ID |
Date |
Author |
Subject |
Run Number |
DUT |
Beam Energy |
Rate Setting |
Particle Type |
Events |
Data |
Beam Betatron |
Beam Chopper |
Beam Degrader |
Beam EFE |
Beam Orb |
Beam QuadScan |
PhantomType |
PhantomAngle |
280
|
Sun Nov 7 18:59:12 2021 |
Felix Ulrich-Pur | Low flux test 7.11.21 | 8 | | 145.4 | II(BETA+EFE) | | 30 spills | Good | | | | | | | none | |
Start: 07:20 O(100kHz) |
281
|
Sun Nov 7 18:59:28 2021 |
Felix Ulrich-Pur | Low flux test 7.11.21 | 9 | | 62.4 | II(BETA+EFE) | | 30 spills | Good | | | | | | | none | |
Start: 07:26 O(100kHz) |
295
|
Sun Nov 7 19:09:50 2021 |
Felix Ulrich-Pur | Fluence loss meas 7.11.21 | 24 | | 252.7 | II(BETA+EFE) | Proton | | Good | | | | | | | none | |
Start: 13:58
Alignment run without phantom |
296
|
Sun Nov 7 19:10:31 2021 |
Felix Ulrich-Pur | Fluence loss meas 7.11.21 | 25 | | 145.4 | II(BETA+EFE) | Proton | 40e6 | Good | | | | | | | none | |
Start: 14:04
Reference run without phantom |
297
|
Sun Nov 7 19:11:24 2021 |
Felix Ulrich-Pur | Fluence loss meas 7.11.21 | 26 | Drehtisch | 145.4 | II(BETA+EFE) | Proton | 60e6 | Good | | | | | | | Alu | 0 |
Start: 15:19
1 cm Alu stair phantom on rotary table (0deg--> always 1cm Al in beam) |
298
|
Sun Nov 7 19:12:57 2021 |
Felix Ulrich-Pur | Fluence loss meas 7.11.21 | 27 | Drehtisch | 145.4 | II(BETA+EFE) | Proton | 60e6 | Good | | | | | | | Alu | 90 |
Start: 16:40
1 cm Alu stair phantom on rotary table (90deg--> 0.2-1cm Alu) |
299
|
Sun Nov 7 19:13:36 2021 |
Felix Ulrich-Pur | Fluence loss meas 7.11.21 | 28 | Drehtisch | 100.4 | II(BETA+EFE) | Proton | 60e6 | Good | | | | | | | Alu | 90 |
Start: 18:00
1 cm Alu stair phantom on rotary table (90deg) |
300
|
Sun Nov 7 19:28:49 2021 |
Felix Ulrich-Pur | Fluence loss meas 7.11.21 | 29 | Drehtisch | 100.4 | II(BETA+EFE) | Proton | 60e6 | Good | | | | | | | Alu | 0 |
Start: 19:28
1 cm Alu stair phantom on rotary table (0deg) |
301
|
Sun Nov 7 21:04:43 2021 |
Felix Ulrich-Pur | Fluence loss meas 7.11.21 | 30 | | 100.4 | II(BETA+EFE) | Proton | 40e6 | Good | | | | | | | none | |
Start: 21.04
reference run 100.4MeV |
80
|
Sat Feb 27 09:31:57 2021 |
Felix Ulrich-Pur | Rate verification | 6 | SiC+Si+RaMon | 252.7 | I(EFE+SID0) | | | Good | | | | | | | | |
Start 07:16
rate looks fine,
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.475V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x: 0
y: 0
SiC: man sieht erstmals Signale |
81
|
Sat Feb 27 09:40:15 2021 |
Felix Ulrich-Pur | Rate verification | 7 | SiC+Si+RaMon | 62.4 | I(EFE+SID0) | | | Good | | | | | | | | |
Start 07:40
rate looks fine, however operators mentioned, that CPD data might have been loaded incorrectly-->pause during run and reloaded (07:48), rate seems unchanged
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.475V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x: 0
y: 0
|
82
|
Sat Feb 27 09:41:06 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 8 | SiC+Si+RaMon | 252.7 | I(EFE+SID0) | | | Good | | | | | | | | |
08:34 room request, PC for SiC had to be restarted, trigger were connected as prior to shift
Start 08:53
rate looks fine
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.475V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
verändere Position, ab 7:49 bei Aufnahme von Waveforms Position:
x = 0
y = 0
7:51 verändere Position
7:58 neue Position:
x = 8
y = 68
FPGA shutdown --> Datenaufzeichnung bis etwa 8:27, ab dann Suchen des Fehlers
|
83
|
Sat Feb 27 09:42:44 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 9 | SiC+Si+RaMon | 145.4 | I(EFE+SID0) | | | Good | | | | | | | | |
Start 09:37
SiC setrup had to be rewired (wr0ng polarity somewhere (insert here))
Umstellen:
channel 2: LVDS-Signal vertauschen
channel 2 Referenz: 2.100 V
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.475V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68 |
84
|
Sat Feb 27 18:36:15 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 10 | SiC+Si+RaMon | 145.4 | I(EFE+SID0) | | | Good | | | | | | | | |
Start 10:10
polarity now correct
Wiederholung von vorher, aber keine Aufnahme von neuen Waveforms
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.100 V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68 |
85
|
Sat Feb 27 18:38:09 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 11 | SiC+Si+RaMon | 62.4 | I(EFE+SID0) | | | Good | | | | | | | | |
Start 10:24
polarity now correct
no signal in sic --> energy too low due to scintis
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.100 V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68 |
86
|
Sat Feb 27 18:38:54 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 12 | SiC+Si+RaMon | 252.7 | I(EFE+SID0) | | | Good | | | | | | | | |
Start 10:28
polarity now correct
now signal in SiC
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.100 V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68 |
90
|
Sat Feb 27 18:44:06 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 16 | SiC+Si+RaMon | 100.4 | I(EFE+SID0) | | | Good | | | | | | | | |
Start 11:36
schöne Signale
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.100 V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68 |
117
|
Tue Mar 2 14:42:56 2021 |
Patrick Sieberer | MPW2 Tracking | 75 | MPW2+tracker | 252.7 | I(EFE+SID0) | Proton | | Crap | | | | | | | | |
Start xx:xx:
Tracker speed test: 2MHz internal Trigger from TLU -> works. |
118
|
Tue Mar 2 14:45:04 2021 |
Patrick Sieberer | MPW2 Tracking | 76 | MPW2+tracker | 252.7 | I(EFE+SID0) | Proton | | Crap | | | | | | | | |
Start xx:xx:
Tracker speed test: 4MHz internal Trigger from TLU -> works.
Tracker Setting: max_trigger=1 and trigger_busy=25. This gives ~20kHz eventrate. |
119
|
Tue Mar 2 14:46:49 2021 |
Patrick Sieberer | MPW2 Tracking | 77-82 | MPW2+tracker | 252.7 | I(EFE+SID0) | Proton | | Crap | | | | | | | | |
Start 22:23 (Run79), 22:30, 22:37, 22:43
Synchronization: Playing around with trgger_busy (range 25-500) This slows down Eventrate, but does not solve our issue of not being able to count all overflows. (This depends on the ratio of events hitting the MPW2 only, NOT on the overall busy rate) |