ELOG testbeam-MA2024

Home CMS Production Clean room MedAustron HEPHY testbeams old

testbeam-MA2018 testbeam-MA2019 testbeam-MA2020 testbeam-MA2021 testbeam-MA2023 testbeam-MA2024

Testbeams at MedAustron in 2024, Page 3 of 11

Not logged in

Find | Login | Help

Full | Summary | Threaded | Hide attachments

217 Entries

Goto page Previous 1, 2, 3, 4 ... 9, 10, 11 Next All

ID	Date	Author	Subject	Run Number	DUT	Beam Energy	Rate Setting	Particle Type	Data	t-Start	t-Stop	Duration_min	Frontend
43	Sat Mar 30 13:35:09 2024	bp, ci, hh	useful datataking		RD50-MPW4	800 MeV	Low Flux Low	Proton	Good				Normal
new users arrived
44	Sat Mar 30 15:02:07 2024	hh, mb, ps	1st tests	1027	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Unknown	30.03.2024 14:52:54	30.03.2024 15:04:32	11	HV
automatic log for run 1027 Comment:
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 0 HDMI2_clk = 1 HDMI3_clk = 0 HDMI4_clk = 0 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xB # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x00 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x3 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.tjmonopix2_AB] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_AB ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_AB] EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X DISABLE_PRINT = 1 [Producer.tjmonopix2_CD] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_CD ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_CD] EUDAQ_MN = monopix2_mon EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X DISABLE_PRINT = 1 [Producer.elog1] #start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run #files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
45	Sat Mar 30 15:05:28 2024	hh, mb, ps	1st tests	1028	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Unknown	30.03.2024 15:04:47	30.03.2024 15:07:55	3	HV
automatic log for run 1028 Comment:
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 0 HDMI2_clk = 1 HDMI3_clk = 0 HDMI4_clk = 0 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xB # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x00 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x3 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.tjmonopix2_AB] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_AB ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_AB] EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X DISABLE_PRINT = 1 [Producer.tjmonopix2_CD] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_CD ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_CD] EUDAQ_MN = monopix2_mon EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X DISABLE_PRINT = 1 [Producer.elog1] #start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run #files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
46	Sat Mar 30 15:08:33 2024	hh, mb, ps	1st tests	1029	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Unknown	30.03.2024 15:08:26	30.03.2024 15:11:00	2	HV
automatic log for run 1029 Comment:
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 0 HDMI2_clk = 1 HDMI3_clk = 0 HDMI4_clk = 0 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xB # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x00 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x3 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.tjmonopix2_AB] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_AB ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_AB] EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X DISABLE_PRINT = 1 [Producer.tjmonopix2_CD] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_CD ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_CD] EUDAQ_MN = monopix2_mon EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X DISABLE_PRINT = 1 [Producer.elog1] #start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run #files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
47	Sat Mar 30 15:18:29 2024	hh, mb, ps	1st tests	1030	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Unknown	30.03.2024 15:18:21	30.03.2024 15:20:55	2	HV
automatic log for run 1030 Comment:
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 0 HDMI2_clk = 1 HDMI3_clk = 0 HDMI4_clk = 0 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xB # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x00 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x3 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.tjmonopix2_AB] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_AB ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_AB] EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X DISABLE_PRINT = 1 [Producer.tjmonopix2_CD] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_CD ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_CD] EUDAQ_MN = monopix2_mon EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X DISABLE_PRINT = 1 [Producer.elog1] #start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run #files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
48	Sat Mar 30 15:20:37 2024	hh, mb, ps	1st tests	1031	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Unknown	30.03.2024 15:21:51	30.03.2024 15:23:03	1	HV
automatic log for run 1031 Comment:
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 0 HDMI2_clk = 1 HDMI3_clk = 0 HDMI4_clk = 0 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xB # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x00 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x3 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.tjmonopix2_AB] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_AB ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_AB] EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X DISABLE_PRINT = 1 [Producer.tjmonopix2_CD] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_CD ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_CD] EUDAQ_MN = monopix2_mon EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X DISABLE_PRINT = 1 [Producer.elog1] #start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run #files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
49	Sat Mar 30 15:22:15 2024	hh, mb, ps	1st tests	1032	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Unknown	30.03.2024 15:24:02	30.03.2024 15:24:41	0	HV
automatic log for run 1032 Comment:
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 0 HDMI2_clk = 1 HDMI3_clk = 0 HDMI4_clk = 0 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xC # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x00 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x3 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.tjmonopix2_AB] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_AB ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_AB] EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X DISABLE_PRINT = 1 [Producer.tjmonopix2_CD] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_CD ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_CD] EUDAQ_MN = monopix2_mon EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X DISABLE_PRINT = 1 [Producer.elog1] #start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run #files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
50	Sat Mar 30 15:24:44 2024	hh, mb, ps	1st tests	1033	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Unknown	30.03.2024 15:25:06	30.03.2024 15:27:10	2	HV
automatic log for run 1033 Comment:
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 0 HDMI2_clk = 1 HDMI3_clk = 0 HDMI4_clk = 0 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xC # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x00 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x3 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.tjmonopix2_AB] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_AB ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_AB] EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X DISABLE_PRINT = 1 [Producer.tjmonopix2_CD] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_CD ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_CD] EUDAQ_MN = monopix2_mon EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X DISABLE_PRINT = 1 [Producer.elog1] #start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run #files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
51	Sat Mar 30 15:31:41 2024	hh, mb, ps	1st tests	1034	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Unknown	30.03.2024 15:29:49	30.03.2024 15:34:08	4	HV
automatic log for run 1034 Comment:
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 0 HDMI2_clk = 1 HDMI3_clk = 0 HDMI4_clk = 0 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xC # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x00 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x3 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.tjmonopix2_AB] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_AB ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_AB] EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X DISABLE_PRINT = 1 [Producer.tjmonopix2_CD] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_CD ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_CD] EUDAQ_MN = monopix2_mon EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X DISABLE_PRINT = 1 [Producer.elog1] #start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run #files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
52	Sat Mar 30 15:39:06 2024	hh, mb, ps	1st tests	1035	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Unknown	30.03.2024 15:35:06	30.03.2024 15:41:33	6	HV
automatic log for run 1035 All four chips enabled now Comment:
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 0 HDMI2_clk = 1 HDMI3_clk = 0 HDMI4_clk = 0 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xC # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x00 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x3 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.tjmonopix2_AB] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_AB ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_AB] EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X DISABLE_PRINT = 1 [Producer.tjmonopix2_CD] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_CD ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_CD] EUDAQ_MN = monopix2_mon EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X DISABLE_PRINT = 1 [Producer.elog1] #start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run #files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
53	Sat Mar 30 15:51:21 2024	hh, mb, ps	1st tests	1036	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Unknown	30.03.2024 15:43:53	30.03.2024 15:53:47	9	HV
automatic log for run 1036 Comment:
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 0 HDMI2_clk = 1 HDMI3_clk = 0 HDMI4_clk = 0 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xC # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x00 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x3 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.tjmonopix2_AB] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_AB ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_AB] EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X DISABLE_PRINT = 1 [Producer.tjmonopix2_CD] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_CD ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_CD] EUDAQ_MN = monopix2_mon EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X DISABLE_PRINT = 1 [Producer.elog1] #start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run #files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
54	Sat Mar 30 15:55:32 2024	hh, mb, ps	1st tests	1037	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Unknown	30.03.2024 15:54:44	30.03.2024 15:57:59	3	HV
automatic log for run 1037 Comment:
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 0 HDMI2_clk = 1 HDMI3_clk = 0 HDMI4_clk = 0 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xC # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x00 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x3 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.tjmonopix2_AB] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_AB ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_AB] EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X DISABLE_PRINT = 1 [Producer.tjmonopix2_CD] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_CD ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_CD] EUDAQ_MN = monopix2_mon EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X DISABLE_PRINT = 1 [Producer.elog1] #start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run #files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
55	Sat Mar 30 16:03:35 2024	hh, mb, ps	1st tests	1038	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Unknown	30.03.2024 16:03:18	30.03.2024 16:06:01	2	HV
automatic log for run 1038 Comment:
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 0 HDMI2_clk = 1 HDMI3_clk = 0 HDMI4_clk = 0 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xC # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x00 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x7 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.tjmonopix2_AB] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_AB ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_AB] EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X DISABLE_PRINT = 1 [Producer.tjmonopix2_CD] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_CD ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_CD] EUDAQ_MN = monopix2_mon EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X DISABLE_PRINT = 1 [Producer.elog1] #start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run #files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
56	Sat Mar 30 16:09:54 2024	hh, mb, ps	1st tests	1039	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Unknown	30.03.2024 16:11:32	30.03.2024 16:12:21	0	HV
automatic log for run 1039 Comment:
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 0 HDMI2_clk = 1 HDMI3_clk = 0 HDMI4_clk = 0 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xC # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x00 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x3 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.tjmonopix2_AB] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_AB ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_AB] EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X DISABLE_PRINT = 1 [Producer.tjmonopix2_CD] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_CD ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_CD] EUDAQ_MN = monopix2_mon EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X DISABLE_PRINT = 1 [Producer.elog1] #start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run #files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
57	Sat Mar 30 16:15:20 2024	hh, mb, ps	1st tests	1040	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Unknown	30.03.2024 16:15:22	30.03.2024 16:17:46	2	HV
automatic log for run 1040 Comment:
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 0 HDMI2_clk = 1 HDMI3_clk = 0 HDMI4_clk = 0 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 10 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xC # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x00 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x3 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.tjmonopix2_AB] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_AB ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_AB] EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X DISABLE_PRINT = 1 [Producer.tjmonopix2_CD] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_CD ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_CD] EUDAQ_MN = monopix2_mon EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X DISABLE_PRINT = 1 [Producer.elog1] #start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run #files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
58	Sat Mar 30 16:24:39 2024	hh, mb, ps	1st tests	1041	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Unknown	30.03.2024 16:20:34	30.03.2024 16:27:05	6	HV
automatic log for run 1041 Comment:
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 0 HDMI2_clk = 0 HDMI3_clk = 0 HDMI4_clk = 0 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xC # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x00 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x3 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.tjmonopix2_AB] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_AB ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_AB] EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X DISABLE_PRINT = 1 [Producer.tjmonopix2_CD] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_CD ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_CD] EUDAQ_MN = monopix2_mon EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X DISABLE_PRINT = 1 [Producer.elog1] #start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run #files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
59	Sat Mar 30 16:38:41 2024	hh, mb, ps	1st tests	1042	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Unknown	30.03.2024 16:32:12	30.03.2024 16:41:08	8	HV
automatic log for run 1042 Comment: First good run
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 0 HDMI2_clk = 0 HDMI3_clk = 0 HDMI4_clk = 0 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xA # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x00 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.tjmonopix2_AB] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_AB ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_AB] EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X DISABLE_PRINT = 1 [Producer.tjmonopix2_CD] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_CD ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_CD] EUDAQ_MN = monopix2_mon EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X DISABLE_PRINT = 1 [Producer.elog1] #start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run #files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
60	Sat Mar 30 16:50:35 2024	hh, mb, ps	1st tests	1043	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Unknown	30.03.2024 16:48:39	30.03.2024 16:53:01	4	HV
automatic log for run 1043 Comment:
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 0 HDMI2_clk = 0 HDMI3_clk = 0 HDMI4_clk = 0 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xA # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x00 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.tjmonopix2_AB] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_AB ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_AB] EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X DISABLE_PRINT = 1 [Producer.tjmonopix2_CD] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_CD ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_CD] EUDAQ_MN = monopix2_mon EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X DISABLE_PRINT = 1 [Producer.elog1] #start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run #files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
61	Sat Mar 30 17:00:53 2024	hh, mb, ps	1st tests	1044	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Unknown	30.03.2024 16:57:08	30.03.2024 17:03:20	6	HV
automatic log for run 1044 Comment:
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 0 HDMI2_clk = 0 HDMI3_clk = 0 HDMI4_clk = 0 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xA # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x00 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.tjmonopix2_AB] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_AB ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_AB] EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X DISABLE_PRINT = 1 [Producer.tjmonopix2_CD] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_CD ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_CD] EUDAQ_MN = monopix2_mon EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X DISABLE_PRINT = 1 [Producer.elog1] #start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run #files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
62	Sat Mar 30 17:07:45 2024	hh, mb, ps	1st tests	1045	TJ-Monopix2	800 MeV	Low Flux Low	Proton	Unknown	30.03.2024 17:07:01	30.03.2024 17:10:12	3	HV
automatic log for run 1045 Comment:
Attachment 1: tjmonopix2.conf
# example config file: Ex0.conf [RunControl] #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 # from the base RunControl.cc #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 # Steer which values to display in the GUI: producerName and displayed value are seperated by a ",". ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER" [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 0 HDMI2_clk = 0 HDMI3_clk = 0 HDMI4_clk = 0 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION PMT1_V= 0.8 #0.6363 #Szinti 4x4cm PMT2_V= 0.8 #0.6363 #Szinti 4x4cm PMT3_V= 0.0 PMT4_V= 0.0 ## TRIGGER CONFIGURATION trigMaskHi = 0x00000000 trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2 in0_STR = 0 # 0 in0_DEL = 0 # 18 in1_STR = 0 # 0 in1_DEL = 0 # 18 in2_STR = 0 # 0 in2_DEL = 0 # 0 in3_STR = 0 in3_DEL = 0 in4_STR = 0 in4_DEL = 0 in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns in5_DEL = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = -0.025 #-0.025 #-0.012 DACThreshold1 = -0.012 #-0.025 #-0.012 DACThreshold2 = -0.012 DACThreshold3 = -0.12 DACThreshold4 = -0.12 #-0.0066 DACThreshold5 = -0.12 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask= 0xA # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode= 0x00 #0x00 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData = 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc ## TLU MONITOR PARAMETER FileComment="mpw3" PlotWindowSizeinns=40e9 MinSpillTimeOnins=4.5 MinSpilldownTimeins=0.5 ThreshEvBegin=1 ThreshEvEnd=1 ThreshPartBegin=1 ThreshPartEnd=1 [LogCollector.log] # Currently, all LogCollectors have a hardcoded runtime name: log # nothing [DataCollector.tlu_dc] EUDAQ_FW=native # the format of data file EUDAQ_FW_PATTERN= /home/silicon/Data/2024_03_MAUS/TLU/tlu_run$6R$X # the name pattern of data file # the $12D will be converted a data/time string with 12 digits. # the $6R will be converted a run number string with 6 digits. # the $X will be converted the suffix name of data file. DISABLE_PRINT = 1 [Producer.tjmonopix2_AB] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_AB ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_AB] EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_AB_$12D$X DISABLE_PRINT = 1 [Producer.tjmonopix2_CD] # connection to the data collector EUDAQ_DC = dc_tjmonopix2_CD ENABLE_BDAQ_RECORD = 1 ENABLE_HITOR = 1 START_ROW = 0 STOP_ROW = 512 START_COLUMN = 448 STOP_COLUMN = 512 WAIT_FOR_FPGA = 1 [DataCollector.dc_tjmonopix2_CD] EUDAQ_MN = monopix2_mon EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 1000 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/Data/2024_03_MAUS/TJ-Monopix2/raw/run$3R_tjmonopix2_CD_$12D$X DISABLE_PRINT = 1 [Producer.elog1] #start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run #files2log = "peary_config.cfg, matrix_mpw4.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default

Goto page Previous 1, 2, 3, 4 ... 9, 10, 11 Next All

ELOG V3.1.5-fc6679b