 Sun Dec 6 20:04:27 2020, Christian Irmler, MPW2, 213, W13_04, 252.7, 1, , , 1, , , , HV = 80V, 10 spills,
|
pixel scan, starting with r0 c7
|
|
Sun Dec 6 19:51:49 2020, Christian Irmler, MPW2, 212, W13_04, 252.7, 1, , , 1, , , , HV = 80V, 10 spills, Crap
|
pixel scan, starting with r0 c7
stopped due to broken pipe
Caribou rebooted |
|
Sun Dec 6 19:30:38 2020, Christian Irmler, MPW2, 211, W13_04, 252.7, 1, , , 1, , , , HV = 80V, 10 spills,
|
pixle scan, starting with r0 c0
stopped after r0 c6 due network error (oscilloscope connected)
beam rate ~400k
hit rate MPW2: ~400 hits per spill |
|
Sun Dec 6 19:29:57 2020, Christian Irmler, MPW2, 210, W13_04, 252.7, 1, , , 1, , , , HV = 80V, 10 spills,
|
single pixel r0 c2
test run for new beam settings |
|
Sun Dec 6 19:07:20 2020, Christian Irmler, MPW2, 209, W13_04, 252.7, , , , 1, , SID0, , HV = 80V, 10 spills,
|
single pixel r0 c2
shutter time set to 6s |
|
Sun Dec 6 18:59:48 2020, Christian Irmler, MPW2, 208, W13_04, 252.7, , , , 1, , SID0, , HV = 80V, 10 spills,
|
single pixel r0 c2
shutter time set to 2.5s (half of previous value) |
|
Sun Dec 6 16:53:35 2020, Christian Irmler, MPW2, 207, W13_04, 252.7, , , , 1, , SID0, , HV = 80V, 10 spills,
|
pixel scan, starting with r3 c3
tried to syncronized clocks of Caribou and TLU syncronized before run started.
clock of caribou is still 3s ahead. --> need to use ntp server next time.
was interrupted between spill 64 an 65 for about 40 minutes due to MAPTA error (HL-tank error)
stopped after r7 c7 |
|
Sun Dec 6 16:32:54 2020, Christian Irmler, MPW2, 206, W13_04, 252.7, , , , 1, , SID0, , HV = 80V, 10 spills,
|
pixel scan, starting with r1 c6
stopped after r3 c2
stopped due to time difference of ~10s between TLU and Caribou |
|
Sun Dec 6 16:01:02 2020, Christian Irmler, MPW2, 205, W13_04, 252.7, , , , 1, , SID0, , HV = 80V, 10 spills,
|
pixel scan, starting with r0 c0
stopped after r1 c5 due to synch issues |
|
Sun Dec 6 15:57:28 2020, Christian Irmler, MPW2, 204, W13_04, 252.7, , , , 1, , SID0, , HV = 20V, 10 spills,
|
r0 c2 |
|
Sun Dec 6 15:55:13 2020, Christian Irmler, MPW2, 203, W13_04, 252.7, , , , 1, , SID0, , HV = 1V, 10 spills,
|
r0 c2
lowest Voltage, which could be set with SMU outputs on. |
|
Sun Dec 6 15:53:12 2020, Christian Irmler, MPW2, 202, W13_04, 252.7, , , , 1, , SID0, , HV off, 10 spills,
|
r0 c2
HV set to 0V, but KeithRC SW turned SMU output off |
|
Sun Dec 6 15:45:45 2020, Christian Irmler, MPW2, 201, W13_04, 252.7, , , , 1, , SID0, , HV = 100V, 10 spills,
|
r0 c2 |
|
Sun Dec 6 15:44:51 2020, Christian Irmler, MPW2, 200, W13_04, 252.7, , , , 1, , SID0, , HV = during ramping, 10 spills, Crap
|
HV =
r0 c2 |
|
Sun Dec 6 15:41:31 2020, Christian Irmler, MPW2, 199, W13_04, 252.7, , , , 1, , SID0, , HV = 40V, 10 spills,
|
HV = 40V
r0 c2 |
|
Sun Dec 6 15:38:59 2020, Christian Irmler, MPW2, 198, W13_04, 252.7, , , , 1, , SID0, , HV = 60V, 10 spills,
|
HV = 60V
r0 c2 |
|
Sun Dec 6 15:37:05 2020, Christian Irmler, MPW2, 197, W13_04, 252.7, , , , 1, , SID0, , HV = 80V, 10 spills,
|
HV = 80V
r0 c2 |
|
Sun Dec 6 13:59:35 2020, Christian Irmler, MPW2, 196, W13_04, 252.7, , , , 1, , SID0, , , ,
|
Testrun to check number of hits per splill --> ~5k hits per spill |
Sun Dec 6 12:52:17 2020, Christian Irmler, MPW2 setup and configuration, , , , , , , , , , , , , 
|
First testbeam with MPW2, Setup as depicted in attachment 1,
Default beam setting EFE/SID0 252 MeV, released setting
TRIMDAC config from Friday: trimconfig_W13_04_80V_06_12_13_00 - New trimdac run taken on Sunday!
|
|
Sat Nov 21 21:30:16 2020, Patrick Sieberer, 2020-11-21, 45, Diamond + DSSD tracker, 800, 10, 60, 20, 10, , , none, , 3900000, Unknown
|
tracking, (with switched APV channels)
Due to invers bias, p- and n-side of diamond are also flipped! |
|