| ID |
Date |
Author |
Project |
Subject |
Run Number |
Events |
StartTime |
EndTime |
Data |
Text |
 |
|
62
|
Sat Jan 11 20:56:29 2014 |
Markus Friedl | AIDA | run | run053 | 100k | 11.01.2014 20:55:29 | 11.01.2014 22:25:43 | Good | HV=140V I=7.1uA
centered position, HV scan
5GeV beam, 6 samples |
|
|
81
|
Wed Jan 29 12:02:52 2014 |
Wolfgang Treberspurg | Infineon | Single mode Run Stack 2 Bias Scan | HW_Run_Infineon_Stack2_BiasScan_001 | 100k | 28.01.2014 16:30 | 28.01.2014 16:50 | Good | HV at 0V; I at app. 5nA 3GeV, Single mode
|
|
|
90
|
Wed Jan 29 21:57:55 2014 |
Wolfgang Treberspurg | Infineon | Single mode Run Stack 2 Bias Scan | HW_Run_Infineon_Stack2_BiasScan_010 | 100k | 29.01.2014 13:20 | 29.01.2014 13:35 | Good | HV at 260V; I at app. 7.6µA 3GeV,
Single mode
|
|
|
44
|
Wed Jan 8 22:19:11 2014 |
Markus Friedl | AIDA | run | run037 | 1.2M | 08.01.2014 22:18:30 | 09.01.2014 10:08:14 | Good | HV=100V I=4.4uA
centered position
5GeV beam, single sample |
|
|
74
|
Sat Jan 25 18:24:03 2014 |
Wolfgang Treberspurg | Infineon | Single mode Run Stack 2 | HW_Run_Infineon_Stack2_001 | 1.05 M | 25.01.2014 10:30 | 25.01.2014 15:40 | Unknown | HV at 300V; I at app. 11µA 4GeV,
Single mode
Modules centered to beam but no hits |
|
|
71
|
Fri Jan 24 11:03:14 2014 |
Wolfgang Treberspurg | AIDA | AIDA | HW_AIDA002 | 0 | 24.01.2014 10:02 | | Crap | TuxDaq crashed |
|
|
7
|
Mon Jan 6 19:10:36 2014 |
Thomas Bergauer | common | Beam Momentum 3GeV/c | run001 to run012 | | | | Unknown | We have set the beam momentum to 3 GeV |
|
|
17
|
Tue Jan 7 02:17:14 2014 |
Thomas Bergauer | | beam momentum 6GeV/c | run013 | | | | Unknown | |
|
|
23
|
Tue Jan 7 09:33:51 2014 |
Thomas Bergauer | common | beam momentum back to 3Gev/c | run014 and later ones | | | | Unknown | |
|
|
28
|
Tue Jan 7 14:51:45 2014 |
Thomas Bergauer | Belle SVD | TLU control | | | | | Unknown | 1. ssh bastion
2. ssh belle-control
3. ssh |
|
|
46
|
Thu Jan 9 11:02:14 2014 |
Markus Friedl | AIDA | info | | | | | Unknown | Created bad strip masks for the AIDA config
files |
|
|
50
|
Thu Jan 9 14:47:21 2014 |
Thomas Bergauer | common | position of DESY Table | | | | | Unknown | BEAM mode:
height (z): -346 (initially:
-357)
horizontal (x): -255
OFF |
|
|
59
|
Fri Jan 10 11:02:31 2014 |
Markus Friedl | Belle SVD | Power supply | | | 10.01.2014 11:00:00 | | Unknown | |
|
|
67
|
Mon Jan 13 12:02:40 2014 |
Markus Friedl | common | Kontakt | | | | | Unknown | Richard Thalmeier Tel. 4801
Hao Yin |
|
|
68
|
Sun Jan 19 18:01:46 2014 |
Christian Irmler | common | AIDA setup operated with TuxDAQ | | | | | Unknown | New SIS driver version sis1100-2.13-3 installed
on DAQPC.
To install the driver call as root: |
|
|
73
|
Fri Jan 24 18:02:46 2014 |
Wolfgang Treberspurg | Infineon | New Infineon Stack | | | | | Good | Exchanged AIDA stack with modified Infineon
Stack
Configuration: |
|
|
96
|
Wed Jan 29 22:08:48 2014 |
Wolfgang Treberspurg | Infineon | Single mode Run Stack 2 Bias Scan | | | 29.01.2014 22:00 | 29.01.2014 22:00 | Good | All Infineon Stack 2 runs have been taken
at table position: 1.089030, -12.800610
|
|