Settings 

Trigger: Coincidence using Scintillators

timing setting 41 (*32ns)

using 16ns cables from our scintialltors to TLU

Big Line: DSSD
Small Line: Malta
Small Square: Phantom
Small Rectangle: Trigger Scintillator
Big Rectangle: TERA

Beam is coming in from Left to Right

Notes of the planned order of modules within beam (and reserve modules), before switching out the first one

Spot Sizes Table: SpotsForBeamSettings.csv

Empirics, such as P2, P25, Median, P75 and P98 were obtained directly from the data. These may not be accurate if the beam is larger than the sensor.

To better describe these cases, fit values were obtained with a curve fit to a normal distribution. This can also be inaccurate, as many beam settings aren't normal and the automatic fit might have failed. A goodness-of-fit will be added to each row in the distant future

Spot sizes table: SpotsForBeamSettings.csv

Empirics, such as P2, P25, Median, P75 and P98 were obtained directly from the data. These may not be accurate if the beam is larger than the sensor.

To better describe these cases, fit values were obtained with a curve fit to a normal distribution. This can also be inaccurate, as many beam settings aren't normal and the automatic fit might have failed. A goodness-of-fit will be added to each row in the distant future

Setup 1 (on 20.10.2019):

• With Cividec

• Position: beam center, ch3 (diode 1) in front, ch4 (diode 3) in the rear

• RMS: ca. 23 mV, 24 mV

• Trigger on Ch3: ca. 250 mV

• Osci amplitude/div: 200 mV or 800 MeV, 400 mV for lower energies

Setup 2 (on 20.10.2019):

• Same as setup 1 but 1 cm to the top from beam center

Setup 3 (on 25.10.2019):

• Same as setup 1 but with Osci amplitude/div: 1V

Setup 4 (on 25.10.2019):

• No Cividec

• Postion: Same as setup 1

• RMS: ca. 0.3 mV, 0.3 mV

• Trigger: 3 mV

• Osci amplitude/div: 10 mV

Sketch of the setup for experiment 3, proton CT