ELOG testbeam-MA2025

Home CMS Production Clean room MedAustron HEPHY testbeams old

testbeam-MA2018 testbeam-MA2019 testbeam-MA2020 testbeam-MA2021 testbeam-MA2023 testbeam-MA2024 testbeam-MA2025

Testbeams at MedAustron in 2025, Page 9 of 10

Not logged in

Find | Login | Help

New entries since:

Thu Jan 1 01:00:00 1970

Full | Summary | Threaded | Hide attachments

197 Entries

Goto page Previous 1, 2, 3 ... 8, 9, 10 Next All

ID	Date	Author	Subject	Run Number	DUT	Beam Energy	Rate Setting	Particle Type	Data	t-Start	t-Stop	Duration_min	Frontend	Phantom
133	Tue Aug 5 14:43:42 2025	elog_producer	Castid		TJ-Monopix2	800 MeV	Low Flux Medium	Proton	Crap				HV	None
test
134	Tue Aug 5 16:02:12 2025	elog_producer	Castid		TJ-Monopix2	800 MeV	Low Flux Medium	Proton	Crap				HV	None
manual test
135	Tue Aug 5 16:03:08 2025	elog_producer	Castid	45	TJ-Monopix2	800 MeV	Low Flux Medium	Proton	Crap	05.08.2025 16:03:03	05.08.2025 16:03:36	0	HV	None
automatic log for run 45 Comment: auto test
Attachment 1: tjmonopix2_tracker.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.6363 #Szinti 4x4cm PMT2_V= 0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000010 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 5000 #1000 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.025 #-0.025 #-0.012 DACThreshold2 = +0.5 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 # bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xF # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xF3 #0x00 # Full Monopix on all 4 DUTs # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0xF #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="tjmonopix2" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/castid-TB_MAUS_Aug25/data/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.W02R01] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W02R01/20240222_174415_threshold_scan_interpreted.h5 chip_sn = W02R01 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W02R01 online_monitor_port="5500" daqboard_ip = "192.168.10.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W08R19] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W08R19/20230708_095321_threshold_scan_interpreted.h5 chip_sn = W08R19 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W08R19 online_monitor_port="5510" daqboard_ip = "192.168.11.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W14R12] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W14R12/20250804_172438_threshold_scan_interpreted.h5 chip_sn = W14R12 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W14R12 online_monitor_port="5520" daqboard_ip = "192.168.12.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W18R03] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W18R03/20240222_183330_threshold_scan_interpreted.h5 chip_sn = W18R03 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W18R03 online_monitor_port="5530" daqboard_ip = "192.168.13.23" start_column=448 stop_column=512 start_row=0 stop_row=512 #[DataCollector.dc_monopix2] #EUDAQ_MN = monopix2_mon #EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 #EUDAQ_FW = native #EUDAQ_FW_PATTERN = /home/silicon/TJ-Monopix2/test-data/raw/mpx2_run$3R_$12D$X ##EUDAQ_FW_PATTERN = /home/mx/Schule/Nosync/EUDAQ/test_corry/raw/mpx2_run$3R_$12D$X #DISABLE_PRINT = 1
136	Tue Aug 5 16:12:07 2025	elog_producer	Castid		TJ-Monopix2	800 MeV	Low Flux Medium	Proton	Crap				HV	None
Test debugging tests for debugging to test debugging
137	Tue Aug 5 16:13:54 2025	elog_producer	Castid	46	TJ-Monopix2	800 MeV	Low Flux Medium	Proton	Crap	05.08.2025 16:12:04	05.08.2025 16:14:21	2	HV	None
automatic log for run 46 Comment: Test debugging tests for debugging
Attachment 1: tjmonopix2_tracker.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.6363 #Szinti 4x4cm PMT2_V= 0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000010 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 5000 #1000 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.025 #-0.025 #-0.012 DACThreshold2 = +0.5 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 # bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xF # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xF3 #0x00 # Full Monopix on all 4 DUTs # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0xF #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="tjmonopix2" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/castid-TB_MAUS_Aug25/data/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.W02R01] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W02R01/20240222_174415_threshold_scan_interpreted.h5 chip_sn = W02R01 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W02R01 online_monitor_port="5500" daqboard_ip = "192.168.10.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W08R19] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W08R19/20230708_095321_threshold_scan_interpreted.h5 chip_sn = W08R19 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W08R19 online_monitor_port="5510" daqboard_ip = "192.168.11.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W14R12] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W14R12/20250804_172438_threshold_scan_interpreted.h5 chip_sn = W14R12 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W14R12 online_monitor_port="5520" daqboard_ip = "192.168.12.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W18R03] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W18R03/20240222_183330_threshold_scan_interpreted.h5 chip_sn = W18R03 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W18R03 online_monitor_port="5530" daqboard_ip = "192.168.13.23" start_column=448 stop_column=512 start_row=0 stop_row=512 #[DataCollector.dc_monopix2] #EUDAQ_MN = monopix2_mon #EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 #EUDAQ_FW = native #EUDAQ_FW_PATTERN = /home/silicon/TJ-Monopix2/test-data/raw/mpx2_run$3R_$12D$X ##EUDAQ_FW_PATTERN = /home/mx/Schule/Nosync/EUDAQ/test_corry/raw/mpx2_run$3R_$12D$X #DISABLE_PRINT = 1
138	Tue Aug 5 16:45:37 2025	elog_producer	Castid	47	TJ-Monopix2	800 MeV	Low Flux Medium	Proton	Crap	05.08.2025 16:16:11	05.08.2025 16:46:04	29	HV	None
automatic log for run 47 Comment: Test debugging tests for debugging
Attachment 1: tjmonopix2_tracker.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.6363 #Szinti 4x4cm PMT2_V= 0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000010 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 5000 #1000 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.025 #-0.025 #-0.012 DACThreshold2 = +0.5 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 # bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xF # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xF3 #0x00 # Full Monopix on all 4 DUTs # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0xF #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="tjmonopix2" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/castid-TB_MAUS_Aug25/data/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.W02R01] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W02R01/20240222_174415_threshold_scan_interpreted.h5 chip_sn = W02R01 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W02R01 online_monitor_port="5500" daqboard_ip = "192.168.10.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W08R19] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W08R19/20230708_095321_threshold_scan_interpreted.h5 chip_sn = W08R19 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W08R19 online_monitor_port="5510" daqboard_ip = "192.168.11.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W14R12] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W14R12/20250804_172438_threshold_scan_interpreted.h5 chip_sn = W14R12 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W14R12 online_monitor_port="5520" daqboard_ip = "192.168.12.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W18R03] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W18R03/20240222_183330_threshold_scan_interpreted.h5 chip_sn = W18R03 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W18R03 online_monitor_port="5530" daqboard_ip = "192.168.13.23" start_column=448 stop_column=512 start_row=0 stop_row=512 #[DataCollector.dc_monopix2] #EUDAQ_MN = monopix2_mon #EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 #EUDAQ_FW = native #EUDAQ_FW_PATTERN = /home/silicon/TJ-Monopix2/test-data/raw/mpx2_run$3R_$12D$X ##EUDAQ_FW_PATTERN = /home/mx/Schule/Nosync/EUDAQ/test_corry/raw/mpx2_run$3R_$12D$X #DISABLE_PRINT = 1
139	Tue Aug 5 17:42:37 2025	elog_producer	Castid	48	TJ-Monopix2	800 MeV	Low Flux Medium	Proton	Crap	05.08.2025 16:59:08	05.08.2025 17:43:04	43	HV	None
automatic log for run 48 Comment:
Attachment 1: tjmonopix2_tracker.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.6363 #Szinti 4x4cm PMT2_V= 0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000010 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 5000 #1000 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.025 #-0.025 #-0.012 DACThreshold2 = +0.5 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 # bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xF # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xF3 #0x00 # Full Monopix on all 4 DUTs # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0xF #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="tjmonopix2" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/castid-TB_MAUS_Aug25/data/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.W02R01] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W02R01/20240222_174415_threshold_scan_interpreted.h5 chip_sn = W02R01 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W02R01 online_monitor_port="5500" daqboard_ip = "192.168.10.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W08R19] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W08R19/20230708_095321_threshold_scan_interpreted.h5 chip_sn = W08R19 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W08R19 online_monitor_port="5510" daqboard_ip = "192.168.11.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W14R12] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W14R12/20250804_172438_threshold_scan_interpreted.h5 chip_sn = W14R12 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W14R12 online_monitor_port="5520" daqboard_ip = "192.168.12.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W18R03] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W18R03/20240222_183330_threshold_scan_interpreted.h5 chip_sn = W18R03 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W18R03 online_monitor_port="5530" daqboard_ip = "192.168.13.23" start_column=448 stop_column=512 start_row=0 stop_row=512 #[DataCollector.dc_monopix2] #EUDAQ_MN = monopix2_mon #EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 #EUDAQ_FW = native #EUDAQ_FW_PATTERN = /home/silicon/TJ-Monopix2/test-data/raw/mpx2_run$3R_$12D$X ##EUDAQ_FW_PATTERN = /home/mx/Schule/Nosync/EUDAQ/test_corry/raw/mpx2_run$3R_$12D$X #DISABLE_PRINT = 1
140	Tue Aug 5 17:49:22 2025	elog_producer	Castid	50	TJ-Monopix2	800 MeV	Low Flux Medium	Proton	Crap	05.08.2025 17:46:44	05.08.2025 17:49:50	3	HV	None
automatic log for run 50 Comment:
Attachment 1: tjmonopix2_tracker.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.6363 #Szinti 4x4cm PMT2_V= 0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000010 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 5000 #1000 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.025 #-0.025 #-0.012 DACThreshold2 = +0.5 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 # bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xF # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xF3 #0x00 # Full Monopix on all 4 DUTs # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0xD #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="tjmonopix2" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/castid-TB_MAUS_Aug25/data/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.W02R01] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W02R01/20240222_174415_threshold_scan_interpreted.h5 chip_sn = W02R01 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W02R01 online_monitor_port="5500" daqboard_ip = "192.168.10.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W08R19] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W08R19/20230708_095321_threshold_scan_interpreted.h5 chip_sn = W08R19 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W08R19 online_monitor_port="5510" daqboard_ip = "192.168.11.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W14R12] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W14R12/20250804_172438_threshold_scan_interpreted.h5 chip_sn = W14R12 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W14R12 online_monitor_port="5520" daqboard_ip = "192.168.12.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W18R03] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W18R03/20240222_183330_threshold_scan_interpreted.h5 chip_sn = W18R03 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W18R03 online_monitor_port="5530" daqboard_ip = "192.168.13.23" start_column=448 stop_column=512 start_row=0 stop_row=512 #[DataCollector.dc_monopix2] #EUDAQ_MN = monopix2_mon #EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 #EUDAQ_FW = native #EUDAQ_FW_PATTERN = /home/silicon/TJ-Monopix2/test-data/raw/mpx2_run$3R_$12D$X ##EUDAQ_FW_PATTERN = /home/mx/Schule/Nosync/EUDAQ/test_corry/raw/mpx2_run$3R_$12D$X #DISABLE_PRINT = 1
141	Tue Aug 5 17:58:32 2025	elog_producer	Castid	51	TJ-Monopix2	800 MeV	Low Flux Medium	Proton	Crap	05.08.2025 17:52:17	05.08.2025 17:59:00	6	HV	None
automatic log for run 51 Comment:
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.6363 #Szinti 4x4cm PMT2_V= 0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000010 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 5000 #1000 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.025 #-0.025 #-0.012 DACThreshold2 = +0.5 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 # bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xF # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xFF #0x00 # Full Monopix on all 4 DUTs # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0xF #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="tjmonopix2" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/castid-TB_MAUS_Aug25/data/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.W02R01] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W02R01/20240222_174415_threshold_scan_interpreted.h5 chip_sn = W02R01 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W02R01 online_monitor_port="5500" daqboard_ip = "192.168.10.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W08R19] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W08R19/20230708_095321_threshold_scan_interpreted.h5 chip_sn = W08R19 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W08R19 online_monitor_port="5510" daqboard_ip = "192.168.11.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W14R12] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W14R12/20250804_172438_threshold_scan_interpreted.h5 chip_sn = W14R12 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W14R12 online_monitor_port="5520" daqboard_ip = "192.168.12.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W18R03] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W18R03/20240222_183330_threshold_scan_interpreted.h5 chip_sn = W18R03 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W18R03 online_monitor_port="5530" daqboard_ip = "192.168.13.23" start_column=448 stop_column=512 start_row=0 stop_row=512 #[DataCollector.dc_monopix2] #EUDAQ_MN = monopix2_mon #EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 #EUDAQ_FW = native #EUDAQ_FW_PATTERN = /home/silicon/TJ-Monopix2/test-data/raw/mpx2_run$3R_$12D$X ##EUDAQ_FW_PATTERN = /home/mx/Schule/Nosync/EUDAQ/test_corry/raw/mpx2_run$3R_$12D$X #DISABLE_PRINT = 1
142	Sat Aug 16 14:41:43 2025	elog_producer	Castid	52	TJ-Monopix2	800 MeV	Low Flux Medium	Proton	Crap	16.08.2025 14:41:28	16.08.2025 14:41:45	0	HV	None
automatic log for run 52 Comment:
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.6363 #Szinti 4x4cm PMT2_V= 0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000010 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 5000 #1000 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.025 #-0.025 #-0.012 DACThreshold2 = +0.5 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 # bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xF # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xFF #0x00 # Full Monopix on all 4 DUTs # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0xF #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="tjmonopix2" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/castid-TB_MAUS_Aug25/data/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.W02R01] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W02R01/20240222_174415_threshold_scan_interpreted.h5 chip_sn = W02R01 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W02R01 online_monitor_port="5500" daqboard_ip = "192.168.10.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W08R19] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W08R19/20230708_095321_threshold_scan_interpreted.h5 chip_sn = W08R19 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W08R19 online_monitor_port="5510" daqboard_ip = "192.168.11.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W14R12] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W14R12/20250804_172438_threshold_scan_interpreted.h5 chip_sn = W14R12 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W14R12 online_monitor_port="5520" daqboard_ip = "192.168.12.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W18R03] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W18R03/20240222_183330_threshold_scan_interpreted.h5 chip_sn = W18R03 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W18R03 online_monitor_port="5530" daqboard_ip = "192.168.13.23" start_column=448 stop_column=512 start_row=0 stop_row=512 #[DataCollector.dc_monopix2] #EUDAQ_MN = monopix2_mon #EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 #EUDAQ_FW = native #EUDAQ_FW_PATTERN = /home/silicon/TJ-Monopix2/test-data/raw/mpx2_run$3R_$12D$X ##EUDAQ_FW_PATTERN = /home/mx/Schule/Nosync/EUDAQ/test_corry/raw/mpx2_run$3R_$12D$X #DISABLE_PRINT = 1
143	Sat Aug 16 14:50:38 2025	elog_producer	Castid	53	TJ-Monopix2	800 MeV	Low Flux Medium	Proton	Crap	16.08.2025 14:43:57	16.08.2025 14:50:40	6	HV	None
automatic log for run 53 Comment:
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.6363 #Szinti 4x4cm PMT2_V= 0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000010 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) # InternalTriggerFreq= 5000 #1000 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.025 #-0.025 #-0.012 DACThreshold2 = +0.5 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 # bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xF # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xFF #0x00 # Full Monopix on all 4 DUTs # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0xF #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="tjmonopix2" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/castid-TB_MAUS_Aug25/data/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.W02R01] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W02R01/20240222_174415_threshold_scan_interpreted.h5 chip_sn = W02R01 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W02R01 online_monitor_port="5500" daqboard_ip = "192.168.10.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W08R19] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W08R19/20230708_095321_threshold_scan_interpreted.h5 chip_sn = W08R19 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W08R19 online_monitor_port="5510" daqboard_ip = "192.168.11.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W14R12] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W14R12/20250804_172438_threshold_scan_interpreted.h5 chip_sn = W14R12 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W14R12 online_monitor_port="5520" daqboard_ip = "192.168.12.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W18R03] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W18R03/20240222_183330_threshold_scan_interpreted.h5 chip_sn = W18R03 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W18R03 online_monitor_port="5530" daqboard_ip = "192.168.13.23" start_column=448 stop_column=512 start_row=0 stop_row=512 #[DataCollector.dc_monopix2] #EUDAQ_MN = monopix2_mon #EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 #EUDAQ_FW = native #EUDAQ_FW_PATTERN = /home/silicon/TJ-Monopix2/test-data/raw/mpx2_run$3R_$12D$X ##EUDAQ_FW_PATTERN = /home/mx/Schule/Nosync/EUDAQ/test_corry/raw/mpx2_run$3R_$12D$X #DISABLE_PRINT = 1
152	Sat Aug 16 15:59:21 2025	elog_producer	Castid	62	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Crap	16.08.2025 15:54:46	16.08.2025 15:59:23	4	HV	None
automatic log for run 62 Comment: power cycled the tlu
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.6363 #Szinti 4x4cm PMT2_V= 0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000010 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) # InternalTriggerFreq= 5000 #1000 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.012 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = +0.5 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 # bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xF # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xFF #0x00 # Full Monopix on all 4 DUTs # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0xF #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="tjmonopix2" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/castid-TB_MAUS_Aug25/data/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.W02R01] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W02R01/20240222_174415_threshold_scan_interpreted.h5 chip_sn = W02R01 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W02R01 online_monitor_port="5500" daqboard_ip = "192.168.10.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W08R19] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W08R19/20230708_095321_threshold_scan_interpreted.h5 chip_sn = W08R19 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W08R19 online_monitor_port="5510" daqboard_ip = "192.168.11.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W14R12] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W14R12/20250804_172438_threshold_scan_interpreted.h5 chip_sn = W14R12 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W14R12 online_monitor_port="5520" daqboard_ip = "192.168.12.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W18R03] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W18R03/20240222_183330_threshold_scan_interpreted.h5 chip_sn = W18R03 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W18R03 online_monitor_port="5530" daqboard_ip = "192.168.13.23" start_column=448 stop_column=512 start_row=0 stop_row=512 #[DataCollector.dc_monopix2] #EUDAQ_MN = monopix2_mon #EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 #EUDAQ_FW = native #EUDAQ_FW_PATTERN = /home/silicon/TJ-Monopix2/test-data/raw/mpx2_run$3R_$12D$X ##EUDAQ_FW_PATTERN = /home/mx/Schule/Nosync/EUDAQ/test_corry/raw/mpx2_run$3R_$12D$X #DISABLE_PRINT = 1
153	Sat Aug 16 16:03:13 2025	elog_producer	Castid	63	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Crap	16.08.2025 15:59:56	16.08.2025 16:03:15	3	HV	None
automatic log for run 63 Comment: debug tlu
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.6363 #Szinti 4x4cm PMT2_V= 0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000010 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 5 #1000 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.012 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = +0.5 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 # bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xF # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xFF #0x00 # Full Monopix on all 4 DUTs # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0xF #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="tjmonopix2" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/castid-TB_MAUS_Aug25/data/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.W02R01] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W02R01/20240222_174415_threshold_scan_interpreted.h5 chip_sn = W02R01 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W02R01 online_monitor_port="5500" daqboard_ip = "192.168.10.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W08R19] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W08R19/20230708_095321_threshold_scan_interpreted.h5 chip_sn = W08R19 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W08R19 online_monitor_port="5510" daqboard_ip = "192.168.11.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W14R12] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W14R12/20250804_172438_threshold_scan_interpreted.h5 chip_sn = W14R12 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W14R12 online_monitor_port="5520" daqboard_ip = "192.168.12.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W18R03] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W18R03/20240222_183330_threshold_scan_interpreted.h5 chip_sn = W18R03 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W18R03 online_monitor_port="5530" daqboard_ip = "192.168.13.23" start_column=448 stop_column=512 start_row=0 stop_row=512 #[DataCollector.dc_monopix2] #EUDAQ_MN = monopix2_mon #EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 #EUDAQ_FW = native #EUDAQ_FW_PATTERN = /home/silicon/TJ-Monopix2/test-data/raw/mpx2_run$3R_$12D$X ##EUDAQ_FW_PATTERN = /home/mx/Schule/Nosync/EUDAQ/test_corry/raw/mpx2_run$3R_$12D$X #DISABLE_PRINT = 1
154	Sat Aug 16 16:04:24 2025	elog_producer	Castid	64	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Crap	16.08.2025 16:03:55	16.08.2025 16:04:26	0	HV	None
automatic log for run 64 Comment: debug tlu
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.6363 #Szinti 4x4cm PMT2_V= 0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000010 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 5 #1000 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.012 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = +0.5 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 # bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xF # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xFF #0x00 # Full Monopix on all 4 DUTs # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0xF #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="tjmonopix2" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/castid-TB_MAUS_Aug25/data/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.W02R01] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W02R01/20240222_174415_threshold_scan_interpreted.h5 chip_sn = W02R01 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W02R01 online_monitor_port="5500" daqboard_ip = "192.168.10.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W08R19] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W08R19/20230708_095321_threshold_scan_interpreted.h5 chip_sn = W08R19 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W08R19 online_monitor_port="5510" daqboard_ip = "192.168.11.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W14R12] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W14R12/20250804_172438_threshold_scan_interpreted.h5 chip_sn = W14R12 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W14R12 online_monitor_port="5520" daqboard_ip = "192.168.12.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W18R03] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W18R03/20240222_183330_threshold_scan_interpreted.h5 chip_sn = W18R03 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W18R03 online_monitor_port="5530" daqboard_ip = "192.168.13.23" start_column=448 stop_column=512 start_row=0 stop_row=512 #[DataCollector.dc_monopix2] #EUDAQ_MN = monopix2_mon #EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 #EUDAQ_FW = native #EUDAQ_FW_PATTERN = /home/silicon/TJ-Monopix2/test-data/raw/mpx2_run$3R_$12D$X ##EUDAQ_FW_PATTERN = /home/mx/Schule/Nosync/EUDAQ/test_corry/raw/mpx2_run$3R_$12D$X #DISABLE_PRINT = 1
155	Sat Aug 16 16:07:41 2025	elog_producer	Castid	65	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Crap	16.08.2025 16:05:54	16.08.2025 16:07:42	1	HV	None
automatic log for run 65 Comment: debug tlu
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #Szinti 4x4cm PMT2_V= 0.8 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) #InternalTriggerFreq= 5 #1000 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.015 #-0.025 #-0.012 DACThreshold1 = -0.015 #-0.025 #-0.012 DACThreshold2 = +0.5 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 # bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xF # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xFF #0x00 # Full Monopix on all 4 DUTs # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0xF #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="tjmonopix2" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/castid-TB_MAUS_Aug25/data/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.W02R01] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W02R01/20240222_174415_threshold_scan_interpreted.h5 chip_sn = W02R01 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W02R01 online_monitor_port="5500" daqboard_ip = "192.168.10.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W08R19] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W08R19/20230708_095321_threshold_scan_interpreted.h5 chip_sn = W08R19 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W08R19 online_monitor_port="5510" daqboard_ip = "192.168.11.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W14R12] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W14R12/20250804_172438_threshold_scan_interpreted.h5 chip_sn = W14R12 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W14R12 online_monitor_port="5520" daqboard_ip = "192.168.12.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W18R03] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W18R03/20240222_183330_threshold_scan_interpreted.h5 chip_sn = W18R03 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W18R03 online_monitor_port="5530" daqboard_ip = "192.168.13.23" start_column=448 stop_column=512 start_row=0 stop_row=512 #[DataCollector.dc_monopix2] #EUDAQ_MN = monopix2_mon #EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 #EUDAQ_FW = native #EUDAQ_FW_PATTERN = /home/silicon/TJ-Monopix2/test-data/raw/mpx2_run$3R_$12D$X ##EUDAQ_FW_PATTERN = /home/mx/Schule/Nosync/EUDAQ/test_corry/raw/mpx2_run$3R_$12D$X #DISABLE_PRINT = 1
156	Sat Aug 16 16:10:30 2025	elog_producer	Castid	66	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Crap	16.08.2025 16:08:20	16.08.2025 16:10:32	2	HV	None
automatic log for run 66 Comment: debug tlu
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #Szinti 4x4cm PMT2_V= 0.8 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) #InternalTriggerFreq= 5 #1000 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.012 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = +0.5 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 # bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xF # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xFF #0x00 # Full Monopix on all 4 DUTs # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0xF #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="tjmonopix2" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/castid-TB_MAUS_Aug25/data/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.W02R01] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W02R01/20240222_174415_threshold_scan_interpreted.h5 chip_sn = W02R01 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W02R01 online_monitor_port="5500" daqboard_ip = "192.168.10.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W08R19] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W08R19/20230708_095321_threshold_scan_interpreted.h5 chip_sn = W08R19 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W08R19 online_monitor_port="5510" daqboard_ip = "192.168.11.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W14R12] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W14R12/20250804_172438_threshold_scan_interpreted.h5 chip_sn = W14R12 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W14R12 online_monitor_port="5520" daqboard_ip = "192.168.12.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W18R03] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W18R03/20240222_183330_threshold_scan_interpreted.h5 chip_sn = W18R03 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W18R03 online_monitor_port="5530" daqboard_ip = "192.168.13.23" start_column=448 stop_column=512 start_row=0 stop_row=512 #[DataCollector.dc_monopix2] #EUDAQ_MN = monopix2_mon #EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 #EUDAQ_FW = native #EUDAQ_FW_PATTERN = /home/silicon/TJ-Monopix2/test-data/raw/mpx2_run$3R_$12D$X ##EUDAQ_FW_PATTERN = /home/mx/Schule/Nosync/EUDAQ/test_corry/raw/mpx2_run$3R_$12D$X #DISABLE_PRINT = 1
161	Sat Aug 16 17:17:06 2025	elog_producer	Castid	71	TJ-Monopix2	800 MeV	Low Flux Medium	Proton	Crap	16.08.2025 17:16:03	16.08.2025 17:17:07	1	HV	None
automatic log for run 71 Comment: Operators called it 200kHz settings
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #Szinti 4x4cm PMT2_V= 0.8 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) #InternalTriggerFreq= 5 #1000 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.012 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = +0.5 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 # bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xF # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xFF #0x00 # Full Monopix on all 4 DUTs # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0xF #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="tjmonopix2" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/castid-TB_MAUS_Aug25/data/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.W02R01] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W02R01/20240222_174415_threshold_scan_interpreted.h5 chip_sn = W02R01 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W02R01 online_monitor_port="5500" daqboard_ip = "192.168.10.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W08R19] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W08R19/20230708_095321_threshold_scan_interpreted.h5 chip_sn = W08R19 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W08R19 online_monitor_port="5510" daqboard_ip = "192.168.11.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W14R12] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W14R12/20250804_172438_threshold_scan_interpreted.h5 chip_sn = W14R12 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W14R12 online_monitor_port="5520" daqboard_ip = "192.168.12.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W18R03] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W18R03/20240222_183330_threshold_scan_interpreted.h5 chip_sn = W18R03 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W18R03 online_monitor_port="5530" daqboard_ip = "192.168.13.23" start_column=448 stop_column=512 start_row=0 stop_row=512 #[DataCollector.dc_monopix2] #EUDAQ_MN = monopix2_mon #EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 #EUDAQ_FW = native #EUDAQ_FW_PATTERN = /home/silicon/TJ-Monopix2/test-data/raw/mpx2_run$3R_$12D$X ##EUDAQ_FW_PATTERN = /home/mx/Schule/Nosync/EUDAQ/test_corry/raw/mpx2_run$3R_$12D$X #DISABLE_PRINT = 1
163	Sat Aug 16 17:20:51 2025	elog_producer	Castid	73	TJ-Monopix2	800 MeV	Low Flux Medium	Proton	Crap	16.08.2025 17:19:51	16.08.2025 17:20:53	1	HV	None
automatic log for run 73 Comment: operators called it 200kHz settings
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #Szinti 4x4cm PMT2_V= 0.8 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) #InternalTriggerFreq= 5 #1000 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.012 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = +0.5 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 # bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xF # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xFF #0x00 # Full Monopix on all 4 DUTs # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0xF #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="tjmonopix2" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/castid-TB_MAUS_Aug25/data/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.W02R01] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W02R01/20240222_174415_threshold_scan_interpreted.h5 chip_sn = W02R01 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W02R01 online_monitor_port="5500" daqboard_ip = "192.168.10.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W08R19] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W08R19/20230708_095321_threshold_scan_interpreted.h5 chip_sn = W08R19 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W08R19 online_monitor_port="5510" daqboard_ip = "192.168.11.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W14R12] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W14R12/20250804_172438_threshold_scan_interpreted.h5 chip_sn = W14R12 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W14R12 online_monitor_port="5520" daqboard_ip = "192.168.12.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W18R03] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W18R03/20240222_183330_threshold_scan_interpreted.h5 chip_sn = W18R03 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W18R03 online_monitor_port="5530" daqboard_ip = "192.168.13.23" start_column=448 stop_column=512 start_row=0 stop_row=512 #[DataCollector.dc_monopix2] #EUDAQ_MN = monopix2_mon #EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 #EUDAQ_FW = native #EUDAQ_FW_PATTERN = /home/silicon/TJ-Monopix2/test-data/raw/mpx2_run$3R_$12D$X ##EUDAQ_FW_PATTERN = /home/mx/Schule/Nosync/EUDAQ/test_corry/raw/mpx2_run$3R_$12D$X #DISABLE_PRINT = 1
164	Sat Aug 16 17:22:50 2025	elog_producer	Castid	74	TJ-Monopix2	800 MeV	Low Flux Medium	Proton	Crap	16.08.2025 17:21:28	16.08.2025 17:22:52	1	HV	None
automatic log for run 74 Comment: operators called it 200kHz settings
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #Szinti 4x4cm PMT2_V= 0.8 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) #InternalTriggerFreq= 5 #1000 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.012 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = +0.5 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 # bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xF # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xFF #0x00 # Full Monopix on all 4 DUTs # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0xF #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="tjmonopix2" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/castid-TB_MAUS_Aug25/data/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.W02R01] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W02R01/20240222_174415_threshold_scan_interpreted.h5 chip_sn = W02R01 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W02R01 online_monitor_port="5500" daqboard_ip = "192.168.10.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W08R19] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W08R19/20230708_095321_threshold_scan_interpreted.h5 chip_sn = W08R19 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W08R19 online_monitor_port="5510" daqboard_ip = "192.168.11.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W14R12] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W14R12/20250804_172438_threshold_scan_interpreted.h5 chip_sn = W14R12 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W14R12 online_monitor_port="5520" daqboard_ip = "192.168.12.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W18R03] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W18R03/20240222_183330_threshold_scan_interpreted.h5 chip_sn = W18R03 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W18R03 online_monitor_port="5530" daqboard_ip = "192.168.13.23" start_column=448 stop_column=512 start_row=0 stop_row=512 #[DataCollector.dc_monopix2] #EUDAQ_MN = monopix2_mon #EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 #EUDAQ_FW = native #EUDAQ_FW_PATTERN = /home/silicon/TJ-Monopix2/test-data/raw/mpx2_run$3R_$12D$X ##EUDAQ_FW_PATTERN = /home/mx/Schule/Nosync/EUDAQ/test_corry/raw/mpx2_run$3R_$12D$X #DISABLE_PRINT = 1
165	Sat Aug 16 17:52:31 2025	elog_producer	Castid	75	TJ-Monopix2	800 MeV	Low Flux Medium	Proton	Crap	16.08.2025 17:51:44	16.08.2025 17:52:33	0	HV	None
automatic log for run 75 Comment:
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #Szinti 4x4cm PMT2_V= 0.8 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) #InternalTriggerFreq= 5 #1000 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.012 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = +0.5 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 # bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xF # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0xFF #0x00 # Full Monopix on all 4 DUTs # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0xF #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="tjmonopix2" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/castid-TB_MAUS_Aug25/data/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.W02R01] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W02R01/20240222_174415_threshold_scan_interpreted.h5 chip_sn = W02R01 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W02R01 online_monitor_port="5500" daqboard_ip = "192.168.10.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W08R19] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W08R19/20230708_095321_threshold_scan_interpreted.h5 chip_sn = W08R19 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W08R19 online_monitor_port="5510" daqboard_ip = "192.168.11.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W14R12] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W14R12/20250804_172438_threshold_scan_interpreted.h5 chip_sn = W14R12 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W14R12 online_monitor_port="5520" daqboard_ip = "192.168.12.23" start_column=448 stop_column=512 start_row=0 stop_row=512 [Producer.W18R03] # connection to the data collector chip_config_file = /home/silicon/castid-TB_MAUS_Aug25/config/tuning/W18R03/20240222_183330_threshold_scan_interpreted.h5 chip_sn = W18R03 output_directory = /home/silicon/castid-TB_MAUS_Aug25/data/W18R03 online_monitor_port="5530" daqboard_ip = "192.168.13.23" start_column=448 stop_column=512 start_row=0 stop_row=512 #[DataCollector.dc_monopix2] #EUDAQ_MN = monopix2_mon #EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 #EUDAQ_FW = native #EUDAQ_FW_PATTERN = /home/silicon/TJ-Monopix2/test-data/raw/mpx2_run$3R_$12D$X ##EUDAQ_FW_PATTERN = /home/mx/Schule/Nosync/EUDAQ/test_corry/raw/mpx2_run$3R_$12D$X #DISABLE_PRINT = 1

Goto page Previous 1, 2, 3 ... 8, 9, 10 Next All

ELOG V3.1.5-fc6679b