ELOG testbeam-rd50-desy-Oct2024

Home CMS Production Clean room MedAustron HEPHY testbeams old

testbeam-rd50-desy-Oct2024 testbeam-RD50-DESY-Apr2024 testbeam-RD50-DESY-Jul2023 testbeam-RD50-CERN-Oct2022 testbeam-DESY-Oct2017 testbeam-DESY-April2017 testbeam-SPS2015 testbeam-SPS2014 testbeam-DESY14 testbeam-SPS12 testbeam-SPS11 testbeam-SPS10 testbeam-SPS09 testbeam-SPS08 LP-TPC

Testbeam at DESY in October 2024, Page 10 of 29

Not logged in

Find | Login | Help

New entries since:

Thu Jan 1 01:00:00 1970

Full | Summary | Threaded | Hide attachments

564 Entries

Goto page Previous 1, 2, 3 ... 9, 10, 11 ... 27, 28, 29 Next

ID	Date	Author	Subject	Run Number	DUT	Biasing	Beam Energy	thr	HV	scan-val	Data	t-Start	t-Stop	Duration_min
547	Sun Oct 6 14:15:19 2024	tb-crew	HV scan		V W8-0E0	Topside	4.2	1.0	-150		Unknown
MPW4 data back again
548	Sun Oct 6 14:15:28 2024	tb-crew	HV scan	505	V W8-0E0	Topside	4.2	1.0	-150		Unknown	06.10.2024 14:15:24	06.10.2024 14:15:56	0
automatic log for run 505 Comment: MPW4 data back again
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_0.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -150 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
549	Sun Oct 6 14:26:25 2024	tb-crew	HV scan	506	V W8-0E0	Topside	4.2	1.0	-150		Unknown	06.10.2024 14:16:50	06.10.2024 14:26:54	10
automatic log for run 506 Comment: no TP data
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_0.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -150 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
550	Sun Oct 6 14:37:03 2024	tb-crew	HV scan	507	V W8-0E0	Topside	4.2	1.0	-140		Unknown	06.10.2024 14:27:28	06.10.2024 14:37:32	10
automatic log for run 507 Comment: no TP data
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_1.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -140 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
551	Sun Oct 6 14:47:38 2024	tb-crew	HV scan	508	V W8-0E0	Topside	4.2	1.0	-130		Unknown	06.10.2024 14:38:03	06.10.2024 14:48:07	10
automatic log for run 508 Comment: no TP data
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_2.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -130 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
552	Sun Oct 6 14:58:14 2024	tb-crew	HV scan	509	V W8-0E0	Topside	4.2	1.0	-120		Unknown	06.10.2024 14:48:39	06.10.2024 14:58:43	10
automatic log for run 509 Comment: no TP data
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_3.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -120 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
553	Sun Oct 6 15:08:51 2024	tb-crew	HV scan	510	V W8-0E0	Topside	4.2	1.0	-110		Unknown	06.10.2024 14:59:16	06.10.2024 15:09:20	10
automatic log for run 510 Comment: no TP data
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_4.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -110 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
554	Sun Oct 6 15:19:28 2024	tb-crew	HV scan	511	V W8-0E0	Topside	4.2	1.0	-100		Unknown	06.10.2024 15:09:53	06.10.2024 15:19:57	10
automatic log for run 511 Comment: no TP data
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_5.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -100 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
555	Sun Oct 6 15:30:05 2024	tb-crew	HV scan	512	V W8-0E0	Topside	4.2	1.0	-90		Unknown	06.10.2024 15:20:30	06.10.2024 15:30:34	10
automatic log for run 512 Comment: no TP data
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_6.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -90 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
556	Sun Oct 6 15:40:42 2024	tb-crew	HV scan	513	V W8-0E0	Topside	4.2	1.0	-80		Unknown	06.10.2024 15:31:07	06.10.2024 15:41:11	10
automatic log for run 513 Comment: no TP data
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_7.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -80 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
557	Sun Oct 6 15:51:18 2024	tb-crew	HV scan	514	V W8-0E0	Topside	4.2	1.0	-70		Unknown	06.10.2024 15:41:43	06.10.2024 15:51:47	10
automatic log for run 514 Comment: no TP data
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_8.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -70 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
558	Sun Oct 6 16:01:56 2024	tb-crew	HV scan	515	V W8-0E0	Topside	4.2	1.0	-60		Unknown	06.10.2024 15:52:21	06.10.2024 16:02:25	10
automatic log for run 515 Comment: no TP data
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_9.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -60 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
559	Sun Oct 6 16:12:30 2024	tb-crew	HV scan	516	V W8-0E0	Topside	4.2	1.0	-50		Unknown	06.10.2024 16:02:55	06.10.2024 16:12:59	10
automatic log for run 516 Comment: no TP data
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_10.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -50 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
560	Sun Oct 6 16:23:07 2024	tb-crew	HV scan	517	V W8-0E0	Topside	4.2	1.0	-40		Unknown	06.10.2024 16:13:32	06.10.2024 16:23:36	10
automatic log for run 517 Comment: no TP data
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_11.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -40 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
561	Sun Oct 6 16:33:44 2024	tb-crew	HV scan	518	V W8-0E0	Topside	4.2	1.0	-30		Unknown	06.10.2024 16:24:09	06.10.2024 16:34:13	10
automatic log for run 518 Comment: no TP data
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_12.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -30 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
562	Sun Oct 6 16:44:20 2024	tb-crew	HV scan	519	V W8-0E0	Topside	4.2	1.0	-20		Unknown	06.10.2024 16:34:45	06.10.2024 16:44:49	10
automatic log for run 519 Comment: no TP data
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_13.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -20 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
563	Sun Oct 6 16:54:54 2024	tb-crew	HV scan	520	V W8-0E0	Topside	4.2	1.0	-10		Unknown	06.10.2024 16:45:19	06.10.2024 16:55:23	10
automatic log for run 520 Comment: no TP data
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: default_14.conf
Name = /home/silicon/testbeam/desy2410/mpw4.conf [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [LogCollector.log] [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] #register_key = vnfb #register_value = 18 voltage_key = th voltage_value = 1.0 [Producer.aida_tlu] # Clock source (0 = no clock, 1= Si5345, 2= FPGA) # Generate internal triggers (in Hz, 0 = no triggers) # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) #DUTMask = 0x3 #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 DUTIgnoreBusy = 0x0 DUTIgnoreShutterVeto = 0x0 DUTMask = 0xD DUTMaskMode = 0xF1 DUTMaskModeModifier = 0x30 EUDAQ_DC = tlu_dc EnableRecordData = 1 EnableShutterMode = 0x0 HDMI1_clk = 1 HDMI1_set = 0x7 HDMI2_clk = 1 HDMI2_set = 0x7 HDMI3_clk = 1 HDMI3_set = 0x7 HDMI4_clk = 1 HDMI4_set = 0x7 InternalShutterInterval = 0 InternalTriggerFreq = 0 LEMOclk = 0 ShutterOffTime = 200000000 ShutterOnTime = 0 ShutterSource = 5 ShutterVetoOffTime = 0 confid = 20201311 delayStart = 200 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 skipconf = 0 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 trigPol = 0x0 verbose = 1 [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = peary_config.cfg, matrix_mpw4_base.txt start_cmd = ./get_mpw4_configs.sh [Producer.keithleyPS] max_current = 300e-6 ramp_speed = 200 ramp_step = 2.5 voltage = -10 [RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER
564	Sun Oct 6 17:04:22 2024	tb-crew	HV scan		V W8-0E0	Topside	4.2	1.0	-10		Unknown
end of success, testbeam done Greetings from TB22 Bernhard, Sam, Harald
155	Thu Oct 3 09:31:52 2024	tb-crew			V W3-1W16	Topside	4.2	1.05	-500	18	Unknown
changing DUT
156	Thu Oct 3 10:04:06 2024	tb-crew	playing around	144	V W3-1W16	Topside	4.2	1.05	-500	18	Unknown	03.10.2024 10:02:52	03.10.2024 10:04:32	1
automatic log for run 144 Comment:
Attachment 1: peary_config.cfg
#This config file was generated with the "MPW3_gui - Config Creator" #Do not change comment lines like "SEC::xxx" ! #They are needed for parsing [RD50_MPW4] this_config_file = config.cfg #SEC::MISC calib_file = calib_base.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 1 execute_file = execute.txt i2c_addr = 0x41 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_base.txt #SEC::REGISTERS conf_reg_ts_ctrl = 4 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i" bl__u = 0.9 bl__i = 3 del_hi__u = 0.7 del_hi__i = 3 del_lo__u = 0.9 del_lo__i = 3 inj__u = 0 inj__i = 3 p1v3_vssa__u = 1.3 p1v3_vssa__i = 3 p1v8_nw_ring__u = 1.8 p1v8_nw_ring__i = 3 p1v8_vdd!__u = 1.8 p1v8_vdd!__i = 3 p1v8_vdda__u = 1.8 p1v8_vdda__i = 3 p1v8_vddc__u = 1.8 p1v8_vddc__i = 3 p1v8_vddp__u = 1.8 p1v8_vddp__i = 3 p1v8_vsensbus__u = 1.8 p1v8_vsensbus__i = 3 p2v5d__u = 2.5 p2v5d__i = 3 th__u = 1 th__i = 3 [RD50_MPW4_Piggy] this_config_file = config.cfg #SEC::MISC calib_file = calib_piggy.txt config_si5345 = clock_config_mpw4.txt en_freeze = 1 en_hitbus_dcols = en_sfout_dcol = 0 en_tb_mode = 0 execute_file = execute.txt i2c_addr = 0x47 i2c_dev = /dev/i2c-9 inj_t0 = 0 matrix_config = matrix_mpw4_piggy.txt #SEC::REGISTERS conf_reg_ts_ctrl = 2 conf_reg_ts_ini = 0 cu_ctrl = 0 en_ext_ctrl = 0 en_ser_out_dcol = 0 en_sfout_dcol = 0 fei3_pulldn = 0 fei3_read = 3 idle0 = 251 idle1 = 247 idle2 = 247 idle3 = 247 tx_ctrl = 0 vbfb = 38 vblr = 38 vn = 21 vnfb = 18 vnsensbias = 50 vnsf = 45 vpbias = 37 vpcomp = 19 vptrim = 36 #SEC::POWER # voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt

Attachment 3: mpw4.conf
[RunControl] #EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0 #EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0 #pCT_STOP_RUN_AFTER_N_SECONDS = 3000000 ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER [LogCollector.log] [Producer.aida_tlu] ## GENERAL PARAMETERS verbose= 1 skipconf= 0 confid= 20201311 delayStart= 200 ## HDMI CONFIGURATION # 4-bits to determine direction of HDMI pins HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7) HDMI2_set= 0x7 HDMI3_set= 0x7 HDMI4_set= 0x7 # Clock source (0= no clock, 1= Si5345, 2= FPGA) HDMI1_clk = 1 HDMI2_clk = 1 HDMI3_clk = 1 HDMI4_clk = 1 # Enable/Disable clock on differential LEMO LEMOclk = 0 ## PMT POWER CONFIGURATION #PMT1_V = 0.8 #PMT2_V = 0.85 #PMT3_V = 0.8 #PMT4_V = 0.0 ## TRIGGER CONFIGURATION #trigMaskHi = 0x00000000 #trigMaskLo = 0x00000002 trigMaskHi = 0x00000001 trigMaskLo = 0x00000000 in0_DEL = 0 in0_STR = 0x3F in1_DEL = 0 in1_STR = 1 in2_DEL = 0 in2_STR = 0x3F in3_DEL = 0 in3_STR = 1 in4_DEL = 0 in4_STR = 0 in5_DEL = 0 in5_STR = 0 # Generate internal triggers (in Hz, 0= no triggers) InternalTriggerFreq= 0 #4000 #00 ## DISCRIMINATOR THRESHOLDS DACThreshold0 = +0.3 DACThreshold1 = -0.04 DACThreshold2 = -0.04 DACThreshold3 = -1.2 DACThreshold4 = -1.2 DACThreshold5 = +0.3 trigPol=0x0 ## DUT CONFIGURATION # DUTMask Which DUTs are on #DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4 DUTMask = 0xD # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT) DUTMaskMode = 0xF1 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!) DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben # Ignore the BUSY signal for a DUT (0xF) DUTIgnoreBusy= 0x0 #ignores triggers DUTIgnoreShutterVeto= 0x0 EnableRecordData= 1 # EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled. EnableShutterMode= 0x0 # Define which input is used for shutter source [0 - 5] ShutterSource = 5 # 32-bit counter of clocks. Set to 0 to not use internal shutter generator. InternalShutterInterval = 0 # 32-bit counter of clocks ShutterOnTime = 0 #start of shutter after trigger # 32-bit counter of clocks ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output # 32-bit counter of clocks ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns) ## DATA COLLECTOR EUDAQ_DC= tlu_dc [Producer.altel] EUDAQ_DC = tel_dc EUDAQ_ID = 1 [Producer.elog1] files2log = "peary_config.cfg, matrix_mpw4_base.txt" start_cmd = "./get_mpw4_configs.sh" [Producer.keithleyPS] voltage = -500 max_current = 50e-6 ramp_step = 5 ramp_speed = 100 [Producer.MuPix8] #EUDAQ_DC = tel_dc #lazyFrog = -25 #register_value = 0 ThPix = 144 [Producer.RD50_MPW4_0] voltage_key = th voltage_value = 1.05 register_key = vnfb register_value = 18 [DataCollector.mpw4_dc] DISABLE_PRINT = 1 EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100 EUDAQ_FW = native EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X EUDAQ_MN = mpw4_mon XILINX_IP = 192.168.201.1 [DataCollector.tel_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X [DataCollector.tlu_dc] DISABLE_PRINT = 1 EUDAQ_FW = native EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X [Monitor.mpw4_mon] buffer_size = 50000 update_thr = 50

Goto page Previous 1, 2, 3 ... 9, 10, 11 ... 27, 28, 29 Next

ELOG V3.1.5-fc6679b