| ID |
Date |
Author |
Subject |
Run Number |
DUT |
Beam Energy |
Rate Setting |
Particle Type |
Events |
Data |
Beam Betatron |
Beam Chopper |
Beam Degrader |
Beam EFE |
Beam Orb |
Beam QuadScan |
PhantomType |
PhantomAngle |
|
306
|
Sat Dec 11 17:46:17 2021 |
Felix Ulrich-Pur | Alignment run | 1 | DSSD-Tracker | 800 | V | Proton | | Good | | | | | | | none | |
Fluence loss measurement 11.12.2021
Start 14:45
|
|
307
|
Sat Dec 11 17:47:45 2021 |
Felix Ulrich-Pur | Alignment run | 2 | DSSD-Tracker | 800 | V | Proton | | Good | | | | | | | none | |
Fluence loss measurement 11.12.2021
|
|
308
|
Sat Dec 11 17:47:52 2021 |
Felix Ulrich-Pur | Alignment run | 3 | DSSD-Tracker | 800 | V | Proton | | Good | | | | | | | none | |
Fluence loss measurement 11.12.2021
|
|
309
|
Sat Dec 11 17:48:08 2021 |
Felix Ulrich-Pur | Fluence loss 1cm | 4 | DSSD-Tracker | 800 | V | Proton | | Good | | | | | | | Alu | 0 deg |
Fluence loss measurement 11.12.2021
Start 15:15
0deg =1cm Alu |
|
310
|
Sat Dec 11 18:19:56 2021 |
Felix Ulrich-Pur | Fluence loss 1cm | 5 | DSSD-Tracker | 800 | V | Proton | | Good | | | | | | | Alu | 0 deg |
Fluence loss measurement 11.12.2021
Start 18:17
90deg = all five steps Alu |
|
76
|
Sat Feb 27 09:26:27 2021 |
Felix Ulrich-Pur | Rate verification | 1 | SiC+Si+RaMon | 62.4 | III(EFE+SID2) | | | Unknown | | | | | | | | |
Start 06:37
rate looks okish. few emtpy spills
2021-02-27, 06:07:
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.475V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.112V channel 1, 0-Level: 2.315V channel 1
position:
x: 0
y: 0
2021-02-27, 06:30:
Referenz: 2.477V channel 1
channel 2 unverändert
2021-02-27, 06:37:
Setting: 3
Run 1: 6:37 62.4 MeV, Rate geringer als erwartet
|
|
77
|
Sat Feb 27 09:28:07 2021 |
Felix Ulrich-Pur | Rate verification | 2 | SiC+Si+RaMon | 252.7 | III(EFE+SID2) | | | Crap | | | | | | | | |
Start 06:47
rate only 10Hz, stopped run, room request and rewired trigger.
NOTE: Problem was caused by operators: Optics were not set correctly after ramping up energy from 62.4 to 252.7, not trigger cable
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.475V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x: 0
y: 0 |
|
78
|
Sat Feb 27 09:29:41 2021 |
Felix Ulrich-Pur | Rate verification | 4 | SiC+Si+RaMon | 252.7 | III(EFE+SID2) | | | Good | | | | | | | | |
Start 06:55
reallocated correctly, rate looks similar to old measurements now (kHz ish)
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.475V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x: 0
y: 0 |
|
79
|
Sat Feb 27 09:30:32 2021 |
Felix Ulrich-Pur | Rate verification | 5 | SiC+Si+RaMon | 62.4 | III(EFE+SID2) | | | Good | | | | | | | | |
Start 07:03
verified if run 1 was reliable-->Same results
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.475V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x: 0
y: 0 |
|
87
|
Sat Feb 27 18:42:13 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 13 | SiC+Si+RaMon | 252.7 | III(EFE+SID2) | | | Good | | | | | | | | |
Start 10:38
no signal in SiC
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.100 V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68 |
|
88
|
Sat Feb 27 18:43:12 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 14 | SiC+Si+RaMon | 145.4 | III(EFE+SID2) | | | Good | | | | | | | | |
Start 10:47
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.100 V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68 |
|
89
|
Sat Feb 27 18:43:35 2021 |
Felix Ulrich-Pur | Waveforms SiC+Si | 15 | SiC+Si+RaMon | 100.4 | III(EFE+SID2) | | | Good | | | | | | | | |
Start 11:09
channel 1 : Si upstream
channel 2: SiC downstream
400 V Bias
Referenz: 2.100 V channel 2, 0-Level: 2.310V channel 2
Referenz: 2.477V channel 1, 0-Level: 2.315V channel 1
position:
x = 8
y = 68 |
|
146
|
Tue Mar 16 14:51:53 2021 |
Patrick Sieberer | Pad Sensoren | 1 | | 62.4 | III(EFE+SID2) | Proton | | Unknown | | | | | | | none | |
Start: 06:38
Range Shifter Out, Filter 1 IN, Filter 2 IN
Scintillators in front |
|
147
|
Tue Mar 16 14:54:07 2021 |
Patrick Sieberer | Pad Sensoren | 2 | | 145.4 | III(EFE+SID2) | Proton | | Good | | | | | | | none | |
Start: 06:45
Range Shifter Out, Filter 1 IN, Filter 2 IN
Scintillators in front |
|
148
|
Tue Mar 16 14:54:40 2021 |
Patrick Sieberer | Pad Sensoren | 3 | | 252.7 | III(EFE+SID2) | Proton | | Good | | | | | | | none | |
Start: 07:00
Range Shifter Out, Filter 1 IN, Filter 2 IN
Scintillators in front |
|
149
|
Tue Mar 16 14:55:06 2021 |
Patrick Sieberer | Pad Sensoren | 4 | | 252.7 | III(EFE+SID2) | Proton | | Good | | | | | | | none | |
Start: 07:30
Range Shifter Out, Filter 1 IN, Filter 2 IN
Before the run we went inside to: put scintillators behind the sensors, reset the fpga counters |
|
150
|
Tue Mar 16 14:55:52 2021 |
Patrick Sieberer | Pad Sensoren | 5 | | 194.3 | III(EFE+SID2) | Proton | | Good | | | | | | | none | |
Start: 07:38
Range Shifter Out, Filter 1 IN, Filter 2 IN
Scintillators in front
|
|
151
|
Tue Mar 16 14:56:22 2021 |
Patrick Sieberer | Pad Sensoren | 6 | | 145.4 | III(EFE+SID2) | Proton | | Good | | | | | | | none | |
Start: 07:42
Range Shifter Out, Filter 1 IN, Filter 2 IN |
|
152
|
Tue Mar 16 14:57:21 2021 |
Patrick Sieberer | Pad Sensoren | 7 | | 62.4 | III(EFE+SID2) | Proton | | Good | | | | | | | none | |
Start: 07:54
Range Shifter Out, Filter 1 IN, Filter 2 IN |
|
166
|
Tue Mar 16 15:07:56 2021 |
Patrick Sieberer | Pad Sensoren | 21 | | 100.4 | III(EFE+SID2) | Proton | | Good | | | | | | | none | |
Start: 12:41
Range Shifter Out, Filter 1 IN, Filter 2 IN
12:53 went inside to test if sensors are activated |