wo L3 and L4
taget: bw, pos 1
FirRun001, room temp
telescope n-side switched.
firrun003, room temp
update pedestal values for room temp sixlet runs.
Readjust after cooling box.
room temp, firrun002
Cooled, Temp see attachment
Room temp, fir002
Room temp, fir004
temp: in -22 out -18,
cooled pedestal vaules for long sixlet cal
0 offset (at the beginning)
Started APVDAQ and waited till 600 were taken then started EUDAQ
EUDAQ Run 21
Mimosa Thresholds lvl 6
Set mimosa threshold to 5 and recorded with FEI4 upstream
L3 already in sensor but not yet configured.
Probably to noisy to help much
RUN WITH SVD3 plus telescope
EUDET Run 54
Mimosa Threshold 6
Pos 6: x=136.08 mm, y= 91.49 mm (narrow side top)
Telescope in combination with SVD3
TLU Run 46
CE. pedestal run 003. Fir run 002. Room temp
Testrun with the FEI4 working for the first time.
Lessons learned about the configuration:
EnableDUTVeto needs to be set for the FEI4 to allow it to work
HandShakeMode needs to be enabled for the FEI4 as well
"Enable RJ45 input during scans" needs to be enabled for the USB-controller
RUN WITH SVD3, telescope and FEI4
EUDET Run 73
Pos 7: x= 30.5 mm, y= 79 mm (wide side center)
Upstream FEI4 used, checking if alignment change helped
EUDET Run 74
Pos 8: x=136.08 mm, y= 79 mm (narrow side center)
Upstream FEI4 used