 Sun Nov 7 19:06:40 2021, Felix Ulrich-Pur, Peakfinder WET meas 7.11.21, 19, , 175.3, nominal, , , Good, , , 10, , , , none,
|
Start: 11:00
WET measurement of PMMA slabs also used for TOF-CT (GSI)
4cm PMMA
"Accumalte Charge"
PMMA was activated. Had to wait ~10-15min after measurement |
|
Sun Nov 7 19:06:26 2021, Felix Ulrich-Pur, Peakfinder WET meas 7.11.21, 18, , 175.3, nominal, , , Good, , , 10, , , , none,
|
Start: 10:30
WET measurement of PMMA slabs also used for TOF-CT (GSI)
3cm PMMA
"Accumalte Charge"
PMMA was activated. Had to wait ~10-15min after measurement |
|
Sun Nov 7 19:06:06 2021, Felix Ulrich-Pur, Peakfinder WET meas 7.11.21, 17, , 175.3, nominal, , , Good, , , 10, , , , none,
|
Start: 10:06
WET measurement of PMMA slabs also used for TOF-CT (GSI)
2cm PMMA
"Accumalte Charge"
PMMA was activated. Had to wait ~10-15min after measurement |
|
Sun Nov 7 19:05:15 2021, Felix Ulrich-Pur, Peakfinder WET meas 7.11.21, 16, , 175.3, nominal, , , Good, , , 10, , , , none,
|
Start: 09:38
WET measurement of PMMA slabs also used for TOF-CT (GSI)
1cm PMMA
"Accumalte Charge"
PMMA was activated. Had to wait ~10-15min after measurement |
|
Sun Nov 7 19:04:10 2021, Felix Ulrich-Pur, Peakfinder WET meas 7.11.21, 15, , 175.3, nominal, , , Good, , , 10, , , , none,
|
Start: 09:14
WET measurement of PMMA slabs also used for TOF-CT (GSI)
reference run
"Accumalte Charge" |
|
Sun Nov 7 19:02:25 2021, Felix Ulrich-Pur, Peakfinder WET meas 7.11.21, 14, , 175.3, nominal, , , Good, , , 10, , , , none,
|
Start: 08:55
WET measurement of PMMA slabs also used for TOF-CT (GSI)
reference run (with Arduino Spill Start/Stop logic)
fringes in Bragg peak (trigger not optimal (maybe too much latency with Arduino))--> next measurement with "Accumalte Charge" instead of "Spill Start/Stop" |
|
Sun Nov 7 19:00:54 2021, Felix Ulrich-Pur, Peakfinder WET meas 7.11.21, 13, , 175.3, nominal, , , Good, , , 10, , , , none,
|
Start: 08:30
WET measurement of PMMA slabs also used for TOF-CT (GSI)
coarse run (to find Bragg range |
|
Sun Nov 7 19:00:36 2021, Felix Ulrich-Pur, Low flux test 7.11.21, 12, , 62.4, III(EFE+SID2), , 30 spills, Good, , , , , , , none,
|
Start: 07:44 O(kHz) |
|
Sun Nov 7 19:00:20 2021, Felix Ulrich-Pur, Low flux test 7.11.21, 11, , 145.4, III(EFE+SID2), , 30 spills, Good, , , , , , , none,
|
Start: 07:39 O(kHz) |
|
Sun Nov 7 18:59:43 2021, Felix Ulrich-Pur, Low flux test 7.11.21, 10, , 252.7, III(EFE+SID2), , 30 spills, Good, , , , , , , none,
|
Start: 07:33 O(kHz) |
|
Sun Nov 7 18:59:28 2021, Felix Ulrich-Pur, Low flux test 7.11.21, 9, , 62.4, II(BETA+EFE), , 30 spills, Good, , , , , , , none,
|
Start: 07:26 O(100kHz) |
|
Sun Nov 7 18:59:12 2021, Felix Ulrich-Pur, Low flux test 7.11.21, 8, , 145.4, II(BETA+EFE), , 30 spills, Good, , , , , , , none,
|
Start: 07:20 O(100kHz) |
|
Sun Nov 7 18:57:03 2021, Felix Ulrich-Pur, Low flux test 7.11.21, 7, , 252.7, II(BETA+EFE), , 30 spills, Good, , , , , , , none,
|
Start: 07:13 O(100kHz) |
|
Sun Nov 7 18:55:52 2021, Felix Ulrich-Pur, Low flux test 7.11.21, 6, , 62.4, I(EFE+SID0), , 30 spills, Good, , , , , , , none,
|
Start: 07:07 O(MHz) |
|
Sun Nov 7 18:53:46 2021, Felix Ulrich-Pur, Low flux test 7.11.21, 5, , 145.4, I(EFE+SID0), , 30 spills, Good, , , , , , , none,
|
Start: 07:01 O(MHz) |
|
Sun Nov 7 18:52:55 2021, Felix Ulrich-Pur, Low flux test 7.11.21, 4, , 252.7, I(EFE+SID0), , 30 spills, Good, , , , , , , none,
|
Start: 06:54 O(MHz) |
|
Sun Nov 7 18:52:29 2021, Felix Ulrich-Pur, Low flux test 7.11.21, 3, , 800, VII, , 30 spills, Good, , , , , , , none,
|
Start: 06:46 O(MHz) |
|
Sun Nov 7 18:52:10 2021, Felix Ulrich-Pur, Low flux test 7.11.21, 2, , 800, V, , 30 spills, Good, , , , , , , none,
|
Start: 06:40 O(100kHz) |
|
Sun Nov 7 18:50:31 2021, Felix Ulrich-Pur, Low flux test 7.11.21, 1, , 800, VI, , 30 spills, Good, , , , , , , none,
|
Start: 06:33 O(kHz) |
|
Thu Oct 7 11:13:46 2021, Philipp Gaggl, Pad Sensoren, 38, SiC+Si, , , , , Unknown, , , , , , , ,
|
beamtime on 18.09.2021
CH1: SiC
CH3: Si
Bias_Si: -100 V
Bias_SiC: 1100 V
Noise measurement |
|