TB 24.4.21

0deg (1cm PMMA)

timing was adjusted and FADC had to be restarted

TB 24.4.21

90deg (0.2-1cm PMMA)

TB 24.4.21

90deg (0.2-1cm PMMA)

TB 24.4.21

0deg (1cm PMMA)

TB 24.4.21

0deg (1cm ABS)

TB 24.4.21

corrected trigger position for fluence loss radiography

0deg (1cm ABS)

TB 19.6.21

Start 06:00
startet with wrong setting at the beginning (6 instead of 5) rate was then corrected, but RaMon was still running.

Final rate: 100kHz setting
07:24: room request: changed channel on board (was not connected to osci)

TB 19.6.21

Start 07:51
beam was paused at 10:10

bias run and threshold optimization

mean rate was O(100kHz)

TB 19.6.21

Start 11:21
paused beam at 13:36
15:40-16:20 ECR source fail--downtime

Mean rate O(MHz)

TB 19.6.21

Start 17:13

Mean rate O(MHz)
 

TB 19.6.21

Start 17:42
Mean rate O(MHz)
 

TB 19.6.21

Start 18:15
Mean rate O(MHz)
 

TB 19.6.21

Start 18:48
Mean rate O(MHz)
 

TB 19.6.21

Start 19:16
Mean rate O(MHz)
 

TB 19.6.21

Start 19:43
rate setting was not set correctly deg20 in combination with setting VII instead of nominal flux deg10
 

TB 19.6.21

Start 21:50

Nominal flux degrader 10: mean rate O(200MHz)
 

TB 20.6.21

Start 15:00 (late handover and copying of data)
5cm Phantom thickness
Mean rate O(MHz)

signal in last 2 LGADs too high (only 52MeV residual energy after 5cm)
 

TB 20.6.21

Start 15:55
5cm Phantom thickness
Mean rate O(MHz)
gain in last 2 layers was adapted
RamonRun 11 was not stopped (beam was still on from previous run)
for live TOF estimation: TDC3,channel 9 - TDC2,channel9
 

TB 20.6.21

Start 16:46
0cm Phantom thickness
Mean rate O(MHz)
reference run without phantom
for live TOF estimation: TDC3,channel 9 - TDC2,channel9
 

TB 20.6.21

Start 17:27
3cm Phantom thickness
Mean rate O(MHz)
for live TOF estimation: TDC3,channel 9 - TDC2,channel9