Home CMS Production Clean room MedAustron HEPHY testbeams old
testbeam-rd50-desy-Oct2024 testbeam-RD50-DESY-Apr2024 testbeam-RD50-DESY-Jul2023 testbeam-RD50-CERN-Oct2022 testbeam-DESY-Oct2017 testbeam-DESY-April2017 testbeam-SPS2015 testbeam-SPS2014 testbeam-DESY14 testbeam-SPS12 testbeam-SPS11 testbeam-SPS10 testbeam-SPS09 testbeam-SPS08 LP-TPC
  HEPHY logbook for testbeam at SPS September/October 2010, Page 4 of 8  Not logged in ELOG logo
ID Date Authordown Project Subject Run Number Events StartTime EndTime
  89   Wed Oct 6 10:15:26 2010 Marko DragicevicMicron BabyXY Positions After Irradiation    

center position: 119/50/(7.5)

top left (direction jura, bottom right on sensor): 127/56.5/7.5

bottom right (direction saleve, top left on sensor): 111/43.5/7.5

  90   Wed Oct 6 11:03:59 2010 Marko DragicevicMicron Babycalcal0138380006.10.2010 11:03:12 

8 x Micron Baby (3 irradiated), no cooling
HV=100V I=115uA (start of run)
beam off

# VADJ/VPSP increased to 48 (was 30) for irradiated DUTs to restore baseline position (higher after irradiation)

ADC delay timing did not change after irradiation (verified)
 

  94   Wed Oct 6 23:02:09 2010 Marko DragiceviccommonBeam Configuration    

Beam Settings and Profile on 5.10.2010 - 17:00h

Saved as: H6B.801

Attachment 1: BeamProfile.gif
BeamProfile.gif
Attachment 2: BeamMagnets.gif
BeamMagnets.gif
Attachment 3: BeamColli.gif
BeamColli.gif
  95   Wed Oct 6 23:03:15 2010 Marko DragicevicBELLEcalcal0148380006.10.2010 23:01:5606.10.2010 23:34:07

Belle stack without Origami2
HV=80V I=227uA

beam on

  3   Thu Sep 23 15:32:28 2010 Manfred ValentanMicron BabyModul B2Micron_2826_7_Baby4 -> UNBRAUCHBAR    

p-side: Hybrid 42
APV2: viele gerissene bonds der inneren Bondreihe
APV3: gerissene bonds innen

n-side: Hybrid 32
APV4: 0-35 fail
APV5: 10-40, 68 fail

 

Attachment 1: hardrun_2826_7_type4_pednoise_apv0.png
hardrun_2826_7_type4_pednoise_apv0.png
Attachment 2: hardrun_2826_7_type4_pednoise_apv1.png
hardrun_2826_7_type4_pednoise_apv1.png
Attachment 3: hardrun_2826_7_type4_pednoise_apv2.png
hardrun_2826_7_type4_pednoise_apv2.png
Attachment 4: hardrun_2826_7_type4_pednoise_apv3.png
hardrun_2826_7_type4_pednoise_apv3.png
Attachment 5: hardrun_2826_7_type4_pednoise_apv4.png
hardrun_2826_7_type4_pednoise_apv4.png
Attachment 6: hardrun_2826_7_type4_pednoise_apv5.png
hardrun_2826_7_type4_pednoise_apv5.png
  4   Thu Sep 23 15:37:54 2010 Manfred ValentanMicron BabyModul B2Micron_2826_19_Baby4 -> TRACKING & best DUT candidate    

p-side: Hybrid 48
alles ok

n-side: Hybrid 35 (wurde repariert, nachdem ein paar bonds dran glauben mussten...)
APV4: 15-25 hoher noise, keine Fehler zu sehen -> Sensorfehler?
APV5: 127&128 kreuzen sich, beim Behebungsversuch mehr Schaden angerichtet -> besser mal die Finger davon lassen!

Attachment 1: hardrun_2826_19_type4_pednoise_apv0.png
hardrun_2826_19_type4_pednoise_apv0.png
Attachment 2: hardrun_2826_19_type4_pednoise_apv1.png
hardrun_2826_19_type4_pednoise_apv1.png
Attachment 3: hardrun_2826_19_type4_pednoise_apv2.png
hardrun_2826_19_type4_pednoise_apv2.png
Attachment 4: hardrun_2826_19_type4_pednoise_apv3.png
hardrun_2826_19_type4_pednoise_apv3.png
Attachment 5: hardrun_2826_19_type4_pednoise_apv4.png
hardrun_2826_19_type4_pednoise_apv4.png
Attachment 6: hardrun_2826_19_type4_pednoise_apv5.png
hardrun_2826_19_type4_pednoise_apv5.png
  5   Thu Sep 23 15:54:20 2010 Manfred ValentanMicron BabyModul B2Micron_2826_19_Baby3 -> DUT & TRACKING    

p-side: Hybrid 47
alles ok

n-side: Hybrid 38
APV5: Streifen 127 hoher Noise

ALS DUT VERWENDEN!

 

Attachment 1: hardrun_2826_19_type3_pednoise_apv0.png
hardrun_2826_19_type3_pednoise_apv0.png
Attachment 2: hardrun_2826_19_type3_pednoise_apv1.png
hardrun_2826_19_type3_pednoise_apv1.png
Attachment 3: hardrun_2826_19_type3_pednoise_apv2.png
hardrun_2826_19_type3_pednoise_apv2.png
Attachment 4: hardrun_2826_19_type3_pednoise_apv3.png
hardrun_2826_19_type3_pednoise_apv3.png
Attachment 5: hardrun_2826_19_type3_pednoise_apv4.png
hardrun_2826_19_type3_pednoise_apv4.png
Attachment 6: hardrun_2826_19_type3_pednoise_apv5.png
hardrun_2826_19_type3_pednoise_apv5.png
  6   Thu Sep 23 16:00:31 2010 Manfred ValentanMicron BabyModul B2Micron_2826_19_Baby2 -> TRACKING    

p-side: Hybrid 46
alles ok

n-side: Hybrid 37
APV4: 70-75 schlecht, nix zu sehen -> Sensorfehler
APV5: 115-128 schlecht, rebond fail?

FUER TRACKING GEEIGNET!

 

 

 

Attachment 1: hardrun_2826_19_type2_pednoise_apv0.png
hardrun_2826_19_type2_pednoise_apv0.png
Attachment 2: hardrun_2826_19_type2_pednoise_apv1.png
hardrun_2826_19_type2_pednoise_apv1.png
Attachment 3: hardrun_2826_19_type2_pednoise_apv2.png
hardrun_2826_19_type2_pednoise_apv2.png
Attachment 4: hardrun_2826_19_type2_pednoise_apv3.png
hardrun_2826_19_type2_pednoise_apv3.png
Attachment 5: hardrun_2826_19_type2_pednoise_apv4.png
hardrun_2826_19_type2_pednoise_apv4.png
Attachment 6: hardrun_2826_19_type2_pednoise_apv5.png
hardrun_2826_19_type2_pednoise_apv5.png
  7   Thu Sep 23 16:01:10 2010 Manfred ValentanMicron BabyModul B2Micron_2826_7_Baby3 -> DUT    

p-side: Hybrid 40
APV3: letzte 10 Streifennicht gebondet, ging sich beim Prototyp-Modul an der Stelle nicht aus

n-side: Hybrid 30
APV5: 57-64 schlecht, rebond fail?

ALS DUT GEEIGNET!

 

 

 

 

Attachment 1: hardrun_2826_7_type3_pednoise_apv0.png
hardrun_2826_7_type3_pednoise_apv0.png
Attachment 2: hardrun_2826_7_type3_pednoise_apv1.png
hardrun_2826_7_type3_pednoise_apv1.png
Attachment 3: hardrun_2826_7_type3_pednoise_apv2.png
hardrun_2826_7_type3_pednoise_apv2.png
Attachment 4: hardrun_2826_7_type3_pednoise_apv3.png
hardrun_2826_7_type3_pednoise_apv3.png
Attachment 5: hardrun_2826_7_type3_pednoise_apv4.png
hardrun_2826_7_type3_pednoise_apv4.png
Attachment 6: hardrun_2826_7_type3_pednoise_apv5.png
hardrun_2826_7_type3_pednoise_apv5.png
  8   Thu Sep 23 16:12:54 2010 Manfred ValentanMicron BabyModul B2Micron_2826_7_Baby2 -> DUT & TRACKING    

p-side: Hybrid 41
alles ok

n-side: Hybrid 31
APV4: Streifen 0, 83 schlecht
APV5: Streifen 64, 88, 126 schlecht

ALS DUT GEEIGNET!
FUER TRACKING GEEIGNET!

Attachment 1: hardrun_single_2826_7_type2_pednoise_apv0.png
hardrun_single_2826_7_type2_pednoise_apv0.png
Attachment 2: hardrun_single_2826_7_type2_pednoise_apv1.png
hardrun_single_2826_7_type2_pednoise_apv1.png
Attachment 3: hardrun_single_2826_7_type2_pednoise_apv2.png
hardrun_single_2826_7_type2_pednoise_apv2.png
Attachment 4: hardrun_single_2826_7_type2_pednoise_apv3.png
hardrun_single_2826_7_type2_pednoise_apv3.png
Attachment 5: hardrun_single_2826_7_type2_pednoise_apv4.png
hardrun_single_2826_7_type2_pednoise_apv4.png
Attachment 6: hardrun_single_2826_7_type2_pednoise_apv5.png
hardrun_single_2826_7_type2_pednoise_apv5.png
  9   Thu Sep 23 16:19:54 2010 Manfred ValentanMicron BabyModul B2Micron_2826_1_Baby4, DUT EINGESCHRAENKT, TRACKING    

p-side: Hybrid 45
APV0: beide Randstreifen schlecht
APV1: Streifen 0 schlecht
APV3: beide Randstreifen etwas schlechter, nicht schlimm

n-side: Hybrid 36
APV4: 0, 9, 40, 79-85, 97, 102, 124 Sensorfehler?
APV5: 0-30 vereinzelt schlechte Streifen, 115-128 Bonds beruehren
 

ALS DUT AUGENZUDRUECKEN GEEIGNET!
FUER TRACKING GEEIGNET!

 

 

Attachment 1: hardrun_single_2826_1_type4_pednoise_apv0.png
hardrun_single_2826_1_type4_pednoise_apv0.png
Attachment 2: hardrun_single_2826_1_type4_pednoise_apv1.png
hardrun_single_2826_1_type4_pednoise_apv1.png
Attachment 3: hardrun_single_2826_1_type4_pednoise_apv2.png
hardrun_single_2826_1_type4_pednoise_apv2.png
Attachment 4: hardrun_single_2826_1_type4_pednoise_apv3.png
hardrun_single_2826_1_type4_pednoise_apv3.png
Attachment 5: hardrun_single_2826_1_type4_pednoise_apv4.png
hardrun_single_2826_1_type4_pednoise_apv4.png
Attachment 6: hardrun_single_2826_1_type4_pednoise_apv5.png
hardrun_single_2826_1_type4_pednoise_apv5.png
  10   Thu Sep 23 16:22:33 2010 Manfred ValentanMicron BabyModul B2Micron_2826_1_Baby3, TRACKING    

p-side: Hybrid 44
alles ok

n-side: Hybrid 34
APV4: zur Gaenze schlecht, APV-Fehler?
APV5: beide Randstreifen schlecht

FUER TRACKING GEEIGNET!

 

 

 

 

 

Attachment 1: hardrun_single_2826_1_type3_pednoise_apv0.png
hardrun_single_2826_1_type3_pednoise_apv0.png
Attachment 2: hardrun_single_2826_1_type3_pednoise_apv1.png
hardrun_single_2826_1_type3_pednoise_apv1.png
Attachment 3: hardrun_single_2826_1_type3_pednoise_apv2.png
hardrun_single_2826_1_type3_pednoise_apv2.png
Attachment 4: hardrun_single_2826_1_type3_pednoise_apv3.png
hardrun_single_2826_1_type3_pednoise_apv3.png
Attachment 5: hardrun_single_2826_1_type3_pednoise_apv4.png
hardrun_single_2826_1_type3_pednoise_apv4.png
Attachment 6: hardrun_single_2826_1_type3_pednoise_apv5.png
hardrun_single_2826_1_type3_pednoise_apv5.png
  11   Thu Sep 23 16:23:07 2010 Manfred ValentanMicron BabyModul B2Micron_2826_1_Baby2, DUT (eingeschraenkt) & TRACKING    

p-side: Hybrid 43
APV3: Streifen 9 schlecht

n-side: Hybrid 33
APV4: 0-10 andere Bond-Parameter?, 28&29 erhoehtes noise
APV5: 111-128: 4 schlechte Streifen + common mode correction?

ALS DUT GEEIGNET!
FUER TRACKING GEEIGNET!

 

 

 

 

 

Attachment 1: hardrun_2826_1_type2_pednoise_apv0.png
hardrun_2826_1_type2_pednoise_apv0.png
Attachment 2: hardrun_2826_1_type2_pednoise_apv1.png
hardrun_2826_1_type2_pednoise_apv1.png
Attachment 3: hardrun_2826_1_type2_pednoise_apv2.png
hardrun_2826_1_type2_pednoise_apv2.png
Attachment 4: hardrun_2826_1_type2_pednoise_apv3.png
hardrun_2826_1_type2_pednoise_apv3.png
Attachment 5: hardrun_2826_1_type2_pednoise_apv4.png
hardrun_2826_1_type2_pednoise_apv4.png
Attachment 6: hardrun_2826_1_type2_pednoise_apv5.png
hardrun_2826_1_type2_pednoise_apv5.png
  12   Fri Sep 24 12:09:32 2010 Manfred ValentanBELLEgds-file of Micron wafer    
Attachment 1: WaferMicron30.gds
Attachment 2: DSSD_layerproperties.lyp
<?xml version="1.0"?>
<layer-properties>
 <properties>
  <frame-color>#000000</frame-color>
  <fill-color>#000000</fill-color>
  <frame-brightness>0</frame-brightness>
  <fill-brightness>0</fill-brightness>
  <dither-pattern>I9</dither-pattern>
  <visible>true</visible>
  <transparent>false</transparent>
  <width>1</width>
  <marked>false</marked>
  <animation>0</animation>
  <name>0/0@1 Mask dimensions</name>
  <source>0/0@1</source>
 </properties>
 <properties>
  <frame-color/>
  <fill-color/>
  <frame-brightness>0</frame-brightness>
  <fill-brightness>0</fill-brightness>
  <dither-pattern/>
  <visible>true</visible>
  <transparent>false</transparent>
  <width>0</width>
  <marked>false</marked>
  <animation>0</animation>
  <name>p-side (junction)</name>
  <source>*/*@*</source>
  <group-members>
   <frame-color>#01ff6b</frame-color>
   <fill-color>#01ff6b</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I9</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>1/0@1 N+</name>
   <source>1/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#ff0000</frame-color>
   <fill-color>#ff0000</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I9</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>2/0@1 P+</name>
   <source>2/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#ff8000</frame-color>
   <fill-color>#ff8000</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I9</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>3/0@1 Via</name>
   <source>3/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#000080</frame-color>
   <fill-color>#000080</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I9</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>4/0@1 Metal</name>
   <source>4/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#800080</frame-color>
   <fill-color>#800080</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I9</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>5/0@1 Passivation</name>
   <source>5/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#91ff00</frame-color>
   <fill-color>#91ff00</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I9</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>6/0@1 Polysilicon</name>
   <source>6/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#008000</frame-color>
   <fill-color>#008000</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I9</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>7/0@1 Polysilicon Head</name>
   <source>7/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#ff8000</frame-color>
   <fill-color>#ff8000</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I9</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>8/0@1 Via Edge Ring</name>
   <source>8/0@1</source>
  </group-members>
 </properties>
 <properties>
  <frame-color/>
  <fill-color/>
  <frame-brightness>0</frame-brightness>
  <fill-brightness>0</fill-brightness>
  <dither-pattern/>
  <visible>true</visible>
  <transparent>false</transparent>
  <width>0</width>
  <marked>false</marked>
  <animation>0</animation>
  <name>n-side (ohmic)</name>
  <source>*/*@*</source>
  <group-members>
   <frame-color>#01ff6b</frame-color>
   <fill-color>#01ff6b</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I5</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>21/0@1 N+ Back</name>
   <source>21/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#ff0000</frame-color>
   <fill-color>#ff0000</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I5</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>22/0@1 P+ Back</name>
   <source>22/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#ff8000</frame-color>
   <fill-color>#ff8000</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I5</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>23/0@1 Via Back</name>
   <source>23/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#0000ff</frame-color>
   <fill-color>#0000ff</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I5</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>24/0@1 Metal Back</name>
   <source>24/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#800080</frame-color>
   <fill-color>#800080</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I5</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>25/0@1 Passivation Back</name>
   <source>25/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#91ff00</frame-color>
   <fill-color>#91ff00</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I5</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>26/0@1 Polysilicon Back</name>
   <source>26/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#008000</frame-color>
   <fill-color>#008000</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I5</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>27/0@1 Polysilicon Head Back</name>
   <source>27/0@1</source>
  </group-members>
  <group-members>
   <frame-color>#ff8000</frame-color>
   <fill-color>#ff8000</fill-color>
   <frame-brightness>0</frame-brightness>
   <fill-brightness>0</fill-brightness>
   <dither-pattern>I5</dither-pattern>
   <visible>true</visible>
   <transparent>false</transparent>
   <width>1</width>
   <marked>false</marked>
   <animation>0</animation>
   <name>28/0@1 Via Edge Ring Back</name>
   <source>28/0@1</source>
  </group-members>
 </properties>
 <properties>
  <frame-color>#000000</frame-color>
  <fill-color>#000000</fill-color>
  <frame-brightness>0</frame-brightness>
  <fill-brightness>0</fill-brightness>
  <dither-pattern>I9</dither-pattern>
  <visible>true</visible>
  <transparent>false</transparent>
  <width>1</width>
  <marked>false</marked>
  <animation>0</animation>
  <name>100/0@1 Wafer Dimensions</name>
  <source>100/0@1</source>
 </properties>
</layer-properties>
  51   Fri Oct 1 10:06:59 2010 Manfred ValentanMicron Babyrunrun0217500001.10.2010 10:07:3701.10.2010 15:24:44

micron baby: 4 DUTs
HV=100V I=10.9uA (beginning)  13.6uA (end of run)
Beam on
60° rotation

 telescope run  20116

Attachment 1: run021_sensordisplay1.jpg
run021_sensordisplay1.jpg
Attachment 2: hit_map_und_cluster.png
hit_map_und_cluster.png
  70   Sun Oct 3 22:53:49 2010 Manfred ValentanPtrunrun0332560003.10.2010 22.47:3804.10.2010 00:02:37

Pt modules, angle scan

h01-Pt and h02-Pt
currents: h01=22.9A h02=6.9A
HV=200V beam on
angle: 33

telescope run 20138

  71   Mon Oct 4 00:08:55 2010 Manfred ValentanPtrunrun03418700004.10.2010 00:03:1804.10.2010 09:22:07

Pt modules, angle scan

h01-Pt and h02-Pt
currents: h01=21.9A h02=7.5A
HV=200V beam on
angle: 37

telescope run 20139

  72   Mon Oct 4 09:31:25 2010 Manfred ValentanPtrunrun0352560004.10.2010 09:28:40 

Pt modules, angle scan

h01-Pt and h02-Pt
currents: h01=24.7A h02=11.8A
HV=200V beam on
angle: 35 deg

telescope run 20140

  77   Mon Oct 4 14:15:22 2010 Manfred ValentanPtrunrun040 --> unusable --> no bias2560004.10.2010 14:?:?04.10.2010 14:32:14

Pt modules, angle scan

h01-Pt and h02-Pt
currents: h01=26.0A h02=13.4A
HV=200V beam on
angle: 47 deg

telescope run 20146

bias voltage has been ramped down during run039 --> needs to be repeated.

  83   Mon Oct 4 23:12:16 2010 Manfred ValentanBELLErunrun443000004.10.2010 23:?:?04.10.2010 23.57.23

angle scan Origami 1 and  Micron wedge 1
HV = 100V
chiller set to 14°C

angle: 30°
axis 1: 92.4 (horizontal)
axis 2: 35 (vertical)
axis 3: -22.5 (rotary table)

telescope run: 20150

ELOG V3.1.5-fc6679b