| ID |
Date |
Author |
Subject |
Run Number |
DUT |
Beam Energy |
Beam Betatron |
Beam Chopper |
Beam Degrader |
Beam EFE |
Beam Orb |
Beam QuadScan |
PhantomType |
PhantomAngle |
Events |
Data |
|
287
|
Sun Dec 6 16:32:54 2020 |
Christian Irmler | MPW2 | 206 | W13_04 | 252.7 | | | | 1 | | SID0 | | HV = 80V | 10 spills | |
pixel scan, starting with r1 c6
stopped after r3 c2
stopped due to time difference of ~10s between TLU and Caribou |
|
288
|
Sun Dec 6 16:53:35 2020 |
Christian Irmler | MPW2 | 207 | W13_04 | 252.7 | | | | 1 | | SID0 | | HV = 80V | 10 spills | |
pixel scan, starting with r3 c3
tried to syncronized clocks of Caribou and TLU syncronized before run started.
clock of caribou is still 3s ahead. --> need to use ntp server next time.
was interrupted between spill 64 an 65 for about 40 minutes due to MAPTA error (HL-tank error)
stopped after r7 c7 |
|
289
|
Sun Dec 6 18:59:48 2020 |
Christian Irmler | MPW2 | 208 | W13_04 | 252.7 | | | | 1 | | SID0 | | HV = 80V | 10 spills | |
single pixel r0 c2
shutter time set to 2.5s (half of previous value) |
|
290
|
Sun Dec 6 19:07:20 2020 |
Christian Irmler | MPW2 | 209 | W13_04 | 252.7 | | | | 1 | | SID0 | | HV = 80V | 10 spills | |
single pixel r0 c2
shutter time set to 6s |
|
291
|
Sun Dec 6 19:29:57 2020 |
Christian Irmler | MPW2 | 210 | W13_04 | 252.7 | 1 | | | 1 | | | | HV = 80V | 10 spills | |
single pixel r0 c2
test run for new beam settings |
|
292
|
Sun Dec 6 19:30:38 2020 |
Christian Irmler | MPW2 | 211 | W13_04 | 252.7 | 1 | | | 1 | | | | HV = 80V | 10 spills | |
pixle scan, starting with r0 c0
stopped after r0 c6 due network error (oscilloscope connected)
beam rate ~400k
hit rate MPW2: ~400 hits per spill |
|
293
|
Sun Dec 6 19:51:49 2020 |
Christian Irmler | MPW2 | 212 | W13_04 | 252.7 | 1 | | | 1 | | | | HV = 80V | 10 spills | Crap |
pixel scan, starting with r0 c7
stopped due to broken pipe
Caribou rebooted |
294
|
Sun Dec 6 20:04:27 2020 |
Christian Irmler | MPW2 | 213 | W13_04 | 252.7 | 1 | | | 1 | | | | HV = 80V | 10 spills | |
pixel scan, starting with r0 c7
|
|
194
|
Sat Oct 10 18:33:20 2020 |
Manuel Christanell | 2020-10-10 | 40 | Drehtisch | 100.4 | 1 | | | 1 | | | Alu | 298.8 | 1.000.000 | |
Start 18:25; PCT phase; No internet in guest WLAN |
|
270
|
Sat Nov 21 20:09:13 2020 |
Patrick Sieberer | 2020-11-21 | 41 | Diamond + DSSD tracker | 800 | 10 | 60 | 20 | 10 | | | none | | - | |
inverse bias, local run |
|
Draft
|
Fri May 8 15:17:39 2020 |
Felix Ulrich-Pur | | | DSSD-Tracker | Noise | | | | | | | | | | |
|
|
2
|
Sun May 10 13:43:49 2020 |
Christian Irmler | setup | 1 | Diamond + DSSD tracker | | | | | | | | none | | | |
|
|
3
|
Sun May 10 14:51:12 2020 |
Christian Irmler | Calibration Runs | 1 | Diamond + DSSD tracker | Noise | | | | | | | none | | | |
ADC delay, FIR, ped, noise,cal with DSSD tracker + diamond
DSSD HV= +/- 50V
Dia HV = +/- 250V
diamond not yet pumped
calibration files: pct_dia_01_silimond_tb_01-000001.xml |
|
6
|
Sun May 10 16:44:46 2020 |
Christian Irmler | Calibration Diamond 500V | 3 | Diamond | 252.7 | none | none | | | | | none | | | |
diamond only
Dia HV = +/- 250V
ADC, FIR, ped, noise, cal |
|
7
|
Sun May 10 16:47:10 2020 |
Christian Irmler | Calibration Diamond 600V | 4 | Diamond | 252.7 | none | none | | | | | none | | | |
diamond only
Dia HV = +/- 300V
ADC, FIR, ped, noise, cal |
|
9
|
Sun May 10 17:01:42 2020 |
Christian Irmler | Calibration Diamond + pCT-6 600V | 6 | Diamond + DSSD-pCT6 | 252.7 | none | none | | | | | none | | | |
pCT-6 + diamond
DSSD HV = +/-50V
Dia HV = +/- 300V
ADC, FIR, ped, noise, cal |
|
10
|
Sun May 10 17:14:00 2020 |
Christian Irmler | Calibration Diamond + pCT-6 300V | 7 | Diamond + DSSD-pCT6 | 252.7 | none | none | | | | | none | | | |
pCT-6 + diamond
DSSD HV = +/-50V
Dia HV = +/- 150V
ADC, FIR, ped, noise, cal |
|
11
|
Sun May 10 17:16:58 2020 |
Christian Irmler | Calibration Diamond 300V | 8 | Diamond | 252.7 | none | none | | | | | none | | | |
Diamond only
Dia HV = +/- 150V
ADC, FIR, ped, noise, cal |
|
12
|
Sun May 10 17:21:28 2020 |
Felix Ulrich-Pur | Calibration Diamond 400V | 9 | Diamond | 252.7 | none | none | | | | | none | | | |
Diamond only
Dia HV = +/- 200V
ADC, FIR, ped, noise, cal |
|
13
|
Sun May 10 17:38:55 2020 |
Felix Ulrich-Pur | Calibration Diamond+pCT6 400V | 10 | Diamond + DSSD-pCT6 | 252.7 | none | none | | | | | none | | | |
Diamond+pCT6
Dia HV = +/- 200V
ADC, FIR, ped, noise, cal |