ELOG testbeam-rd50-desy-Oct2024

Home CMS Production Clean room MedAustron HEPHY testbeams old

testbeam-rd50-desy-Jul2025 testbeam-rd50-desy-Oct2024 testbeam-RD50-DESY-Apr2024 testbeam-RD50-DESY-Jul2023 testbeam-RD50-CERN-Oct2022 testbeam-DESY-Oct2017 testbeam-DESY-April2017 testbeam-SPS2015 testbeam-SPS2014 testbeam-DESY14 testbeam-SPS12 testbeam-SPS11 testbeam-SPS10 testbeam-SPS09 testbeam-SPS08 LP-TPC

Testbeam at DESY in October 2024, Page 2 of 29

Not logged in

Find | Login | Help

Full | Summary | Threaded | Hide attachments

564 Entries

Goto page Previous 1, 2, 3 ... 27, 28, 29 Next

ID	Date	Author	Subject	Run Number	DUT	Biasing	Beam Energy	thr	HV	scan-val	Data	t-Start	t-Stop	Duration_min
195	Thu Oct 3 16:26:59 2024	tb-crew	std settings	176	V W8-1E15	Topside	4.2	1.10	-190		Unknown	03.10.2024 15:36:43	03.10.2024 16:27:25	50
automatic log for run 176 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 30 1 0 0 0 -1 00 31 1 0 0 0 -1 00 32 1 0 0 0 -1 00 33 1 0 0 0 -1 00 34 1 0 0 0 -1 01 30 1 0 0 0 -1 01 31 1 0 0 0 -1 01 32 1 0 0 0 -1 01 33 1 0 0 0 -1 01 34 1 0 0 0 -1
Attachment 3: mpw4.conf
[RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER [LogCollector.log] [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 ## TRIGGER CONFIGURATION #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 trigPol=0x0 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask = 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode = 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = "peary_config.cfg, matrix_mpw4_base.txt" start_cmd = "./get_mpw4_configs.sh" [Producer.keithleyPS] voltage = -190 max_current = 300e-6 ramp_step = 5 ramp_speed = 100 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] voltage_key = th voltage_value = 1.10 #register_key = vnfb #register_value = 18 [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50
29	Tue Oct 1 14:40:47 2024	tb-crew	1st tests	30	V W8-0E0	Topside	4.2	0.96	-190		Unknown	01.10.2024 14:35:42	01.10.2024 14:41:11	5
automatic log for run 30 Comment: telescope without DUT
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 0 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 0.96 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 00 00 0 0 0 0 0 00 01 0 0 0 0 0 00 02 0 0 0 0 0 00 03 0 0 0 0 0 00 04 0 0 0 0 0 00 05 0 0 0 0 0 00 06 0 0 0 0 0 00 07 0 0 0 0 0 00 08 0 0 0 0 0 00 09 0 0 0 0 0 00 10 0 0 0 0 0 00 11 0 0 0 0 0 00 12 0 0 0 0 0 00 13 0 0 0 0 0 00 14 0 0 0 0 0 00 15 0 0 0 0 0 00 16 0 0 0 0 0 00 17 0 0 0 0 11 00 18 0 0 0 0 10 00 19 0 0 0 0 9 00 20 0 0 0 0 6 00 21 0 0 0 0 5 00 22 0 0 0 0 8 00 23 0 0 0 0 7 00 24 0 0 0 0 8 00 25 0 0 0 0 5 00 26 0 0 0 0 6 00 27 0 0 0 0 3 00 28 0 0 0 0 7 00 29 0 0 0 0 7 00 30 0 0 0 0 9 00 31 0 0 0 0 4 00 32 0 0 0 0 7 00 33 0 0 0 0 6 00 34 0 0 0 0 8 00 35 0 0 0 0 7 00 36 0 0 0 0 9 00 37 0 0 0 0 7 00 38 0 0 0 0 9 00 39 0 0 0 0 7 00 40 0 0 0 0 11 00 41 0 0 0 0 6 00 42 0 0 0 0 8 00 43 0 0 0 0 6 00 44 0 0 0 0 8 00 45 0 0 0 0 10 00 46 0 0 0 0 5 00 47 0 0 0 0 7 00 48 0 0 0 0 7 00 49 0 0 0 0 7 00 50 0 0 0 0 7 00 51 0 0 0 0 8 00 52 0 0 0 0 9 00 53 0 0 0 0 7 00 54 0 0 0 0 7 00 55 0 0 0 0 8 00 56 0 0 0 0 8 00 57 0 0 0 0 6 00 58 0 0 0 0 9 00 59 0 0 0 0 5 00 60 0 0 0 0 7 00 61 0 0 0 0 5 00 62 1 0 0 0 8 00 63 0 0 0 0 8 01 00 0 0 0 0 14 01 01 0 0 0 0 8 01 02 0 0 0 0 7 01 03 0 0 0 0 7 01 04 0 0 0 0 8 01 05 0 0 0 0 3 01 06 0 0 0 0 9 01 07 0 0 0 0 10 01 08 0 0 0 0 6 01 09 0 0 0 0 9 01 10 0 0 0 0 8 01 11 0 0 0 0 5 01 12 0 0 0 0 8 01 13 0 0 0 0 8 01 14 0 0 0 0 7 01 15 0 0 0 0 3 01 16 0 0 0 0 6 01 17 0 0 0 0 10 01 18 0 0 0 0 7 01 19 0 0 0 0 8 01 20 0 0 0 0 7 01 21 0 0 0 0 9 01 22 0 0 0 0 6 01 23 0 0 0 0 10 01 24 0 0 0 0 6 01 25 0 0 0 0 8 01 26 0 0 0 0 8 01 27 0 0 0 0 7 01 28 0 0 0 0 6 01 29 0 0 0 0 4 01 30 0 0 0 0 8 01 31 0 0 0 0 6 01 32 0 0 0 0 8 01 33 0 0 0 0 6 01 34 0 0 0 0 12 01 35 0 0 0 0 7 01 36 0 0 0 0 6 01 37 0 0 0 0 6 01 38 0 0 0 0 10 01 39 0 0 0 0 7 01 40 0 0 0 0 8 01 41 0 0 0 0 4 01 42 0 0 0 0 10 01 43 0 0 0 0 6 01 44 0 0 0 0 6 01 45 0 0 0 0 9 01 46 0 0 0 0 9 01 47 0 0 0 0 7 01 48 0 0 0 0 4 01 49 0 0 0 0 8 01 50 0 0 0 0 9 01 51 0 0 0 0 7 01 52 0 0 0 0 8 01 53 0 0 0 0 9 01 54 0 0 0 0 8 01 55 0 0 0 0 5 01 56 0 0 0 0 8 01 57 0 0 0 0 8 01 58 0 0 0 0 6 01 59 0 0 0 0 5 01 60 0 0 0 0 7 01 61 0 0 0 0 6 01 62 0 0 0 0 8 01 63 0 0 0 0 8 02 00 0 0 0 0 6 02 01 0 0 0 0 7 02 02 0 0 0 0 11 02 03 0 0 0 0 7 02 04 0 0 0 0 9 02 05 0 0 0 0 10 02 06 0 0 0 0 9 02 07 0 0 0 0 8 02 08 0 0 0 0 7 02 09 0 0 0 0 8 02 10 0 0 0 0 7 02 11 0 0 0 0 7 02 12 0 0 0 0 8 02 13 0 0 0 0 5 02 14 0 0 0 0 7 02 15 0 0 0 0 6 02 16 0 0 0 0 8 02 17 0 0 0 0 8 02 18 0 0 0 0 8 02 19 0 0 0 0 8 02 20 0 0 0 0 8 02 21 0 0 0 0 7 02 22 0 0 0 0 6 02 23 0 0 0 0 7 02 24 0 0 0 0 9 02 25 0 0 0 0 6 02 26 0 0 0 0 4 02 27 0 0 0 0 8 02 28 0 0 0 0 7 02 29 0 0 0 0 7 02 30 0 0 0 0 8 02 31 0 0 0 0 9 02 32 0 0 0 0 6 02 33 0 0 0 0 7 02 34 0 0 0 0 7 02 35 0 0 0 0 8 02 36 0 0 0 0 8 02 37 0 0 0 0 10 02 38 0 0 0 0 6 02 39 0 0 0 0 6 02 40 0 0 0 0 7 02 41 0 0 0 0 8 02 42 0 0 0 0 6 02 43 0 0 0 0 8 02 44 0 0 0 0 6 02 45 0 0 0 0 8 02 46 0 0 0 0 10 02 47 0 0 0 0 8 02 48 0 0 0 0 6 02 49 0 0 0 0 10 02 50 0 0 0 0 6 02 51 0 0 0 0 7 02 52 0 0 0 0 7 02 53 0 0 0 0 5 02 54 0 0 0 0 8 02 55 0 0 0 0 6 02 56 0 0 0 0 5 02 57 0 0 0 0 6 02 58 0 0 0 0 11 02 59 0 0 0 0 11 02 60 0 0 0 0 8 02 61 0 0 0 0 8 02 62 0 0 0 0 10 02 63 0 0 0 0 6 03 00 0 0 0 0 7 03 01 0 0 0 0 9 03 02 0 0 0 0 6 03 03 0 0 0 0 4 03 04 0 0 0 0 8 03 05 0 0 0 0 8 03 06 0 0 0 0 6 03 07 0 0 0 0 6 03 08 0 0 0 0 7 03 09 0 0 0 0 7 03 10 0 0 0 0 7 03 11 0 0 0 0 6 03 12 0 0 0 0 10 03 13 0 0 0 0 4 03 14 0 0 0 0 7 03 15 0 0 0 0 4 03 16 0 0 0 0 6 03 17 0 0 0 0 9 03 18 0 0 0 0 11 03 19 0 0 0 0 7 03 20 0 0 0 0 6 03 21 0 0 0 0 6 03 22 0 0 0 0 6 03 23 0 0 0 0 6 03 24 0 0 0 0 6 03 25 0 0 0 0 7 03 26 0 0 0 0 6 03 27 0 0 0 0 5 03 28 0 0 0 0 8 03 29 0 0 0 0 6 03 30 0 0 0 0 6 03 31 0 0 0 0 10 03 32 0 0 0 0 7 03 33 0 0 0 0 6 03 34 0 0 0 0 8 03 35 0 0 0 0 6 03 36 0 0 0 0 8 03 37 0 0 0 0 9 03 38 0 0 0 0 8 03 39 0 0 0 0 8 03 40 0 0 0 0 5 03 41 0 0 0 0 6 03 42 0 0 0 0 10 03 43 0 0 0 0 9 03 44 0 0 0 0 8 03 45 0 0 0 0 9 03 46 0 0 0 0 8 03 47 0 0 0 0 4 03 48 0 0 0 0 8 03 49 0 0 0 0 6 03 50 0 0 0 0 4 03 51 0 0 0 0 8 03 52 0 0 0 0 8 03 53 0 0 0 0 8 03 54 0 0 0 0 5 03 55 0 0 0 0 5 03 56 0 0 0 0 10 03 57 0 0 0 0 6 03 58 0 0 0 0 5 03 59 0 0 0 0 6 03 60 0 0 0 0 7 03 61 0 0 0 0 6 03 62 0 0 0 0 6 03 63 0 0 0 0 4 04 00 0 0 0 0 8 04 01 0 0 0 0 12 04 02 0 0 0 0 9 04 03 0 0 0 0 6 04 04 0 0 0 0 8 04 05 0 0 0 0 9 04 06 0 0 0 0 10 04 07 0 0 0 0 9 04 08 0 0 0 0 5 04 09 0 0 0 0 7 04 10 0 0 0 0 6 04 11 0 0 0 0 10 04 12 0 0 0 0 7 04 13 0 0 0 0 8 04 14 0 0 0 0 7 04 15 0 0 0 0 8 04 16 0 0 0 0 6 04 17 0 0 0 0 9 04 18 0 0 0 0 9 04 19 0 0 0 0 9 04 20 0 0 0 0 8 04 21 0 0 0 0 8 04 22 0 0 0 0 8 04 23 0 0 0 0 9 04 24 0 0 0 0 5 04 25 0 0 0 0 5 04 26 0 0 0 0 9 04 27 0 0 0 0 9 04 28 0 0 0 0 7 04 29 0 0 0 0 5 04 30 0 0 0 0 6 04 31 0 0 0 0 7 04 32 0 0 0 0 6 04 33 0 0 0 0 7 04 34 0 0 0 0 7 04 35 0 0 0 0 6 04 36 0 0 0 0 5 04 37 0 0 0 0 9 ... 3802 more lines ...
Attachment 3: mpw4.conf
[RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER #[LogCollector.log] [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 ## TRIGGER CONFIGURATION #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 trigPol=0x0 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask = 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode = 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = "peary_config.cfg, matrix_mpw4_base.txt" start_cmd = "./get_mpw4_configs.sh" [Producer.keithleyPS] voltage = -190 max_current = 50e-6 ramp_step = 5 ramp_speed = 100 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] voltage_key = th voltage_value = 0.96 #register_key = vnfb #register_value = 36 [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50
46	Wed Oct 2 11:53:50 2024	tb-crew	1st tests	43	V W3-1E14	Backside	4.2	1.1	-190		Unknown	02.10.2024 11:48:20	02.10.2024 11:54:15	5
automatic log for run 43 Comment: some problems
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: mpw4.conf
[RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER [LogCollector.log] [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 ## TRIGGER CONFIGURATION #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 trigPol=0x0 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask = 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode = 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = "peary_config.cfg, matrix_mpw4_base.txt" start_cmd = "./get_mpw4_configs.sh" [Producer.keithleyPS] voltage = -190 max_current = 50e-6 ramp_step = 5 ramp_speed = 100 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] voltage_key = th voltage_value = 1.1 #register_key = vnfb #register_value = 36 [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50
54	Wed Oct 2 14:55:13 2024	tb-crew	1st tests	49	V W3-1E14	Backside	4.2	1.1	-190		Unknown	02.10.2024 14:50:19	02.10.2024 14:55:38	5
automatic log for run 49 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: mpw4.conf
[RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER [LogCollector.log] [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 ## TRIGGER CONFIGURATION #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 trigPol=0x0 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask = 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode = 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = "peary_config.cfg, matrix_mpw4_base.txt" start_cmd = "./get_mpw4_configs.sh" [Producer.keithleyPS] voltage = -190 max_current = 50e-6 ramp_step = 5 ramp_speed = 100 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] voltage_key = th voltage_value = 1.1 #register_key = vnfb #register_value = 36 [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50
80	Wed Oct 2 17:40:36 2024	tb-crew	manual HV scan	71	V W3-1E14	Backside	4.2	1.1	-490		Unknown	02.10.2024 17:35:31	02.10.2024 17:41:02	5
automatic log for run 71 Comment: -500V no problem, current 30uA
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_6.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 36 voltage_key = th voltage_value = 1.1 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 50e-6 ramp_speed = 100 ramp_step = 5 voltage = -490 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
298	Fri Oct 4 08:33:43 2024	tb-crew	VNFB scan	270	V W3-1E14	Backside	4.2	1.1	-500	30	Unknown	04.10.2024 08:28:24	04.10.2024 08:34:10	5
automatic log for run 270 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1
Attachment 3: default_3.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] register_key = vnfb register_value = 30 voltage_key = th voltage_value = 1.1 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -500 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
322	Fri Oct 4 12:19:01 2024	tb-crew	centering DUT	288	L W3-3E14	Backside	4.2	1.1	-190		Unknown	04.10.2024 12:13:43	04.10.2024 12:19:28	5
automatic log for run 288 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1
Attachment 3: mpw4.conf
[RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER [LogCollector.log] [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 ## TRIGGER CONFIGURATION #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 trigPol=0x0 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask = 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode = 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = "peary_config.cfg, matrix_mpw4_base.txt" start_cmd = "./get_mpw4_configs.sh" [Producer.keithleyPS] voltage = -190 max_current = 300e-6 ramp_step = 2.5 ramp_speed = 200 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] voltage_key = th voltage_value = 1.1 #register_key = vnfb #register_value = 18 [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50
524	Sun Oct 6 09:48:10 2024	tb-crew	HV scan	486	V W8-0E0	Topside	4.2	1.0	-10		Unknown	06.10.2024 09:43:28	06.10.2024 09:48:38	5
automatic log for run 486 Comment: no telescope data for entire run
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_54.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -10 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
192	Thu Oct 3 15:34:27 2024	tb-crew	1st tests	175	V W8-1E15	Topside	4.2	1.10	-190		Unknown	03.10.2024 14:48:32	03.10.2024 15:34:53	46
automatic log for run 175 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: mpw4.conf
[RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER [LogCollector.log] [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 ## TRIGGER CONFIGURATION #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 trigPol=0x0 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask = 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode = 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = "peary_config.cfg, matrix_mpw4_base.txt" start_cmd = "./get_mpw4_configs.sh" [Producer.keithleyPS] voltage = -190 max_current = 300e-6 ramp_step = 5 ramp_speed = 100 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] voltage_key = th voltage_value = 1.10 #register_key = vnfb #register_value = 18 [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50
59	Wed Oct 2 15:34:14 2024	tb-crew	1st tests	53	V W3-1E14	Backside	4.2	1.1	-190		Unknown	02.10.2024 15:30:30	02.10.2024 15:34:39	4
automatic log for run 53 Comment: alignment test currently at positionX = 52 positionY = 11
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: mpw4.conf
[RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER [LogCollector.log] [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 ## TRIGGER CONFIGURATION #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 trigPol=0x0 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask = 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode = 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = "peary_config.cfg, matrix_mpw4_base.txt" start_cmd = "./get_mpw4_configs.sh" [Producer.keithleyPS] voltage = -190 max_current = 50e-6 ramp_step = 5 ramp_speed = 100 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] voltage_key = th voltage_value = 1.1 #register_key = vnfb #register_value = 36 [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50
63	Wed Oct 2 15:47:17 2024	tb-crew	alignment runs	55	V W3-1E14	Backside	4.2	1.1	-190		Unknown	02.10.2024 15:43:05	02.10.2024 15:47:42	4
automatic log for run 55 Comment: alignment test currently at positionX = 51 positionY = 11
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: mpw4.conf
[RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER [LogCollector.log] [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 ## TRIGGER CONFIGURATION #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 trigPol=0x0 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask = 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode = 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = "peary_config.cfg, matrix_mpw4_base.txt" start_cmd = "./get_mpw4_configs.sh" [Producer.keithleyPS] voltage = -190 max_current = 50e-6 ramp_step = 5 ramp_speed = 100 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] voltage_key = th voltage_value = 1.1 #register_key = vnfb #register_value = 36 [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50
89	Wed Oct 2 22:08:10 2024	tb-crew	thr minimizing	80	V W3-1E14	Backside	4.2	1.02	-190		Unknown	02.10.2024 22:03:47	02.10.2024 22:08:36	4
automatic log for run 80 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: mpw4.conf
[RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER [LogCollector.log] [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 ## TRIGGER CONFIGURATION #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 trigPol=0x0 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask = 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode = 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = "peary_config.cfg, matrix_mpw4_base.txt" start_cmd = "./get_mpw4_configs.sh" [Producer.keithleyPS] voltage = -190 max_current = 50e-6 ramp_step = 5 ramp_speed = 100 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] voltage_key = th voltage_value = 1.02 #register_key = vnfb #register_value = 36 [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50
331	Fri Oct 4 14:05:36 2024	tb-crew	minimizing thr	296	L W3-3E14	Backside	4.2	0.95	-190		Unknown	04.10.2024 14:01:57	04.10.2024 14:06:03	4
automatic log for run 296 Comment: noisy guy in here
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1
Attachment 3: mpw4.conf
[RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER [LogCollector.log] [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 ## TRIGGER CONFIGURATION #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 trigPol=0x0 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask = 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode = 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = "peary_config.cfg, matrix_mpw4_base.txt" start_cmd = "./get_mpw4_configs.sh" [Producer.keithleyPS] voltage = -190 max_current = 300e-6 ramp_step = 2.5 ramp_speed = 200 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] voltage_key = th voltage_value = 0.95 #register_key = vnfb #register_value = 18 [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50
345	Fri Oct 4 15:58:50 2024	tb-crew	increasing HV	310	L W3-3E14	Backside	4.2	0.95	-460		Unknown	04.10.2024 15:54:24	04.10.2024 15:59:17	4
automatic log for run 310 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator # each line represents the configuration of an individual pixel # format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} # default values (which are not printed) are: # {row} {col} 0 0 0 0 -1 13 11 1 0 0 0 -1 13 12 1 0 0 0 -1 13 13 1 0 0 0 -1 14 11 1 0 0 0 -1 14 12 1 0 0 0 -1 14 13 1 0 0 0 -1 15 11 1 0 0 0 -1 15 12 1 0 0 0 -1 15 13 1 0 0 0 -1
Attachment 3: mpw4.conf
[RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER [LogCollector.log] [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 ## TRIGGER CONFIGURATION #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 trigPol=0x0 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask = 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode = 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = "peary_config.cfg, matrix_mpw4_base.txt" start_cmd = "./get_mpw4_configs.sh" [Producer.keithleyPS] voltage = -460 max_current = 300e-6 ramp_step = 2.5 ramp_speed = 200 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] voltage_key = th voltage_value = 0.95 #register_key = vnfb #register_value = 18 [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50
44	Wed Oct 2 11:30:46 2024	tb-crew	1st tests	41	V W3-1E14	Backside	4.2	1.1	-190		Unknown	02.10.2024 11:27:57	02.10.2024 11:31:11	3
automatic log for run 41 Comment: some problems
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: mpw4.conf
[RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER [LogCollector.log] [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 ## TRIGGER CONFIGURATION #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 trigPol=0x0 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask = 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode = 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = "peary_config.cfg, matrix_mpw4_base.txt" start_cmd = "./get_mpw4_configs.sh" [Producer.keithleyPS] voltage = -190 max_current = 50e-6 ramp_step = 5 ramp_speed = 100 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] voltage_key = th voltage_value = 1.1 #register_key = vnfb #register_value = 36 [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50
53	Wed Oct 2 14:39:46 2024	tb-crew	1st tests	48	V W3-1E14	Backside	4.2	1.1	-190		Unknown	02.10.2024 14:36:25	02.10.2024 14:40:12	3
automatic log for run 48 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: mpw4.conf
[RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER [LogCollector.log] [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 ## TRIGGER CONFIGURATION #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 trigPol=0x0 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask = 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode = 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = "peary_config.cfg, matrix_mpw4_base.txt" start_cmd = "./get_mpw4_configs.sh" [Producer.keithleyPS] voltage = -190 max_current = 50e-6 ramp_step = 5 ramp_speed = 100 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] voltage_key = th voltage_value = 1.1 #register_key = vnfb #register_value = 36 [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50
55	Wed Oct 2 15:00:43 2024	tb-crew	1st tests	50	V W3-1E14	Backside	4.2	1.1	-190		Unknown	02.10.2024 14:57:50	02.10.2024 15:01:08	3
automatic log for run 50 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: mpw4.conf
[RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER [LogCollector.log] [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 ## TRIGGER CONFIGURATION #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 trigPol=0x0 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask = 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode = 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = "peary_config.cfg, matrix_mpw4_base.txt" start_cmd = "./get_mpw4_configs.sh" [Producer.keithleyPS] voltage = -190 max_current = 50e-6 ramp_step = 5 ramp_speed = 100 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] voltage_key = th voltage_value = 1.1 #register_key = vnfb #register_value = 36 [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50
61	Wed Oct 2 15:39:12 2024	tb-crew	1st tests	54	V W3-1E14	Backside	4.2	1.1	-190		Unknown	02.10.2024 15:36:16	02.10.2024 15:39:37	3
automatic log for run 54 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: mpw4.conf
[RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER [LogCollector.log] [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 ## TRIGGER CONFIGURATION #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 trigPol=0x0 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask = 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode = 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = "peary_config.cfg, matrix_mpw4_base.txt" start_cmd = "./get_mpw4_configs.sh" [Producer.keithleyPS] voltage = -190 max_current = 50e-6 ramp_step = 5 ramp_speed = 100 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] voltage_key = th voltage_value = 1.1 #register_key = vnfb #register_value = 36 [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50
65	Wed Oct 2 16:01:11 2024	tb-crew	alignment runs	57	V W3-1E14	Backside	4.2	1.1	-190		Unknown	02.10.2024 15:57:44	02.10.2024 16:01:37	3
automatic log for run 57 Comment: alignment test currently at positionX = 54.5 positionY = 11
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: mpw4.conf
[RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER [LogCollector.log] [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 ## TRIGGER CONFIGURATION #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 trigPol=0x0 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask = 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode = 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = "peary_config.cfg, matrix_mpw4_base.txt" start_cmd = "./get_mpw4_configs.sh" [Producer.keithleyPS] voltage = -190 max_current = 50e-6 ramp_step = 5 ramp_speed = 100 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] voltage_key = th voltage_value = 1.1 #register_key = vnfb #register_value = 36 [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50
163	Thu Oct 3 10:42:55 2024	tb-crew	std settings	150	V W3-1W16	Topside	4.2	1.1	-190		Unknown	03.10.2024 10:39:42	03.10.2024 10:43:21	3
automatic log for run 150 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: mpw4.conf
[RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER [LogCollector.log] [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 ## TRIGGER CONFIGURATION #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 trigPol=0x0 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask = 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode = 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = "peary_config.cfg, matrix_mpw4_base.txt" start_cmd = "./get_mpw4_configs.sh" [Producer.keithleyPS] voltage = -190 max_current = 300e-6 ramp_step = 5 ramp_speed = 100 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] voltage_key = th voltage_value = 1.1 #register_key = vnfb #register_value = 18 [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50

Goto page Previous 1, 2, 3 ... 27, 28, 29 Next

ELOG V3.1.5-fc6679b