| ID |
Date |
Author |
Subject |
Run Number |
DUT |
Beam Energy |
Rate Setting |
Particle Type |
Data |
t-Start |
t-Stop |
Duration_min |
Frontend |
Phantom |
Phantom thickness |
|
91
|
Sun Jun 9 00:10:38 2024 |
Felix Ulrich-Pur | TOF CAL HADES LGADs WET Messung Wasser | 20 | TOF-Cal GSI | 145.4 MeV | Low Flux High | Proton | Good | 23:31 | 00:00 | | | | | 5 cm plastic water (in isocentre)
2 Mhz on Ramon (after 5 Layers of Silicon and close to second iso centre) and 330 kHz on LGAD
14 min break with beam off (DAQ failed, had to power cycle TRB3s and all DIRICH boards-->out of synch DIRICH)
WET measurement |
|
93
|
Sun Jun 9 01:22:48 2024 |
Felix Ulrich-Pur | TOF CAL HADES LGADs WET Messung Knochen | 22 | TOF-Cal GSI | 145.4 MeV | Low Flux High | Proton | Good | 00:14 | 00:23 | | | | | 1 cm dense bone (in isocentre)
2.8 Mhz on Ramon (after 5 Layers of Silicon and close to second iso centre) and 600 kHz on LGAD
WET measurement |
|
95
|
Sun Jun 9 01:26:56 2024 |
Felix Ulrich-Pur | TOF CAL HADES LGADs WET Messung Knochen | 24 | TOF-Cal GSI | 145.4 MeV | Low Flux High | Proton | Good | 01:02 | 01:14 | | | | | 2 cm dense bone (in isocentre)
2.1 Mhz on Ramon (after 5 Layers of Silicon and close to second iso centre) and 315 kHz on LGAD
WET measurement |
|
97
|
Sun Jun 9 01:32:51 2024 |
Felix Ulrich-Pur | TOF CAL HADES LGADs WET Messung Knochen | 26 | TOF-Cal GSI | 145.4 MeV | Low Flux High | Proton | Good | 01:30 | 01:45 | | | | | 3 cm dense bone (in isocentre)
1.7 Mhz on Ramon (after 5 Layers of Silicon and close to second iso centre) and 230 kHz on LGAD
WET measurement |
|
100
|
Sun Jun 9 02:02:16 2024 |
Felix Ulrich-Pur | TOF CAL HADES LGADs WET Messung Knochen | 28 | TOF-Cal GSI | 145.4 MeV | Low Flux High | Proton | Good | 02:00 | 02:14 | | | | | 4 cm dense bone (in isocentre)
1.4 Mhz on Ramon (after 5 Layers of Silicon and close to second iso centre) and 175 kHz on LGAD
WET measurement |
|
143
|
Sat Dec 14 12:53:28 2024 |
Felix Ulrich-Pur | Shift 23.11.24 low flux He test with RaMon | 4 | RaMon | 124.4 MeV/u | Low Flux Medium | Helium | Good | 06:33 | 06:33 | 1 | | | | Mean rate per spill~ 2-8E5 p/s (online estimation without proper analysis) |
|
150
|
Sat Dec 14 12:58:35 2024 |
Felix Ulrich-Pur | Shift 23.11.24 low flux He test with RaMon | 11 | RaMon | 124.4 MeV/u | Low Flux High | Helium | Good | 06:43 | 06:43 | 1 | | | | Mean rate per spill~ 4Ee6 p/s (online estimation without proper analysis) |
|
162
|
Sat Dec 14 13:35:59 2024 |
Felix Ulrich-Pur | Energy vs TOF calibration | 23 | TOF-Cal GSI (TRB)+DOGMA setup(diamond+LGAD)+RaMon | 124.4 MeV/u | Low Flux High | Helium | Good | 11:24 | 11:37 | 13 | | | | TRB Setup: 260V bias and 250mA pre-amps, threshold 1000
5MHz with Ramon and only 500kHz TRB |
|
77
|
Sat Jun 8 20:08:55 2024 |
Felix Ulrich-Pur | TOF CAL HADES LGADs Calibrationcurve | 6 | TOF-Cal GSI | 115.7MeV | Low Flux Medium | Proton | Good | 18:24 | 19:00 | | | | | 400 khz on Ramon (after 5 Layers of Silicon and close to second iso centre) and 65kHz on LGAD
TOF Calibration Curve |
|
78
|
Sat Jun 8 20:09:25 2024 |
Felix Ulrich-Pur | TOF CAL HADES LGADs Calibrationcurve | 7 | TOF-Cal GSI | 100.4 MeV | Low Flux Medium | Proton | Good | 19:00 | 19:42 | | | | | 300 khz on Ramon (after 5 Layers of Silicon and close to second iso centre) and 65kHz on LGAD
TOF Calibration Curve |
|
136
|
Sun Aug 25 12:39:45 2024 |
tb-crew | only base | 70 | RD50-MPW4 | 100.4 MeV | Low Flux Very Low | Proton | Unknown | 25.08.2024 12:24:36 | 25.08.2024 12:40:12 | 15 | Normal | | | automatic log for run 70
Comment:
E-scan |
| Attachment 1: peary_config.cfg
|
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing
[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = cBase
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_base.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 4
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0.7
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 0.96
th__i = 3
[RD50_MPW4_Piggy]
this_config_file = config.cfg
#SEC::MISC
calib_file = cPiggy
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols =
en_sfout_dcol = 0
en_tb_mode = 0
execute_file = execute.txt
i2c_addr = 0x47
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_piggy.txt
#SEC::REGISTERS
conf_reg_ts_ctrl = 4
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36
#SEC::POWER
# voltages with suffix "__u", currents with "__i"
|
| Attachment 2: matrix_mpw4_base.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 0 0 0 15
00 01 0 0 0 0 0
00 02 0 0 0 0 15
00 03 0 0 0 0 13
00 04 0 0 0 0 11
00 05 0 0 0 0 15
00 06 0 0 0 0 15
00 07 0 0 0 0 8
00 08 0 0 0 0 0
00 09 0 0 0 0 15
00 10 0 0 0 0 8
00 11 0 0 0 0 7
00 12 0 0 0 0 15
00 13 0 0 0 0 0
00 14 0 0 0 0 8
00 15 0 0 0 0 4
00 16 0 0 0 0 3
00 17 0 0 0 0 15
00 18 0 0 0 0 15
00 19 0 0 0 0 15
00 20 0 0 0 0 0
00 21 0 0 0 0 0
00 22 0 0 0 0 15
00 23 0 0 0 0 9
00 24 0 0 0 0 15
00 25 0 0 0 0 6
00 26 0 0 0 0 0
00 27 0 0 0 0 0
00 28 0 0 0 0 14
00 29 0 0 0 0 0
00 30 0 0 0 0 7
00 31 0 0 0 0 0
00 32 0 0 0 0 12
00 33 0 0 0 0 5
00 34 0 0 0 0 15
00 35 0 0 0 0 12
00 36 0 0 0 0 15
00 37 0 0 0 0 11
00 38 0 0 0 0 0
00 39 0 0 0 0 9
00 40 0 0 0 0 15
00 41 0 0 0 0 0
00 42 0 0 0 0 15
00 43 0 0 0 0 4
00 44 0 0 0 0 1
00 45 0 0 0 0 15
00 46 0 0 0 0 1
00 47 0 0 0 0 0
00 48 0 0 0 0 0
00 49 0 0 0 0 0
00 50 0 0 0 0 0
00 51 0 0 0 0 0
00 52 0 0 0 0 15
00 53 0 0 0 0 8
00 54 0 0 0 0 11
00 55 0 0 0 0 11
00 56 0 0 0 0 15
00 57 0 0 0 0 0
00 58 0 0 0 0 4
00 59 0 0 0 0 0
00 60 0 0 0 0 12
00 61 0 0 0 0 0
00 62 0 0 0 0 15
00 63 0 0 0 0 15
01 00 0 0 0 0 15
01 01 0 0 0 0 10
01 02 0 0 0 0 15
01 03 0 0 0 0 3
01 04 0 0 0 0 7
01 05 0 0 0 0 0
01 06 0 0 0 0 5
01 07 0 0 0 0 12
01 08 0 0 0 0 11
01 09 0 0 0 0 15
01 10 0 0 0 0 8
01 11 0 0 0 0 7
01 12 0 0 0 0 14
01 13 0 0 0 0 15
01 14 0 0 0 0 14
01 15 0 0 0 0 0
01 16 0 0 0 0 0
01 17 0 0 0 0 15
01 18 0 0 0 0 1
01 19 0 0 0 0 15
01 20 0 0 0 0 6
01 21 0 0 0 0 15
01 22 0 0 0 0 0
01 23 0 0 0 0 15
01 24 0 0 0 0 0
01 25 0 0 0 0 0
01 26 0 0 0 0 6
01 27 0 0 0 0 4
01 28 0 0 0 0 0
01 29 0 0 0 0 0
01 30 0 0 0 0 0
01 31 0 0 0 0 0
01 32 0 0 0 0 10
01 33 0 0 0 0 6
01 34 0 0 0 0 15
01 35 0 0 0 0 11
01 36 0 0 0 0 4
01 37 0 0 0 0 9
01 38 0 0 0 0 15
01 39 0 0 0 0 10
01 40 0 0 0 0 12
01 41 0 0 0 0 5
01 42 0 0 0 0 15
01 43 0 0 0 0 0
01 44 0 0 0 0 5
01 45 0 0 0 0 15
01 46 0 0 0 0 10
01 47 0 0 0 0 0
01 48 0 0 0 0 0
01 49 0 0 0 0 8
01 50 0 0 0 0 15
01 51 0 0 0 0 6
01 52 0 0 0 0 4
01 53 0 0 0 0 0
01 54 0 0 0 0 15
01 55 0 0 0 0 0
01 56 0 0 0 0 10
01 57 0 0 0 0 15
01 58 0 0 0 0 0
01 59 0 0 0 0 5
01 60 0 0 0 0 8
01 61 0 0 0 0 14
01 62 0 0 0 0 11
01 63 0 0 0 0 15
02 00 0 0 0 0 3
02 01 0 0 0 0 15
02 02 0 0 0 0 15
02 03 0 0 0 0 13
02 04 0 0 0 0 15
02 05 0 0 0 0 11
02 06 0 0 0 0 15
02 07 0 0 0 0 15
02 08 0 0 0 0 15
02 09 0 0 0 0 12
02 10 0 0 0 0 11
02 11 0 0 0 0 0
02 12 0 0 0 0 7
02 13 0 0 0 0 9
02 14 0 0 0 0 11
02 15 0 0 0 0 2
02 16 0 0 0 0 15
02 17 0 0 0 0 13
02 18 0 0 0 0 12
02 19 0 0 0 0 15
02 20 0 0 0 0 15
02 21 0 0 0 0 7
02 22 0 0 0 0 2
02 23 0 0 0 0 15
02 24 0 0 0 0 10
02 25 0 0 0 0 9
02 26 0 0 0 0 7
02 27 0 0 0 0 5
02 28 0 0 0 0 15
02 29 0 0 0 0 15
02 30 0 0 0 0 14
02 31 0 0 0 0 15
02 32 0 0 0 0 13
02 33 0 0 0 0 7
02 34 0 0 0 0 0
02 35 0 0 0 0 7
02 36 0 0 0 0 1
02 37 0 0 0 0 15
02 38 0 0 0 0 3
02 39 0 0 0 0 11
02 40 0 0 0 0 7
02 41 0 0 0 0 13
02 42 0 0 0 0 4
02 43 0 0 0 0 15
02 44 0 0 0 0 0
02 45 0 0 0 0 15
02 46 0 0 0 0 15
02 47 0 0 0 0 0
02 48 0 0 0 0 8
02 49 0 0 0 0 15
02 50 0 0 0 0 0
02 51 0 0 0 0 12
02 52 0 0 0 0 7
02 53 0 0 0 0 11
02 54 0 0 0 0 0
02 55 0 0 0 0 2
02 56 0 0 0 0 0
02 57 0 0 0 0 0
02 58 0 0 0 0 15
02 59 0 0 0 0 15
02 60 0 0 0 0 14
02 61 0 0 0 0 15
02 62 0 0 0 0 0
02 63 0 0 0 0 12
03 00 0 0 0 0 11
03 01 0 0 0 0 15
03 02 0 0 0 0 3
03 03 0 0 0 0 0
03 04 0 0 0 0 14
03 05 0 0 0 0 15
03 06 0 0 0 0 5
03 07 0 0 0 0 7
03 08 0 0 0 0 0
03 09 0 0 0 0 10
03 10 0 0 0 0 0
03 11 0 0 0 0 0
03 12 0 0 0 0 15
03 13 0 0 0 0 5
03 14 0 0 0 0 15
03 15 0 0 0 0 0
03 16 0 0 0 0 0
03 17 0 0 0 0 15
03 18 0 0 0 0 15
03 19 0 0 0 0 0
03 20 0 0 0 0 2
03 21 0 0 0 0 0
03 22 0 0 0 0 3
03 23 0 0 0 0 6
03 24 0 0 0 0 8
03 25 0 0 0 0 0
03 26 0 0 0 0 15
03 27 0 0 0 0 4
03 28 0 0 0 0 10
03 29 0 0 0 0 15
03 30 0 0 0 0 0
03 31 0 0 0 0 15
03 32 0 0 0 0 0
03 33 0 0 0 0 0
03 34 0 0 0 0 6
03 35 0 0 0 0 7
03 36 0 0 0 0 8
03 37 0 0 0 0 7
03 38 0 0 0 0 15
03 39 0 0 0 0 15
03 40 0 0 0 0 0
03 41 0 0 0 0 0
03 42 0 0 0 0 15
03 43 0 0 0 0 15
03 44 0 0 0 0 1
03 45 0 0 0 0 15
03 46 0 0 0 0 3
03 47 0 0 0 0 1
03 48 0 0 0 0 3
03 49 0 0 0 0 12
03 50 0 0 0 0 0
03 51 0 0 0 0 1
03 52 0 0 0 0 4
03 53 0 0 0 0 14
03 54 0 0 0 0 3
03 55 0 0 0 0 15
03 56 0 0 0 0 10
03 57 0 0 0 0 0
03 58 0 0 0 0 15
03 59 0 0 0 0 8
03 60 0 0 0 0 0
03 61 0 0 0 0 0
03 62 0 0 0 0 0
03 63 0 0 0 0 3
04 00 0 0 0 0 0
04 01 0 0 0 0 15
04 02 0 0 0 0 15
04 03 0 0 0 0 2
04 04 0 0 0 0 10
04 05 0 0 0 0 15
04 06 0 0 0 0 15
04 07 0 0 0 0 15
04 08 0 0 0 0 3
04 09 0 0 0 0 0
04 10 0 0 0 0 0
04 11 0 0 0 0 14
04 12 0 0 0 0 11
04 13 0 0 0 0 9
04 14 0 0 0 0 0
04 15 0 0 0 0 15
04 16 0 0 0 0 0
04 17 0 0 0 0 7
04 18 0 0 0 0 12
04 19 0 0 0 0 15
04 20 0 0 0 0 15
04 21 0 0 0 0 8
04 22 0 0 0 0 5
04 23 0 0 0 0 15
04 24 0 0 0 0 5
04 25 0 0 0 0 0
04 26 0 0 0 0 14
04 27 0 0 0 0 13
04 28 0 0 0 0 13
04 29 0 0 0 0 12
04 30 0 0 0 0 0
04 31 0 0 0 0 2
04 32 0 0 0 0 7
04 33 0 0 0 0 3
04 34 0 0 0 0 8
04 35 0 0 0 0 0
04 36 0 0 0 0 0
04 37 0 0 0 0 15
... 3802 more lines ...
|
| Attachment 3: matrix_mpw4_piggy.txt
|
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC}
# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1
00 00 0 1 0 0 0
00 01 0 0 0 0 0
00 02 0 0 0 0 15
00 03 0 0 0 0 11
00 04 0 0 0 0 11
00 05 0 0 0 0 6
00 06 0 0 0 0 0
00 07 0 0 0 0 0
00 08 0 0 0 0 7
00 09 0 0 0 0 3
00 10 0 0 0 0 15
00 11 0 0 0 0 6
00 12 0 0 0 0 6
00 13 0 0 0 0 5
00 14 0 0 0 0 15
00 15 0 0 0 0 15
00 16 0 0 0 0 1
00 17 0 0 0 0 15
00 18 0 0 0 0 15
00 19 0 0 0 0 7
00 20 0 0 0 0 6
00 21 0 0 0 0 0
00 22 0 0 0 0 15
00 23 0 0 0 0 10
00 24 0 0 0 0 14
00 25 0 0 0 0 0
00 26 0 0 0 0 15
00 27 0 0 0 0 0
00 28 0 0 0 0 3
00 29 0 0 0 0 0
00 30 0 0 0 0 11
00 31 0 0 0 0 0
00 32 0 0 0 0 6
00 33 0 0 0 0 6
00 34 0 0 0 0 11
00 35 0 0 0 0 7
00 36 0 0 0 0 15
00 37 0 0 0 0 15
00 38 0 0 0 0 8
00 39 0 0 0 0 0
00 40 0 0 0 0 1
00 41 0 0 0 0 7
00 42 0 0 0 0 8
00 43 0 0 0 0 0
00 44 0 0 0 0 7
00 45 0 0 0 0 9
00 46 0 0 0 0 15
00 47 0 0 0 0 10
00 48 0 0 0 0 15
00 49 0 0 0 0 6
00 50 0 0 0 0 14
00 51 0 0 0 0 15
00 52 0 0 0 0 15
00 53 0 0 0 0 6
00 54 0 0 0 0 15
00 55 0 0 0 0 7
00 56 0 0 0 0 15
00 57 0 0 0 0 15
00 58 0 0 0 0 15
00 59 0 0 0 0 15
00 60 0 0 0 0 15
00 61 0 0 0 0 15
00 62 0 0 0 0 15
00 63 0 0 0 0 9
01 00 0 0 0 0 0
01 01 0 0 0 0 0
01 02 0 0 0 0 8
01 03 0 0 0 0 4
01 04 0 0 0 0 9
01 05 0 0 0 0 0
01 06 0 0 0 0 9
01 07 0 0 0 0 0
01 08 0 0 0 0 15
01 09 0 0 0 0 0
01 10 0 0 0 0 15
01 11 0 0 0 0 1
01 12 0 0 0 0 13
01 13 0 0 0 0 0
01 14 0 0 0 0 0
01 15 0 0 0 0 7
01 16 0 0 0 0 15
01 17 0 0 0 0 0
01 18 0 0 0 0 6
01 19 0 0 0 0 4
01 20 0 0 0 0 6
01 21 0 0 0 0 0
01 22 0 0 0 0 0
01 23 0 0 0 0 14
01 24 0 0 0 0 1
01 25 0 0 0 0 6
01 26 0 0 0 0 7
01 27 0 0 0 0 0
01 28 0 0 0 0 13
01 29 0 0 0 0 0
01 30 0 0 0 0 15
01 31 0 0 0 0 7
01 32 0 0 0 0 15
01 33 0 0 0 0 13
01 34 0 0 0 0 15
01 35 0 0 0 0 0
01 36 0 0 0 0 0
01 37 0 0 0 0 0
01 38 0 0 0 0 15
01 39 0 0 0 0 0
01 40 0 0 0 0 1
01 41 0 0 0 0 0
01 42 0 0 0 0 0
01 43 0 0 0 0 15
01 44 0 0 0 0 12
01 45 0 0 0 0 7
01 46 0 0 0 0 15
01 47 0 0 0 0 8
01 48 0 0 0 0 11
01 49 0 0 0 0 0
01 50 0 0 0 0 15
01 51 0 0 0 0 3
01 52 0 0 0 0 15
01 53 0 0 0 0 2
01 54 0 0 0 0 15
01 55 0 0 0 0 7
01 56 0 0 0 0 15
01 57 0 0 0 0 15
01 58 0 0 0 0 15
01 59 0 0 0 0 0
01 60 0 0 0 0 15
01 61 0 0 0 0 14
01 62 0 0 0 0 6
01 63 0 0 0 0 7
02 00 0 0 0 0 15
02 01 0 0 0 0 3
02 02 0 0 0 0 5
02 03 0 0 0 0 0
02 04 0 0 0 0 6
02 05 0 0 0 0 0
02 06 0 0 0 0 7
02 07 0 0 0 0 4
02 08 0 0 0 0 8
02 09 0 0 0 0 6
02 10 0 0 0 0 15
02 11 0 0 0 0 0
02 12 0 0 0 0 12
02 13 0 0 0 0 5
02 14 0 0 0 0 4
02 15 0 0 0 0 0
02 16 0 0 0 0 15
02 17 0 0 0 0 0
02 18 0 0 0 0 15
02 19 0 0 0 0 0
02 20 0 0 0 0 7
02 21 0 0 0 0 15
02 22 0 0 0 0 5
02 23 0 0 0 0 0
02 24 0 0 0 0 6
02 25 0 0 0 0 0
02 26 0 0 0 0 15
02 27 0 0 0 0 9
02 28 0 0 0 0 10
02 29 0 0 0 0 0
02 30 0 0 0 0 10
02 31 0 0 0 0 11
02 32 0 0 0 0 13
02 33 0 0 0 0 13
02 34 0 0 0 0 15
02 35 0 0 0 0 0
02 36 0 0 0 0 15
02 37 0 0 0 0 4
02 38 0 0 0 0 0
02 39 0 0 0 0 0
02 40 0 0 0 0 6
02 41 0 0 0 0 7
02 42 0 0 0 0 15
02 43 0 0 0 0 6
02 44 0 0 0 0 10
02 45 0 0 0 0 4
02 46 0 0 0 0 15
02 47 0 0 0 0 15
02 48 0 0 0 0 15
02 49 0 0 0 0 9
02 50 0 0 0 0 3
02 51 0 0 0 0 7
02 52 0 0 0 0 15
02 53 0 0 0 0 9
02 54 0 0 0 0 15
02 55 0 0 0 0 3
02 56 0 0 0 0 14
02 57 0 0 0 0 15
02 58 0 0 0 0 15
02 59 0 0 0 0 14
02 60 0 0 0 0 15
02 61 0 0 0 0 9
02 62 0 0 0 0 15
02 63 0 0 0 0 15
03 00 0 0 0 0 15
03 01 0 0 0 0 14
03 02 0 0 0 0 15
03 03 0 0 0 0 10
03 04 0 0 0 0 15
03 05 0 0 0 0 0
03 06 0 0 0 0 0
03 07 0 0 0 0 0
03 08 0 0 0 0 15
03 09 0 0 0 0 8
03 10 0 0 0 0 14
03 11 0 0 0 0 0
03 12 0 0 0 0 12
03 13 0 0 0 0 0
03 14 0 0 0 0 11
03 15 0 0 0 0 6
03 16 0 0 0 0 15
03 17 0 0 0 0 0
03 18 0 0 0 0 15
03 19 0 0 0 0 0
03 20 0 0 0 0 15
03 21 0 0 0 0 8
03 22 0 0 0 0 8
03 23 0 0 0 0 14
03 24 0 0 0 0 15
03 25 0 0 0 0 0
03 26 0 0 0 0 14
03 27 0 0 0 0 15
03 28 0 0 0 0 5
03 29 0 0 0 0 0
03 30 0 0 0 0 4
03 31 0 0 0 0 0
03 32 0 0 0 0 7
03 33 0 0 0 0 7
03 34 0 0 0 0 15
03 35 0 0 0 0 0
03 36 0 0 0 0 8
03 37 0 0 0 0 0
03 38 0 0 0 0 15
03 39 0 0 0 0 7
03 40 0 0 0 0 6
03 41 0 0 0 0 4
03 42 0 0 0 0 13
03 43 0 0 0 0 6
03 44 0 0 0 0 15
03 45 0 0 0 0 8
03 46 0 0 0 0 5
03 47 0 0 0 0 0
03 48 0 0 0 0 0
03 49 0 0 0 0 9
03 50 0 0 0 0 12
03 51 0 0 0 0 13
03 52 0 0 0 0 7
03 53 0 0 0 0 0
03 54 0 0 0 0 15
03 55 0 0 0 0 0
03 56 0 0 0 0 6
03 57 0 0 0 0 11
03 58 0 0 0 0 12
03 59 0 0 0 0 7
03 60 0 0 0 0 11
03 61 0 0 0 0 15
03 62 0 0 0 0 9
03 63 0 0 0 0 0
04 00 0 0 0 0 10
04 01 0 0 0 0 12
04 02 0 0 0 0 4
04 03 0 0 0 0 0
04 04 0 0 0 0 0
04 05 0 0 0 0 0
04 06 0 0 0 0 7
04 07 0 0 0 0 6
04 08 0 0 0 0 15
04 09 0 0 0 0 4
04 10 0 0 0 0 4
04 11 0 0 0 0 2
04 12 0 0 0 0 15
04 13 0 0 0 0 0
04 14 0 0 0 0 5
04 15 0 0 0 0 8
04 16 0 0 0 0 8
04 17 0 0 0 0 6
04 18 0 0 0 0 6
04 19 0 0 0 0 3
04 20 0 0 0 0 13
04 21 0 0 0 0 15
04 22 0 0 0 0 15
04 23 0 0 0 0 7
04 24 0 0 0 0 15
04 25 0 0 0 0 8
04 26 0 0 0 0 8
04 27 0 0 0 0 8
04 28 0 0 0 0 11
04 29 0 0 0 0 8
04 30 0 0 0 0 3
04 31 0 0 0 0 2
04 32 0 0 0 0 15
04 33 0 0 0 0 10
04 34 0 0 0 0 15
04 35 0 0 0 0 7
04 36 0 0 0 0 15
04 37 0 0 0 0 0
... 3802 more lines ...
|
| Attachment 4: mpw4.conf
|
# example config file: Ex0.conf
[RunControl]
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
# from the base RunControl.cc
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
# Steer which values to display in the GUI: producerName and displayed value are seperated by a ",".
ADDITIONAL_DISPLAY_NUMBERS = "log,_SERVER"
[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200
## HDMI CONFIGURATION
# 4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
# Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
# Enable/Disable clock on differential LEMO
LEMOclk = 0
## PMT POWER CONFIGURATION
PMT1_V= 0.8 #0.6363 #Szinti 4x4cm
PMT2_V= 0.8 #0.6363 #Szinti 4x4cm
PMT3_V= 0.0
PMT4_V= 0.0
## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000008 #0x00000008 #0x00010002 #0x00000001 #8 coinc1+2
in0_STR = 0 # 0
in0_DEL = 0 # 18
in1_STR = 0 # 0
in1_DEL = 0 # 18
in2_STR = 0 # 0
in2_DEL = 0 # 0
in3_STR = 0
in3_DEL = 0
in4_STR = 0
in4_DEL = 0
in5_STR = 0 #streches pulse from 6.25ns (at 0) to 12.5ns
in5_DEL = 0
# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00
## DISCRIMINATOR THRESHOLDS
DACThreshold0 = -0.025 #-0.025 #-0.012
DACThreshold1 = -0.025 #-0.025 #-0.012
DACThreshold2 = -0.012
DACThreshold3 = -0.12
DACThreshold4 = -0.12 #-0.0066
DACThreshold5 = -0.12
## DUT CONFIGURATION
# DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask= 0x6
# DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode= 0x30 #0x00
# In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben
# Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData = 1
# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)
## DATA COLLECTOR
EUDAQ_DC= tlu_dc
## TLU MONITOR PARAMETER
FileComment="mpw3"
PlotWindowSizeinns=40e9
MinSpillTimeOnins=4.5
MinSpilldownTimeins=0.5
ThreshEvBegin=1
ThreshEvEnd=1
ThreshPartBegin=1
ThreshPartEnd=1
[LogCollector.log]
# Currently, all LogCollectors have a hardcoded runtime name: log
# nothing
[DataCollector.tlu_dc]
EUDAQ_FW=native
# the format of data file
EUDAQ_FW_PATTERN= /media/silicon/testbeam_data/mpw4_maus_240825/tlu/tlu_run$6R$X
# the name pattern of data file
# the $12D will be converted a data/time string with 12 digits.
# the $6R will be converted a run number string with 6 digits.
# the $X will be converted the suffix name of data file.
DISABLE_PRINT = 1
[Producer.RD50_MPW4_0]
#register_key = "vnfb"
#register_value = 0x12
[DataCollector.mpw4_dc]
# connection to the monitor
EUDAQ_MN = mpw4_mon
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/mpw4_maus_240825/mpw4/mpw4_run$6R$X
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
# config-parameters
DISABLE_PRINT = 1
XILINX_IP = 192.168.201.1
[Monitor.mpw4_mon]
ENABLE_PRINT = 0
ENABLE_STD_PRINT = 0
ENABLE_STD_CONVERTER = 1
FORWARD2GUI = 1
[Producer.elog1]
start_cmd = "./get_mpw4_configs.sh" # command (shell script) to execute before starting a run
files2log = "peary_config.cfg, matrix_mpw4_base.txt, matrix_mpw4_piggy.txt" #files to attach to the auto Elog entries, EUDAQ config will be logged by default
|
|
1
|
Sat Mar 30 06:34:39 2024 |
Bernhard Pilsl | And a new testbeam starts :D | | | | | | | | | | | | | |
|
11
|
Sat Mar 30 08:05:59 2024 |
Christian Irmler | RD50-MPW4 | 999 | | | | | | | | | | | | Tracker calibration run: mpw4-tj-monopix2_00-000999.xml
Generated global xml file for MPW4 shift: mpw4-tj-monopix2_TLU_00-000999.xml
Previous local runs and xml files (mpw4-tj-monopix2_00-000212.xml) are unusable, because sensor L5.1.1.0 had a loose cotact and thus low gain.
Fixed by disconnecting and reconnecting. |
123
|
Sun Aug 25 10:02:35 2024 |
RD50 Generic User | init_geo_file | | | | | | | | | | | | | position of duts needs to be switched |
| Attachment 1: detectors.geo
|
[TLU_0]
role = auxiliary
type = tlu
number_of_pixels = 0, 0
pixel_pitch = 0um, 0um
position = 0mm, 0mm, 5m
orientation = 0deg, 0deg, 0deg
time_resolution = 0ns
[dssd_5_1_1]
type = dssd
number_of_pixels = 512, 512
pixel_pitch = 100um, 50um
position = 0mm, 0mm, 0mm
orientation = 0deg, 0deg, 0deg
spatial_resolution = 29um,14.5um
material_budget = 0.0032021081576535286
time_resolution = 10000s
[dssd_5_1_2]
type = dssd
number_of_pixels = 512, 512
pixel_pitch = 100um, 50um
position = 0mm, 0mm, 50mm
orientation = 0deg, 0deg, 0deg
spatial_resolution = 29um,14.5um
material_budget = 0.0032021081576535286
time_resolution = 10000s
role = reference
[RD50_MPWx_0]
#mask_file = mask_maus.txt
role = dut
type = RD50_MPWx
number_of_pixels = 64, 64
pixel_pitch = 62um, 62um
position = 0mm, 0mm, 77.5mm
orientation = 90deg,0deg,180deg
orientation_mode = "zyx"
time_resolution = 25ns
material_budget = 0.00320305
[RD50_MPWx_1]
#mask_file = mask_maus.txt
role = dut
type = RD50_MPWx
number_of_pixels = 64, 64
pixel_pitch = 62um, 62um
position = 0mm, 0mm, 109.5mm
orientation = 90deg,0deg,180deg
orientation_mode = "zyx"
time_resolution = 25ns
material_budget = 0.00320305
[dssd_5_1_3]
type = dssd
number_of_pixels = 512, 512
pixel_pitch = 100um, 50um
position = 0mm, 0mm, 232.5mm
orientation = 0deg, 0deg, 0deg
spatial_resolution = 29um,14.5um
material_budget = 0.0032021081576535286
time_resolution = 10000s
#role = reference
[dssd_5_1_4]
type = dssd
number_of_pixels = 512, 512
pixel_pitch = 100um, 50um
position = 0mm, 0mm, 282.5mm
orientation = 0deg, 0deg, 0deg
spatial_resolution = 29um,14.5um
material_budget = 0.0032021081576535286
time_resolution = 10000s
|
|
139
|
Mon Aug 26 09:18:25 2024 |
RD50 Generic User | geo | | | | | | | | | | | | | new geo file with adjusted dut position |
| Attachment 1: detectors_new.geo
|
[TLU_0]
role = auxiliary
type = tlu
number_of_pixels = 0, 0
pixel_pitch = 0um, 0um
position = 0mm, 0mm, 5m
orientation = 0deg, 0deg, 0deg
time_resolution = 0ns
[dssd_5_1_1]
type = dssd
number_of_pixels = 512, 512
pixel_pitch = 100um, 50um
position = 0mm, 0mm, 0mm
orientation = 0deg, 0deg, 0deg
spatial_resolution = 29um,14.5um
material_budget = 0.0032021081576535286
time_resolution = 10000s
[dssd_5_1_2]
type = dssd
number_of_pixels = 512, 512
pixel_pitch = 100um, 50um
position = 0mm, 0mm, 50mm
orientation = 0deg, 0deg, 0deg
spatial_resolution = 29um,14.5um
material_budget = 0.0032021081576535286
time_resolution = 10000s
role = reference
[RD50_MPWx_1]
#mask_file = mask_maus.txt
role = auxiliary
#role = dut
type = RD50_MPWx
number_of_pixels = 64, 64
pixel_pitch = 62um, 62um
position = 0mm, 0mm, 85mm
orientation = 90deg,0deg,180deg
orientation_mode = "zyx"
time_resolution = 25ns
material_budget = 0.00320305
[RD50_MPWx_0]
#mask_file = mask_maus.txt
role = dut
type = RD50_MPWx
number_of_pixels = 64, 64
pixel_pitch = 62um, 62um
position = 0mm, 0mm, 117mm
orientation = 90deg,0deg,180deg
orientation_mode = "zyx"
time_resolution = 25ns
material_budget = 0.00320305
[dssd_5_1_3]
type = dssd
number_of_pixels = 512, 512
pixel_pitch = 100um, 50um
position = 0mm, 0mm, 240mm
orientation = 0deg, 0deg, 0deg
spatial_resolution = 29um,14.5um
material_budget = 0.0032021081576535286
time_resolution = 10000s
#role = reference
[dssd_5_1_4]
type = dssd
number_of_pixels = 512, 512
pixel_pitch = 100um, 50um
position = 0mm, 0mm, 289mm
orientation = 0deg, 0deg, 0deg
spatial_resolution = 29um,14.5um
material_budget = 0.0032021081576535286
time_resolution = 10000s
|
|
154
|
Sat Dec 14 13:02:29 2024 |
Felix Ulrich-Pur | Shift 23.11.24 low flux Carbon test with RaMon (did not work) | 15 | RaMon | | Low Flux High | Carbon | Crap | 06:55 | 07:01 | 6 | | | | Low flux carbon did not work
1µs EFE, 30s Extraction, Deg100
we tried different energies (402.MeV/u)-> 120 MeV/u, but unfortunately we did not get any beam |
|
155
|
Sat Dec 14 13:04:57 2024 |
Felix Ulrich-Pur | Shift 23.11.24 low flux Carbon test with RaMon (did not work) | 16 | RaMon | | Low Flux High | Carbon | Crap | 07:02 | 07:20 | 18 | | | | Low flux carbon did not work
5µs EFE, 10s Extraction, Deg100
we tried different energies (402.MeV/u)-> 238 MeV/u, but unfortunately we did not get any beam |
|