ID |
Date |
Author |
Project |
Subject |
Run Number |
Events |
StartTime |
EndTime |
Text |
|
42
|
Thu Sep 30 10:56:34 2010 |
Christian Irmler | common | Room numbers | | | | | Room and telefone numbers.
|
|
56
|
Sat Oct 2 15:24:00 2010 |
Erik Huemer | ITE | XY Position and Slow Control | | | | | center position: 119/48/187,5
|
|
65
|
Sun Oct 3 16:23:20 2010 |
Erik Huemer | Pt | XY/R Position | | | | | centerposition: 119/43/187,5
27 grad: 214,5 |
|
80
|
Mon Oct 4 16:29:36 2010 |
Christian Irmler | common | beam settings | | | | | beam settings optimized by beamline operator
wire champer display fixed |
|
84
|
Mon Oct 4 23:59:05 2010 |
Manfred Valentan | BELLE | run | run45 | | 04.10.2010 ??:??:?? | 05.10.2010 00:56:48 | angle scan Origami 1 and Micron wedge
1
HV = 100V |
|
89
|
Wed Oct 6 10:15:26 2010 |
Marko Dragicevic | Micron Baby | XY Positions After Irradiation | | | | | center position: 119/50/(7.5)
top left (direction jura, bottom
right on sensor): 127/56.5/7.5 |
|
94
|
Wed Oct 6 23:02:09 2010 |
Marko Dragicevic | common | Beam Configuration | | | | | Beam Settings and Profile on 5.10.2010
- 17:00h
Saved as: H6B.801 |
|
101
|
Fri Oct 8 23:22:32 2010 |
Manfred Valentan | BELLE | Schnittwinkel barrel vs. slanted | | | | | 17deg acceptance => Schnittwinkel barrel
option = 90-17 = 73deg
-----> rotary table 80.5 |
|
107
|
Sat Oct 9 18:56:35 2010 |
Thomas Bergauer | common | path to telescope data | | | | | eudetmac001.cern.ch
path is /Volumes/Data/eudet/Data/cern_2010_sept_silc_apvdaq
(Vienna system) |
|
108
|
Sat Oct 9 19:44:36 2010 |
Markus Friedl | common | end of success | | | 09.10.2010 19:44:23 | NaN | |
|
109
|
Sun Oct 10 15:45:04 2010 |
Thomas Bergauer | common | end of success | | | 09.10.2010 19:44:23 | NaN | ;-)
genau das gleiche wollte ich auch
gerade schreiben! |
|
110
|
Mon Oct 11 11:18:17 2010 |
Christian Irmler | common | end of success | | | 09.10.2010 19:44:23 | NaN | der Beiweis :-) |
|
111
|
Tue Oct 19 14:58:56 2010 |
Manfred Valentan | Micron Baby | geometry | | | | | |
|
112
|
Thu Mar 31 10:28:19 2011 |
Manfred Valentan | Micron Baby | DUT5, source run, post irrad, pre zupf | cal100 | | 31.03.2011 10:24:59 | 31.03.2011 10:33:15 | DUT5
cal-file: micronbaby_single_irrad_cal100.cfg
|
|
114
|
Thu Mar 31 12:11:04 2011 |
Manfred Valentan | Micron Baby | DUT4, source run, post irrad, pre zupf | cal101 | | 31.03.2011 12:09:36 | 31.03.2011 12:17:52 | DUT4
config file: micronbaby_single_irrrad_cal101.cfg
|
|
116
|
Fri Apr 8 13:25:58 2011 |
Manfred Valentan | Micron Baby | sensors and modules | | | | | TRK1: B2Micron_2826_1_baby2
TRK2: B2Micron_2826_1_baby3
DUT3: B2Micron_2826_7_baby2 (common |
|
120
|
Wed May 4 15:14:31 2011 |
Thomas Bergauer | Pt | info about module | | | | | pt-Modul hat jeweils zwei OB1 Sensoren
von STM (mit 122um Pitch)
im Abstand von 2mm uebereinander |
|
135
|
Tue May 17 19:08:29 2011 |
Manfred Valentan | Micron Baby | sensors for source test with intermediate strips | | | | | Every second bond of these sensors will
be removed to mimic the effect of an intermediate
strip. For comparison, this is done both |
|
41
|
Thu Sep 30 00:56:32 2010 |
Markus Friedl | Micron Baby | run | run014 | 100k | 30.09.2010 00:55:30 | 30.09.2010 11:20:02 | micron baby stack
HV=100V I=11.0uA |
|
113
|
Thu Mar 31 11:05:39 2011 |
Manfred Valentan | Micron Baby | DUT5, source run, post irrad, pre zupf | run100 | 100k | 31.03.2011 11:02:17 | 31.03.2011 11:15:41 | DUT5
cal-file: micronbaby_multi6_irrad_run100.cfg
|
|