| ID |
Date |
Author |
Subject |
Run Number |
DUT |
Beam Energy |
Rate Setting |
Particle Type |
Events |
Data |
Beam Betatron |
Beam Chopper |
Beam Degrader |
Beam EFE |
Beam Orb |
Beam QuadScan |
PhantomType |
PhantomAngle |
|
224
|
Wed May 12 08:54:54 2021 |
Felix Ulrich-Pur | PMMA 0deg | 12 | Drehtisch | 100.4 | II(BETA+EFE) | Proton | | Good | | | | | | | PMMA | 0 |
TB 24.4.21
0deg (1cm PMMA) |
|
225
|
Wed May 12 08:56:02 2021 |
Felix Ulrich-Pur | ABS 0deg | 13 | Drehtisch | 145.4 | II(BETA+EFE) | Proton | | Good | | | | | | | ABS | 0 |
TB 24.4.21
0deg (1cm ABS) |
|
226
|
Wed May 12 08:56:37 2021 |
Felix Ulrich-Pur | ABS 0deg fluence loss | 15 | Drehtisch | 145.4 | II(BETA+EFE) | Proton | | Good | | | | | | | ABS | 0 |
TB 24.4.21
corrected trigger position for fluence loss radiography
0deg (1cm ABS) |
|
227
|
Sun Jun 20 19:26:54 2021 |
Felix Ulrich-Pur | HADES testrun 800MeV | 1 | HADES-LGADs | 800 | VII | Proton | | Good | | | | | | | none | 0 |
TB 19.6.21
Start 06:00
startet with wrong setting at the beginning (6 instead of 5) rate was then corrected, but RaMon was still running.
Final rate: 100kHz setting
07:24: room request: changed channel on board (was not connected to osci) |
|
228
|
Sun Jun 20 19:30:28 2021 |
Felix Ulrich-Pur | HADES testrun 100.4MeV | 2 | HADES-LGADs | 100.4 | II(BETA+EFE) | Proton | | Good | | | | | | | none | 0 |
TB 19.6.21
Start 07:51
beam was paused at 10:10
bias run and threshold optimization
mean rate was O(100kHz) |
|
229
|
Sun Jun 20 19:33:06 2021 |
Felix Ulrich-Pur | HADES testrun with increased rate 100.4MeV | 3 | HADES-LGADs | 100.4 | I(EFE+SID0) | Proton | | Good | | | | | | | none | 0 |
TB 19.6.21
Start 11:21
paused beam at 13:36
15:40-16:20 ECR source fail--downtime
Mean rate O(MHz) |
|
230
|
Sun Jun 20 19:34:59 2021 |
Felix Ulrich-Pur | HADES energy run | 4 | HADES-LGADs | 252.7 | I(EFE+SID0) | Proton | | Good | | | | | | | none | 0 |
TB 19.6.21
Start 17:13
Mean rate O(MHz)
|
|
231
|
Sun Jun 20 19:35:46 2021 |
Felix Ulrich-Pur | HADES energy run | 5 | HADES-LGADs | 194.3 | I(EFE+SID0) | Proton | | Good | | | | | | | none | 0 |
TB 19.6.21
Start 17:42
Mean rate O(MHz)
|
|
232
|
Sun Jun 20 19:37:09 2021 |
Felix Ulrich-Pur | HADES energy run | 6 | HADES-LGADs | 145.4 | I(EFE+SID0) | Proton | | Good | | | | | | | none | 0 |
TB 19.6.21
Start 18:15
Mean rate O(MHz)
|
|
233
|
Sun Jun 20 19:37:37 2021 |
Felix Ulrich-Pur | HADES energy run | 7 | HADES-LGADs | 83 | I(EFE+SID0) | Proton | | Good | | | | | | | none | 0 |
TB 19.6.21
Start 18:48
Mean rate O(MHz)
|
|
234
|
Sun Jun 20 19:37:58 2021 |
Felix Ulrich-Pur | HADES energy run | 8 | HADES-LGADs | 62.4 | I(EFE+SID0) | Proton | | Good | | | | | | | none | 0 |
TB 19.6.21
Start 19:16
Mean rate O(MHz)
|
|
235
|
Sun Jun 20 19:38:28 2021 |
Felix Ulrich-Pur | HADES increased rate run (wrong setting | 9 | HADES-LGADs | 800 | VII | Proton | | Good | | | 20 | | | | none | 0 |
TB 19.6.21
Start 19:43
rate setting was not set correctly deg20 in combination with setting VII instead of nominal flux deg10
|
|
236
|
Sun Jun 20 19:40:12 2021 |
Felix Ulrich-Pur | HADES increased rate | 10 | HADES-LGADs | 800 | nominal | Proton | | Good | | | 10 | | | | none | 0 |
TB 19.6.21
Start 21:50
Nominal flux degrader 10: mean rate O(200MHz)
|
|
237
|
Sun Jun 20 19:50:11 2021 |
Felix Ulrich-Pur | HADES sandwich TOF | 11 | HADES-LGADs+PMMAslabs | 100.4 | I(EFE+SID0) | Proton | | Good | | | | | | | PMMA | 0 |
TB 20.6.21
Start 15:00 (late handover and copying of data)
5cm Phantom thickness
Mean rate O(MHz)
signal in last 2 LGADs too high (only 52MeV residual energy after 5cm)
|
|
238
|
Sun Jun 20 19:54:37 2021 |
Felix Ulrich-Pur | HADES sandwich TOF | 11 | HADES-LGADs+PMMAslabs | 100.4 | I(EFE+SID0) | Proton | | Good | | | | | | | PMMA | 0 |
TB 20.6.21
Start 15:55
5cm Phantom thickness
Mean rate O(MHz)
gain in last 2 layers was adapted
RamonRun 11 was not stopped (beam was still on from previous run)
for live TOF estimation: TDC3,channel 9 - TDC2,channel9
|
|
239
|
Sun Jun 20 19:55:47 2021 |
Felix Ulrich-Pur | HADES sandwich TOF reference run | 12 | HADES-LGADs | 100.4 | I(EFE+SID0) | Proton | | Good | | | | | | | none | 0 |
TB 20.6.21
Start 16:46
0cm Phantom thickness
Mean rate O(MHz)
reference run without phantom
for live TOF estimation: TDC3,channel 9 - TDC2,channel9
|
|
240
|
Sun Jun 20 19:58:31 2021 |
Felix Ulrich-Pur | HADES sandwich TOF | 13 | HADES-LGADs+PMMAslabs | 100.4 | I(EFE+SID0) | Proton | | Good | | | | | | | PMMA | 0 |
TB 20.6.21
Start 17:27
3cm Phantom thickness
Mean rate O(MHz)
for live TOF estimation: TDC3,channel 9 - TDC2,channel9
|
|
241
|
Sun Jun 20 19:59:31 2021 |
Felix Ulrich-Pur | HADES sandwich TOF | 14 | HADES-LGADs+PMMAslabs | 100.4 | I(EFE+SID0) | Proton | | Good | | | | | | | PMMA | 0 |
TB 20.6.21
Start 18:03
1cm Phantom thickness
Mean rate O(MHz)
for live TOF estimation: TDC3,channel 9 - TDC2,channel9
last sensor stopped working
|
|
242
|
Sun Jun 20 20:00:05 2021 |
Felix Ulrich-Pur | HADES testrun 800MeV | 16 | HADES-LGADs | 800 | VII | Proton | | Good | | | | | | | none | 0 |
TB 20.6.21
Start 19:19
Mean rate O(MHz)
|
|
243
|
Sun Jun 20 20:02:03 2021 |
Felix Ulrich-Pur | HADES sandwich TOF | 15 | HADES-LGADs+PMMAslabs | 100.4 | I(EFE+SID0) | Proton | | Good | | | | | | | PMMA | 0 |
TB 20.6.21
Start 18:45
2cm Phantom thickness
Mean rate O(MHz)
for live TOF estimation: TDC3,channel 9 - TDC2,channel9
last sensor did not work |