angle = 180
x/y=-27/-59.5
rate:6 10e6
PreTriggerWindow 2.915us and PostTriggerWindow 85ns
x/y=-24/-59.5
x/y=-24/-56.5
x/y=-24/-50.5
x/y=-21/-50.5
x/y=-21/-47.5
x/y=-21/-44.5 (falsche Richtung :( )
x/y=-21/-53.5
x/y=-21/-56.5
x/y=-21/-59.5
RaMon Rate 400kHz
front sensors 200mu: ~10-20kHz pro Streifen
Comments:
In between run, sensors were shifted by 2mm to the left (left and right in online DAQ is mirrored)
RaMon Rate not measured
front sensors 200mu: ~40-60Hz pro Streifen
stopped run due to too low rate
RaMon Rate 2MHz
front sensors 200mu: ~50-100kHz pro Streifen
Factor 10 lost more data than measured
RaMon Rate 1MHz
front sensors 200mu: ~10-25kHz pro Streifen
RaMon Rate 600kHz
front sensors 200mu: ~1kHz pro Streifen
change of the trigger settings inbetween, we saw inefficency on all detectors
RaMon Rate 1.3 MHz
We entered the room and connected the second LAN Port to the ReadOut-PC. The Eventbuilder-parameter got changed.
RaMon Rate 4.5MHz
From File 7 until 21 optional false, and from 22 true (everything deleted)
RaMon Rate: 1.3MHz
Tested different evenbuilder settings which made things worse, probably switch is the bottleneck, changed rate settings inbetween, requires sergey