z ce p-side #5 #10 (= pos 4) n-side #13 (= pos1) #19 (= pos 3)
Attachment 1: temperatures_run041.jpg

78	Tue Oct 30 18:35:51 2012	Christian Irmler	MicronOrigami_gross	run	run040	100k	30.10.2012 18:23:21	30.10.2012 21:55:53	Unknown
Cooling for 2DSSD established after some struggle. 2DSSD fully read out with cooling HV= +40 V -40 V I = 2.1 uA Beam position: Origami -z p-side: APV #5 n-side: APV #13 (= pos.1 of -z) Positions of thermal sensors: 11 Kapillare Anfang 12 Kapillare Ende 13 --- 14 unmittelbar nach Kapillare 15 Origami in 16 Origami out 17 Origami -z 18 Origami CE Strip order: n-Seite: rechts (Salev) nach links (Jura) p-Seite: oben nach unten APV chips with lower noise: -z ce p-side #5 #10 (= pos 4) n-side #13 (= pos1) #19 (= pos 3)
Attachment 1: temperatures_run040.jpg

77	Tue Oct 30 17:24:01 2012	Markus Friedl	MicronOrigami_gross	cal	cal040	83800	30.10.2012 17:20:28	30.10.2012 17:54:09	Unknown
Cooling for 2DSSD established after some struggle. 2DSSD fully read out with cooling HV= +40 V -40 V I = 2 uA Beam position: none Positions of thermal sensors: 11 Kapillare Anfang 12 Kapillare Ende 13 --- 14 unmittelbar nach Kapillare 15 Origami in 16 Origami out 17 Origami -z 18 Origami CE Strip order: n-Seite: rechts (Salev) nach links (Jura) p-Seite: oben nach unten APV chips with lower noise: -z ce p-side #5 #10 (= pos 4) n-side #13 (= pos1) #19 (= pos 3)
76	Tue Oct 30 11:05:32 2012	Markus Friedl	HPK_baby	run	run039	150k	30.10.2012 11:03:19	30.10.2012 14:57:57	Unknown
HPK baby stack after irradiation - no cooling I = 420A and growing (warming up) positioned centered on p and n
75	Tue Oct 30 10:37:19 2012	Markus Friedl	HPK_baby	cal	cal039	83800	30.10.2012 10:35:35	30.10.2012 11:02:06	Good
Turned off cooling, now taking warm data HPK baby stack after irradiation - no cooling I = 200A and growing (warming up) positioned centered on p and n
74	Mon Oct 29 23:13:52 2012	Markus Friedl	HPK_baby	run	run038	476500	29.10.2012 23:13:05	30.10.2012 10:22:54	Unknown
HPK baby stack after irradiation with partial cooling (HPK neutron & HPK neutron/gamma) HV = +75 V -75V I = 176A positioned centered on p and n Temp sensors configuration: 11 HPK Neutron n in 12 HPK Neutron n -> p 13 ---- 14 HPK Neutron p -> Gamma p 15 Gamma p -> n 16 Neutron Gamma n out Perfect cooling curve :-)
73	Mon Oct 29 22:36:52 2012	Markus Friedl	HPK_baby	cal	cal038	83800	29.10.2012 22:17:34	29.10.2012 22:47:47	Good
HPK baby stack after irradiation with partial cooling (HPK neutron & HPK neutron/gamma) HV = +75 Vm -75V I = 226A Temp sensors configuration: 11 HPK Neutron n in 12 HPK Neutron n -> p 13 ---- 14 HPK Neutron p -> Gamma p 15 Gamma p -> n 16 Neutron Gamma n out
72	Mon Oct 29 12:24:41 2012	Markus Friedl	Infineon	run	run037	301382	29.10.2012 12:22:22	29.10.2012 21:05:57	Good
Infineon stack Version 2 after irradiation HV = +300 V I = 162 A hitting upper part of strixels and baby, vertically ~centered
71	Mon Oct 29 11:36:40 2012	Markus Friedl	Infineon	cal	cal037	83800	29.10.2012 11:35:12	29.10.2012 11:58:02	Good
Infineon stack Version 2 after irradiation HV = +300 V I = 137 A
70	Mon Oct 29 04:02:16 2012	Manfred Valentan	MicronBaby	run	run036	296294	29.10.2012 03:53:33	29.10.2012 11:05:35	Unknown
Micron Baby stack 2 after irradiation (intermediate strips) HV = -100 V I = 36 uA DESY table shifted by 2.5mm (beam down) after beam profile was changed (to get higher intensity) beam hitting higher APVs Stopped when long beam off period was announced
69	Sun Oct 28 20:07:28 2012	Markus Friedl	MicronBaby	run	run035	304110	28.10.2012 20:01:48	29.10.2012 03:50:44	Good
Micron Baby stack 2 after irradiation (intermediate strips) HV = -100 V I = 39 uA DESY table shifted by 2.5mm (beam down) after beam profile was changed (to get higher intensity) beam hitting lower APVs
68	Sun Oct 28 16:22:35 2012	Christian Irmler	MicronBaby	run	run034	101864	28.10.2012 16:12:24	28.10.2012 18:34:24	Good
Micron Baby stack 2 after irradiation (intermediate strips) HV = -100 V I = 36.3 uA Position APV0 of all sensors X-Y Table coordinates: X=0 / Y=-1 (afterwards: nulled) PC power cut after ~100k events
67	Sun Oct 28 15:46:07 2012	Markus Friedl	MicronBaby	cal	cal034	83800	28.10.2012 15:19:10	28.10.2012 15:40:47	Good
Micron Baby stack 2 after irradiation (intermediate strips) HV = -100 V I = 33 uA
66	Sun Oct 28 08:37:53 2012	Christian Irmler	MicronOrigami_gross	run	run033	66937	28.10.2012 08:33:42	28.10.2012 14:10:43	Unknown
Belle stack 2 after gamma irradiation HV = +50V -50V I = 101 uA CO2 cooling hitting APV2 (n side) = center of wedge sensor Temperatur sensors: T11: Origami #4 in T12: Origami #4 out T13: Origami #3 in (still wrong values!) T14: Origami #3 out T15: Wedge new 1 out T16: Wedge old out T17: Wedge new 1 cooling block T18: Wedge old cooling block
Attachment 1: temp_run33.JPG

Attachment 2: temp_run33_2.JPG

65	Sun Oct 28 02:51:49 2012	Markus Friedl	MicronOrigami_gross	run	run032	150k	28.10.2012 02:47:24	28.10.2012 08:31:19	Good
Belle stack 2 after gamma irradiation HV = +50V -50V I = 101 uA Bias currents absolutely stable during the whole run. CO2 cooling hitting APV3 (n side) = wide side of wedge sensor
64	Sat Oct 27 21:49:08 2012	Markus Friedl	MicronOrigami_gross	run	run031	150k	27.10.2012 21:42:46	28.10.2012 02:35:55 (+1h due to winter time)	Good
Belle stack 2 after gamma irrdiation HV = +50V -50 V I = 102 uA CO2 cooling
63	Sat Oct 27 19:36:24 2012	Markus Friedl	MicronOrigami_gross	cal	cal031	83800	27.10.2012 19:59:50	27.10.2012 20:44:38	Good
Belle stack 2 after irradiation HV = +50V -50V I = 112 µA CO2 cooling
62	Sat Oct 27 07:51:49 2012	Manfred Valentan	MicronBaby	run	run030	376678	27.10.2012 07:49:09	27.10.2012 17:32:07	Good
After irradiation xy-table: x=319.4, y=87.6 beam hits APV1 Micron baby stack after gamma irrdiation HV = -100 V I = -58 uA
61	Sat Oct 27 01:13:47 2012	Christian Irmler	MicronBaby	run	run029	307k	27.10.2012 01:02:49	27.10.2012 07:36:34	Good
After irradiation xy-table: x=319.4, y=74.6 beam hits APV0 Micron baby stack after gamma irrdiation HV = -100 V I = -58 uA

Goto page 1, 2, 3, 4 Next All

ELOG V3.1.5-fc6679b