Home CMS Production Clean room MedAustron HEPHY testbeams old
testbeam-MA2018 testbeam-MA2019 testbeam-MA2020 testbeam-MA2021 testbeam-MA2023 testbeam-MA2024
  MedAustron 2019, Page 6 of 7  Not logged in ELOG logo
 Find |  Login |  Help 
 Full | Summary | Threaded | Show attachments  Show only new entries    132 Entries 
Goto page Previous  1, 2, 3 ... 5, 6, 7   Next  All
ID Date Author Subject DUT Beam Energy Beam Setting Run Number Eventsdown PhantomType PhantomAngle
  49   Fri Oct 25 18:23:05 2019 Alexander Burker2019-10-20 Low Flux 800EFE 1us, Degrader20, Betatron50, No Chopper3 none 

06:50 - no beam

06:55 - accelerator fail, still no beam

07:07 - no beam with gain 6

 

  60   Fri Oct 25 18:34:26 2019 Alexander Burker2019-10-20 Low Flux 145.4EFE, QuadScan SID214 none 

10:00
scinti0 threshold 25 instead of 20, noise better

  61   Fri Oct 25 18:34:34 2019 Alexander Burker2019-10-20 Low Flux 145.4EFE, QuadScan SID215 none 

10:03
scinti0 threshold 30 instead of 20, signal same for both scintis, noise didnt change rate much, other scinti was stable at 20mV threshold
 

  76   Fri Oct 25 18:50:08 2019 Alexander Burker2019-10-20 Low FluxSketch      

Spot Sizes Table: SpotsForBeamSettings.csv

Empirics, such as P2, P25, Median, P75 and P98 were obtained directly from the data. These may not be accurate if the beam is larger than the sensor.

To better describe these cases, fit values were obtained with a curve fit to a normal distribution. This can also be inaccurate, as many beam settings aren't normal and the automatic fit might have failed. A goodness-of-fit will be added to each row in the distant future

  77   Fri Oct 25 18:56:11 2019 Alexander Burker2019-07-13f proton CTSketch    none 

Spot sizes table: SpotsForBeamSettings.csv

Empirics, such as P2, P25, Median, P75 and P98 were obtained directly from the data. These may not be accurate if the beam is larger than the sensor.

To better describe these cases, fit values were obtained with a curve fit to a normal distribution. This can also be inaccurate, as many beam settings aren't normal and the automatic fit might have failed. A goodness-of-fit will be added to each row in the distant future

  83   Sat Oct 26 01:31:59 2019 Alexander Burker2019-10-25 Low Flux 252.7EFE 1, QuadScan SID 1, Degrader 10, Betatron 108 none 

  100   Tue Nov 5 10:50:08 2019 Florian PittersLGAD Setups on 20. and 25.10. ShiftLGAD      

Setup 1 (on 20.10.2019):

  • With Cividec

  • Position: beam center, ch3 (diode 1) in front, ch4 (diode 3) in the rear

  • RMS: ca. 23 mV, 24 mV

  • Trigger on Ch3: ca. 250 mV

  • Osci amplitude/div: 200 mV or 800 MeV, 400 mV for lower energies

 

Setup 2 (on 20.10.2019):

  • Same as setup 1 but 1 cm to the top from beam center

 

Setup 3 (on 25.10.2019):

  • Same as setup 1 but with Osci amplitude/div: 1V

 

Setup 4 (on 25.10.2019):

  • No Cividec

  • Postion: Same as setup 1

  • RMS: ca. 0.3 mV, 0.3 mV

  • Trigger: 3 mV

  • Osci amplitude/div: 10 mV

  101   Fri Nov 22 10:52:45 2019 Alexander Burker2019-11-23f proton CTSketch pCT Setup    

Sketch of the setup for experiment 3, proton CT

  102   Tue Nov 26 13:09:18 2019 Alexander Burker2019-11-23f proton CTDSSD-Tracker252.7 13 none 

2019-11-23 21:30

TLU (Rack-mounted) failed: "netzwerk error"

  103   Tue Nov 26 13:13:43 2019 Alexander Burker2019-11-23f proton CTDSSD-Tracker252.7 14 none 

2019-11-23 21:31

TLU (Rack-mounted) failed: "netzwerk error"

  104   Tue Nov 26 13:14:03 2019 Alexander Burker2019-11-23f proton CTDSSD-Tracker252.7 15 none 

2019-11-23 21:32

TLU (Rack-mounted) failed: "netzwerk error"

  105   Tue Nov 26 13:14:18 2019 Alexander Burker2019-11-23f proton CTDSSD-Tracker252.7 16 none 

2019-11-23 21:33

TLU (Rack-mounted) failed: "netzwerk error"

  106   Tue Nov 26 13:14:40 2019 Alexander Burker2019-11-23f proton CTDSSD-Tracker252.7 17 none 

2019-11-23 21:46

TLU (Rack-mounted) failed: "netzwerk error" (even after a power cycle)

  107   Tue Nov 26 13:16:21 2019 Alexander Burker2019-11-23f proton CT Noise 24 none 

2019-11-24 13:43

no TLU error was observed

  108   Tue Nov 26 13:17:11 2019 Alexander Burker2019-11-23f proton CTDSSD-Tracker252.7 25 none 

2019-11-24 14:05

promptly aborted due to "missing reason" (maybe Felix has some notes)

  110   Tue Nov 26 13:19:21 2019 Alexander Burker2019-11-23f proton CTDSSD-Tracker252.7 28 none 

2019-11-24 14:24

Latency = 43 (found too late)

TLU (Rack-mounted) failed: "netzwerk error"

  111   Tue Nov 26 13:19:49 2019 Alexander Burker2019-11-23f proton CTDSSD-Tracker252.7 29 none 

2019-11-24 14:26

Latency = 41 (this setting was kept)

TLU (Rack-mounted) failed: "netzwerk error"

  112   Tue Nov 26 13:30:58 2019 Alexander Burker2019-11-23f proton CTDSSD-Tracker252.7 30 none 

2019-11-24 14:30

Random Triggers

TLU (Rack-mounted) failed: "netzwerk error"

  113   Tue Nov 26 13:31:57 2019 Alexander Burker2019-11-23f proton CTDSSD-Tracker252.7 32 none 

2019-11-24 14:40

Coincidences Trigger

TLU (Rack-mounted) failed: "netzwerk error"

  114   Tue Nov 26 13:33:50 2019 Alexander Burker2019-11-23f proton CTDSSD-Tracker252.7 33 none 

2019-11-24 15:08

Standalone TLU

TLU (Rack-mounted) failed: "netzwerk error"

Goto page Previous  1, 2, 3 ... 5, 6, 7   Next  All
ELOG V3.1.5-fc6679b