Fri Oct 25 18:56:11 2019, Alexander Burker, 2019-07-13f proton CT, Sketch, , , , , none,
|
Spot sizes table: SpotsForBeamSettings.csv
Empirics, such as P2, P25, Median, P75 and P98 were obtained directly from the data. These may not be accurate if the beam is larger than the
sensor. |
Fri Jan 24 09:33:12 2020, Alexander Burker, 2019-07-13f MaltaPix, MALTA, 800, EFE 1us , Degrader20, changed gain orb, no betatron, chopper 60, 1017, , none,
|
Corresponds to DSSD tracker Run 8 (https://elog.hephy.at/testbeam-MA2019/10)
Trigger: Coincidence using Scintillators |
Fri Jan 24 09:39:08 2020, Alexander Burker, 2019-07-13f MaltaPix, MALTA, 145.4, EFE, QuadScan SID2, 1018, , Alu, 0
|
Corresponds to DSSD tracker Run 9 (https://elog.hephy.at/testbeam-MA2019/11)
Trigger: Coincidence using Scintillators |
Fri Jan 24 09:40:11 2020, Alexander Burker, 2019-07-13f MaltaPix, MALTA, 145.4, EFE, QuadScan SID2, 1019, , Alu, 20
|
Corresponds to DSSD tracker Run 10 (https://elog.hephy.at/testbeam-MA2019/14)
Trigger: Coincidence using Scintillators |
Fri Jan 24 09:42:59 2020, Alexander Burker, 2019-07-13f MaltaPix, MALTA, 145.4, EFE, QuadScan SID2, 1020, , Alu, 20
|
Corresponds to DSSD tracker Run 11 (https://elog.hephy.at/testbeam-MA2019/15)
Trigger: Coincidence using Scintillators |
Fri Jan 24 09:44:49 2020, Alexander Burker, 2019-07-13f MaltaPix, MALTA, 145.4, EFE, QuadScan SID2, 1022, , Alu, 20
|
Corresponds to DSSD tracker Run 12 (https://elog.hephy.at/testbeam-MA2019/17)
Trigger: Coincidence using Scintillators |
Fri Jan 24 09:45:52 2020, Alexander Burker, 2019-07-13f MaltaPix, MALTA, 145.4, EFE, QuadScan SID2, 1023, , Alu, 40
|
Corresponds to DSSD tracker Run 13 (https://elog.hephy.at/testbeam-MA2019/18)
Trigger: Coincidence using Scintillators |
Tue Oct 29 14:13:20 2019, Alexander Burker, 2019-10-25 Low Flux, , , , 3, 6656, none,
|
|
Sat Jul 13 12:14:55 2019, Thomas Bergauer, , Drehtisch, , , , , ,
|
Settings |
Sat Jul 13 13:34:40 2019, Thomas Bergauer, , DSSD-Tracker, 800, EFE_quad2, 2, , none, alignment run
|
|
Sat Jul 13 20:17:38 2019, Felix Ulrich-Pur, , TERA-Cal, 800, , , , none,
|
Calibrated Voltage settings
P Voltage: 69V
Q Voltage: 76,8V |
Tue Sep 24 11:12:45 2019, Alexander Burker, , Sketch, , , , , ,
|
Notes of the planned order of modules within beam (and reserve modules), before switching out the first one |
|