TuxDaq crashed

Exchanged AIDA stack with modified Infineon Stack

Configuration:

Beam   Infineon_TB_2014_Baby1(P0)   ---   Inifineon_TB_2014_Baby2(P1) |||  Infineon_TB_2012_Baby2(P2)  --- Infineon_TB_2012_Baby1(P3) ||| Infineon_TB_2012_Strixel_Top-left(N0)  --- Infineon_TB_2012_Strixel_Bottom-right(N1) ---

HV at 300V; I at app. 11µA 4GeV, Single mode

Modules centered to beam but no hits at additional Strixel modul. Perhaps HV problems (High noise of Strixel almost did not change after biasing)

-> HV connection will be checked at next opportunity to enter area.

HV 300V, I ca. 11µA single mode

HV 300V, I 10µA

Beam Energy changed during the run between 2GeV - 5GeV - 4GeV

Latency perhaps not optimal set (has been 95) but exchanged trigger cable seems to require 93

HV 300V, I 10µA

Beam Energy  4GeV

Latency changed to 93

HV at 300V; I at app. 11µA 4GeV, Single mode

HV at 300V; I at app. 10µA 5GeV, Single mode

HV at 300V; I at app. 10µA 3GeV, Single mode

HV at 0V; I at app. 5nA 3GeV, Single mode

HV at 100V; I at app. 8.5µA 3GeV, Single mode

HV at 150V; I at app. 9µA 3GeV, Single mode

HV at 200V; I at app. 9.5µA 3GeV, Single mode

HV at 210V; I at app. 8.5µA 3GeV, Single mode

HV at 220V; I at app. 8.5µA 3GeV, Single mode

HV at 230V; I at app. 8µA 3GeV, Single mode

HV at 240V; I at app. 7.5µA 3GeV, Single mode

HV at 250V; I at app. 7.5µA 3GeV, Single mode

HV at 260V; I at app. 7.6µA 3GeV, Single mode

HV at 270V; I at app. 7.6µA 3GeV, Single mode