| ID |
Date |
Author |
Project |
Subject |
Run Number |
Events |
StartTime |
EndTime |
Data |
|
24
|
Tue Nov 18 09:48:53 2014 |
Hao Yin | Belle SVD | PedestalRun_004 | | 10000 | Tue Nov 18 09:48:30 CET 2014 | | Unknown |
At room temperature.
Old delay settings and FIRRun_002
|
|
26
|
Tue Nov 18 10:12:25 2014 |
Hao Yin | Belle SVD | 6let PedestalRun_005 | | 10000 | Tue Nov 18 10:11:45 CET 2014 | | Unknown |
At room temperature
Latest delay, FIRRun002.
Check for bad strips. |
|
27
|
Tue Nov 18 10:26:56 2014 |
Hao Yin | Belle SVD | CalibrationRun_003 | | | Tue Nov 18 10:26:52 CET 2014 | | Unknown |
At room temperature
Latest delay and FIRRun |
|
32
|
Tue Nov 18 18:45:01 2014 |
Hao Yin | Belle SVD | Trigger Delay scan | | | Tue Nov 18 18:21:50 CET 2014 | | Unknown |
At room temperature
First run was at: 23 (no track)
TimingRun_001:
Trigger delay: 26
TimingRun_002:
Trigger delay: 29
TimingRun_003:
Trigger delay: 32
TimingRun_004:
Trigger delay: 20
TimingRun_005:
Trigger delay: 17
TimingRun_005:
Trigger delay: 14
Trigger chip delay: 110
|
|
33
|
Tue Nov 18 20:26:12 2014 |
Hao Yin | Belle SVD | HardwareRun_001 | | | Tue Nov 18 18:21:50 CET 2014 | | Unknown |
At room temperature
Latest ADC scan and FIR run.
Latest CAL.
Position: 0.0, see elog entry. |
|
35
|
Tue Nov 18 20:42:18 2014 |
Benedikt Würkner | Belle SVD | Coordinates of the DUT | | | | | Unknown |
We set the coordinates trying to put the beam in an area with well working APVs
Peak of course differs for n and p sensors due to their different pitch.
L4-6 n-side Peak around strip 180
L4&6 p-side mean value around strip 380
L5 p-side moved by 4.8mm due to reasons (APV misalignment I think) therefore the peak of the same measurements is moved by 4.8/75µm = 64 strips therefore centered around strip 320
The coordinates of the x-y table were set to 0:0 at this point. Refer to Run Alignment2 for reference data. |
|
42
|
Wed Nov 19 20:04:53 2014 |
Hao Yin | Belle SVD | PedestalRun_006 | | | | | Unknown |
Temperature: See attachment
FIRFilterRun_002
Layer 3-n side deactivated, because Hao broke it. |
|
43
|
Wed Nov 19 20:07:05 2014 |
Hao Yin | Belle SVD | HardwareRun_002 | | | | | Unknown |
Multi-6 cooled.
See latest Noise, and PedestalRun.
|
|
46
|
Wed Nov 19 22:25:29 2014 |
Hao Yin | Belle SVD | PedestalRun_008 [CheckLayout] | | | | | Unknown |
cooled (temperature see attachment latest noise run),
latest Noise, FIR settings with the right layout mapping. |
|
47
|
Wed Nov 19 22:59:24 2014 |
Hao Yin | Belle SVD | CalibrationRun_004 | | | | | Crap |
cooled (see last calibration run)
Latest noise, FIRfilter settings.
Failed due to VME read timeout. |
|
48
|
Wed Nov 19 23:15:50 2014 |
Hao Yin | Belle SVD | HardwareRun_003 | | | | | Unknown |
cooled, latest noise, cal, PedestalRun.
Rawmode |
|
49
|
Wed Nov 19 23:31:08 2014 |
Hao Yin | Belle SVD | HardwareRun_004 | | | | | Unknown |
Same as HardwareRun_003 but with ZS. |
|
50
|
Thu Nov 20 00:52:50 2014 |
Hao Yin | Belle SVD | FIRRun_002 | | | | | Unknown |
cooled with new delay run |
|
51
|
Thu Nov 20 00:54:21 2014 |
Hao Yin | Belle SVD | PedestalRun_008 | | | | | Unknown |
temp see attachment (von flo)
10000
latest fir filter (002) |
|
52
|
Thu Nov 20 00:55:14 2014 |
Hao Yin | Belle SVD | HardwareRun_007 | | | | | Unknown |
temp cooled see attachment
last noise run(007)
FIRRun_002
PedestalRun_008
new cal run Raw, test with put fifo full flags |
|
53
|
Thu Nov 20 10:22:17 2014 |
Markus Friedl | Belle SVD | common | | | | | Unknown |
- Some VME errors occured over night
- Optical fiber changed
- Situation improved
- L3n hybrid could not be configured by I2C
- Plugged cable into the former FWDn slot
- Fully working
|
|
54
|
Thu Nov 20 10:33:13 2014 |
Benedikt Würkner | Belle SVD | FIRRun and Delay Scan | 003 | | | | Unknown |
Cooled see appendix
with new layout (l3_n-side channels changed and reactivated).
Latest FIRRun |
|
55
|
Thu Nov 20 10:39:11 2014 |
Benedikt Würkner | Belle SVD | PedestalRun_009 | | | | | Unknown |
cooled see appendix (FIRRun003)
MaxEvents 10000
|
|
56
|
Thu Nov 20 10:39:13 2014 |
Benedikt Würkner | Belle SVD | PedestalRun_009 | | | | | Unknown |
cooled see appendix (FIRRun003)
MaxEvents 10000
|
|
57
|
Thu Nov 20 10:41:54 2014 |
Benedikt Würkner | Belle SVD | CalibrationRun_005 | | | | | Unknown |
cooled see appendix (FIRRun_003)
PedestalRun_009 |