ELOG testbeam-rd50-desy-Oct2024

Home CMS Production Clean room MedAustron HEPHY testbeams old

testbeam-rd50-desy-Oct2024 testbeam-RD50-DESY-Apr2024 testbeam-RD50-DESY-Jul2023 testbeam-RD50-CERN-Oct2022 testbeam-DESY-Oct2017 testbeam-DESY-April2017 testbeam-SPS2015 testbeam-SPS2014 testbeam-DESY14 testbeam-SPS12 testbeam-SPS11 testbeam-SPS10 testbeam-SPS09 testbeam-SPS08 LP-TPC

Testbeam at DESY in October 2024, Page 2 of 29

Not logged in

Find | Login | Help

New entries since:

Thu Jan 1 01:00:00 1970

Full | Summary | Threaded | Hide attachments

564 Entries

Goto page Previous 1, 2, 3 ... 27, 28, 29 Next

ID	Date	Author	Subject	Run Number	DUT	Biasing	Beam Energy	thr	HV	Data	t-Start	t-Stop	Duration_min
544	Sun Oct 6 14:09:14 2024	tb-crew	HV scan		V W8-0E0	Topside	4.2	1.0	-150	Unknown
TP crashed at this voltage
543	Sun Oct 6 12:58:48 2024	tb-crew	HV scan	503	V W8-0E0	Topside	4.2	1.0	-150	Unknown	06.10.2024 12:49:14	06.10.2024 12:59:17	10
automatic log for run 503 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_13.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -150 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
542	Sun Oct 6 12:48:10 2024	tb-crew	HV scan	502	V W8-0E0	Topside	4.2	1.0	-160	Unknown	06.10.2024 12:38:36	06.10.2024 12:48:39	10
automatic log for run 502 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_12.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -160 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
541	Sun Oct 6 12:37:31 2024	tb-crew	HV scan	501	V W8-0E0	Topside	4.2	1.0	-170	Unknown	06.10.2024 12:27:57	06.10.2024 12:38:00	10
automatic log for run 501 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_11.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -170 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
540	Sun Oct 6 12:26:53 2024	tb-crew	HV scan	500	V W8-0E0	Topside	4.2	1.0	-180	Unknown	06.10.2024 12:17:19	06.10.2024 12:27:22	10
automatic log for run 500 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_10.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -180 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
539	Sun Oct 6 12:16:15 2024	tb-crew	HV scan	499	V W8-0E0	Topside	4.2	1.0	-190	Unknown	06.10.2024 12:06:41	06.10.2024 12:16:44	10
automatic log for run 499 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_9.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -190 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
538	Sun Oct 6 12:05:37 2024	tb-crew	HV scan	498	V W8-0E0	Topside	4.2	1.0	-200	Unknown	06.10.2024 11:56:03	06.10.2024 12:06:06	10
automatic log for run 498 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_8.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -200 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
537	Sun Oct 6 11:54:58 2024	tb-crew	HV scan	497	V W8-0E0	Topside	4.2	1.0	-210	Unknown	06.10.2024 11:45:23	06.10.2024 11:55:27	10
automatic log for run 497 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_7.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -210 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
536	Sun Oct 6 11:44:19 2024	tb-crew	HV scan	496	V W8-0E0	Topside	4.2	1.0	-220	Unknown	06.10.2024 11:34:44	06.10.2024 11:44:48	10
automatic log for run 496 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_6.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -220 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
535	Sun Oct 6 11:33:40 2024	tb-crew	HV scan	495	V W8-0E0	Topside	4.2	1.0	-230	Unknown	06.10.2024 11:24:05	06.10.2024 11:34:09	10
automatic log for run 495 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_5.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -230 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
534	Sun Oct 6 11:23:01 2024	tb-crew	HV scan	494	V W8-0E0	Topside	4.2	1.0	-240	Unknown	06.10.2024 11:13:26	06.10.2024 11:23:30	10
automatic log for run 494 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_4.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -240 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
533	Sun Oct 6 11:12:23 2024	tb-crew	HV scan	493	V W8-0E0	Topside	4.2	1.0	-250	Unknown	06.10.2024 11:02:48	06.10.2024 11:12:52	10
automatic log for run 493 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_3.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -250 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
532	Sun Oct 6 11:01:44 2024	tb-crew	HV scan	492	V W8-0E0	Topside	4.2	1.0	-260	Unknown	06.10.2024 10:52:09	06.10.2024 11:02:13	10
automatic log for run 492 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_2.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -260 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
531	Sun Oct 6 10:51:06 2024	tb-crew	HV scan	491	V W8-0E0	Topside	4.2	1.0	-270	Unknown	06.10.2024 10:41:31	06.10.2024 10:51:35	10
automatic log for run 491 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_1.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -270 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
530	Sun Oct 6 10:40:28 2024	tb-crew	HV scan	490	V W8-0E0	Topside	4.2	1.0	-280	Unknown	06.10.2024 10:30:53	06.10.2024 10:40:57	10
automatic log for run 490 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_0.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -280 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
529	Sun Oct 6 10:29:05 2024	tb-crew		489	V W8-0E0	Topside	4.2	1.0	-280	Unknown	06.10.2024 10:08:30	06.10.2024 10:29:33	21
automatic log for run 489 Comment: full efficiency achived
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: mpw4.conf
[RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER [LogCollector.log] [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 ## TRIGGER CONFIGURATION #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 trigPol=0x0 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask = 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode = 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = "peary_config.cfg, matrix_mpw4_base.txt" start_cmd = "./get_mpw4_configs.sh" [Producer.keithleyPS] voltage = -280 max_current = 300e-6 ramp_step = 2.5 ramp_speed = 200 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] voltage_key = th voltage_value = 1.0 #register_key = vnfb #register_value = 18 [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50
528	Sun Oct 6 10:28:57 2024	tb-crew			V W8-0E0	Topside	4.2	1.0	-280	Unknown
full efficiency achived
527	Sun Oct 6 10:06:40 2024	tb-crew	alignment		V W8-0E0	Topside	4.2	1.0	-280	Unknown
positionX = 55 # DUT measurement position positionY = 11.5 # mm
526	Sun Oct 6 10:04:42 2024	tb-crew	alignment	488	V W8-0E0	Topside	4.2	1.0	-280	Unknown	06.10.2024 10:03:50	06.10.2024 10:05:11	1
automatic log for run 488 Comment: positionX = 57 # DUT measurement position positionY = 11.5 # mm
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: mpw4.conf
[RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER [LogCollector.log] [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 ## TRIGGER CONFIGURATION #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 trigPol=0x0 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask = 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode = 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = "peary_config.cfg, matrix_mpw4_base.txt" start_cmd = "./get_mpw4_configs.sh" [Producer.keithleyPS] voltage = -280 max_current = 300e-6 ramp_step = 2.5 ramp_speed = 200 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] voltage_key = th voltage_value = 1.0 #register_key = vnfb #register_value = 18 [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50
525	Sun Oct 6 09:56:54 2024	tb-crew	HV scan	487	V W8-0E0	Topside	4.2	1.0	-280	Unknown	06.10.2024 09:51:06	06.10.2024 09:57:23	6
automatic log for run 487 Comment: not hitting DUT centered
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: mpw4.conf
[RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER [LogCollector.log] [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 ## TRIGGER CONFIGURATION #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 trigPol=0x0 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask = 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode = 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = "peary_config.cfg, matrix_mpw4_base.txt" start_cmd = "./get_mpw4_configs.sh" [Producer.keithleyPS] voltage = -280 max_current = 300e-6 ramp_step = 2.5 ramp_speed = 200 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] voltage_key = th voltage_value = 1.0 #register_key = vnfb #register_value = 18 [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50

Goto page Previous 1, 2, 3 ... 27, 28, 29 Next

ELOG V3.1.5-fc6679b