Wed Jan 29 22:01:08 2014, Wolfgang Treberspurg, Infineon, Single mode Run Stack 2 Bias Scan, HW_Run_Infineon_Stack2_BiasScan_012, 200k, 29.01.2014 14:25, 29.01.2014 15:26, Good
|
HV at 280V; I at app. 8µA 3GeV, Single mode
|
Wed Jan 29 22:02:04 2014, Wolfgang Treberspurg, Infineon, Single mode Run Stack 2 Bias Scan, HW_Run_Infineon_Stack2_BiasScan_013, 200k, 29.01.2014 15:26, 29.01.2014 17:00, Good
|
HV at 290V; I at app. 8µA 3GeV, Single mode
|
Wed Jan 29 22:03:15 2014, Wolfgang Treberspurg, Infineon, Single mode Run Stack 2 Bias Scan, HW_Run_Infineon_Stack2_BiasScan_014, 200k, 29.01.2014 18:15, 29.01.2014 18:45, Good
|
HV at 260V; I at app. 7.5µA 3GeV, Single mode
|
Wed Jan 29 22:06:12 2014, Wolfgang Treberspurg, Infineon, Single mode Run Stack 2 Bias Scan, HW_Run_Infineon_Stack2_BiasScan_015, 200k, 29.01.2014 19:15, 29.01.2014 19:45, Good
|
HV at 300V; I at app. 7.5µA 3GeV, Single mode
|
Wed Jan 29 22:08:48 2014, Wolfgang Treberspurg, Infineon, Single mode Run Stack 2 Bias Scan, , , 29.01.2014 22:00, 29.01.2014 22:00, Good
|
All Infineon Stack 2 runs have been taken at table position: 1.089030, -12.800610
|
Wed Jan 29 22:36:35 2014, Wolfgang Treberspurg, Infineon, Single mode Run Stack 2 Bias Scan, HW_Run_Infineon_Stack2_pos1_001, 200k, 29.01.2014 22:15, 29.01.2014 22:35, Good
|
HV at 300V; I at app. 7.5µA 3GeV, Single mode
Position changed to -3.910970 -17.800610
|
Wed Jan 29 22:40:09 2014, Wolfgang Treberspurg, Infineon, Single mode Run Stack 2 Bias Scan, HW_Run_Infineon_Stack2_pos2_002, 200k, 29.01.2014 22:40, 29.01.2014 23:15, Good
|
HV at 300V; I at app. 7.5µA 3GeV, Single mode
Position changed to --8.91097 -22.80061
|
Mon Jan 6 19:10:36 2014, Thomas Bergauer, common, Beam Momentum 3GeV/c, run001 to run012, , , , Unknown
|
We have set the beam momentum to 3 GeV |
Tue Jan 7 02:17:14 2014, Thomas Bergauer, , beam momentum 6GeV/c, run013, , , , Unknown
|
|
Tue Jan 7 08:36:29 2014, Thomas Bergauer, Infineon, run, run014, 20k, 07.01.2014 08:34:06, 07.01.2014 09:05:47, Good
|
HV=290V I=9.55uA
position centered horizontally (+5mm)
DESY table z=-346 x=-255
6Gev/c,
bad strip region hardly hit |
Tue Jan 7 09:12:24 2014, Thomas Bergauer, Belle SVD, run, run015, 20k, 07.01.2014 09:10:52, 07.01.2014 09:15:39, Good
|
HV=290V I=9.55uA
position centered horizontally (+5mm)
DESY table z=-346 x=-255
energy switched back to 3Gev/c |
Tue Jan 7 09:22:09 2014, Thomas Bergauer, , run, run016, 50k, 07.01.2014 09:19:10, 07.01.2014 09:30:03, Good
|
HV=290V I=9.00uA
position move back to original position (0mm/0mm) (not hitting the right APVs anymore)
DESY table z=-346 x=-255 |
Tue Jan 7 09:33:16 2014, Thomas Bergauer, , run, run017, 100k, 07.01.2014 09:31:45, 07.01.2014 09:52:58, Good
|
HV=300V I=9.08uA
position adapted to center beam better (+10mm horizonal)
DESY table z=-346 x=-255
3Gev/c |
Tue Jan 7 09:33:51 2014, Thomas Bergauer, common, beam momentum back to 3Gev/c, run014 and later ones, , , , Unknown
|
|
Tue Jan 7 14:51:45 2014, Thomas Bergauer, Belle SVD, TLU control, , , , , Unknown
|
1. ssh bastion
2. ssh belle-control
3. ssh telescope-admin@tb-aconite
(password telescope++)
dann:
How to generate trigger from TLU through FTSW to detector systems
2014.1.6 Mikihiko Nakao
* step 1 - open monitor window to show the FTSW status
[you@bastion03 ~]$ ssh telescope-admin@belle-rpc1
(still only limited people has access to b2daq account:
ask DAQ people or Katsuro Nakamura of SVD group)
[b2daq@belle-rpc1 ~]$ ssh telescope-admin@ttd10
[b2daq@ttd10 ~]$ statft -55 -i -c
(55 is the FTSW board-id, -i -c are to show the status repeatedly)
* step 2 - initialize FTSW to accept TLU trigger
[b2daq@ttd10 ~]$ trigft -55 tlu
* step 3 - start trigger at TLU
[you@bastion03 ~]$ ssh belle-rpc2
[you@belle-rpc2 ~]$ ssh telescope-admin@tb-aconite
(ask Alan Campbell or somebody for the password)
telescope-admin@tb-aconite:~$ cd eudaq-nakao/bin
...$ ./TLUControl.exe -a 4 -d 1 -i RJ45 -w 10 -n
here, -a option gives the possible trigger coincidence
(-a 1 --- dummy trigger generator from FTSW)
-a 2 --- trigger counter 1 only
-a 4 --- trigger counter 2 only
-a 8 --- trigger counter 3 only
-a 6 --- trigger counter 1 and 2
-a 10 --- trigger counter 1 and 3
-a 12 --- trigger counter 2 and 2
-a 14 --- trigger counter 1 and 2 and 3
other options are kept to be the same
-d 1 -i RJ45 --- connection to FTSW
-w 10 --- update frequency (10msec)
-n --- suppress messages
This gives you output like:
Status: 00,--,--,--,--,-- (0,0)
Scalers: 0, 7, 0, 0 <== from FTSW-dummy and trigger counters 1, 2, 3
Particles: 1
Triggers: 0 <== actual trigger to be distributed to FTSW
Entries: 0
TS errors: 0, 0 (redundancy, re-read)
Timestamp: 0x4f25a008 (1327865864) = 3.45791
Time: 3.463 s, Freq: 0 Hz, Average: 0 Hz
- |
Wed Jan 8 12:40:30 2014, Thomas Bergauer, AIDA, intcal AIDA Stack, cal034, 83.8k, 08.01.2014 12:32:22, 08.01.2014 13:01:30, Unknown
|
HV=100V I=4.5uA
position adapted to center beam
|
Wed Jan 8 14:10:07 2014, Thomas Bergauer, AIDA, run, run035, 211681, 08.01.2014 14:01:25, 08.01.2014 17:03:55, Unknown
|
HV=100V I=4.2uA
position adapted to center beam
accidentally hit reset button on PC which ended this run abruptly...
5 GeV beam |
Thu Jan 9 14:47:21 2014, Thomas Bergauer, common, position of DESY Table, , , , , Unknown
|
BEAM mode:
- height (z): -346 (initially: -357)
- horizontal (x): -255
OFF BEAM mode (Parkposition):
- height (z): +37
- horizontal (x): -255
|
Sat Jan 4 16:30:46 2014, Markus Friedl, Infineon, cal, cal001, 83800, 04.01.2014 16:16:51, 04.01.2014 16:25:46, Good
|
HV=300V I=9.3uA (total) |
Sun Jan 5 15:08:09 2014, Markus Friedl, AIDA, cal, cal002, 83800, 05.01.2014 15:01:32, 05.01.2014 15:30:36, Good
|
HV=100V I=6uA |
|