New FIR run after reconecting to original setting. 

At room temperature

PedestalRun004 

Latest delay settings and FIRRun

At room temperature

Latest delay and FIRRun 

1.  VNC to 192.168.0.18
2. In command line: cd C:\Users\telescope\eudaq\bin
3. TLUControl.exe.exe -d 2 -a 11 - i RJ45

Operating with AIDA telescope: TLUControl.exe.exe -d 3 -a 11 - i RJ45

Dut Position (left to right):  11, 06, 05, 07

Infineon_run002 is just a calibration run for the vertical positioned sensors. 

At room temperature

First run was at: 23 (no track)

TimingRun_001:

Trigger delay: 26

 

TimingRun_002:

Trigger delay: 29

TimingRun_003:

Trigger delay: 32


 

TimingRun_004:

Trigger delay: 20

TimingRun_005:

Trigger delay: 17

 

TimingRun_005:

Trigger delay: 14
Trigger chip delay: 110

At room temperature

Latest ADC scan and FIR run.

Latest CAL.

Position: 0.0, see elog entry.

We set the coordinates trying to put the beam in an area with well working APVs

Peak of course differs for n and p sensors due to their different pitch.

L4-6 n-side Peak around strip 180

L4&6 p-side mean value around strip 380

L5 p-side moved by 4.8mm due to reasons (APV misalignment I think) therefore the peak of the same measurements is moved by 4.8/75µm = 64 strips therefore centered around strip 320

The coordinates of the x-y table were set to 0:0 at this point. Refer to Run Alignment2 for reference data.

Windows PC at Telescope:

0.) JTAG Programming: Chose a threshold file (recommended threshold 5) File: M26TB_Cern_2011.thresh5.mcf--> press start

1.) C:\Users\telescope\Desktop\users\BelleII --> start Mimosa 26 Telescope --> select all six Mimosa's

2.) C:\Users\telescope\Desktop\users\BelleII --> start startEudaq_fullWindows.bat

3.) Use configuration file hephy1 (location: C:\eudaq\conf). Change it according to your TLU settings (DUT mask, AND mask, etc.)

4.) configure

5.) start

x) Online monitor in preparation

Files: Are saved in C:\eudaq\data with internal numbering "run000000xxx.raw" (look at the date and time). [You can connect locally to this folder at HEPHY-SVD PC]

Temperature: See attachment

FIRFilterRun_002

Layer 3-n side deactivated, because Hao broke it.

Multi-6 cooled.

See latest Noise, and PedestalRun.

cooled (temperature see attachment latest noise run),

latest Noise, FIR settings with the right layout mapping.

cooled (see last calibration run)

Latest noise, FIRfilter settings. 

Failed due to VME read timeout.

cooled, latest noise, cal, PedestalRun.

Rawmode

Same as HardwareRun_003 but with ZS.  

cooled with new delay run

temp see attachment (von flo)
10000
latest fir filter (002)

temp cooled see attachment

last noise run(007)

FIRRun_002

PedestalRun_008

new cal run Raw, test with put fifo full flags

1. Some VME errors occured over night
2. Optical fiber changed
3. Situation improved

1. L3n hybrid could not be configured by I2C
2. Plugged cable into the former FWDn slot
3. Fully working