2019-11-24 15:13

Standalone TLU

TLU (Rack-mounted) failed: "netzwerk error"

2019-11-24 15:50

Standalone TLU + Tracker (Tera did not record data)

TLU (Rack-mounted) failed: "netzwerk error"

2019-11-24 16:42

"TLU not on network" (Alex does not know what was not on which network, maybe Felix' notes are more complete)

2019-11-24 16:48

"TLU not on network"

Data is good for Alignment

2019-11-24 17:21

TERA DAQ failed

2019-11-24 17:21

Run was interrupted to re-load config. A regular pattern in the hit maps suggested a problem with FIR, however the data looks good and a projection could be reconstructed

2019-11-24 17:54

I've forgotten to increment run number before pressing start. Run 43 was likely renamed to oldName_2019-11-24….xml and .dat

To correctly filter the issues due to FIR, Hao suggested using a neighbor cut of 15 to 20.

2019-11-24 18:57

TERA DAQ failed

2019-11-24 18:59 - 20:27

2019-11-24 20:28

TERA DAQ failed

2019-11-24 20:28 - 22:00

Setup 1 (on 20.10.2019):

• With Cividec

• Position: beam center, ch3 (diode 1) in front, ch4 (diode 3) in the rear

• RMS: ca. 23 mV, 24 mV

• Trigger on Ch3: ca. 250 mV

• Osci amplitude/div: 200 mV or 800 MeV, 400 mV for lower energies

Setup 2 (on 20.10.2019):

• Same as setup 1 but 1 cm to the top from beam center

Setup 3 (on 25.10.2019):

• Same as setup 1 but with Osci amplitude/div: 1V

Setup 4 (on 25.10.2019):

• No Cividec

• Postion: Same as setup 1

• RMS: ca. 0.3 mV, 0.3 mV

• Trigger: 3 mV

• Osci amplitude/div: 10 mV