ELOG testbeam-RD50-DESY-Jul2023

Home CMS Production Clean room MedAustron HEPHY testbeams old

testbeam-rd50-desy-Oct2024 testbeam-RD50-DESY-Apr2024 testbeam-RD50-DESY-Jul2023 testbeam-RD50-CERN-Oct2022 testbeam-DESY-Oct2017 testbeam-DESY-April2017 testbeam-SPS2015 testbeam-SPS2014 testbeam-DESY14 testbeam-SPS12 testbeam-SPS11 testbeam-SPS10 testbeam-SPS09 testbeam-SPS08 LP-TPC

Testbeam at DESY in 2023, Page 22 of 26

Not logged in

Find | Login | Help

New entries since:

Thu Jan 1 01:00:00 1970

Full | Summary | Threaded | Hide attachments

508 Entries

Goto page Previous 1, 2, 3 ... 21, 22, 23, 24, 25, 26 Next

ID	Date	Author	Subject	Run Number	DUT	Wafer	HV	Fluence	Resistivity	Beam Energy	Rate Setting	Particle Type	Data	t-Start	t-Stop	Duration_min
466	Sat Jul 15 15:08:36 2023	tb-crew	cooled unirradiated	1307	RD50-MPW3	unknown	91	unirradiated	1.9K	4.2	Low Flux Low	electron	Good	15.07.2023 15:03:36	15.07.2023 15:03:53	0
automatic log for run 1307 Comment: thr = 1.09V, vnfb = 0
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW3] this_config_file = config_piggy_new.cfg #SEC::MISC accept_tlu_trigger = 0 enable_readout = 1 calib_file_base = calib_base.txt config_si5345 = clock_config.txt execute_file = execute.txt i2c_addr_base = 0x41 i2c_dev = /dev/i2c-9 matrix_config = matrix_config_base.txt dcol_hb = 5 #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 0 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1.09 th__i = 3 [RD50_MPW3_Piggy] this_config_file = config_piggy_new.cfg #SEC::MISC calib_file = calib_piggy.txt execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 matrix_config = matrix_config_piggy.txt piggy_attached = 0 #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36
Attachment 2: matrix_config_base.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {mask} {en_inj} {hb_en} {en_sfout} {TDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 1 0 0 0 -1 00 01 1 0 0 0 -1 00 02 1 0 0 0 -1 00 03 1 0 0 0 -1 00 04 1 0 0 0 -1 00 05 1 0 0 0 -1 00 06 1 0 0 0 -1 00 07 1 0 0 0 -1 00 08 1 0 0 0 -1 00 09 1 0 0 0 -1 00 10 1 0 0 0 -1 00 11 1 0 0 0 -1 00 12 1 0 0 0 -1 00 13 1 0 0 0 -1 00 14 1 0 0 0 -1 00 15 1 0 0 0 -1 00 16 1 0 0 0 -1 00 17 1 0 0 0 -1 00 18 1 0 0 0 -1 00 19 1 0 0 0 -1 00 20 1 0 0 0 -1 00 21 1 0 0 0 -1 00 22 1 0 0 0 -1 00 23 1 0 0 0 -1 00 24 1 0 0 0 -1 00 25 1 0 0 0 -1 00 26 1 0 0 0 -1 00 27 1 0 0 0 -1 00 28 1 0 0 0 -1 00 29 1 0 0 0 -1 00 30 1 0 0 0 -1 00 31 1 0 0 0 -1 00 32 1 0 0 0 -1 00 33 1 0 0 0 -1 00 34 1 0 0 0 -1 00 35 1 0 0 0 -1 00 36 1 0 0 0 -1 00 37 1 0 0 0 -1 00 38 1 0 0 0 -1 00 39 1 0 0 0 -1 00 40 1 0 0 0 -1 00 41 1 0 0 0 -1 00 42 1 0 0 0 -1 00 43 1 0 0 0 -1 00 44 1 0 0 0 -1 00 45 1 0 0 0 -1 00 46 1 0 0 0 -1 00 47 1 0 0 0 -1 00 48 1 0 0 0 -1 00 49 1 0 0 0 -1 00 50 1 0 0 0 -1 00 51 1 0 0 0 -1 00 52 1 0 0 0 -1 00 53 1 0 0 0 -1 00 54 1 0 0 0 -1 00 55 1 0 0 0 -1 00 56 1 0 0 0 -1 00 57 1 0 0 0 -1 00 58 1 0 0 0 -1 00 59 1 0 0 0 -1 00 60 1 0 0 0 -1 00 61 1 0 0 0 -1 00 62 1 0 0 0 -1 00 63 1 0 0 0 -1 01 00 1 0 0 0 -1 01 01 1 0 0 0 -1 01 02 1 0 0 0 -1 01 03 1 0 0 0 -1 01 04 1 0 0 0 -1 01 05 1 0 0 0 -1 01 06 1 0 0 0 -1 01 07 1 0 0 0 -1 01 08 1 0 0 0 -1 01 09 1 0 0 0 -1 01 10 1 0 0 0 -1 01 11 1 0 0 0 -1 01 12 1 0 0 0 -1 01 13 1 0 0 0 -1 01 14 1 0 0 0 -1 01 15 1 0 0 0 -1 01 16 1 0 0 0 -1 01 17 1 0 0 0 -1 01 18 1 0 0 0 -1 01 19 1 0 0 0 -1 01 20 1 0 0 0 -1 01 21 1 0 0 0 -1 01 22 1 0 0 0 -1 01 23 1 0 0 0 -1 01 24 1 0 0 0 -1 01 25 1 0 0 0 -1 01 26 1 0 0 0 -1 01 27 1 0 0 0 -1 01 28 1 0 0 0 -1 01 29 1 0 0 0 -1 01 30 1 0 0 0 -1 01 31 1 0 0 0 -1 01 32 1 0 0 0 -1 01 33 1 0 0 0 -1 01 34 1 0 0 0 -1 01 35 1 0 0 0 -1 01 36 1 0 0 0 -1 01 37 1 0 0 0 -1 01 38 1 0 0 0 -1 01 39 1 0 0 0 -1 01 40 1 0 0 0 -1 01 41 1 0 0 0 -1 01 42 1 0 0 0 -1 01 43 1 0 0 0 -1 01 44 1 0 0 0 -1 01 45 1 0 0 0 -1 01 46 1 0 0 0 -1 01 47 1 0 0 0 -1 01 48 1 0 0 0 -1 01 49 1 0 0 0 -1 01 50 1 0 0 0 -1 01 51 1 0 0 0 -1 01 52 1 0 0 0 -1 01 53 1 0 0 0 -1 01 54 1 0 0 0 -1 01 55 1 0 0 0 -1 01 56 1 0 0 0 -1 01 57 1 0 0 0 -1 01 58 1 0 0 0 -1 01 59 1 0 0 0 -1 01 60 1 0 0 0 -1 01 61 1 0 0 0 -1 01 62 1 0 0 0 -1 01 63 1 0 0 0 -1 02 00 1 0 0 0 -1 02 01 1 0 0 0 -1 02 02 1 0 0 0 -1 02 03 1 0 0 0 -1 02 04 1 0 0 0 -1 02 05 1 0 0 0 -1 02 06 1 0 0 0 -1 02 07 1 0 0 0 -1 02 08 1 0 0 0 -1 02 09 1 0 0 0 -1 02 10 1 0 0 0 -1 02 11 1 0 0 0 -1 02 12 1 0 0 0 -1 02 13 1 0 0 0 -1 02 14 1 0 0 0 -1 02 15 1 0 0 0 -1 02 16 1 0 0 0 -1 02 17 1 0 0 0 -1 02 18 1 0 0 0 -1 02 19 1 0 0 0 -1 02 20 1 0 0 0 -1 02 21 1 0 0 0 -1 02 22 1 0 0 0 -1 02 23 1 0 0 0 -1 02 24 1 0 0 0 -1 02 25 1 0 0 0 -1 02 26 1 0 0 0 -1 02 27 1 0 0 0 -1 02 28 1 0 0 0 -1 02 29 1 0 0 0 -1 02 30 1 0 0 0 -1 02 31 1 0 0 0 -1 02 32 1 0 0 0 -1 02 33 1 0 0 0 -1 02 34 1 0 0 0 -1 02 35 1 0 0 0 -1 02 36 1 0 0 0 -1 02 37 1 0 0 0 -1 02 38 1 0 0 0 -1 02 39 1 0 0 0 -1 02 40 1 0 0 0 -1 02 41 1 0 0 0 -1 02 42 1 0 0 0 -1 02 43 1 0 0 0 -1 02 44 1 0 0 0 -1 02 45 1 0 0 0 -1 02 46 1 0 0 0 -1 02 47 1 0 0 0 -1 02 48 1 0 0 0 -1 02 49 1 0 0 0 -1 02 50 1 0 0 0 -1 02 51 1 0 0 0 -1 02 52 1 0 0 0 -1 02 53 1 0 0 0 -1 02 54 1 0 0 0 -1 02 55 1 0 0 0 -1 02 56 1 0 0 0 -1 02 57 1 0 0 0 -1 02 58 1 0 0 0 -1 02 59 1 0 0 0 -1 02 60 1 0 0 0 -1 02 61 1 0 0 0 -1 02 62 1 0 0 0 -1 02 63 1 0 0 0 -1 03 00 1 0 0 0 -1 03 01 1 0 0 0 -1 03 02 1 0 0 0 -1 03 03 1 0 0 0 -1 03 04 1 0 0 0 -1 03 05 1 0 0 0 -1 03 06 1 0 0 0 -1 03 07 1 0 0 0 -1 03 08 1 0 0 0 -1 03 09 1 0 0 0 -1 03 10 1 0 0 0 -1 03 11 1 0 0 0 -1 03 12 1 0 0 0 -1 03 13 1 0 0 0 -1 03 14 1 0 0 0 -1 03 15 1 0 0 0 -1 03 16 1 0 0 0 -1 03 17 1 0 0 0 -1 03 18 1 0 0 0 -1 03 19 1 0 0 0 -1 03 20 1 0 0 0 -1 03 21 1 0 0 0 -1 03 22 1 0 0 0 -1 03 23 1 0 0 0 -1 03 24 1 0 0 0 -1 03 25 1 0 0 0 -1 03 26 1 0 0 0 -1 03 27 1 0 0 0 -1 03 28 1 0 0 0 -1 03 29 1 0 0 0 -1 03 30 1 0 0 0 -1 03 31 1 0 0 0 -1 03 32 1 0 0 0 -1 03 33 1 0 0 0 -1 03 34 1 0 0 0 -1 03 35 1 0 0 0 -1 03 36 1 0 0 0 -1 03 37 1 0 0 0 -1 03 38 1 0 0 0 -1 03 39 1 0 0 0 -1 03 40 1 0 0 0 -1 03 41 1 0 0 0 -1 03 42 1 0 0 0 -1 03 43 1 0 0 0 -1 03 44 1 0 0 0 -1 03 45 1 0 0 0 -1 03 46 1 0 0 0 -1 03 47 1 0 0 0 -1 03 48 1 0 0 0 -1 03 49 1 0 0 0 -1 03 50 1 0 0 0 -1 03 51 1 0 0 0 -1 03 52 1 0 0 0 -1 03 53 1 0 0 0 -1 03 54 1 0 0 0 -1 03 55 1 0 0 0 -1 03 56 1 0 0 0 -1 03 57 1 0 0 0 -1 03 58 1 0 0 0 -1 03 59 1 0 0 0 -1 03 60 1 0 0 0 -1 03 61 1 0 0 0 -1 03 62 1 0 0 0 -1 03 63 1 0 0 0 -1 04 00 1 0 0 0 -1 04 01 1 0 0 0 -1 04 02 1 0 0 0 -1 04 03 1 0 0 0 -1 04 04 1 0 0 0 -1 04 05 1 0 0 0 -1 04 06 1 0 0 0 -1 04 07 1 0 0 0 -1 04 08 1 0 0 0 -1 04 09 1 0 0 0 -1 04 10 1 0 0 0 -1 04 11 1 0 0 0 -1 04 12 1 0 0 0 -1 04 13 1 0 0 0 -1 04 14 1 0 0 0 -1 04 15 1 0 0 0 -1 04 16 1 0 0 0 -1 04 17 1 0 0 0 -1 04 18 1 0 0 0 -1 04 19 1 0 0 0 -1 04 20 1 0 0 0 -1 04 21 1 0 0 0 -1 04 22 1 0 0 0 -1 04 23 1 0 0 0 -1 04 24 1 0 0 0 -1 04 25 1 0 0 0 -1 04 26 1 0 0 0 -1 04 27 1 0 0 0 -1 04 28 1 0 0 0 -1 04 29 1 0 0 0 -1 04 30 1 0 0 0 -1 04 31 1 0 0 0 -1 04 32 1 0 0 0 -1 04 33 1 0 0 0 -1 04 34 1 0 0 0 -1 04 35 1 0 0 0 -1 04 36 1 0 0 0 -1 04 37 1 0 0 0 -1 ... 2276 more lines ...
Attachment 3: matrix_config_piggy.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {mask} {en_inj} {hb_en} {en_sfout} {TDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1
Attachment 4: eudaq_config.cfg
[RunControl] EUDAQ_CTRL_PRODUCER_LAST_START = aida_tlu [LogCollector.log] [Producer.aida_tlu] verbose = 0 confid = 20181002 skipconf = 0 # delay start in ms delayStart = 0 #################################################### # DUT IN/OUTPUT # Mask: 0 CONT, 1 SPARE, 2 TRIG, 3 BUSY (1 = driven by TLU, 0 = driven by DUT) # EUDET mode: 7 HDMI1_set = 0x7 HDMI2_set = 0x7 HDMI3_set = 0x7 HDMI4_set = 0x7 # same as above for the clock line, 1 = AIDA mode, 2 = FPGA HDMI1_clk = 1 HDMI2_clk = 0 HDMI3_clk = 1 HDMI4_clk = 1 LEMOclk = 1 # if input, then also adjust clk.txt # Activate channels # Only TLU #DUTMask = 0x0 # Telescope at HDMI1 #DUTMask = 0x1 # Only FEI4 at HDMI2 #DUTMask = 0x2 # Telescope at HDMI1, FEI4 at HDMI2 #DUTMask = 0x3 #Adenium at HDMI3 #DUTMask = 0x1 #Adenium at HDMI1, MPW3 at HDMI3, Monopix2 at HDMI4 DUTMask = 0xD # Define mode: # Each DUT channel has two bits: HDMI1=0&1 bit; HDMI2= 2&3bit; ... # Only the lowest bit is significant: # AIDA mode for each "1st" LSbit = 1 # EUDET modes incl. DUT clocking out each "1st" LSbit = 0 # e.g. 1st and 2nd channel in EUDET mode: 0xF0 #DUTMaskMode = 0xF0 # 1st and 2nd channel are reading out Trigger ID # e.g. only 1st in EUDET mode #DUTMaskMode = 0xFC # 1st is reading out Trigger ID #!!!!!!!!!!!! Check this !!!!!!!!!!!!!!! #DUTMaskMode = 0x01 #I think this is AIDA mode for channel 3 and reading out trigger number #HDMI3 on AIDA with trigger number #DUTMaskMode = 0x31 #HDMI3+4 on AIDA with trigger number DUTMaskMode = 0xF1 # "Mixed mode" to ignore a busy line from a DUT # TLU ignores the telescope busy (at HDMI1) #DUTIgnoreBusy = 0x1 # yes (default, Mixed mode) DUTIgnoreBusy = 0xA #no (EUDET mode) ################################################### # ONLY AUTOTRIGGER #InternalTriggerFreq = 100 # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 7 # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 7 in1_DEL = 0 in2_STR = 7 in2_DEL = 0 in3_STR = 7 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # DAC INPUT THRESHOLD in V DACThreshold0 = -0.4 # Was -0.04, but we get amplyfied signal from NIM module DACThreshold1 = -0.4 # Was -0.04, but we get amplyfied signal from NIM module DACThreshold2 = -0.20 DACThreshold3 = -0.20 DACThreshold4 = -0.20 DACThreshold5 = -0.20 # PMT Power PMT1_V = 0.80 PMT2_V = 0.80 PMT3_V = 0.80 PMT4_V = 0.80 # 2 words 32bit: Hi + Lo # combinations of coincidence are now possible! # Coincidence of input 0 to 3 (telescope) #trigMaskHi = 0x00000000 #trigMaskLo = 0x00008000 # Coincidence of input 0 and 1 trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 # New: Coincidence of any 3 of 4, 4 combinations plus all 4 #trigMaskHi = 0x00000000 #trigMaskLo = 0x0000C880 # EUDAQ2 # Define the data collector to be used by the producer EUDAQ_DC = dc_tlu [DataCollector.dc_tlu] EUDAQ_ID=100 EUDAQ_MN=StdEventMonitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION=5 EUDAQ_FW = native EUDAQ_FW_PATTERN = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_tlu$X" DISABLE_PRINT = 1 ################################### Adenium ##################################### [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=dc_tel [DataCollector.dc_tel] EUDAQ_ID=100 EUDAQ_MN=StdEventMonitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION=1 EUDAQ_FW = native EUDAQ_FW_PATTERN = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_adenium$X" DISABLE_PRINT = 1 ################################### MPW3 ##################################### [Producer.RD50_MPW3] [DataCollector.mpw3_dc] # connection to the monitor EUDAQ_MN = mpw3_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/backup/desy_jul23/run$6R_mpw3$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 SYNC_MODE = 0 [Monitor.mpw3_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [Producer.elog_mpw3] # command (shell script) to execute before starting a run start_cmd = "./copy_configs.sh" #files to attach to the Elog entry files2log = "tmp/peary_config.cfg, tmp/matrix_config_base.txt, tmp/matrix_config_piggy.txt, tmp/eudaq_config.cfg" ################################################ MPX2 ##################################################### [Producer.monopix2] # connection to the data collector EUDAQ_DC = dc_mpx2 ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 # W08R19 #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/20230630_113951_threshold_scan_interpreted.h5 #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/HV_THR25_HVCasc_THR22_10V/20230708_095321_threshold_scan_interpreted.h5 #MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/masked_pixels.yaml #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/HV_THR25_HVCasc_THR22_10V/intermediate/20230630_132140_threshold_scan_interpreted.h5 #MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W02R09/masked_pixels.yaml CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/20230630_112801_global_threshold_tuning_interpreted.h5 MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W02R09/masked_pixels.yaml CHIP_SN = W02R09 CHIP_CMD_CLK = 160.0 #VCLIP = 255 #IBIAS = 100 # W02R09 HV FE #ITHR = 32 #VRESET = 100 #VCASP = 40 #IBIAS = 50 #ICASN = 0 #ITUNE = 100 #VCASC = 150 # W02R09 NFE #ITHR = 50 #VRESET = #VCASP = #IBIAS = 80 ICASN = 4 ITUNE = 0 #VCASC = 164 #overriding values in "scan_configuration" #when none given default ones are being used START_ROW = 0 STOP_ROW = 512 START_COLUMN = 100 STOP_COLUMN = 224 WAIT_FOR_FPGA = 1 CONFIG_ID = 46 ELOG_CATEGORY = Debug # Debug, Beam, VoltageScan, Scan COMMENT_IN_CONF = "PWELL = 5V PSUB = 6V, neutron-irradiated chip, non-local-tuned settings for Vienna chip, NF, unknown thr, 0 deg" ELOG_OUTPUT_PATH = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs" [Producer.hameg] HV = 3 BIAS = 6 SERIAL_PORT = /dev/ttyUSB0 [Monitor.monopix2_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [DataCollector.dc_mpx2] # connection to the monitor EUDAQ_MN = monopix2_mon EUDAQ_FW = native #path to store .raw file to, $3R is replaced by 3 digit run number, $12D -> 12 character date, $X -> .raw EUDAQ_FW_PATTERN = /media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_monopix2$X #fraction of events being sent to the monitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters #disable output of event to bash, is spamming terminal otherwise DISABLE_PRINT = 1 [Producer.tpx3] threshold = 1185 XMLConfig = /home/silicon/mpw3/spidr3_eudaq_operation/config_W2_E5_test_masked.t3x external_clock = 1 EUDAQ_DC = spidr_dc [DataCollector.spidr_dc] EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/backup/desy_jul23/run$6R_tpx3$X DISABLE_PRINT = 1
496	Sun Jul 16 10:44:10 2023	tb-crew	cooled unirradiated	1336	RD50-MPW3	unknown	90	unirradiated	1.9K	4.2	Low Flux Low	electron	Good	16.07.2023 10:38:54	16.07.2023 10:39:24	0
automatic log for run 1336 Comment: only 3 top rows, cooled, thr = 1.00V
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW3] this_config_file = config_piggy_new.cfg #SEC::MISC accept_tlu_trigger = 0 enable_readout = 1 calib_file_base = calib_base.txt config_si5345 = clock_config.txt execute_file = execute.txt i2c_addr_base = 0x41 i2c_dev = /dev/i2c-9 matrix_config = matrix_config_base.txt dcol_hb = 5 disable_clk = 0 #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 0 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1.0 th__i = 3 [RD50_MPW3_Piggy] this_config_file = config_piggy_new.cfg #SEC::MISC calib_file = calib_piggy.txt execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 matrix_config = matrix_config_piggy.txt piggy_attached = 0 #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36
Attachment 2: matrix_config_base.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {mask} {en_inj} {hb_en} {en_sfout} {TDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 1 0 0 0 -1 00 01 1 0 0 0 -1 00 02 1 0 0 0 -1 00 03 1 0 0 0 -1 00 04 1 0 0 0 -1 00 05 1 0 0 0 -1 00 06 1 0 0 0 -1 00 07 1 0 0 0 -1 00 08 1 0 0 0 -1 00 09 1 0 0 0 -1 00 10 1 0 0 0 -1 00 11 1 0 0 0 -1 00 12 1 0 0 0 -1 00 13 1 0 0 0 -1 00 14 1 0 0 0 -1 00 15 1 0 0 0 -1 00 16 1 0 0 0 -1 00 17 1 0 0 0 -1 00 18 1 0 0 0 -1 00 19 1 0 0 0 -1 00 20 1 0 0 0 -1 00 21 1 0 0 0 -1 00 22 1 0 0 0 -1 00 23 1 0 0 0 -1 00 24 1 0 0 0 -1 00 25 1 0 0 0 -1 00 26 1 0 0 0 -1 00 27 1 0 0 0 -1 00 28 1 0 0 0 -1 00 29 1 0 0 0 -1 00 30 1 0 0 0 -1 00 31 1 0 0 0 -1 00 32 1 0 0 0 -1 00 33 1 0 0 0 -1 00 34 1 0 0 0 -1 00 35 1 0 0 0 -1 00 36 1 0 0 0 -1 00 37 1 0 0 0 -1 00 38 1 0 0 0 -1 00 39 1 0 0 0 -1 00 40 1 0 0 0 -1 00 41 1 0 0 0 -1 00 42 1 0 0 0 -1 00 43 1 0 0 0 -1 00 44 1 0 0 0 -1 00 45 1 0 0 0 -1 00 46 1 0 0 0 -1 00 47 1 0 0 0 -1 00 48 1 0 0 0 -1 00 49 1 0 0 0 -1 00 50 1 0 0 0 -1 00 51 1 0 0 0 -1 00 52 1 0 0 0 -1 00 53 1 0 0 0 -1 00 54 1 0 0 0 -1 00 55 1 0 0 0 -1 00 56 1 0 0 0 -1 00 57 1 0 0 0 -1 00 58 1 0 0 0 -1 00 59 1 0 0 0 -1 00 60 1 0 0 0 -1 00 61 1 0 0 0 -1 00 62 1 0 0 0 -1 00 63 1 0 0 0 -1 01 00 1 0 0 0 -1 01 01 1 0 0 0 -1 01 02 1 0 0 0 -1 01 03 1 0 0 0 -1 01 04 1 0 0 0 -1 01 05 1 0 0 0 -1 01 06 1 0 0 0 -1 01 07 1 0 0 0 -1 01 08 1 0 0 0 -1 01 09 1 0 0 0 -1 01 10 1 0 0 0 -1 01 11 1 0 0 0 -1 01 12 1 0 0 0 -1 01 13 1 0 0 0 -1 01 14 1 0 0 0 -1 01 15 1 0 0 0 -1 01 16 1 0 0 0 -1 01 17 1 0 0 0 -1 01 18 1 0 0 0 -1 01 19 1 0 0 0 -1 01 20 1 0 0 0 -1 01 21 1 0 0 0 -1 01 22 1 0 0 0 -1 01 23 1 0 0 0 -1 01 24 1 0 0 0 -1 01 25 1 0 0 0 -1 01 26 1 0 0 0 -1 01 27 1 0 0 0 -1 01 28 1 0 0 0 -1 01 29 1 0 0 0 -1 01 30 1 0 0 0 -1 01 31 1 0 0 0 -1 01 32 1 0 0 0 -1 01 33 1 0 0 0 -1 01 34 1 0 0 0 -1 01 35 1 0 0 0 -1 01 36 1 0 0 0 -1 01 37 1 0 0 0 -1 01 38 1 0 0 0 -1 01 39 1 0 0 0 -1 01 40 1 0 0 0 -1 01 41 1 0 0 0 -1 01 42 1 0 0 0 -1 01 43 1 0 0 0 -1 01 44 1 0 0 0 -1 01 45 1 0 0 0 -1 01 46 1 0 0 0 -1 01 47 1 0 0 0 -1 01 48 1 0 0 0 -1 01 49 1 0 0 0 -1 01 50 1 0 0 0 -1 01 51 1 0 0 0 -1 01 52 1 0 0 0 -1 01 53 1 0 0 0 -1 01 54 1 0 0 0 -1 01 55 1 0 0 0 -1 01 56 1 0 0 0 -1 01 57 1 0 0 0 -1 01 58 1 0 0 0 -1 01 59 1 0 0 0 -1 01 60 1 0 0 0 -1 01 61 1 0 0 0 -1 01 62 1 0 0 0 -1 01 63 1 0 0 0 -1 02 00 1 0 0 0 -1 02 01 1 0 0 0 -1 02 02 1 0 0 0 -1 02 03 1 0 0 0 -1 02 04 1 0 0 0 -1 02 05 1 0 0 0 -1 02 06 1 0 0 0 -1 02 07 1 0 0 0 -1 02 08 1 0 0 0 -1 02 09 1 0 0 0 -1 02 10 1 0 0 0 -1 02 11 1 0 0 0 -1 02 12 1 0 0 0 -1 02 13 1 0 0 0 -1 02 14 1 0 0 0 -1 02 15 1 0 0 0 -1 02 16 1 0 0 0 -1 02 17 1 0 0 0 -1 02 18 1 0 0 0 -1 02 19 1 0 0 0 -1 02 20 1 0 0 0 -1 02 21 1 0 0 0 -1 02 22 1 0 0 0 -1 02 23 1 0 0 0 -1 02 24 1 0 0 0 -1 02 25 1 0 0 0 -1 02 26 1 0 0 0 -1 02 27 1 0 0 0 -1 02 28 1 0 0 0 -1 02 29 1 0 0 0 -1 02 30 1 0 0 0 -1 02 31 1 0 0 0 -1 02 32 1 0 0 0 -1 02 33 1 0 0 0 -1 02 34 1 0 0 0 -1 02 35 1 0 0 0 -1 02 36 1 0 0 0 -1 02 37 1 0 0 0 -1 02 38 1 0 0 0 -1 02 39 1 0 0 0 -1 02 40 1 0 0 0 -1 02 41 1 0 0 0 -1 02 42 1 0 0 0 -1 02 43 1 0 0 0 -1 02 44 1 0 0 0 -1 02 45 1 0 0 0 -1 02 46 1 0 0 0 -1 02 47 1 0 0 0 -1 02 48 1 0 0 0 -1 02 49 1 0 0 0 -1 02 50 1 0 0 0 -1 02 51 1 0 0 0 -1 02 52 1 0 0 0 -1 02 53 1 0 0 0 -1 02 54 1 0 0 0 -1 02 55 1 0 0 0 -1 02 56 1 0 0 0 -1 02 57 1 0 0 0 -1 02 58 1 0 0 0 -1 02 59 1 0 0 0 -1 02 60 1 0 0 0 -1 02 61 1 0 0 0 -1 02 62 1 0 0 0 -1 02 63 1 0 0 0 -1 03 00 1 0 0 0 -1 03 01 1 0 0 0 -1 03 02 1 0 0 0 -1 03 03 1 0 0 0 -1 03 04 1 0 0 0 -1 03 05 1 0 0 0 -1 03 06 1 0 0 0 -1 03 07 1 0 0 0 -1 03 08 1 0 0 0 -1 03 09 1 0 0 0 -1 03 10 1 0 0 0 -1 03 11 1 0 0 0 -1 03 12 1 0 0 0 -1 03 13 1 0 0 0 -1 03 14 1 0 0 0 -1 03 15 1 0 0 0 -1 03 16 1 0 0 0 -1 03 17 1 0 0 0 -1 03 18 1 0 0 0 -1 03 19 1 0 0 0 -1 03 20 1 0 0 0 -1 03 21 1 0 0 0 -1 03 22 1 0 0 0 -1 03 23 1 0 0 0 -1 03 24 1 0 0 0 -1 03 25 1 0 0 0 -1 03 26 1 0 0 0 -1 03 27 1 0 0 0 -1 03 28 1 0 0 0 -1 03 29 1 0 0 0 -1 03 30 1 0 0 0 -1 03 31 1 0 0 0 -1 03 32 1 0 0 0 -1 03 33 1 0 0 0 -1 03 34 1 0 0 0 -1 03 35 1 0 0 0 -1 03 36 1 0 0 0 -1 03 37 1 0 0 0 -1 03 38 1 0 0 0 -1 03 39 1 0 0 0 -1 03 40 1 0 0 0 -1 03 41 1 0 0 0 -1 03 42 1 0 0 0 -1 03 43 1 0 0 0 -1 03 44 1 0 0 0 -1 03 45 1 0 0 0 -1 03 46 1 0 0 0 -1 03 47 1 0 0 0 -1 03 48 1 0 0 0 -1 03 49 1 0 0 0 -1 03 50 1 0 0 0 -1 03 51 1 0 0 0 -1 03 52 1 0 0 0 -1 03 53 1 0 0 0 -1 03 54 1 0 0 0 -1 03 55 1 0 0 0 -1 03 56 1 0 0 0 -1 03 57 1 0 0 0 -1 03 58 1 0 0 0 -1 03 59 1 0 0 0 -1 03 60 1 0 0 0 -1 03 61 1 0 0 0 -1 03 62 1 0 0 0 -1 03 63 1 0 0 0 -1 04 00 1 0 0 0 -1 04 01 1 0 0 0 -1 04 02 1 0 0 0 -1 04 03 1 0 0 0 -1 04 04 1 0 0 0 -1 04 05 1 0 0 0 -1 04 06 1 0 0 0 -1 04 07 1 0 0 0 -1 04 08 1 0 0 0 -1 04 09 1 0 0 0 -1 04 10 1 0 0 0 -1 04 11 1 0 0 0 -1 04 12 1 0 0 0 -1 04 13 1 0 0 0 -1 04 14 1 0 0 0 -1 04 15 1 0 0 0 -1 04 16 1 0 0 0 -1 04 17 1 0 0 0 -1 04 18 1 0 0 0 -1 04 19 1 0 0 0 -1 04 20 1 0 0 0 -1 04 21 1 0 0 0 -1 04 22 1 0 0 0 -1 04 23 1 0 0 0 -1 04 24 1 0 0 0 -1 04 25 1 0 0 0 -1 04 26 1 0 0 0 -1 04 27 1 0 0 0 -1 04 28 1 0 0 0 -1 04 29 1 0 0 0 -1 04 30 1 0 0 0 -1 04 31 1 0 0 0 -1 04 32 1 0 0 0 -1 04 33 1 0 0 0 -1 04 34 1 0 0 0 -1 04 35 1 0 0 0 -1 04 36 1 0 0 0 -1 04 37 1 0 0 0 -1 ... 3610 more lines ...
Attachment 3: matrix_config_piggy.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {mask} {en_inj} {hb_en} {en_sfout} {TDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1
Attachment 4: eudaq_config.cfg
[RunControl] EUDAQ_CTRL_PRODUCER_LAST_START = aida_tlu [LogCollector.log] [Producer.aida_tlu] verbose = 0 confid = 20181002 skipconf = 0 # delay start in ms delayStart = 0 #################################################### # DUT IN/OUTPUT # Mask: 0 CONT, 1 SPARE, 2 TRIG, 3 BUSY (1 = driven by TLU, 0 = driven by DUT) # EUDET mode: 7 HDMI1_set = 0x7 HDMI2_set = 0x7 HDMI3_set = 0x7 HDMI4_set = 0x7 # same as above for the clock line, 1 = AIDA mode, 2 = FPGA HDMI1_clk = 1 HDMI2_clk = 0 HDMI3_clk = 1 HDMI4_clk = 1 LEMOclk = 1 # if input, then also adjust clk.txt # Activate channels # Only TLU #DUTMask = 0x0 # Telescope at HDMI1 #DUTMask = 0x1 # Only FEI4 at HDMI2 #DUTMask = 0x2 # Telescope at HDMI1, FEI4 at HDMI2 #DUTMask = 0x3 #Adenium at HDMI3 #DUTMask = 0x1 #Adenium at HDMI1, MPW3 at HDMI3, Monopix2 at HDMI4 DUTMask = 0xD # Define mode: # Each DUT channel has two bits: HDMI1=0&1 bit; HDMI2= 2&3bit; ... # Only the lowest bit is significant: # AIDA mode for each "1st" LSbit = 1 # EUDET modes incl. DUT clocking out each "1st" LSbit = 0 # e.g. 1st and 2nd channel in EUDET mode: 0xF0 #DUTMaskMode = 0xF0 # 1st and 2nd channel are reading out Trigger ID # e.g. only 1st in EUDET mode #DUTMaskMode = 0xFC # 1st is reading out Trigger ID #!!!!!!!!!!!! Check this !!!!!!!!!!!!!!! #DUTMaskMode = 0x01 #I think this is AIDA mode for channel 3 and reading out trigger number #HDMI3 on AIDA with trigger number #DUTMaskMode = 0x31 #HDMI3+4 on AIDA with trigger number DUTMaskMode = 0xF1 # "Mixed mode" to ignore a busy line from a DUT # TLU ignores the telescope busy (at HDMI1) #DUTIgnoreBusy = 0x1 # yes (default, Mixed mode) DUTIgnoreBusy = 0xA #no (EUDET mode) ################################################### # ONLY AUTOTRIGGER #InternalTriggerFreq = 100 # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 7 # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 7 in1_DEL = 0 in2_STR = 7 in2_DEL = 0 in3_STR = 7 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # DAC INPUT THRESHOLD in V DACThreshold0 = -0.4 # Was -0.04, but we get amplyfied signal from NIM module DACThreshold1 = -0.4 # Was -0.04, but we get amplyfied signal from NIM module DACThreshold2 = -0.20 DACThreshold3 = -0.20 DACThreshold4 = -0.20 DACThreshold5 = -0.20 # PMT Power PMT1_V = 0.80 PMT2_V = 0.80 PMT3_V = 0.80 PMT4_V = 0.80 # 2 words 32bit: Hi + Lo # combinations of coincidence are now possible! # Coincidence of input 0 to 3 (telescope) #trigMaskHi = 0x00000000 #trigMaskLo = 0x00008000 # Coincidence of input 0 and 1 trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 # New: Coincidence of any 3 of 4, 4 combinations plus all 4 #trigMaskHi = 0x00000000 #trigMaskLo = 0x0000C880 # EUDAQ2 # Define the data collector to be used by the producer EUDAQ_DC = dc_tlu [DataCollector.dc_tlu] EUDAQ_ID=100 EUDAQ_MN=StdEventMonitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION=5 EUDAQ_FW = native EUDAQ_FW_PATTERN = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_tlu$X" DISABLE_PRINT = 1 ################################### Adenium ##################################### [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=dc_tel [DataCollector.dc_tel] EUDAQ_ID=100 EUDAQ_MN=StdEventMonitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION=1 EUDAQ_FW = native EUDAQ_FW_PATTERN = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_adenium$X" DISABLE_PRINT = 1 ################################### MPW3 ##################################### [Producer.RD50_MPW3] [DataCollector.mpw3_dc] # connection to the monitor EUDAQ_MN = mpw3_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/backup/desy_jul23/run$6R_mpw3$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 SYNC_MODE = 0 [Monitor.mpw3_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [Producer.elog_mpw3] # command (shell script) to execute before starting a run start_cmd = "./copy_configs.sh" #files to attach to the Elog entry files2log = "tmp/peary_config.cfg, tmp/matrix_config_base.txt, tmp/matrix_config_piggy.txt, tmp/eudaq_config.cfg" ################################################ MPX2 ##################################################### [Producer.monopix2] # connection to the data collector EUDAQ_DC = dc_mpx2 ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 # W08R19 #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/20230630_113951_threshold_scan_interpreted.h5 #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/HV_THR25_HVCasc_THR22_10V/20230708_095321_threshold_scan_interpreted.h5 #MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/masked_pixels.yaml #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/HV_THR25_HVCasc_THR22_10V/intermediate/20230630_132140_threshold_scan_interpreted.h5 #MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W02R09/masked_pixels.yaml CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/20230630_112801_global_threshold_tuning_interpreted.h5 MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W02R09/masked_pixels.yaml CHIP_SN = W02R09 CHIP_CMD_CLK = 160.0 #VCLIP = 255 #IBIAS = 100 # W02R09 HV FE #ITHR = 32 #VRESET = 100 #VCASP = 40 #IBIAS = 50 #ICASN = 0 #ITUNE = 100 #VCASC = 150 # W02R09 NFE #ITHR = 50 #VRESET = #VCASP = #IBIAS = 80 ICASN = 4 ITUNE = 0 #VCASC = 164 #overriding values in "scan_configuration" #when none given default ones are being used START_ROW = 0 STOP_ROW = 512 START_COLUMN = 100 STOP_COLUMN = 224 WAIT_FOR_FPGA = 1 CONFIG_ID = 46 ELOG_CATEGORY = Debug # Debug, Beam, VoltageScan, Scan COMMENT_IN_CONF = "PWELL = 5V PSUB = 6V, neutron-irradiated chip, non-local-tuned settings for Vienna chip, NF, unknown thr, 0 deg" ELOG_OUTPUT_PATH = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs" [Producer.hameg] HV = 3 BIAS = 6 SERIAL_PORT = /dev/ttyUSB0 [Monitor.monopix2_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [DataCollector.dc_mpx2] # connection to the monitor EUDAQ_MN = monopix2_mon EUDAQ_FW = native #path to store .raw file to, $3R is replaced by 3 digit run number, $12D -> 12 character date, $X -> .raw EUDAQ_FW_PATTERN = /media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_monopix2$X #fraction of events being sent to the monitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters #disable output of event to bash, is spamming terminal otherwise DISABLE_PRINT = 1 [Producer.tpx3] threshold = 1185 XMLConfig = /home/silicon/mpw3/spidr3_eudaq_operation/config_W2_E5_test_masked.t3x external_clock = 1 EUDAQ_DC = spidr_dc [DataCollector.spidr_dc] EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/backup/desy_jul23/run$6R_tpx3$X DISABLE_PRINT = 1
497	Sun Jul 16 10:45:45 2023	tb-crew	cooled unirradiated	1337	RD50-MPW3	unknown	90	unirradiated	1.9K	4.2	Low Flux Low	electron	Good	16.07.2023 10:40:22	16.07.2023 10:40:59	0
automatic log for run 1337 Comment: only 3 top rows, cooled, thr = 1.00V, noisy pixel
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW3] this_config_file = config_piggy_new.cfg #SEC::MISC accept_tlu_trigger = 0 enable_readout = 1 calib_file_base = calib_base.txt config_si5345 = clock_config.txt execute_file = execute.txt i2c_addr_base = 0x41 i2c_dev = /dev/i2c-9 matrix_config = matrix_config_base.txt dcol_hb = 5 disable_clk = 0 #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 0 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1.0 th__i = 3 [RD50_MPW3_Piggy] this_config_file = config_piggy_new.cfg #SEC::MISC calib_file = calib_piggy.txt execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 matrix_config = matrix_config_piggy.txt piggy_attached = 0 #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36
Attachment 2: matrix_config_base.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {mask} {en_inj} {hb_en} {en_sfout} {TDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 1 0 0 0 -1 00 01 1 0 0 0 -1 00 02 1 0 0 0 -1 00 03 1 0 0 0 -1 00 04 1 0 0 0 -1 00 05 1 0 0 0 -1 00 06 1 0 0 0 -1 00 07 1 0 0 0 -1 00 08 1 0 0 0 -1 00 09 1 0 0 0 -1 00 10 1 0 0 0 -1 00 11 1 0 0 0 -1 00 12 1 0 0 0 -1 00 13 1 0 0 0 -1 00 14 1 0 0 0 -1 00 15 1 0 0 0 -1 00 16 1 0 0 0 -1 00 17 1 0 0 0 -1 00 18 1 0 0 0 -1 00 19 1 0 0 0 -1 00 20 1 0 0 0 -1 00 21 1 0 0 0 -1 00 22 1 0 0 0 -1 00 23 1 0 0 0 -1 00 24 1 0 0 0 -1 00 25 1 0 0 0 -1 00 26 1 0 0 0 -1 00 27 1 0 0 0 -1 00 28 1 0 0 0 -1 00 29 1 0 0 0 -1 00 30 1 0 0 0 -1 00 31 1 0 0 0 -1 00 32 1 0 0 0 -1 00 33 1 0 0 0 -1 00 34 1 0 0 0 -1 00 35 1 0 0 0 -1 00 36 1 0 0 0 -1 00 37 1 0 0 0 -1 00 38 1 0 0 0 -1 00 39 1 0 0 0 -1 00 40 1 0 0 0 -1 00 41 1 0 0 0 -1 00 42 1 0 0 0 -1 00 43 1 0 0 0 -1 00 44 1 0 0 0 -1 00 45 1 0 0 0 -1 00 46 1 0 0 0 -1 00 47 1 0 0 0 -1 00 48 1 0 0 0 -1 00 49 1 0 0 0 -1 00 50 1 0 0 0 -1 00 51 1 0 0 0 -1 00 52 1 0 0 0 -1 00 53 1 0 0 0 -1 00 54 1 0 0 0 -1 00 55 1 0 0 0 -1 00 56 1 0 0 0 -1 00 57 1 0 0 0 -1 00 58 1 0 0 0 -1 00 59 1 0 0 0 -1 00 60 1 0 0 0 -1 00 61 1 0 0 0 -1 00 62 1 0 0 0 -1 00 63 1 0 0 0 -1 01 00 1 0 0 0 -1 01 01 1 0 0 0 -1 01 02 1 0 0 0 -1 01 03 1 0 0 0 -1 01 04 1 0 0 0 -1 01 05 1 0 0 0 -1 01 06 1 0 0 0 -1 01 07 1 0 0 0 -1 01 08 1 0 0 0 -1 01 09 1 0 0 0 -1 01 10 1 0 0 0 -1 01 11 1 0 0 0 -1 01 12 1 0 0 0 -1 01 13 1 0 0 0 -1 01 14 1 0 0 0 -1 01 15 1 0 0 0 -1 01 16 1 0 0 0 -1 01 17 1 0 0 0 -1 01 18 1 0 0 0 -1 01 19 1 0 0 0 -1 01 20 1 0 0 0 -1 01 21 1 0 0 0 -1 01 22 1 0 0 0 -1 01 23 1 0 0 0 -1 01 24 1 0 0 0 -1 01 25 1 0 0 0 -1 01 26 1 0 0 0 -1 01 27 1 0 0 0 -1 01 28 1 0 0 0 -1 01 29 1 0 0 0 -1 01 30 1 0 0 0 -1 01 31 1 0 0 0 -1 01 32 1 0 0 0 -1 01 33 1 0 0 0 -1 01 34 1 0 0 0 -1 01 35 1 0 0 0 -1 01 36 1 0 0 0 -1 01 37 1 0 0 0 -1 01 38 1 0 0 0 -1 01 39 1 0 0 0 -1 01 40 1 0 0 0 -1 01 41 1 0 0 0 -1 01 42 1 0 0 0 -1 01 43 1 0 0 0 -1 01 44 1 0 0 0 -1 01 45 1 0 0 0 -1 01 46 1 0 0 0 -1 01 47 1 0 0 0 -1 01 48 1 0 0 0 -1 01 49 1 0 0 0 -1 01 50 1 0 0 0 -1 01 51 1 0 0 0 -1 01 52 1 0 0 0 -1 01 53 1 0 0 0 -1 01 54 1 0 0 0 -1 01 55 1 0 0 0 -1 01 56 1 0 0 0 -1 01 57 1 0 0 0 -1 01 58 1 0 0 0 -1 01 59 1 0 0 0 -1 01 60 1 0 0 0 -1 01 61 1 0 0 0 -1 01 62 1 0 0 0 -1 01 63 1 0 0 0 -1 02 00 1 0 0 0 -1 02 01 1 0 0 0 -1 02 02 1 0 0 0 -1 02 03 1 0 0 0 -1 02 04 1 0 0 0 -1 02 05 1 0 0 0 -1 02 06 1 0 0 0 -1 02 07 1 0 0 0 -1 02 08 1 0 0 0 -1 02 09 1 0 0 0 -1 02 10 1 0 0 0 -1 02 11 1 0 0 0 -1 02 12 1 0 0 0 -1 02 13 1 0 0 0 -1 02 14 1 0 0 0 -1 02 15 1 0 0 0 -1 02 16 1 0 0 0 -1 02 17 1 0 0 0 -1 02 18 1 0 0 0 -1 02 19 1 0 0 0 -1 02 20 1 0 0 0 -1 02 21 1 0 0 0 -1 02 22 1 0 0 0 -1 02 23 1 0 0 0 -1 02 24 1 0 0 0 -1 02 25 1 0 0 0 -1 02 26 1 0 0 0 -1 02 27 1 0 0 0 -1 02 28 1 0 0 0 -1 02 29 1 0 0 0 -1 02 30 1 0 0 0 -1 02 31 1 0 0 0 -1 02 32 1 0 0 0 -1 02 33 1 0 0 0 -1 02 34 1 0 0 0 -1 02 35 1 0 0 0 -1 02 36 1 0 0 0 -1 02 37 1 0 0 0 -1 02 38 1 0 0 0 -1 02 39 1 0 0 0 -1 02 40 1 0 0 0 -1 02 41 1 0 0 0 -1 02 42 1 0 0 0 -1 02 43 1 0 0 0 -1 02 44 1 0 0 0 -1 02 45 1 0 0 0 -1 02 46 1 0 0 0 -1 02 47 1 0 0 0 -1 02 48 1 0 0 0 -1 02 49 1 0 0 0 -1 02 50 1 0 0 0 -1 02 51 1 0 0 0 -1 02 52 1 0 0 0 -1 02 53 1 0 0 0 -1 02 54 1 0 0 0 -1 02 55 1 0 0 0 -1 02 56 1 0 0 0 -1 02 57 1 0 0 0 -1 02 58 1 0 0 0 -1 02 59 1 0 0 0 -1 02 60 1 0 0 0 -1 02 61 1 0 0 0 -1 02 62 1 0 0 0 -1 02 63 1 0 0 0 -1 03 00 1 0 0 0 -1 03 01 1 0 0 0 -1 03 02 1 0 0 0 -1 03 03 1 0 0 0 -1 03 04 1 0 0 0 -1 03 05 1 0 0 0 -1 03 06 1 0 0 0 -1 03 07 1 0 0 0 -1 03 08 1 0 0 0 -1 03 09 1 0 0 0 -1 03 10 1 0 0 0 -1 03 11 1 0 0 0 -1 03 12 1 0 0 0 -1 03 13 1 0 0 0 -1 03 14 1 0 0 0 -1 03 15 1 0 0 0 -1 03 16 1 0 0 0 -1 03 17 1 0 0 0 -1 03 18 1 0 0 0 -1 03 19 1 0 0 0 -1 03 20 1 0 0 0 -1 03 21 1 0 0 0 -1 03 22 1 0 0 0 -1 03 23 1 0 0 0 -1 03 24 1 0 0 0 -1 03 25 1 0 0 0 -1 03 26 1 0 0 0 -1 03 27 1 0 0 0 -1 03 28 1 0 0 0 -1 03 29 1 0 0 0 -1 03 30 1 0 0 0 -1 03 31 1 0 0 0 -1 03 32 1 0 0 0 -1 03 33 1 0 0 0 -1 03 34 1 0 0 0 -1 03 35 1 0 0 0 -1 03 36 1 0 0 0 -1 03 37 1 0 0 0 -1 03 38 1 0 0 0 -1 03 39 1 0 0 0 -1 03 40 1 0 0 0 -1 03 41 1 0 0 0 -1 03 42 1 0 0 0 -1 03 43 1 0 0 0 -1 03 44 1 0 0 0 -1 03 45 1 0 0 0 -1 03 46 1 0 0 0 -1 03 47 1 0 0 0 -1 03 48 1 0 0 0 -1 03 49 1 0 0 0 -1 03 50 1 0 0 0 -1 03 51 1 0 0 0 -1 03 52 1 0 0 0 -1 03 53 1 0 0 0 -1 03 54 1 0 0 0 -1 03 55 1 0 0 0 -1 03 56 1 0 0 0 -1 03 57 1 0 0 0 -1 03 58 1 0 0 0 -1 03 59 1 0 0 0 -1 03 60 1 0 0 0 -1 03 61 1 0 0 0 -1 03 62 1 0 0 0 -1 03 63 1 0 0 0 -1 04 00 1 0 0 0 -1 04 01 1 0 0 0 -1 04 02 1 0 0 0 -1 04 03 1 0 0 0 -1 04 04 1 0 0 0 -1 04 05 1 0 0 0 -1 04 06 1 0 0 0 -1 04 07 1 0 0 0 -1 04 08 1 0 0 0 -1 04 09 1 0 0 0 -1 04 10 1 0 0 0 -1 04 11 1 0 0 0 -1 04 12 1 0 0 0 -1 04 13 1 0 0 0 -1 04 14 1 0 0 0 -1 04 15 1 0 0 0 -1 04 16 1 0 0 0 -1 04 17 1 0 0 0 -1 04 18 1 0 0 0 -1 04 19 1 0 0 0 -1 04 20 1 0 0 0 -1 04 21 1 0 0 0 -1 04 22 1 0 0 0 -1 04 23 1 0 0 0 -1 04 24 1 0 0 0 -1 04 25 1 0 0 0 -1 04 26 1 0 0 0 -1 04 27 1 0 0 0 -1 04 28 1 0 0 0 -1 04 29 1 0 0 0 -1 04 30 1 0 0 0 -1 04 31 1 0 0 0 -1 04 32 1 0 0 0 -1 04 33 1 0 0 0 -1 04 34 1 0 0 0 -1 04 35 1 0 0 0 -1 04 36 1 0 0 0 -1 04 37 1 0 0 0 -1 ... 3610 more lines ...
Attachment 3: matrix_config_piggy.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {mask} {en_inj} {hb_en} {en_sfout} {TDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1
Attachment 4: eudaq_config.cfg
[RunControl] EUDAQ_CTRL_PRODUCER_LAST_START = aida_tlu [LogCollector.log] [Producer.aida_tlu] verbose = 0 confid = 20181002 skipconf = 0 # delay start in ms delayStart = 0 #################################################### # DUT IN/OUTPUT # Mask: 0 CONT, 1 SPARE, 2 TRIG, 3 BUSY (1 = driven by TLU, 0 = driven by DUT) # EUDET mode: 7 HDMI1_set = 0x7 HDMI2_set = 0x7 HDMI3_set = 0x7 HDMI4_set = 0x7 # same as above for the clock line, 1 = AIDA mode, 2 = FPGA HDMI1_clk = 1 HDMI2_clk = 0 HDMI3_clk = 1 HDMI4_clk = 1 LEMOclk = 1 # if input, then also adjust clk.txt # Activate channels # Only TLU #DUTMask = 0x0 # Telescope at HDMI1 #DUTMask = 0x1 # Only FEI4 at HDMI2 #DUTMask = 0x2 # Telescope at HDMI1, FEI4 at HDMI2 #DUTMask = 0x3 #Adenium at HDMI3 #DUTMask = 0x1 #Adenium at HDMI1, MPW3 at HDMI3, Monopix2 at HDMI4 DUTMask = 0xD # Define mode: # Each DUT channel has two bits: HDMI1=0&1 bit; HDMI2= 2&3bit; ... # Only the lowest bit is significant: # AIDA mode for each "1st" LSbit = 1 # EUDET modes incl. DUT clocking out each "1st" LSbit = 0 # e.g. 1st and 2nd channel in EUDET mode: 0xF0 #DUTMaskMode = 0xF0 # 1st and 2nd channel are reading out Trigger ID # e.g. only 1st in EUDET mode #DUTMaskMode = 0xFC # 1st is reading out Trigger ID #!!!!!!!!!!!! Check this !!!!!!!!!!!!!!! #DUTMaskMode = 0x01 #I think this is AIDA mode for channel 3 and reading out trigger number #HDMI3 on AIDA with trigger number #DUTMaskMode = 0x31 #HDMI3+4 on AIDA with trigger number DUTMaskMode = 0xF1 # "Mixed mode" to ignore a busy line from a DUT # TLU ignores the telescope busy (at HDMI1) #DUTIgnoreBusy = 0x1 # yes (default, Mixed mode) DUTIgnoreBusy = 0xA #no (EUDET mode) ################################################### # ONLY AUTOTRIGGER #InternalTriggerFreq = 100 # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 7 # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 7 in1_DEL = 0 in2_STR = 7 in2_DEL = 0 in3_STR = 7 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # DAC INPUT THRESHOLD in V DACThreshold0 = -0.4 # Was -0.04, but we get amplyfied signal from NIM module DACThreshold1 = -0.4 # Was -0.04, but we get amplyfied signal from NIM module DACThreshold2 = -0.20 DACThreshold3 = -0.20 DACThreshold4 = -0.20 DACThreshold5 = -0.20 # PMT Power PMT1_V = 0.80 PMT2_V = 0.80 PMT3_V = 0.80 PMT4_V = 0.80 # 2 words 32bit: Hi + Lo # combinations of coincidence are now possible! # Coincidence of input 0 to 3 (telescope) #trigMaskHi = 0x00000000 #trigMaskLo = 0x00008000 # Coincidence of input 0 and 1 trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 # New: Coincidence of any 3 of 4, 4 combinations plus all 4 #trigMaskHi = 0x00000000 #trigMaskLo = 0x0000C880 # EUDAQ2 # Define the data collector to be used by the producer EUDAQ_DC = dc_tlu [DataCollector.dc_tlu] EUDAQ_ID=100 EUDAQ_MN=StdEventMonitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION=5 EUDAQ_FW = native EUDAQ_FW_PATTERN = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_tlu$X" DISABLE_PRINT = 1 ################################### Adenium ##################################### [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=dc_tel [DataCollector.dc_tel] EUDAQ_ID=100 EUDAQ_MN=StdEventMonitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION=1 EUDAQ_FW = native EUDAQ_FW_PATTERN = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_adenium$X" DISABLE_PRINT = 1 ################################### MPW3 ##################################### [Producer.RD50_MPW3] [DataCollector.mpw3_dc] # connection to the monitor EUDAQ_MN = mpw3_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/backup/desy_jul23/run$6R_mpw3$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 SYNC_MODE = 0 [Monitor.mpw3_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [Producer.elog_mpw3] # command (shell script) to execute before starting a run start_cmd = "./copy_configs.sh" #files to attach to the Elog entry files2log = "tmp/peary_config.cfg, tmp/matrix_config_base.txt, tmp/matrix_config_piggy.txt, tmp/eudaq_config.cfg" ################################################ MPX2 ##################################################### [Producer.monopix2] # connection to the data collector EUDAQ_DC = dc_mpx2 ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 # W08R19 #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/20230630_113951_threshold_scan_interpreted.h5 #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/HV_THR25_HVCasc_THR22_10V/20230708_095321_threshold_scan_interpreted.h5 #MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/masked_pixels.yaml #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/HV_THR25_HVCasc_THR22_10V/intermediate/20230630_132140_threshold_scan_interpreted.h5 #MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W02R09/masked_pixels.yaml CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/20230630_112801_global_threshold_tuning_interpreted.h5 MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W02R09/masked_pixels.yaml CHIP_SN = W02R09 CHIP_CMD_CLK = 160.0 #VCLIP = 255 #IBIAS = 100 # W02R09 HV FE #ITHR = 32 #VRESET = 100 #VCASP = 40 #IBIAS = 50 #ICASN = 0 #ITUNE = 100 #VCASC = 150 # W02R09 NFE #ITHR = 50 #VRESET = #VCASP = #IBIAS = 80 ICASN = 4 ITUNE = 0 #VCASC = 164 #overriding values in "scan_configuration" #when none given default ones are being used START_ROW = 0 STOP_ROW = 512 START_COLUMN = 100 STOP_COLUMN = 224 WAIT_FOR_FPGA = 1 CONFIG_ID = 46 ELOG_CATEGORY = Debug # Debug, Beam, VoltageScan, Scan COMMENT_IN_CONF = "PWELL = 5V PSUB = 6V, neutron-irradiated chip, non-local-tuned settings for Vienna chip, NF, unknown thr, 0 deg" ELOG_OUTPUT_PATH = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs" [Producer.hameg] HV = 3 BIAS = 6 SERIAL_PORT = /dev/ttyUSB0 [Monitor.monopix2_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [DataCollector.dc_mpx2] # connection to the monitor EUDAQ_MN = monopix2_mon EUDAQ_FW = native #path to store .raw file to, $3R is replaced by 3 digit run number, $12D -> 12 character date, $X -> .raw EUDAQ_FW_PATTERN = /media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_monopix2$X #fraction of events being sent to the monitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters #disable output of event to bash, is spamming terminal otherwise DISABLE_PRINT = 1 [Producer.tpx3] threshold = 1185 XMLConfig = /home/silicon/mpw3/spidr3_eudaq_operation/config_W2_E5_test_masked.t3x external_clock = 1 EUDAQ_DC = spidr_dc [DataCollector.spidr_dc] EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/backup/desy_jul23/run$6R_tpx3$X DISABLE_PRINT = 1
498	Sun Jul 16 10:48:39 2023	tb-crew	cooled unirradiated	1338	RD50-MPW3	unknown	90	unirradiated	1.9K	4.2	Low Flux Low	electron	Good	16.07.2023 10:43:21	16.07.2023 10:43:53	0
automatic log for run 1338 Comment: only 3 top rows, cooled, thr = 1.00V, another noisy pixel
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW3] this_config_file = config_piggy_new.cfg #SEC::MISC accept_tlu_trigger = 0 enable_readout = 1 calib_file_base = calib_base.txt config_si5345 = clock_config.txt execute_file = execute.txt i2c_addr_base = 0x41 i2c_dev = /dev/i2c-9 matrix_config = matrix_config_base.txt dcol_hb = 5 disable_clk = 0 #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 0 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1.0 th__i = 3 [RD50_MPW3_Piggy] this_config_file = config_piggy_new.cfg #SEC::MISC calib_file = calib_piggy.txt execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 matrix_config = matrix_config_piggy.txt piggy_attached = 0 #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36
Attachment 2: matrix_config_base.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {mask} {en_inj} {hb_en} {en_sfout} {TDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 1 0 0 0 -1 00 01 1 0 0 0 -1 00 02 1 0 0 0 -1 00 03 1 0 0 0 -1 00 04 1 0 0 0 -1 00 05 1 0 0 0 -1 00 06 1 0 0 0 -1 00 07 1 0 0 0 -1 00 08 1 0 0 0 -1 00 09 1 0 0 0 -1 00 10 1 0 0 0 -1 00 11 1 0 0 0 -1 00 12 1 0 0 0 -1 00 13 1 0 0 0 -1 00 14 1 0 0 0 -1 00 15 1 0 0 0 -1 00 16 1 0 0 0 -1 00 17 1 0 0 0 -1 00 18 1 0 0 0 -1 00 19 1 0 0 0 -1 00 20 1 0 0 0 -1 00 21 1 0 0 0 -1 00 22 1 0 0 0 -1 00 23 1 0 0 0 -1 00 24 1 0 0 0 -1 00 25 1 0 0 0 -1 00 26 1 0 0 0 -1 00 27 1 0 0 0 -1 00 28 1 0 0 0 -1 00 29 1 0 0 0 -1 00 30 1 0 0 0 -1 00 31 1 0 0 0 -1 00 32 1 0 0 0 -1 00 33 1 0 0 0 -1 00 34 1 0 0 0 -1 00 35 1 0 0 0 -1 00 36 1 0 0 0 -1 00 37 1 0 0 0 -1 00 38 1 0 0 0 -1 00 39 1 0 0 0 -1 00 40 1 0 0 0 -1 00 41 1 0 0 0 -1 00 42 1 0 0 0 -1 00 43 1 0 0 0 -1 00 44 1 0 0 0 -1 00 45 1 0 0 0 -1 00 46 1 0 0 0 -1 00 47 1 0 0 0 -1 00 48 1 0 0 0 -1 00 49 1 0 0 0 -1 00 50 1 0 0 0 -1 00 51 1 0 0 0 -1 00 52 1 0 0 0 -1 00 53 1 0 0 0 -1 00 54 1 0 0 0 -1 00 55 1 0 0 0 -1 00 56 1 0 0 0 -1 00 57 1 0 0 0 -1 00 58 1 0 0 0 -1 00 59 1 0 0 0 -1 00 60 1 0 0 0 -1 00 61 1 0 0 0 -1 00 62 1 0 0 0 -1 00 63 1 0 0 0 -1 01 00 1 0 0 0 -1 01 01 1 0 0 0 -1 01 02 1 0 0 0 -1 01 03 1 0 0 0 -1 01 04 1 0 0 0 -1 01 05 1 0 0 0 -1 01 06 1 0 0 0 -1 01 07 1 0 0 0 -1 01 08 1 0 0 0 -1 01 09 1 0 0 0 -1 01 10 1 0 0 0 -1 01 11 1 0 0 0 -1 01 12 1 0 0 0 -1 01 13 1 0 0 0 -1 01 14 1 0 0 0 -1 01 15 1 0 0 0 -1 01 16 1 0 0 0 -1 01 17 1 0 0 0 -1 01 18 1 0 0 0 -1 01 19 1 0 0 0 -1 01 20 1 0 0 0 -1 01 21 1 0 0 0 -1 01 22 1 0 0 0 -1 01 23 1 0 0 0 -1 01 24 1 0 0 0 -1 01 25 1 0 0 0 -1 01 26 1 0 0 0 -1 01 27 1 0 0 0 -1 01 28 1 0 0 0 -1 01 29 1 0 0 0 -1 01 30 1 0 0 0 -1 01 31 1 0 0 0 -1 01 32 1 0 0 0 -1 01 33 1 0 0 0 -1 01 34 1 0 0 0 -1 01 35 1 0 0 0 -1 01 36 1 0 0 0 -1 01 37 1 0 0 0 -1 01 38 1 0 0 0 -1 01 39 1 0 0 0 -1 01 40 1 0 0 0 -1 01 41 1 0 0 0 -1 01 42 1 0 0 0 -1 01 43 1 0 0 0 -1 01 44 1 0 0 0 -1 01 45 1 0 0 0 -1 01 46 1 0 0 0 -1 01 47 1 0 0 0 -1 01 48 1 0 0 0 -1 01 49 1 0 0 0 -1 01 50 1 0 0 0 -1 01 51 1 0 0 0 -1 01 52 1 0 0 0 -1 01 53 1 0 0 0 -1 01 54 1 0 0 0 -1 01 55 1 0 0 0 -1 01 56 1 0 0 0 -1 01 57 1 0 0 0 -1 01 58 1 0 0 0 -1 01 59 1 0 0 0 -1 01 60 1 0 0 0 -1 01 61 1 0 0 0 -1 01 62 1 0 0 0 -1 01 63 1 0 0 0 -1 02 00 1 0 0 0 -1 02 01 1 0 0 0 -1 02 02 1 0 0 0 -1 02 03 1 0 0 0 -1 02 04 1 0 0 0 -1 02 05 1 0 0 0 -1 02 06 1 0 0 0 -1 02 07 1 0 0 0 -1 02 08 1 0 0 0 -1 02 09 1 0 0 0 -1 02 10 1 0 0 0 -1 02 11 1 0 0 0 -1 02 12 1 0 0 0 -1 02 13 1 0 0 0 -1 02 14 1 0 0 0 -1 02 15 1 0 0 0 -1 02 16 1 0 0 0 -1 02 17 1 0 0 0 -1 02 18 1 0 0 0 -1 02 19 1 0 0 0 -1 02 20 1 0 0 0 -1 02 21 1 0 0 0 -1 02 22 1 0 0 0 -1 02 23 1 0 0 0 -1 02 24 1 0 0 0 -1 02 25 1 0 0 0 -1 02 26 1 0 0 0 -1 02 27 1 0 0 0 -1 02 28 1 0 0 0 -1 02 29 1 0 0 0 -1 02 30 1 0 0 0 -1 02 31 1 0 0 0 -1 02 32 1 0 0 0 -1 02 33 1 0 0 0 -1 02 34 1 0 0 0 -1 02 35 1 0 0 0 -1 02 36 1 0 0 0 -1 02 37 1 0 0 0 -1 02 38 1 0 0 0 -1 02 39 1 0 0 0 -1 02 40 1 0 0 0 -1 02 41 1 0 0 0 -1 02 42 1 0 0 0 -1 02 43 1 0 0 0 -1 02 44 1 0 0 0 -1 02 45 1 0 0 0 -1 02 46 1 0 0 0 -1 02 47 1 0 0 0 -1 02 48 1 0 0 0 -1 02 49 1 0 0 0 -1 02 50 1 0 0 0 -1 02 51 1 0 0 0 -1 02 52 1 0 0 0 -1 02 53 1 0 0 0 -1 02 54 1 0 0 0 -1 02 55 1 0 0 0 -1 02 56 1 0 0 0 -1 02 57 1 0 0 0 -1 02 58 1 0 0 0 -1 02 59 1 0 0 0 -1 02 60 1 0 0 0 -1 02 61 1 0 0 0 -1 02 62 1 0 0 0 -1 02 63 1 0 0 0 -1 03 00 1 0 0 0 -1 03 01 1 0 0 0 -1 03 02 1 0 0 0 -1 03 03 1 0 0 0 -1 03 04 1 0 0 0 -1 03 05 1 0 0 0 -1 03 06 1 0 0 0 -1 03 07 1 0 0 0 -1 03 08 1 0 0 0 -1 03 09 1 0 0 0 -1 03 10 1 0 0 0 -1 03 11 1 0 0 0 -1 03 12 1 0 0 0 -1 03 13 1 0 0 0 -1 03 14 1 0 0 0 -1 03 15 1 0 0 0 -1 03 16 1 0 0 0 -1 03 17 1 0 0 0 -1 03 18 1 0 0 0 -1 03 19 1 0 0 0 -1 03 20 1 0 0 0 -1 03 21 1 0 0 0 -1 03 22 1 0 0 0 -1 03 23 1 0 0 0 -1 03 24 1 0 0 0 -1 03 25 1 0 0 0 -1 03 26 1 0 0 0 -1 03 27 1 0 0 0 -1 03 28 1 0 0 0 -1 03 29 1 0 0 0 -1 03 30 1 0 0 0 -1 03 31 1 0 0 0 -1 03 32 1 0 0 0 -1 03 33 1 0 0 0 -1 03 34 1 0 0 0 -1 03 35 1 0 0 0 -1 03 36 1 0 0 0 -1 03 37 1 0 0 0 -1 03 38 1 0 0 0 -1 03 39 1 0 0 0 -1 03 40 1 0 0 0 -1 03 41 1 0 0 0 -1 03 42 1 0 0 0 -1 03 43 1 0 0 0 -1 03 44 1 0 0 0 -1 03 45 1 0 0 0 -1 03 46 1 0 0 0 -1 03 47 1 0 0 0 -1 03 48 1 0 0 0 -1 03 49 1 0 0 0 -1 03 50 1 0 0 0 -1 03 51 1 0 0 0 -1 03 52 1 0 0 0 -1 03 53 1 0 0 0 -1 03 54 1 0 0 0 -1 03 55 1 0 0 0 -1 03 56 1 0 0 0 -1 03 57 1 0 0 0 -1 03 58 1 0 0 0 -1 03 59 1 0 0 0 -1 03 60 1 0 0 0 -1 03 61 1 0 0 0 -1 03 62 1 0 0 0 -1 03 63 1 0 0 0 -1 04 00 1 0 0 0 -1 04 01 1 0 0 0 -1 04 02 1 0 0 0 -1 04 03 1 0 0 0 -1 04 04 1 0 0 0 -1 04 05 1 0 0 0 -1 04 06 1 0 0 0 -1 04 07 1 0 0 0 -1 04 08 1 0 0 0 -1 04 09 1 0 0 0 -1 04 10 1 0 0 0 -1 04 11 1 0 0 0 -1 04 12 1 0 0 0 -1 04 13 1 0 0 0 -1 04 14 1 0 0 0 -1 04 15 1 0 0 0 -1 04 16 1 0 0 0 -1 04 17 1 0 0 0 -1 04 18 1 0 0 0 -1 04 19 1 0 0 0 -1 04 20 1 0 0 0 -1 04 21 1 0 0 0 -1 04 22 1 0 0 0 -1 04 23 1 0 0 0 -1 04 24 1 0 0 0 -1 04 25 1 0 0 0 -1 04 26 1 0 0 0 -1 04 27 1 0 0 0 -1 04 28 1 0 0 0 -1 04 29 1 0 0 0 -1 04 30 1 0 0 0 -1 04 31 1 0 0 0 -1 04 32 1 0 0 0 -1 04 33 1 0 0 0 -1 04 34 1 0 0 0 -1 04 35 1 0 0 0 -1 04 36 1 0 0 0 -1 04 37 1 0 0 0 -1 ... 3611 more lines ...
Attachment 3: matrix_config_piggy.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {mask} {en_inj} {hb_en} {en_sfout} {TDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1
Attachment 4: eudaq_config.cfg
[RunControl] EUDAQ_CTRL_PRODUCER_LAST_START = aida_tlu [LogCollector.log] [Producer.aida_tlu] verbose = 0 confid = 20181002 skipconf = 0 # delay start in ms delayStart = 0 #################################################### # DUT IN/OUTPUT # Mask: 0 CONT, 1 SPARE, 2 TRIG, 3 BUSY (1 = driven by TLU, 0 = driven by DUT) # EUDET mode: 7 HDMI1_set = 0x7 HDMI2_set = 0x7 HDMI3_set = 0x7 HDMI4_set = 0x7 # same as above for the clock line, 1 = AIDA mode, 2 = FPGA HDMI1_clk = 1 HDMI2_clk = 0 HDMI3_clk = 1 HDMI4_clk = 1 LEMOclk = 1 # if input, then also adjust clk.txt # Activate channels # Only TLU #DUTMask = 0x0 # Telescope at HDMI1 #DUTMask = 0x1 # Only FEI4 at HDMI2 #DUTMask = 0x2 # Telescope at HDMI1, FEI4 at HDMI2 #DUTMask = 0x3 #Adenium at HDMI3 #DUTMask = 0x1 #Adenium at HDMI1, MPW3 at HDMI3, Monopix2 at HDMI4 DUTMask = 0xD # Define mode: # Each DUT channel has two bits: HDMI1=0&1 bit; HDMI2= 2&3bit; ... # Only the lowest bit is significant: # AIDA mode for each "1st" LSbit = 1 # EUDET modes incl. DUT clocking out each "1st" LSbit = 0 # e.g. 1st and 2nd channel in EUDET mode: 0xF0 #DUTMaskMode = 0xF0 # 1st and 2nd channel are reading out Trigger ID # e.g. only 1st in EUDET mode #DUTMaskMode = 0xFC # 1st is reading out Trigger ID #!!!!!!!!!!!! Check this !!!!!!!!!!!!!!! #DUTMaskMode = 0x01 #I think this is AIDA mode for channel 3 and reading out trigger number #HDMI3 on AIDA with trigger number #DUTMaskMode = 0x31 #HDMI3+4 on AIDA with trigger number DUTMaskMode = 0xF1 # "Mixed mode" to ignore a busy line from a DUT # TLU ignores the telescope busy (at HDMI1) #DUTIgnoreBusy = 0x1 # yes (default, Mixed mode) DUTIgnoreBusy = 0xA #no (EUDET mode) ################################################### # ONLY AUTOTRIGGER #InternalTriggerFreq = 100 # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 7 # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 7 in1_DEL = 0 in2_STR = 7 in2_DEL = 0 in3_STR = 7 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # DAC INPUT THRESHOLD in V DACThreshold0 = -0.4 # Was -0.04, but we get amplyfied signal from NIM module DACThreshold1 = -0.4 # Was -0.04, but we get amplyfied signal from NIM module DACThreshold2 = -0.20 DACThreshold3 = -0.20 DACThreshold4 = -0.20 DACThreshold5 = -0.20 # PMT Power PMT1_V = 0.80 PMT2_V = 0.80 PMT3_V = 0.80 PMT4_V = 0.80 # 2 words 32bit: Hi + Lo # combinations of coincidence are now possible! # Coincidence of input 0 to 3 (telescope) #trigMaskHi = 0x00000000 #trigMaskLo = 0x00008000 # Coincidence of input 0 and 1 trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 # New: Coincidence of any 3 of 4, 4 combinations plus all 4 #trigMaskHi = 0x00000000 #trigMaskLo = 0x0000C880 # EUDAQ2 # Define the data collector to be used by the producer EUDAQ_DC = dc_tlu [DataCollector.dc_tlu] EUDAQ_ID=100 EUDAQ_MN=StdEventMonitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION=5 EUDAQ_FW = native EUDAQ_FW_PATTERN = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_tlu$X" DISABLE_PRINT = 1 ################################### Adenium ##################################### [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=dc_tel [DataCollector.dc_tel] EUDAQ_ID=100 EUDAQ_MN=StdEventMonitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION=1 EUDAQ_FW = native EUDAQ_FW_PATTERN = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_adenium$X" DISABLE_PRINT = 1 ################################### MPW3 ##################################### [Producer.RD50_MPW3] [DataCollector.mpw3_dc] # connection to the monitor EUDAQ_MN = mpw3_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/backup/desy_jul23/run$6R_mpw3$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 SYNC_MODE = 0 [Monitor.mpw3_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [Producer.elog_mpw3] # command (shell script) to execute before starting a run start_cmd = "./copy_configs.sh" #files to attach to the Elog entry files2log = "tmp/peary_config.cfg, tmp/matrix_config_base.txt, tmp/matrix_config_piggy.txt, tmp/eudaq_config.cfg" ################################################ MPX2 ##################################################### [Producer.monopix2] # connection to the data collector EUDAQ_DC = dc_mpx2 ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 # W08R19 #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/20230630_113951_threshold_scan_interpreted.h5 #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/HV_THR25_HVCasc_THR22_10V/20230708_095321_threshold_scan_interpreted.h5 #MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/masked_pixels.yaml #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/HV_THR25_HVCasc_THR22_10V/intermediate/20230630_132140_threshold_scan_interpreted.h5 #MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W02R09/masked_pixels.yaml CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/20230630_112801_global_threshold_tuning_interpreted.h5 MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W02R09/masked_pixels.yaml CHIP_SN = W02R09 CHIP_CMD_CLK = 160.0 #VCLIP = 255 #IBIAS = 100 # W02R09 HV FE #ITHR = 32 #VRESET = 100 #VCASP = 40 #IBIAS = 50 #ICASN = 0 #ITUNE = 100 #VCASC = 150 # W02R09 NFE #ITHR = 50 #VRESET = #VCASP = #IBIAS = 80 ICASN = 4 ITUNE = 0 #VCASC = 164 #overriding values in "scan_configuration" #when none given default ones are being used START_ROW = 0 STOP_ROW = 512 START_COLUMN = 100 STOP_COLUMN = 224 WAIT_FOR_FPGA = 1 CONFIG_ID = 46 ELOG_CATEGORY = Debug # Debug, Beam, VoltageScan, Scan COMMENT_IN_CONF = "PWELL = 5V PSUB = 6V, neutron-irradiated chip, non-local-tuned settings for Vienna chip, NF, unknown thr, 0 deg" ELOG_OUTPUT_PATH = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs" [Producer.hameg] HV = 3 BIAS = 6 SERIAL_PORT = /dev/ttyUSB0 [Monitor.monopix2_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [DataCollector.dc_mpx2] # connection to the monitor EUDAQ_MN = monopix2_mon EUDAQ_FW = native #path to store .raw file to, $3R is replaced by 3 digit run number, $12D -> 12 character date, $X -> .raw EUDAQ_FW_PATTERN = /media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_monopix2$X #fraction of events being sent to the monitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters #disable output of event to bash, is spamming terminal otherwise DISABLE_PRINT = 1 [Producer.tpx3] threshold = 1185 XMLConfig = /home/silicon/mpw3/spidr3_eudaq_operation/config_W2_E5_test_masked.t3x external_clock = 1 EUDAQ_DC = spidr_dc [DataCollector.spidr_dc] EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/backup/desy_jul23/run$6R_tpx3$X DISABLE_PRINT = 1
500	Sun Jul 16 11:12:45 2023	tb-crew	cooled unirradiated	1340	RD50-MPW3	unknown	90	unirradiated	1.9K	4.2	Low Flux Low	electron	Good	16.07.2023 11:07:45	16.07.2023 11:07:59	0
automatic log for run 1340 Comment: only 3 top rows, cooled, thr = 0.92V
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW3] this_config_file = config_piggy_new.cfg #SEC::MISC accept_tlu_trigger = 0 enable_readout = 1 calib_file_base = calib_base.txt config_si5345 = clock_config.txt execute_file = execute.txt i2c_addr_base = 0x41 i2c_dev = /dev/i2c-9 matrix_config = matrix_config_base.txt dcol_hb = 5 disable_clk = 0 #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 0 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = .92 th__i = 3 [RD50_MPW3_Piggy] this_config_file = config_piggy_new.cfg #SEC::MISC calib_file = calib_piggy.txt execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 matrix_config = matrix_config_piggy.txt piggy_attached = 0 #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36
Attachment 2: matrix_config_base.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {mask} {en_inj} {hb_en} {en_sfout} {TDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 1 0 0 0 -1 00 01 1 0 0 0 -1 00 02 1 0 0 0 -1 00 03 1 0 0 0 -1 00 04 1 0 0 0 -1 00 05 1 0 0 0 -1 00 06 1 0 0 0 -1 00 07 1 0 0 0 -1 00 08 1 0 0 0 -1 00 09 1 0 0 0 -1 00 10 1 0 0 0 -1 00 11 1 0 0 0 -1 00 12 1 0 0 0 -1 00 13 1 0 0 0 -1 00 14 1 0 0 0 -1 00 15 1 0 0 0 -1 00 16 1 0 0 0 -1 00 17 1 0 0 0 -1 00 18 1 0 0 0 -1 00 19 1 0 0 0 -1 00 20 1 0 0 0 -1 00 21 1 0 0 0 -1 00 22 1 0 0 0 -1 00 23 1 0 0 0 -1 00 24 1 0 0 0 -1 00 25 1 0 0 0 -1 00 26 1 0 0 0 -1 00 27 1 0 0 0 -1 00 28 1 0 0 0 -1 00 29 1 0 0 0 -1 00 30 1 0 0 0 -1 00 31 1 0 0 0 -1 00 32 1 0 0 0 -1 00 33 1 0 0 0 -1 00 34 1 0 0 0 -1 00 35 1 0 0 0 -1 00 36 1 0 0 0 -1 00 37 1 0 0 0 -1 00 38 1 0 0 0 -1 00 39 1 0 0 0 -1 00 40 1 0 0 0 -1 00 41 1 0 0 0 -1 00 42 1 0 0 0 -1 00 43 1 0 0 0 -1 00 44 1 0 0 0 -1 00 45 1 0 0 0 -1 00 46 1 0 0 0 -1 00 47 1 0 0 0 -1 00 48 1 0 0 0 -1 00 49 1 0 0 0 -1 00 50 1 0 0 0 -1 00 51 1 0 0 0 -1 00 52 1 0 0 0 -1 00 53 1 0 0 0 -1 00 54 1 0 0 0 -1 00 55 1 0 0 0 -1 00 56 1 0 0 0 -1 00 57 1 0 0 0 -1 00 58 1 0 0 0 -1 00 59 1 0 0 0 -1 00 60 1 0 0 0 -1 00 61 1 0 0 0 -1 00 62 1 0 0 0 -1 00 63 1 0 0 0 -1 01 00 1 0 0 0 -1 01 01 1 0 0 0 -1 01 02 1 0 0 0 -1 01 03 1 0 0 0 -1 01 04 1 0 0 0 -1 01 05 1 0 0 0 -1 01 06 1 0 0 0 -1 01 07 1 0 0 0 -1 01 08 1 0 0 0 -1 01 09 1 0 0 0 -1 01 10 1 0 0 0 -1 01 11 1 0 0 0 -1 01 12 1 0 0 0 -1 01 13 1 0 0 0 -1 01 14 1 0 0 0 -1 01 15 1 0 0 0 -1 01 16 1 0 0 0 -1 01 17 1 0 0 0 -1 01 18 1 0 0 0 -1 01 19 1 0 0 0 -1 01 20 1 0 0 0 -1 01 21 1 0 0 0 -1 01 22 1 0 0 0 -1 01 23 1 0 0 0 -1 01 24 1 0 0 0 -1 01 25 1 0 0 0 -1 01 26 1 0 0 0 -1 01 27 1 0 0 0 -1 01 28 1 0 0 0 -1 01 29 1 0 0 0 -1 01 30 1 0 0 0 -1 01 31 1 0 0 0 -1 01 32 1 0 0 0 -1 01 33 1 0 0 0 -1 01 34 1 0 0 0 -1 01 35 1 0 0 0 -1 01 36 1 0 0 0 -1 01 37 1 0 0 0 -1 01 38 1 0 0 0 -1 01 39 1 0 0 0 -1 01 40 1 0 0 0 -1 01 41 1 0 0 0 -1 01 42 1 0 0 0 -1 01 43 1 0 0 0 -1 01 44 1 0 0 0 -1 01 45 1 0 0 0 -1 01 46 1 0 0 0 -1 01 47 1 0 0 0 -1 01 48 1 0 0 0 -1 01 49 1 0 0 0 -1 01 50 1 0 0 0 -1 01 51 1 0 0 0 -1 01 52 1 0 0 0 -1 01 53 1 0 0 0 -1 01 54 1 0 0 0 -1 01 55 1 0 0 0 -1 01 56 1 0 0 0 -1 01 57 1 0 0 0 -1 01 58 1 0 0 0 -1 01 59 1 0 0 0 -1 01 60 1 0 0 0 -1 01 61 1 0 0 0 -1 01 62 1 0 0 0 -1 01 63 1 0 0 0 -1 02 00 1 0 0 0 -1 02 01 1 0 0 0 -1 02 02 1 0 0 0 -1 02 03 1 0 0 0 -1 02 04 1 0 0 0 -1 02 05 1 0 0 0 -1 02 06 1 0 0 0 -1 02 07 1 0 0 0 -1 02 08 1 0 0 0 -1 02 09 1 0 0 0 -1 02 10 1 0 0 0 -1 02 11 1 0 0 0 -1 02 12 1 0 0 0 -1 02 13 1 0 0 0 -1 02 14 1 0 0 0 -1 02 15 1 0 0 0 -1 02 16 1 0 0 0 -1 02 17 1 0 0 0 -1 02 18 1 0 0 0 -1 02 19 1 0 0 0 -1 02 20 1 0 0 0 -1 02 21 1 0 0 0 -1 02 22 1 0 0 0 -1 02 23 1 0 0 0 -1 02 24 1 0 0 0 -1 02 25 1 0 0 0 -1 02 26 1 0 0 0 -1 02 27 1 0 0 0 -1 02 28 1 0 0 0 -1 02 29 1 0 0 0 -1 02 30 1 0 0 0 -1 02 31 1 0 0 0 -1 02 32 1 0 0 0 -1 02 33 1 0 0 0 -1 02 34 1 0 0 0 -1 02 35 1 0 0 0 -1 02 36 1 0 0 0 -1 02 37 1 0 0 0 -1 02 38 1 0 0 0 -1 02 39 1 0 0 0 -1 02 40 1 0 0 0 -1 02 41 1 0 0 0 -1 02 42 1 0 0 0 -1 02 43 1 0 0 0 -1 02 44 1 0 0 0 -1 02 45 1 0 0 0 -1 02 46 1 0 0 0 -1 02 47 1 0 0 0 -1 02 48 1 0 0 0 -1 02 49 1 0 0 0 -1 02 50 1 0 0 0 -1 02 51 1 0 0 0 -1 02 52 1 0 0 0 -1 02 53 1 0 0 0 -1 02 54 1 0 0 0 -1 02 55 1 0 0 0 -1 02 56 1 0 0 0 -1 02 57 1 0 0 0 -1 02 58 1 0 0 0 -1 02 59 1 0 0 0 -1 02 60 1 0 0 0 -1 02 61 1 0 0 0 -1 02 62 1 0 0 0 -1 02 63 1 0 0 0 -1 03 00 1 0 0 0 -1 03 01 1 0 0 0 -1 03 02 1 0 0 0 -1 03 03 1 0 0 0 -1 03 04 1 0 0 0 -1 03 05 1 0 0 0 -1 03 06 1 0 0 0 -1 03 07 1 0 0 0 -1 03 08 1 0 0 0 -1 03 09 1 0 0 0 -1 03 10 1 0 0 0 -1 03 11 1 0 0 0 -1 03 12 1 0 0 0 -1 03 13 1 0 0 0 -1 03 14 1 0 0 0 -1 03 15 1 0 0 0 -1 03 16 1 0 0 0 -1 03 17 1 0 0 0 -1 03 18 1 0 0 0 -1 03 19 1 0 0 0 -1 03 20 1 0 0 0 -1 03 21 1 0 0 0 -1 03 22 1 0 0 0 -1 03 23 1 0 0 0 -1 03 24 1 0 0 0 -1 03 25 1 0 0 0 -1 03 26 1 0 0 0 -1 03 27 1 0 0 0 -1 03 28 1 0 0 0 -1 03 29 1 0 0 0 -1 03 30 1 0 0 0 -1 03 31 1 0 0 0 -1 03 32 1 0 0 0 -1 03 33 1 0 0 0 -1 03 34 1 0 0 0 -1 03 35 1 0 0 0 -1 03 36 1 0 0 0 -1 03 37 1 0 0 0 -1 03 38 1 0 0 0 -1 03 39 1 0 0 0 -1 03 40 1 0 0 0 -1 03 41 1 0 0 0 -1 03 42 1 0 0 0 -1 03 43 1 0 0 0 -1 03 44 1 0 0 0 -1 03 45 1 0 0 0 -1 03 46 1 0 0 0 -1 03 47 1 0 0 0 -1 03 48 1 0 0 0 -1 03 49 1 0 0 0 -1 03 50 1 0 0 0 -1 03 51 1 0 0 0 -1 03 52 1 0 0 0 -1 03 53 1 0 0 0 -1 03 54 1 0 0 0 -1 03 55 1 0 0 0 -1 03 56 1 0 0 0 -1 03 57 1 0 0 0 -1 03 58 1 0 0 0 -1 03 59 1 0 0 0 -1 03 60 1 0 0 0 -1 03 61 1 0 0 0 -1 03 62 1 0 0 0 -1 03 63 1 0 0 0 -1 04 00 1 0 0 0 -1 04 01 1 0 0 0 -1 04 02 1 0 0 0 -1 04 03 1 0 0 0 -1 04 04 1 0 0 0 -1 04 05 1 0 0 0 -1 04 06 1 0 0 0 -1 04 07 1 0 0 0 -1 04 08 1 0 0 0 -1 04 09 1 0 0 0 -1 04 10 1 0 0 0 -1 04 11 1 0 0 0 -1 04 12 1 0 0 0 -1 04 13 1 0 0 0 -1 04 14 1 0 0 0 -1 04 15 1 0 0 0 -1 04 16 1 0 0 0 -1 04 17 1 0 0 0 -1 04 18 1 0 0 0 -1 04 19 1 0 0 0 -1 04 20 1 0 0 0 -1 04 21 1 0 0 0 -1 04 22 1 0 0 0 -1 04 23 1 0 0 0 -1 04 24 1 0 0 0 -1 04 25 1 0 0 0 -1 04 26 1 0 0 0 -1 04 27 1 0 0 0 -1 04 28 1 0 0 0 -1 04 29 1 0 0 0 -1 04 30 1 0 0 0 -1 04 31 1 0 0 0 -1 04 32 1 0 0 0 -1 04 33 1 0 0 0 -1 04 34 1 0 0 0 -1 04 35 1 0 0 0 -1 04 36 1 0 0 0 -1 04 37 1 0 0 0 -1 ... 3612 more lines ...
Attachment 3: matrix_config_piggy.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {mask} {en_inj} {hb_en} {en_sfout} {TDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1
Attachment 4: eudaq_config.cfg
[RunControl] EUDAQ_CTRL_PRODUCER_LAST_START = aida_tlu [LogCollector.log] [Producer.aida_tlu] verbose = 0 confid = 20181002 skipconf = 0 # delay start in ms delayStart = 0 #################################################### # DUT IN/OUTPUT # Mask: 0 CONT, 1 SPARE, 2 TRIG, 3 BUSY (1 = driven by TLU, 0 = driven by DUT) # EUDET mode: 7 HDMI1_set = 0x7 HDMI2_set = 0x7 HDMI3_set = 0x7 HDMI4_set = 0x7 # same as above for the clock line, 1 = AIDA mode, 2 = FPGA HDMI1_clk = 1 HDMI2_clk = 0 HDMI3_clk = 1 HDMI4_clk = 1 LEMOclk = 1 # if input, then also adjust clk.txt # Activate channels # Only TLU #DUTMask = 0x0 # Telescope at HDMI1 #DUTMask = 0x1 # Only FEI4 at HDMI2 #DUTMask = 0x2 # Telescope at HDMI1, FEI4 at HDMI2 #DUTMask = 0x3 #Adenium at HDMI3 #DUTMask = 0x1 #Adenium at HDMI1, MPW3 at HDMI3, Monopix2 at HDMI4 DUTMask = 0xD # Define mode: # Each DUT channel has two bits: HDMI1=0&1 bit; HDMI2= 2&3bit; ... # Only the lowest bit is significant: # AIDA mode for each "1st" LSbit = 1 # EUDET modes incl. DUT clocking out each "1st" LSbit = 0 # e.g. 1st and 2nd channel in EUDET mode: 0xF0 #DUTMaskMode = 0xF0 # 1st and 2nd channel are reading out Trigger ID # e.g. only 1st in EUDET mode #DUTMaskMode = 0xFC # 1st is reading out Trigger ID #!!!!!!!!!!!! Check this !!!!!!!!!!!!!!! #DUTMaskMode = 0x01 #I think this is AIDA mode for channel 3 and reading out trigger number #HDMI3 on AIDA with trigger number #DUTMaskMode = 0x31 #HDMI3+4 on AIDA with trigger number DUTMaskMode = 0xF1 # "Mixed mode" to ignore a busy line from a DUT # TLU ignores the telescope busy (at HDMI1) #DUTIgnoreBusy = 0x1 # yes (default, Mixed mode) DUTIgnoreBusy = 0xA #no (EUDET mode) ################################################### # ONLY AUTOTRIGGER #InternalTriggerFreq = 100 # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 7 # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 7 in1_DEL = 0 in2_STR = 7 in2_DEL = 0 in3_STR = 7 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # DAC INPUT THRESHOLD in V DACThreshold0 = -0.4 # Was -0.04, but we get amplyfied signal from NIM module DACThreshold1 = -0.4 # Was -0.04, but we get amplyfied signal from NIM module DACThreshold2 = -0.20 DACThreshold3 = -0.20 DACThreshold4 = -0.20 DACThreshold5 = -0.20 # PMT Power PMT1_V = 0.80 PMT2_V = 0.80 PMT3_V = 0.80 PMT4_V = 0.80 # 2 words 32bit: Hi + Lo # combinations of coincidence are now possible! # Coincidence of input 0 to 3 (telescope) #trigMaskHi = 0x00000000 #trigMaskLo = 0x00008000 # Coincidence of input 0 and 1 trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 # New: Coincidence of any 3 of 4, 4 combinations plus all 4 #trigMaskHi = 0x00000000 #trigMaskLo = 0x0000C880 # EUDAQ2 # Define the data collector to be used by the producer EUDAQ_DC = dc_tlu [DataCollector.dc_tlu] EUDAQ_ID=100 EUDAQ_MN=StdEventMonitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION=5 EUDAQ_FW = native EUDAQ_FW_PATTERN = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_tlu$X" DISABLE_PRINT = 1 ################################### Adenium ##################################### [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=dc_tel [DataCollector.dc_tel] EUDAQ_ID=100 EUDAQ_MN=StdEventMonitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION=1 EUDAQ_FW = native EUDAQ_FW_PATTERN = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_adenium$X" DISABLE_PRINT = 1 ################################### MPW3 ##################################### [Producer.RD50_MPW3] [DataCollector.mpw3_dc] # connection to the monitor EUDAQ_MN = mpw3_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/backup/desy_jul23/run$6R_mpw3$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 SYNC_MODE = 0 [Monitor.mpw3_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [Producer.elog_mpw3] # command (shell script) to execute before starting a run start_cmd = "./copy_configs.sh" #files to attach to the Elog entry files2log = "tmp/peary_config.cfg, tmp/matrix_config_base.txt, tmp/matrix_config_piggy.txt, tmp/eudaq_config.cfg" ################################################ MPX2 ##################################################### [Producer.monopix2] # connection to the data collector EUDAQ_DC = dc_mpx2 ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 # W08R19 #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/20230630_113951_threshold_scan_interpreted.h5 #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/HV_THR25_HVCasc_THR22_10V/20230708_095321_threshold_scan_interpreted.h5 #MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/masked_pixels.yaml #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/HV_THR25_HVCasc_THR22_10V/intermediate/20230630_132140_threshold_scan_interpreted.h5 #MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W02R09/masked_pixels.yaml CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/20230630_112801_global_threshold_tuning_interpreted.h5 MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W02R09/masked_pixels.yaml CHIP_SN = W02R09 CHIP_CMD_CLK = 160.0 #VCLIP = 255 #IBIAS = 100 # W02R09 HV FE #ITHR = 32 #VRESET = 100 #VCASP = 40 #IBIAS = 50 #ICASN = 0 #ITUNE = 100 #VCASC = 150 # W02R09 NFE #ITHR = 50 #VRESET = #VCASP = #IBIAS = 80 ICASN = 4 ITUNE = 0 #VCASC = 164 #overriding values in "scan_configuration" #when none given default ones are being used START_ROW = 0 STOP_ROW = 512 START_COLUMN = 100 STOP_COLUMN = 224 WAIT_FOR_FPGA = 1 CONFIG_ID = 46 ELOG_CATEGORY = Debug # Debug, Beam, VoltageScan, Scan COMMENT_IN_CONF = "PWELL = 5V PSUB = 6V, neutron-irradiated chip, non-local-tuned settings for Vienna chip, NF, unknown thr, 0 deg" ELOG_OUTPUT_PATH = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs" [Producer.hameg] HV = 3 BIAS = 6 SERIAL_PORT = /dev/ttyUSB0 [Monitor.monopix2_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [DataCollector.dc_mpx2] # connection to the monitor EUDAQ_MN = monopix2_mon EUDAQ_FW = native #path to store .raw file to, $3R is replaced by 3 digit run number, $12D -> 12 character date, $X -> .raw EUDAQ_FW_PATTERN = /media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_monopix2$X #fraction of events being sent to the monitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters #disable output of event to bash, is spamming terminal otherwise DISABLE_PRINT = 1 [Producer.tpx3] threshold = 1185 XMLConfig = /home/silicon/mpw3/spidr3_eudaq_operation/config_W2_E5_test_masked.t3x external_clock = 1 EUDAQ_DC = spidr_dc [DataCollector.spidr_dc] EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/backup/desy_jul23/run$6R_tpx3$X DISABLE_PRINT = 1
501	Sun Jul 16 11:14:04 2023	tb-crew	cooled unirradiated	1341	RD50-MPW3	unknown	90	unirradiated	1.9K	4.2	Low Flux Low	electron	Good	16.07.2023 11:08:59	16.07.2023 11:09:18	0
automatic log for run 1341 Comment: only 3 top rows, cooled, thr = 0.98V, noisy
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW3] this_config_file = config_piggy_new.cfg #SEC::MISC accept_tlu_trigger = 0 enable_readout = 1 calib_file_base = calib_base.txt config_si5345 = clock_config.txt execute_file = execute.txt i2c_addr_base = 0x41 i2c_dev = /dev/i2c-9 matrix_config = matrix_config_base.txt dcol_hb = 5 disable_clk = 0 #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 0 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = .98 th__i = 3 [RD50_MPW3_Piggy] this_config_file = config_piggy_new.cfg #SEC::MISC calib_file = calib_piggy.txt execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 matrix_config = matrix_config_piggy.txt piggy_attached = 0 #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36
Attachment 2: matrix_config_base.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {mask} {en_inj} {hb_en} {en_sfout} {TDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 1 0 0 0 -1 00 01 1 0 0 0 -1 00 02 1 0 0 0 -1 00 03 1 0 0 0 -1 00 04 1 0 0 0 -1 00 05 1 0 0 0 -1 00 06 1 0 0 0 -1 00 07 1 0 0 0 -1 00 08 1 0 0 0 -1 00 09 1 0 0 0 -1 00 10 1 0 0 0 -1 00 11 1 0 0 0 -1 00 12 1 0 0 0 -1 00 13 1 0 0 0 -1 00 14 1 0 0 0 -1 00 15 1 0 0 0 -1 00 16 1 0 0 0 -1 00 17 1 0 0 0 -1 00 18 1 0 0 0 -1 00 19 1 0 0 0 -1 00 20 1 0 0 0 -1 00 21 1 0 0 0 -1 00 22 1 0 0 0 -1 00 23 1 0 0 0 -1 00 24 1 0 0 0 -1 00 25 1 0 0 0 -1 00 26 1 0 0 0 -1 00 27 1 0 0 0 -1 00 28 1 0 0 0 -1 00 29 1 0 0 0 -1 00 30 1 0 0 0 -1 00 31 1 0 0 0 -1 00 32 1 0 0 0 -1 00 33 1 0 0 0 -1 00 34 1 0 0 0 -1 00 35 1 0 0 0 -1 00 36 1 0 0 0 -1 00 37 1 0 0 0 -1 00 38 1 0 0 0 -1 00 39 1 0 0 0 -1 00 40 1 0 0 0 -1 00 41 1 0 0 0 -1 00 42 1 0 0 0 -1 00 43 1 0 0 0 -1 00 44 1 0 0 0 -1 00 45 1 0 0 0 -1 00 46 1 0 0 0 -1 00 47 1 0 0 0 -1 00 48 1 0 0 0 -1 00 49 1 0 0 0 -1 00 50 1 0 0 0 -1 00 51 1 0 0 0 -1 00 52 1 0 0 0 -1 00 53 1 0 0 0 -1 00 54 1 0 0 0 -1 00 55 1 0 0 0 -1 00 56 1 0 0 0 -1 00 57 1 0 0 0 -1 00 58 1 0 0 0 -1 00 59 1 0 0 0 -1 00 60 1 0 0 0 -1 00 61 1 0 0 0 -1 00 62 1 0 0 0 -1 00 63 1 0 0 0 -1 01 00 1 0 0 0 -1 01 01 1 0 0 0 -1 01 02 1 0 0 0 -1 01 03 1 0 0 0 -1 01 04 1 0 0 0 -1 01 05 1 0 0 0 -1 01 06 1 0 0 0 -1 01 07 1 0 0 0 -1 01 08 1 0 0 0 -1 01 09 1 0 0 0 -1 01 10 1 0 0 0 -1 01 11 1 0 0 0 -1 01 12 1 0 0 0 -1 01 13 1 0 0 0 -1 01 14 1 0 0 0 -1 01 15 1 0 0 0 -1 01 16 1 0 0 0 -1 01 17 1 0 0 0 -1 01 18 1 0 0 0 -1 01 19 1 0 0 0 -1 01 20 1 0 0 0 -1 01 21 1 0 0 0 -1 01 22 1 0 0 0 -1 01 23 1 0 0 0 -1 01 24 1 0 0 0 -1 01 25 1 0 0 0 -1 01 26 1 0 0 0 -1 01 27 1 0 0 0 -1 01 28 1 0 0 0 -1 01 29 1 0 0 0 -1 01 30 1 0 0 0 -1 01 31 1 0 0 0 -1 01 32 1 0 0 0 -1 01 33 1 0 0 0 -1 01 34 1 0 0 0 -1 01 35 1 0 0 0 -1 01 36 1 0 0 0 -1 01 37 1 0 0 0 -1 01 38 1 0 0 0 -1 01 39 1 0 0 0 -1 01 40 1 0 0 0 -1 01 41 1 0 0 0 -1 01 42 1 0 0 0 -1 01 43 1 0 0 0 -1 01 44 1 0 0 0 -1 01 45 1 0 0 0 -1 01 46 1 0 0 0 -1 01 47 1 0 0 0 -1 01 48 1 0 0 0 -1 01 49 1 0 0 0 -1 01 50 1 0 0 0 -1 01 51 1 0 0 0 -1 01 52 1 0 0 0 -1 01 53 1 0 0 0 -1 01 54 1 0 0 0 -1 01 55 1 0 0 0 -1 01 56 1 0 0 0 -1 01 57 1 0 0 0 -1 01 58 1 0 0 0 -1 01 59 1 0 0 0 -1 01 60 1 0 0 0 -1 01 61 1 0 0 0 -1 01 62 1 0 0 0 -1 01 63 1 0 0 0 -1 02 00 1 0 0 0 -1 02 01 1 0 0 0 -1 02 02 1 0 0 0 -1 02 03 1 0 0 0 -1 02 04 1 0 0 0 -1 02 05 1 0 0 0 -1 02 06 1 0 0 0 -1 02 07 1 0 0 0 -1 02 08 1 0 0 0 -1 02 09 1 0 0 0 -1 02 10 1 0 0 0 -1 02 11 1 0 0 0 -1 02 12 1 0 0 0 -1 02 13 1 0 0 0 -1 02 14 1 0 0 0 -1 02 15 1 0 0 0 -1 02 16 1 0 0 0 -1 02 17 1 0 0 0 -1 02 18 1 0 0 0 -1 02 19 1 0 0 0 -1 02 20 1 0 0 0 -1 02 21 1 0 0 0 -1 02 22 1 0 0 0 -1 02 23 1 0 0 0 -1 02 24 1 0 0 0 -1 02 25 1 0 0 0 -1 02 26 1 0 0 0 -1 02 27 1 0 0 0 -1 02 28 1 0 0 0 -1 02 29 1 0 0 0 -1 02 30 1 0 0 0 -1 02 31 1 0 0 0 -1 02 32 1 0 0 0 -1 02 33 1 0 0 0 -1 02 34 1 0 0 0 -1 02 35 1 0 0 0 -1 02 36 1 0 0 0 -1 02 37 1 0 0 0 -1 02 38 1 0 0 0 -1 02 39 1 0 0 0 -1 02 40 1 0 0 0 -1 02 41 1 0 0 0 -1 02 42 1 0 0 0 -1 02 43 1 0 0 0 -1 02 44 1 0 0 0 -1 02 45 1 0 0 0 -1 02 46 1 0 0 0 -1 02 47 1 0 0 0 -1 02 48 1 0 0 0 -1 02 49 1 0 0 0 -1 02 50 1 0 0 0 -1 02 51 1 0 0 0 -1 02 52 1 0 0 0 -1 02 53 1 0 0 0 -1 02 54 1 0 0 0 -1 02 55 1 0 0 0 -1 02 56 1 0 0 0 -1 02 57 1 0 0 0 -1 02 58 1 0 0 0 -1 02 59 1 0 0 0 -1 02 60 1 0 0 0 -1 02 61 1 0 0 0 -1 02 62 1 0 0 0 -1 02 63 1 0 0 0 -1 03 00 1 0 0 0 -1 03 01 1 0 0 0 -1 03 02 1 0 0 0 -1 03 03 1 0 0 0 -1 03 04 1 0 0 0 -1 03 05 1 0 0 0 -1 03 06 1 0 0 0 -1 03 07 1 0 0 0 -1 03 08 1 0 0 0 -1 03 09 1 0 0 0 -1 03 10 1 0 0 0 -1 03 11 1 0 0 0 -1 03 12 1 0 0 0 -1 03 13 1 0 0 0 -1 03 14 1 0 0 0 -1 03 15 1 0 0 0 -1 03 16 1 0 0 0 -1 03 17 1 0 0 0 -1 03 18 1 0 0 0 -1 03 19 1 0 0 0 -1 03 20 1 0 0 0 -1 03 21 1 0 0 0 -1 03 22 1 0 0 0 -1 03 23 1 0 0 0 -1 03 24 1 0 0 0 -1 03 25 1 0 0 0 -1 03 26 1 0 0 0 -1 03 27 1 0 0 0 -1 03 28 1 0 0 0 -1 03 29 1 0 0 0 -1 03 30 1 0 0 0 -1 03 31 1 0 0 0 -1 03 32 1 0 0 0 -1 03 33 1 0 0 0 -1 03 34 1 0 0 0 -1 03 35 1 0 0 0 -1 03 36 1 0 0 0 -1 03 37 1 0 0 0 -1 03 38 1 0 0 0 -1 03 39 1 0 0 0 -1 03 40 1 0 0 0 -1 03 41 1 0 0 0 -1 03 42 1 0 0 0 -1 03 43 1 0 0 0 -1 03 44 1 0 0 0 -1 03 45 1 0 0 0 -1 03 46 1 0 0 0 -1 03 47 1 0 0 0 -1 03 48 1 0 0 0 -1 03 49 1 0 0 0 -1 03 50 1 0 0 0 -1 03 51 1 0 0 0 -1 03 52 1 0 0 0 -1 03 53 1 0 0 0 -1 03 54 1 0 0 0 -1 03 55 1 0 0 0 -1 03 56 1 0 0 0 -1 03 57 1 0 0 0 -1 03 58 1 0 0 0 -1 03 59 1 0 0 0 -1 03 60 1 0 0 0 -1 03 61 1 0 0 0 -1 03 62 1 0 0 0 -1 03 63 1 0 0 0 -1 04 00 1 0 0 0 -1 04 01 1 0 0 0 -1 04 02 1 0 0 0 -1 04 03 1 0 0 0 -1 04 04 1 0 0 0 -1 04 05 1 0 0 0 -1 04 06 1 0 0 0 -1 04 07 1 0 0 0 -1 04 08 1 0 0 0 -1 04 09 1 0 0 0 -1 04 10 1 0 0 0 -1 04 11 1 0 0 0 -1 04 12 1 0 0 0 -1 04 13 1 0 0 0 -1 04 14 1 0 0 0 -1 04 15 1 0 0 0 -1 04 16 1 0 0 0 -1 04 17 1 0 0 0 -1 04 18 1 0 0 0 -1 04 19 1 0 0 0 -1 04 20 1 0 0 0 -1 04 21 1 0 0 0 -1 04 22 1 0 0 0 -1 04 23 1 0 0 0 -1 04 24 1 0 0 0 -1 04 25 1 0 0 0 -1 04 26 1 0 0 0 -1 04 27 1 0 0 0 -1 04 28 1 0 0 0 -1 04 29 1 0 0 0 -1 04 30 1 0 0 0 -1 04 31 1 0 0 0 -1 04 32 1 0 0 0 -1 04 33 1 0 0 0 -1 04 34 1 0 0 0 -1 04 35 1 0 0 0 -1 04 36 1 0 0 0 -1 04 37 1 0 0 0 -1 ... 3612 more lines ...
Attachment 3: matrix_config_piggy.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {mask} {en_inj} {hb_en} {en_sfout} {TDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1
Attachment 4: eudaq_config.cfg
[RunControl] EUDAQ_CTRL_PRODUCER_LAST_START = aida_tlu [LogCollector.log] [Producer.aida_tlu] verbose = 0 confid = 20181002 skipconf = 0 # delay start in ms delayStart = 0 #################################################### # DUT IN/OUTPUT # Mask: 0 CONT, 1 SPARE, 2 TRIG, 3 BUSY (1 = driven by TLU, 0 = driven by DUT) # EUDET mode: 7 HDMI1_set = 0x7 HDMI2_set = 0x7 HDMI3_set = 0x7 HDMI4_set = 0x7 # same as above for the clock line, 1 = AIDA mode, 2 = FPGA HDMI1_clk = 1 HDMI2_clk = 0 HDMI3_clk = 1 HDMI4_clk = 1 LEMOclk = 1 # if input, then also adjust clk.txt # Activate channels # Only TLU #DUTMask = 0x0 # Telescope at HDMI1 #DUTMask = 0x1 # Only FEI4 at HDMI2 #DUTMask = 0x2 # Telescope at HDMI1, FEI4 at HDMI2 #DUTMask = 0x3 #Adenium at HDMI3 #DUTMask = 0x1 #Adenium at HDMI1, MPW3 at HDMI3, Monopix2 at HDMI4 DUTMask = 0xD # Define mode: # Each DUT channel has two bits: HDMI1=0&1 bit; HDMI2= 2&3bit; ... # Only the lowest bit is significant: # AIDA mode for each "1st" LSbit = 1 # EUDET modes incl. DUT clocking out each "1st" LSbit = 0 # e.g. 1st and 2nd channel in EUDET mode: 0xF0 #DUTMaskMode = 0xF0 # 1st and 2nd channel are reading out Trigger ID # e.g. only 1st in EUDET mode #DUTMaskMode = 0xFC # 1st is reading out Trigger ID #!!!!!!!!!!!! Check this !!!!!!!!!!!!!!! #DUTMaskMode = 0x01 #I think this is AIDA mode for channel 3 and reading out trigger number #HDMI3 on AIDA with trigger number #DUTMaskMode = 0x31 #HDMI3+4 on AIDA with trigger number DUTMaskMode = 0xF1 # "Mixed mode" to ignore a busy line from a DUT # TLU ignores the telescope busy (at HDMI1) #DUTIgnoreBusy = 0x1 # yes (default, Mixed mode) DUTIgnoreBusy = 0xA #no (EUDET mode) ################################################### # ONLY AUTOTRIGGER #InternalTriggerFreq = 100 # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 7 # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 7 in1_DEL = 0 in2_STR = 7 in2_DEL = 0 in3_STR = 7 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # DAC INPUT THRESHOLD in V DACThreshold0 = -0.4 # Was -0.04, but we get amplyfied signal from NIM module DACThreshold1 = -0.4 # Was -0.04, but we get amplyfied signal from NIM module DACThreshold2 = -0.20 DACThreshold3 = -0.20 DACThreshold4 = -0.20 DACThreshold5 = -0.20 # PMT Power PMT1_V = 0.80 PMT2_V = 0.80 PMT3_V = 0.80 PMT4_V = 0.80 # 2 words 32bit: Hi + Lo # combinations of coincidence are now possible! # Coincidence of input 0 to 3 (telescope) #trigMaskHi = 0x00000000 #trigMaskLo = 0x00008000 # Coincidence of input 0 and 1 trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 # New: Coincidence of any 3 of 4, 4 combinations plus all 4 #trigMaskHi = 0x00000000 #trigMaskLo = 0x0000C880 # EUDAQ2 # Define the data collector to be used by the producer EUDAQ_DC = dc_tlu [DataCollector.dc_tlu] EUDAQ_ID=100 EUDAQ_MN=StdEventMonitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION=5 EUDAQ_FW = native EUDAQ_FW_PATTERN = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_tlu$X" DISABLE_PRINT = 1 ################################### Adenium ##################################### [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=dc_tel [DataCollector.dc_tel] EUDAQ_ID=100 EUDAQ_MN=StdEventMonitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION=1 EUDAQ_FW = native EUDAQ_FW_PATTERN = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_adenium$X" DISABLE_PRINT = 1 ################################### MPW3 ##################################### [Producer.RD50_MPW3] [DataCollector.mpw3_dc] # connection to the monitor EUDAQ_MN = mpw3_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/backup/desy_jul23/run$6R_mpw3$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 SYNC_MODE = 0 [Monitor.mpw3_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [Producer.elog_mpw3] # command (shell script) to execute before starting a run start_cmd = "./copy_configs.sh" #files to attach to the Elog entry files2log = "tmp/peary_config.cfg, tmp/matrix_config_base.txt, tmp/matrix_config_piggy.txt, tmp/eudaq_config.cfg" ################################################ MPX2 ##################################################### [Producer.monopix2] # connection to the data collector EUDAQ_DC = dc_mpx2 ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 # W08R19 #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/20230630_113951_threshold_scan_interpreted.h5 #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/HV_THR25_HVCasc_THR22_10V/20230708_095321_threshold_scan_interpreted.h5 #MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/masked_pixels.yaml #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/HV_THR25_HVCasc_THR22_10V/intermediate/20230630_132140_threshold_scan_interpreted.h5 #MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W02R09/masked_pixels.yaml CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/20230630_112801_global_threshold_tuning_interpreted.h5 MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W02R09/masked_pixels.yaml CHIP_SN = W02R09 CHIP_CMD_CLK = 160.0 #VCLIP = 255 #IBIAS = 100 # W02R09 HV FE #ITHR = 32 #VRESET = 100 #VCASP = 40 #IBIAS = 50 #ICASN = 0 #ITUNE = 100 #VCASC = 150 # W02R09 NFE #ITHR = 50 #VRESET = #VCASP = #IBIAS = 80 ICASN = 4 ITUNE = 0 #VCASC = 164 #overriding values in "scan_configuration" #when none given default ones are being used START_ROW = 0 STOP_ROW = 512 START_COLUMN = 100 STOP_COLUMN = 224 WAIT_FOR_FPGA = 1 CONFIG_ID = 46 ELOG_CATEGORY = Debug # Debug, Beam, VoltageScan, Scan COMMENT_IN_CONF = "PWELL = 5V PSUB = 6V, neutron-irradiated chip, non-local-tuned settings for Vienna chip, NF, unknown thr, 0 deg" ELOG_OUTPUT_PATH = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs" [Producer.hameg] HV = 3 BIAS = 6 SERIAL_PORT = /dev/ttyUSB0 [Monitor.monopix2_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [DataCollector.dc_mpx2] # connection to the monitor EUDAQ_MN = monopix2_mon EUDAQ_FW = native #path to store .raw file to, $3R is replaced by 3 digit run number, $12D -> 12 character date, $X -> .raw EUDAQ_FW_PATTERN = /media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_monopix2$X #fraction of events being sent to the monitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters #disable output of event to bash, is spamming terminal otherwise DISABLE_PRINT = 1 [Producer.tpx3] threshold = 1185 XMLConfig = /home/silicon/mpw3/spidr3_eudaq_operation/config_W2_E5_test_masked.t3x external_clock = 1 EUDAQ_DC = spidr_dc [DataCollector.spidr_dc] EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/backup/desy_jul23/run$6R_tpx3$X DISABLE_PRINT = 1
502	Sun Jul 16 11:17:09 2023	tb-crew	cooled unirradiated	1342	RD50-MPW3	unknown	90	unirradiated	1.9K	4.2	Low Flux Low	electron	Good	16.07.2023 11:12:07	16.07.2023 11:12:23	0
automatic log for run 1342 Comment: only 3 top rows, cooled, thr = 0.98V, noisy pixel masked
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW3] this_config_file = config_piggy_new.cfg #SEC::MISC accept_tlu_trigger = 0 enable_readout = 1 calib_file_base = calib_base.txt config_si5345 = clock_config.txt execute_file = execute.txt i2c_addr_base = 0x41 i2c_dev = /dev/i2c-9 matrix_config = matrix_config_base.txt dcol_hb = 5 disable_clk = 0 #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 0 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = .98 th__i = 3 [RD50_MPW3_Piggy] this_config_file = config_piggy_new.cfg #SEC::MISC calib_file = calib_piggy.txt execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 matrix_config = matrix_config_piggy.txt piggy_attached = 0 #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36
Attachment 2: matrix_config_base.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {mask} {en_inj} {hb_en} {en_sfout} {TDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 1 0 0 0 -1 00 01 1 0 0 0 -1 00 02 1 0 0 0 -1 00 03 1 0 0 0 -1 00 04 1 0 0 0 -1 00 05 1 0 0 0 -1 00 06 1 0 0 0 -1 00 07 1 0 0 0 -1 00 08 1 0 0 0 -1 00 09 1 0 0 0 -1 00 10 1 0 0 0 -1 00 11 1 0 0 0 -1 00 12 1 0 0 0 -1 00 13 1 0 0 0 -1 00 14 1 0 0 0 -1 00 15 1 0 0 0 -1 00 16 1 0 0 0 -1 00 17 1 0 0 0 -1 00 18 1 0 0 0 -1 00 19 1 0 0 0 -1 00 20 1 0 0 0 -1 00 21 1 0 0 0 -1 00 22 1 0 0 0 -1 00 23 1 0 0 0 -1 00 24 1 0 0 0 -1 00 25 1 0 0 0 -1 00 26 1 0 0 0 -1 00 27 1 0 0 0 -1 00 28 1 0 0 0 -1 00 29 1 0 0 0 -1 00 30 1 0 0 0 -1 00 31 1 0 0 0 -1 00 32 1 0 0 0 -1 00 33 1 0 0 0 -1 00 34 1 0 0 0 -1 00 35 1 0 0 0 -1 00 36 1 0 0 0 -1 00 37 1 0 0 0 -1 00 38 1 0 0 0 -1 00 39 1 0 0 0 -1 00 40 1 0 0 0 -1 00 41 1 0 0 0 -1 00 42 1 0 0 0 -1 00 43 1 0 0 0 -1 00 44 1 0 0 0 -1 00 45 1 0 0 0 -1 00 46 1 0 0 0 -1 00 47 1 0 0 0 -1 00 48 1 0 0 0 -1 00 49 1 0 0 0 -1 00 50 1 0 0 0 -1 00 51 1 0 0 0 -1 00 52 1 0 0 0 -1 00 53 1 0 0 0 -1 00 54 1 0 0 0 -1 00 55 1 0 0 0 -1 00 56 1 0 0 0 -1 00 57 1 0 0 0 -1 00 58 1 0 0 0 -1 00 59 1 0 0 0 -1 00 60 1 0 0 0 -1 00 61 1 0 0 0 -1 00 62 1 0 0 0 -1 00 63 1 0 0 0 -1 01 00 1 0 0 0 -1 01 01 1 0 0 0 -1 01 02 1 0 0 0 -1 01 03 1 0 0 0 -1 01 04 1 0 0 0 -1 01 05 1 0 0 0 -1 01 06 1 0 0 0 -1 01 07 1 0 0 0 -1 01 08 1 0 0 0 -1 01 09 1 0 0 0 -1 01 10 1 0 0 0 -1 01 11 1 0 0 0 -1 01 12 1 0 0 0 -1 01 13 1 0 0 0 -1 01 14 1 0 0 0 -1 01 15 1 0 0 0 -1 01 16 1 0 0 0 -1 01 17 1 0 0 0 -1 01 18 1 0 0 0 -1 01 19 1 0 0 0 -1 01 20 1 0 0 0 -1 01 21 1 0 0 0 -1 01 22 1 0 0 0 -1 01 23 1 0 0 0 -1 01 24 1 0 0 0 -1 01 25 1 0 0 0 -1 01 26 1 0 0 0 -1 01 27 1 0 0 0 -1 01 28 1 0 0 0 -1 01 29 1 0 0 0 -1 01 30 1 0 0 0 -1 01 31 1 0 0 0 -1 01 32 1 0 0 0 -1 01 33 1 0 0 0 -1 01 34 1 0 0 0 -1 01 35 1 0 0 0 -1 01 36 1 0 0 0 -1 01 37 1 0 0 0 -1 01 38 1 0 0 0 -1 01 39 1 0 0 0 -1 01 40 1 0 0 0 -1 01 41 1 0 0 0 -1 01 42 1 0 0 0 -1 01 43 1 0 0 0 -1 01 44 1 0 0 0 -1 01 45 1 0 0 0 -1 01 46 1 0 0 0 -1 01 47 1 0 0 0 -1 01 48 1 0 0 0 -1 01 49 1 0 0 0 -1 01 50 1 0 0 0 -1 01 51 1 0 0 0 -1 01 52 1 0 0 0 -1 01 53 1 0 0 0 -1 01 54 1 0 0 0 -1 01 55 1 0 0 0 -1 01 56 1 0 0 0 -1 01 57 1 0 0 0 -1 01 58 1 0 0 0 -1 01 59 1 0 0 0 -1 01 60 1 0 0 0 -1 01 61 1 0 0 0 -1 01 62 1 0 0 0 -1 01 63 1 0 0 0 -1 02 00 1 0 0 0 -1 02 01 1 0 0 0 -1 02 02 1 0 0 0 -1 02 03 1 0 0 0 -1 02 04 1 0 0 0 -1 02 05 1 0 0 0 -1 02 06 1 0 0 0 -1 02 07 1 0 0 0 -1 02 08 1 0 0 0 -1 02 09 1 0 0 0 -1 02 10 1 0 0 0 -1 02 11 1 0 0 0 -1 02 12 1 0 0 0 -1 02 13 1 0 0 0 -1 02 14 1 0 0 0 -1 02 15 1 0 0 0 -1 02 16 1 0 0 0 -1 02 17 1 0 0 0 -1 02 18 1 0 0 0 -1 02 19 1 0 0 0 -1 02 20 1 0 0 0 -1 02 21 1 0 0 0 -1 02 22 1 0 0 0 -1 02 23 1 0 0 0 -1 02 24 1 0 0 0 -1 02 25 1 0 0 0 -1 02 26 1 0 0 0 -1 02 27 1 0 0 0 -1 02 28 1 0 0 0 -1 02 29 1 0 0 0 -1 02 30 1 0 0 0 -1 02 31 1 0 0 0 -1 02 32 1 0 0 0 -1 02 33 1 0 0 0 -1 02 34 1 0 0 0 -1 02 35 1 0 0 0 -1 02 36 1 0 0 0 -1 02 37 1 0 0 0 -1 02 38 1 0 0 0 -1 02 39 1 0 0 0 -1 02 40 1 0 0 0 -1 02 41 1 0 0 0 -1 02 42 1 0 0 0 -1 02 43 1 0 0 0 -1 02 44 1 0 0 0 -1 02 45 1 0 0 0 -1 02 46 1 0 0 0 -1 02 47 1 0 0 0 -1 02 48 1 0 0 0 -1 02 49 1 0 0 0 -1 02 50 1 0 0 0 -1 02 51 1 0 0 0 -1 02 52 1 0 0 0 -1 02 53 1 0 0 0 -1 02 54 1 0 0 0 -1 02 55 1 0 0 0 -1 02 56 1 0 0 0 -1 02 57 1 0 0 0 -1 02 58 1 0 0 0 -1 02 59 1 0 0 0 -1 02 60 1 0 0 0 -1 02 61 1 0 0 0 -1 02 62 1 0 0 0 -1 02 63 1 0 0 0 -1 03 00 1 0 0 0 -1 03 01 1 0 0 0 -1 03 02 1 0 0 0 -1 03 03 1 0 0 0 -1 03 04 1 0 0 0 -1 03 05 1 0 0 0 -1 03 06 1 0 0 0 -1 03 07 1 0 0 0 -1 03 08 1 0 0 0 -1 03 09 1 0 0 0 -1 03 10 1 0 0 0 -1 03 11 1 0 0 0 -1 03 12 1 0 0 0 -1 03 13 1 0 0 0 -1 03 14 1 0 0 0 -1 03 15 1 0 0 0 -1 03 16 1 0 0 0 -1 03 17 1 0 0 0 -1 03 18 1 0 0 0 -1 03 19 1 0 0 0 -1 03 20 1 0 0 0 -1 03 21 1 0 0 0 -1 03 22 1 0 0 0 -1 03 23 1 0 0 0 -1 03 24 1 0 0 0 -1 03 25 1 0 0 0 -1 03 26 1 0 0 0 -1 03 27 1 0 0 0 -1 03 28 1 0 0 0 -1 03 29 1 0 0 0 -1 03 30 1 0 0 0 -1 03 31 1 0 0 0 -1 03 32 1 0 0 0 -1 03 33 1 0 0 0 -1 03 34 1 0 0 0 -1 03 35 1 0 0 0 -1 03 36 1 0 0 0 -1 03 37 1 0 0 0 -1 03 38 1 0 0 0 -1 03 39 1 0 0 0 -1 03 40 1 0 0 0 -1 03 41 1 0 0 0 -1 03 42 1 0 0 0 -1 03 43 1 0 0 0 -1 03 44 1 0 0 0 -1 03 45 1 0 0 0 -1 03 46 1 0 0 0 -1 03 47 1 0 0 0 -1 03 48 1 0 0 0 -1 03 49 1 0 0 0 -1 03 50 1 0 0 0 -1 03 51 1 0 0 0 -1 03 52 1 0 0 0 -1 03 53 1 0 0 0 -1 03 54 1 0 0 0 -1 03 55 1 0 0 0 -1 03 56 1 0 0 0 -1 03 57 1 0 0 0 -1 03 58 1 0 0 0 -1 03 59 1 0 0 0 -1 03 60 1 0 0 0 -1 03 61 1 0 0 0 -1 03 62 1 0 0 0 -1 03 63 1 0 0 0 -1 04 00 1 0 0 0 -1 04 01 1 0 0 0 -1 04 02 1 0 0 0 -1 04 03 1 0 0 0 -1 04 04 1 0 0 0 -1 04 05 1 0 0 0 -1 04 06 1 0 0 0 -1 04 07 1 0 0 0 -1 04 08 1 0 0 0 -1 04 09 1 0 0 0 -1 04 10 1 0 0 0 -1 04 11 1 0 0 0 -1 04 12 1 0 0 0 -1 04 13 1 0 0 0 -1 04 14 1 0 0 0 -1 04 15 1 0 0 0 -1 04 16 1 0 0 0 -1 04 17 1 0 0 0 -1 04 18 1 0 0 0 -1 04 19 1 0 0 0 -1 04 20 1 0 0 0 -1 04 21 1 0 0 0 -1 04 22 1 0 0 0 -1 04 23 1 0 0 0 -1 04 24 1 0 0 0 -1 04 25 1 0 0 0 -1 04 26 1 0 0 0 -1 04 27 1 0 0 0 -1 04 28 1 0 0 0 -1 04 29 1 0 0 0 -1 04 30 1 0 0 0 -1 04 31 1 0 0 0 -1 04 32 1 0 0 0 -1 04 33 1 0 0 0 -1 04 34 1 0 0 0 -1 04 35 1 0 0 0 -1 04 36 1 0 0 0 -1 04 37 1 0 0 0 -1 ... 3613 more lines ...
Attachment 3: matrix_config_piggy.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {mask} {en_inj} {hb_en} {en_sfout} {TDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1
Attachment 4: eudaq_config.cfg
[RunControl] EUDAQ_CTRL_PRODUCER_LAST_START = aida_tlu [LogCollector.log] [Producer.aida_tlu] verbose = 0 confid = 20181002 skipconf = 0 # delay start in ms delayStart = 0 #################################################### # DUT IN/OUTPUT # Mask: 0 CONT, 1 SPARE, 2 TRIG, 3 BUSY (1 = driven by TLU, 0 = driven by DUT) # EUDET mode: 7 HDMI1_set = 0x7 HDMI2_set = 0x7 HDMI3_set = 0x7 HDMI4_set = 0x7 # same as above for the clock line, 1 = AIDA mode, 2 = FPGA HDMI1_clk = 1 HDMI2_clk = 0 HDMI3_clk = 1 HDMI4_clk = 1 LEMOclk = 1 # if input, then also adjust clk.txt # Activate channels # Only TLU #DUTMask = 0x0 # Telescope at HDMI1 #DUTMask = 0x1 # Only FEI4 at HDMI2 #DUTMask = 0x2 # Telescope at HDMI1, FEI4 at HDMI2 #DUTMask = 0x3 #Adenium at HDMI3 #DUTMask = 0x1 #Adenium at HDMI1, MPW3 at HDMI3, Monopix2 at HDMI4 DUTMask = 0xD # Define mode: # Each DUT channel has two bits: HDMI1=0&1 bit; HDMI2= 2&3bit; ... # Only the lowest bit is significant: # AIDA mode for each "1st" LSbit = 1 # EUDET modes incl. DUT clocking out each "1st" LSbit = 0 # e.g. 1st and 2nd channel in EUDET mode: 0xF0 #DUTMaskMode = 0xF0 # 1st and 2nd channel are reading out Trigger ID # e.g. only 1st in EUDET mode #DUTMaskMode = 0xFC # 1st is reading out Trigger ID #!!!!!!!!!!!! Check this !!!!!!!!!!!!!!! #DUTMaskMode = 0x01 #I think this is AIDA mode for channel 3 and reading out trigger number #HDMI3 on AIDA with trigger number #DUTMaskMode = 0x31 #HDMI3+4 on AIDA with trigger number DUTMaskMode = 0xF1 # "Mixed mode" to ignore a busy line from a DUT # TLU ignores the telescope busy (at HDMI1) #DUTIgnoreBusy = 0x1 # yes (default, Mixed mode) DUTIgnoreBusy = 0xA #no (EUDET mode) ################################################### # ONLY AUTOTRIGGER #InternalTriggerFreq = 100 # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 7 # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 7 in1_DEL = 0 in2_STR = 7 in2_DEL = 0 in3_STR = 7 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # DAC INPUT THRESHOLD in V DACThreshold0 = -0.4 # Was -0.04, but we get amplyfied signal from NIM module DACThreshold1 = -0.4 # Was -0.04, but we get amplyfied signal from NIM module DACThreshold2 = -0.20 DACThreshold3 = -0.20 DACThreshold4 = -0.20 DACThreshold5 = -0.20 # PMT Power PMT1_V = 0.80 PMT2_V = 0.80 PMT3_V = 0.80 PMT4_V = 0.80 # 2 words 32bit: Hi + Lo # combinations of coincidence are now possible! # Coincidence of input 0 to 3 (telescope) #trigMaskHi = 0x00000000 #trigMaskLo = 0x00008000 # Coincidence of input 0 and 1 trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 # New: Coincidence of any 3 of 4, 4 combinations plus all 4 #trigMaskHi = 0x00000000 #trigMaskLo = 0x0000C880 # EUDAQ2 # Define the data collector to be used by the producer EUDAQ_DC = dc_tlu [DataCollector.dc_tlu] EUDAQ_ID=100 EUDAQ_MN=StdEventMonitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION=5 EUDAQ_FW = native EUDAQ_FW_PATTERN = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_tlu$X" DISABLE_PRINT = 1 ################################### Adenium ##################################### [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=dc_tel [DataCollector.dc_tel] EUDAQ_ID=100 EUDAQ_MN=StdEventMonitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION=1 EUDAQ_FW = native EUDAQ_FW_PATTERN = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_adenium$X" DISABLE_PRINT = 1 ################################### MPW3 ##################################### [Producer.RD50_MPW3] [DataCollector.mpw3_dc] # connection to the monitor EUDAQ_MN = mpw3_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/backup/desy_jul23/run$6R_mpw3$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 SYNC_MODE = 0 [Monitor.mpw3_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [Producer.elog_mpw3] # command (shell script) to execute before starting a run start_cmd = "./copy_configs.sh" #files to attach to the Elog entry files2log = "tmp/peary_config.cfg, tmp/matrix_config_base.txt, tmp/matrix_config_piggy.txt, tmp/eudaq_config.cfg" ################################################ MPX2 ##################################################### [Producer.monopix2] # connection to the data collector EUDAQ_DC = dc_mpx2 ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 # W08R19 #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/20230630_113951_threshold_scan_interpreted.h5 #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/HV_THR25_HVCasc_THR22_10V/20230708_095321_threshold_scan_interpreted.h5 #MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/masked_pixels.yaml #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/HV_THR25_HVCasc_THR22_10V/intermediate/20230630_132140_threshold_scan_interpreted.h5 #MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W02R09/masked_pixels.yaml CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/20230630_112801_global_threshold_tuning_interpreted.h5 MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W02R09/masked_pixels.yaml CHIP_SN = W02R09 CHIP_CMD_CLK = 160.0 #VCLIP = 255 #IBIAS = 100 # W02R09 HV FE #ITHR = 32 #VRESET = 100 #VCASP = 40 #IBIAS = 50 #ICASN = 0 #ITUNE = 100 #VCASC = 150 # W02R09 NFE #ITHR = 50 #VRESET = #VCASP = #IBIAS = 80 ICASN = 4 ITUNE = 0 #VCASC = 164 #overriding values in "scan_configuration" #when none given default ones are being used START_ROW = 0 STOP_ROW = 512 START_COLUMN = 100 STOP_COLUMN = 224 WAIT_FOR_FPGA = 1 CONFIG_ID = 46 ELOG_CATEGORY = Debug # Debug, Beam, VoltageScan, Scan COMMENT_IN_CONF = "PWELL = 5V PSUB = 6V, neutron-irradiated chip, non-local-tuned settings for Vienna chip, NF, unknown thr, 0 deg" ELOG_OUTPUT_PATH = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs" [Producer.hameg] HV = 3 BIAS = 6 SERIAL_PORT = /dev/ttyUSB0 [Monitor.monopix2_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [DataCollector.dc_mpx2] # connection to the monitor EUDAQ_MN = monopix2_mon EUDAQ_FW = native #path to store .raw file to, $3R is replaced by 3 digit run number, $12D -> 12 character date, $X -> .raw EUDAQ_FW_PATTERN = /media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_monopix2$X #fraction of events being sent to the monitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters #disable output of event to bash, is spamming terminal otherwise DISABLE_PRINT = 1 [Producer.tpx3] threshold = 1185 XMLConfig = /home/silicon/mpw3/spidr3_eudaq_operation/config_W2_E5_test_masked.t3x external_clock = 1 EUDAQ_DC = spidr_dc [DataCollector.spidr_dc] EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/backup/desy_jul23/run$6R_tpx3$X DISABLE_PRINT = 1
504	Sun Jul 16 12:24:02 2023	tb-crew	cooled unirradiated	1344	RD50-MPW3	unknown	90	unirradiated	1.9K	4.2	Low Flux Low	electron	Good	16.07.2023 12:19:03	16.07.2023 12:19:16	0
automatic log for run 1344 Comment: smiley
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW3] this_config_file = config_piggy_new.cfg #SEC::MISC accept_tlu_trigger = 0 enable_readout = 1 calib_file_base = calib_base.txt config_si5345 = clock_config.txt execute_file = execute.txt i2c_addr_base = 0x41 i2c_dev = /dev/i2c-9 matrix_config = matrix_config_base.txt dcol_hb = 5 disable_clk = 0 #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 0 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1.15 th__i = 3 [RD50_MPW3_Piggy] this_config_file = config_piggy_new.cfg #SEC::MISC calib_file = calib_piggy.txt execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 matrix_config = matrix_config_piggy.txt piggy_attached = 0 #SEC::REGISTERS conf_reg_ts_ctrl = 0 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36
Attachment 2: matrix_config_base.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {mask} {en_inj} {hb_en} {en_sfout} {TDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 05 13 1 0 0 0 -1 05 14 1 0 0 0 -1 05 15 1 0 0 0 -1 05 16 1 0 0 0 -1 05 17 1 0 0 0 -1 05 18 1 0 0 0 -1 05 19 1 0 0 0 -1 05 20 1 0 0 0 -1 05 21 1 0 0 0 -1 05 22 1 0 0 0 -1 05 23 1 0 0 0 -1 05 24 1 0 0 0 -1 05 25 1 0 0 0 -1 05 26 1 0 0 0 -1 05 27 1 0 0 0 -1 05 28 1 0 0 0 -1 05 29 1 0 0 0 -1 05 30 1 0 0 0 -1 05 31 1 0 0 0 -1 05 32 1 0 0 0 -1 05 33 1 0 0 0 -1 05 34 1 0 0 0 -1 05 35 1 0 0 0 -1 05 36 1 0 0 0 -1 05 37 1 0 0 0 -1 05 38 1 0 0 0 -1 05 39 1 0 0 0 -1 05 40 1 0 0 0 -1 05 41 1 0 0 0 -1 05 42 1 0 0 0 -1 05 43 1 0 0 0 -1 05 44 1 0 0 0 -1 05 45 1 0 0 0 -1 05 46 1 0 0 0 -1 05 47 1 0 0 0 -1 05 48 1 0 0 0 -1 05 49 1 0 0 0 -1 05 50 1 0 0 0 -1 05 51 1 0 0 0 -1 06 12 1 0 0 0 -1 06 13 1 0 0 0 -1 06 14 1 0 0 0 -1 06 15 1 0 0 0 -1 06 16 1 0 0 0 -1 06 17 1 0 0 0 -1 06 18 1 0 0 0 -1 06 19 1 0 0 0 -1 06 20 1 0 0 0 -1 06 21 1 0 0 0 -1 06 22 1 0 0 0 -1 06 23 1 0 0 0 -1 06 24 1 0 0 0 -1 06 25 1 0 0 0 -1 06 26 1 0 0 0 -1 06 27 1 0 0 0 -1 06 28 1 0 0 0 -1 06 29 1 0 0 0 -1 06 30 1 0 0 0 -1 06 31 1 0 0 0 -1 06 32 1 0 0 0 -1 06 33 1 0 0 0 -1 06 34 1 0 0 0 -1 06 35 1 0 0 0 -1 06 36 1 0 0 0 -1 06 37 1 0 0 0 -1 06 38 1 0 0 0 -1 06 39 1 0 0 0 -1 06 40 1 0 0 0 -1 06 41 1 0 0 0 -1 06 42 1 0 0 0 -1 06 43 1 0 0 0 -1 06 44 1 0 0 0 -1 06 45 1 0 0 0 -1 06 46 1 0 0 0 -1 06 47 1 0 0 0 -1 06 48 1 0 0 0 -1 06 49 1 0 0 0 -1 06 50 1 0 0 0 -1 06 51 1 0 0 0 -1 06 52 1 0 0 0 -1 07 11 1 0 0 0 -1 07 12 1 0 0 0 -1 07 13 1 0 0 0 -1 07 14 1 0 0 0 -1 07 15 1 0 0 0 -1 07 16 1 0 0 0 -1 07 17 1 0 0 0 -1 07 18 1 0 0 0 -1 07 19 1 0 0 0 -1 07 20 1 0 0 0 -1 07 21 1 0 0 0 -1 07 22 1 0 0 0 -1 07 23 1 0 0 0 -1 07 24 1 0 0 0 -1 07 25 1 0 0 0 -1 07 26 1 0 0 0 -1 07 27 1 0 0 0 -1 07 28 1 0 0 0 -1 07 29 1 0 0 0 -1 07 30 1 0 0 0 -1 07 31 1 0 0 0 -1 07 32 1 0 0 0 -1 07 33 1 0 0 0 -1 07 34 1 0 0 0 -1 07 35 1 0 0 0 -1 07 36 1 0 0 0 -1 07 37 1 0 0 0 -1 07 38 1 0 0 0 -1 07 39 1 0 0 0 -1 07 40 1 0 0 0 -1 07 41 1 0 0 0 -1 07 42 1 0 0 0 -1 07 43 1 0 0 0 -1 07 44 1 0 0 0 -1 07 45 1 0 0 0 -1 07 46 1 0 0 0 -1 07 47 1 0 0 0 -1 07 48 1 0 0 0 -1 07 49 1 0 0 0 -1 07 50 1 0 0 0 -1 07 51 1 0 0 0 -1 07 52 1 0 0 0 -1 07 53 1 0 0 0 -1 08 10 1 0 0 0 -1 08 11 1 0 0 0 -1 08 12 1 0 0 0 -1 08 13 1 0 0 0 -1 08 14 1 0 0 0 -1 08 50 1 0 0 0 -1 08 51 1 0 0 0 -1 08 52 1 0 0 0 -1 08 53 1 0 0 0 -1 08 54 1 0 0 0 -1 09 10 1 0 0 0 -1 09 11 1 0 0 0 -1 09 12 1 0 0 0 -1 09 13 1 0 0 0 -1 09 51 1 0 0 0 -1 09 52 1 0 0 0 -1 09 53 1 0 0 0 -1 09 54 1 0 0 0 -1 09 55 1 0 0 0 -1 10 08 1 0 0 0 -1 10 09 1 0 0 0 -1 10 10 1 0 0 0 -1 10 11 1 0 0 0 -1 10 12 1 0 0 0 -1 10 52 1 0 0 0 -1 10 53 1 0 0 0 -1 10 54 1 0 0 0 -1 10 55 1 0 0 0 -1 11 08 1 0 0 0 -1 11 09 1 0 0 0 -1 11 10 1 0 0 0 -1 11 11 1 0 0 0 -1 11 53 1 0 0 0 -1 11 54 1 0 0 0 -1 11 55 1 0 0 0 -1 52 08 1 0 0 0 -1 52 09 1 0 0 0 -1 52 10 1 0 0 0 -1 52 11 1 0 0 0 -1 52 52 1 0 0 0 -1 52 53 1 0 0 0 -1 52 54 1 0 0 0 -1 52 55 1 0 0 0 -1 53 08 1 0 0 0 -1 53 09 1 0 0 0 -1 53 10 1 0 0 0 -1 53 11 1 0 0 0 -1 53 52 1 0 0 0 -1 53 53 1 0 0 0 -1 53 54 1 0 0 0 -1 53 55 1 0 0 0 -1 54 08 1 0 0 0 -1 54 09 1 0 0 0 -1 54 10 1 0 0 0 -1 54 11 1 0 0 0 -1 54 52 1 0 0 0 -1 54 53 1 0 0 0 -1 54 54 1 0 0 0 -1 54 55 1 0 0 0 -1 55 08 1 0 0 0 -1 55 09 1 0 0 0 -1 55 10 1 0 0 0 -1 55 11 1 0 0 0 -1 55 52 1 0 0 0 -1 55 53 1 0 0 0 -1 55 54 1 0 0 0 -1 55 55 1 0 0 0 -1
Attachment 3: matrix_config_piggy.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {mask} {en_inj} {hb_en} {en_sfout} {TDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1
Attachment 4: eudaq_config.cfg
[RunControl] EUDAQ_CTRL_PRODUCER_LAST_START = aida_tlu [LogCollector.log] [Producer.aida_tlu] verbose = 0 confid = 20181002 skipconf = 0 # delay start in ms delayStart = 0 #################################################### # DUT IN/OUTPUT # Mask: 0 CONT, 1 SPARE, 2 TRIG, 3 BUSY (1 = driven by TLU, 0 = driven by DUT) # EUDET mode: 7 HDMI1_set = 0x7 HDMI2_set = 0x7 HDMI3_set = 0x7 HDMI4_set = 0x7 # same as above for the clock line, 1 = AIDA mode, 2 = FPGA HDMI1_clk = 1 HDMI2_clk = 0 HDMI3_clk = 1 HDMI4_clk = 1 LEMOclk = 1 # if input, then also adjust clk.txt # Activate channels # Only TLU #DUTMask = 0x0 # Telescope at HDMI1 #DUTMask = 0x1 # Only FEI4 at HDMI2 #DUTMask = 0x2 # Telescope at HDMI1, FEI4 at HDMI2 #DUTMask = 0x3 #Adenium at HDMI3 #DUTMask = 0x1 #Adenium at HDMI1, MPW3 at HDMI3, Monopix2 at HDMI4 DUTMask = 0xD # Define mode: # Each DUT channel has two bits: HDMI1=0&1 bit; HDMI2= 2&3bit; ... # Only the lowest bit is significant: # AIDA mode for each "1st" LSbit = 1 # EUDET modes incl. DUT clocking out each "1st" LSbit = 0 # e.g. 1st and 2nd channel in EUDET mode: 0xF0 #DUTMaskMode = 0xF0 # 1st and 2nd channel are reading out Trigger ID # e.g. only 1st in EUDET mode #DUTMaskMode = 0xFC # 1st is reading out Trigger ID #!!!!!!!!!!!! Check this !!!!!!!!!!!!!!! #DUTMaskMode = 0x01 #I think this is AIDA mode for channel 3 and reading out trigger number #HDMI3 on AIDA with trigger number #DUTMaskMode = 0x31 #HDMI3+4 on AIDA with trigger number DUTMaskMode = 0xF1 # "Mixed mode" to ignore a busy line from a DUT # TLU ignores the telescope busy (at HDMI1) #DUTIgnoreBusy = 0x1 # yes (default, Mixed mode) DUTIgnoreBusy = 0xA #no (EUDET mode) ################################################### # ONLY AUTOTRIGGER #InternalTriggerFreq = 100 # EXTERNAL TRIGGER INPUTs # Stretch, delay in 6.25ns ticks in0_STR = 7 # factor to stretch the width of the signal; to get coincidence in0_DEL = 0 # factor to delay, e.g. compensate in1_STR = 7 in1_DEL = 0 in2_STR = 7 in2_DEL = 0 in3_STR = 7 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 in5_DEL = 0 # DAC INPUT THRESHOLD in V DACThreshold0 = -0.4 # Was -0.04, but we get amplyfied signal from NIM module DACThreshold1 = -0.4 # Was -0.04, but we get amplyfied signal from NIM module DACThreshold2 = -0.20 DACThreshold3 = -0.20 DACThreshold4 = -0.20 DACThreshold5 = -0.20 # PMT Power PMT1_V = 0.80 PMT2_V = 0.80 PMT3_V = 0.80 PMT4_V = 0.80 # 2 words 32bit: Hi + Lo # combinations of coincidence are now possible! # Coincidence of input 0 to 3 (telescope) #trigMaskHi = 0x00000000 #trigMaskLo = 0x00008000 # Coincidence of input 0 and 1 trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 # New: Coincidence of any 3 of 4, 4 combinations plus all 4 #trigMaskHi = 0x00000000 #trigMaskLo = 0x0000C880 # EUDAQ2 # Define the data collector to be used by the producer EUDAQ_DC = dc_tlu [DataCollector.dc_tlu] EUDAQ_ID=100 EUDAQ_MN=StdEventMonitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION=5 EUDAQ_FW = native EUDAQ_FW_PATTERN = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_tlu$X" DISABLE_PRINT = 1 ################################### Adenium ##################################### [Producer.altel] EUDAQ_ID=1 EUDAQ_DC=dc_tel [DataCollector.dc_tel] EUDAQ_ID=100 EUDAQ_MN=StdEventMonitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION=1 EUDAQ_FW = native EUDAQ_FW_PATTERN = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_adenium$X" DISABLE_PRINT = 1 ################################### MPW3 ##################################### [Producer.RD50_MPW3] [DataCollector.mpw3_dc] # connection to the monitor EUDAQ_MN = mpw3_mon EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/backup/desy_jul23/run$6R_mpw3$X EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters DISABLE_PRINT = 1 XILINX_IP = 192.168.201.1 SYNC_MODE = 0 [Monitor.mpw3_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [Producer.elog_mpw3] # command (shell script) to execute before starting a run start_cmd = "./copy_configs.sh" #files to attach to the Elog entry files2log = "tmp/peary_config.cfg, tmp/matrix_config_base.txt, tmp/matrix_config_piggy.txt, tmp/eudaq_config.cfg" ################################################ MPX2 ##################################################### [Producer.monopix2] # connection to the data collector EUDAQ_DC = dc_mpx2 ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 # W08R19 #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/20230630_113951_threshold_scan_interpreted.h5 #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/HV_THR25_HVCasc_THR22_10V/20230708_095321_threshold_scan_interpreted.h5 #MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/masked_pixels.yaml #CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/HV_THR25_HVCasc_THR22_10V/intermediate/20230630_132140_threshold_scan_interpreted.h5 #MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W02R09/masked_pixels.yaml CHIP_CONFIG_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W08R19/NormalCascFE_THR25_6V/20230630_112801_global_threshold_tuning_interpreted.h5 MASKED_PIXELS_FILE = /media/bellevtx01/TOSHIBA EXT/configs/tuning/W02R09/masked_pixels.yaml CHIP_SN = W02R09 CHIP_CMD_CLK = 160.0 #VCLIP = 255 #IBIAS = 100 # W02R09 HV FE #ITHR = 32 #VRESET = 100 #VCASP = 40 #IBIAS = 50 #ICASN = 0 #ITUNE = 100 #VCASC = 150 # W02R09 NFE #ITHR = 50 #VRESET = #VCASP = #IBIAS = 80 ICASN = 4 ITUNE = 0 #VCASC = 164 #overriding values in "scan_configuration" #when none given default ones are being used START_ROW = 0 STOP_ROW = 512 START_COLUMN = 100 STOP_COLUMN = 224 WAIT_FOR_FPGA = 1 CONFIG_ID = 46 ELOG_CATEGORY = Debug # Debug, Beam, VoltageScan, Scan COMMENT_IN_CONF = "PWELL = 5V PSUB = 6V, neutron-irradiated chip, non-local-tuned settings for Vienna chip, NF, unknown thr, 0 deg" ELOG_OUTPUT_PATH = "/media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs" [Producer.hameg] HV = 3 BIAS = 6 SERIAL_PORT = /dev/ttyUSB0 [Monitor.monopix2_mon] ENABLE_PRINT = 0 ENABLE_STD_PRINT = 0 ENABLE_STD_CONVERTER = 1 FORWARD2GUI = 1 [DataCollector.dc_mpx2] # connection to the monitor EUDAQ_MN = monopix2_mon EUDAQ_FW = native #path to store .raw file to, $3R is replaced by 3 digit run number, $12D -> 12 character date, $X -> .raw EUDAQ_FW_PATTERN = /media/bellevtx01/TOSHIBA EXT/VTX/data_producer_runs/desy/run$6R_monopix2$X #fraction of events being sent to the monitor EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 # config-parameters #disable output of event to bash, is spamming terminal otherwise DISABLE_PRINT = 1 [Producer.tpx3] threshold = 1185 XMLConfig = /home/silicon/mpw3/spidr3_eudaq_operation/config_W2_E5_test_masked.t3x external_clock = 1 EUDAQ_DC = spidr_dc [DataCollector.spidr_dc] EUDAQ_FW = native EUDAQ_FW_PATTERN = /media/silicon/backup/desy_jul23/run$6R_tpx3$X DISABLE_PRINT = 1
1	Mon Jul 3 21:13:44 2023	tb-crew	initial tests		common	unknown		unirradiated	unknown	1.0		Proton	Unknown
test
2	Mon Jul 3 21:14:28 2023	tb-crew	initial tests		RD50-MPW3	unknown		unirradiated	1.9K	4.2		electron	Crap
tests
5	Mon Jul 3 22:52:06 2023	tb-crew	initial tests		RD50-MPW3	unknown		unirradiated	1.9K	4.2		electron	Crap
test
7	Mon Jul 3 22:54:48 2023	tb-crew	initial tests		RD50-MPW3	unknown		unirradiated	1.9K	4.2		electron	Crap
test
8	Tue Jul 4 10:43:30 2023	tb-crew	initial tests		RD50-MPW3	unknown		unirradiated	1.9K	4.2		electron	Crap
still testing without HV, don't expect hits
11	Tue Jul 4 13:45:31 2023	tb-crew	initial tests		RD50-MPW3	unknown		unirradiated	1.9K	4.2		electron	Crap
DUT biased, kind of aligned, hoping for the best
13	Tue Jul 4 14:00:05 2023	tb-crew	initial tests		RD50-MPW3	unknown		unirradiated	1.9K	4.2		electron	Crap
increased thr to 1.3V activity is "enabling" noise
17	Tue Jul 4 14:54:46 2023	tb-crew	initial tests		RD50-MPW3	unknown		unirradiated	1.9K	4.2		electron	Unknown
deactivated piggy due to 1st sync issues
20	Tue Jul 4 16:22:25 2023	tb-crew	initial tests		RD50-MPW3	unknown		unirradiated	1.9K	4.2		electron	Unknown
problems with automating elog
30	Tue Jul 4 18:31:58 2023	tb-crew	initial tests		RD50-MPW3	unknown		unirradiated	1.9K	4.2		electron	Unknown
playing around with threshold since a while (see Peary configs) as we don't see correlations yet (which might be hided in noise)
33	Wed Jul 5 09:15:19 2023	Bernhard Pilsl	Chnged Settings		RD50-MPW3
Now enabled piggy again
34	Wed Jul 5 09:41:53 2023	Bernhard Pilsl	changed settings
Just enabled a few pixels in piggy and base to reduce data

Goto page Previous 1, 2, 3 ... 21, 22, 23, 24, 25, 26 Next

ELOG V3.1.5-fc6679b