Home CMS Production Clean room MedAustron HEPHY testbeams old
testbeam-rd50-desy-Oct2024 testbeam-RD50-DESY-Apr2024 testbeam-RD50-DESY-Jul2023 testbeam-RD50-CERN-Oct2022 testbeam-DESY-Oct2017 testbeam-DESY-April2017 testbeam-SPS2015 testbeam-SPS2014 testbeam-DESY14 testbeam-SPS12 testbeam-SPS11 testbeam-SPS10 testbeam-SPS09 testbeam-SPS08 LP-TPC
  Testbeam at DESY in October 2024, Page 1 of 29  Not logged in ELOG logo
 Find |  Login |  Help 
New entries since:Thu Jan 1 01:00:00 1970
 Full | Summary | Threaded | Hide attachments  Show all entries    564 Entries 
Goto page 1, 2, 3 ... 27, 28, 29   Next  
ID Date Authordown Subject Run Number DUT Biasing Beam Energy thr HV scan-val Data t-Start t-Stop Duration_min
  1   Mon Sep 30 14:29:07 2024 tb-crew1st tests V W8-0E0Topside1.0   Unknown   
very first entry from TB22 Big grin
Best data ever about to be generated
  2   Mon Sep 30 14:29:40 2024 tb-crew1st tests V W8-0E0Topside1.0   Unknown   
bla
  3   Mon Sep 30 14:30:05 2024 tb-crew1st tests V W8-0E0Topside1.0   Unknown   
test
  4   Mon Sep 30 14:38:55 2024 tb-crew1st tests V W8-0E0Backside4.2 -10 Unknown   
test
  5   Mon Sep 30 17:01:28 2024 tb-crew1st tests V W8-0E0Backside4.2 -10 Unknown   
test
  6   Mon Sep 30 18:46:08 2024 tb-crew1st tests2V W8-0E0Backside4.2 -100 Unknown30.09.2024 18:46:2330.09.2024 18:46:320
automatic log for run 2
Comment:
Attachment 1: peary_config.cfg 
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing



[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 0
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_base.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 0


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 0.91
th__i = 3


[RD50_MPW4_Piggy]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_piggy.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 0
execute_file = execute.txt
i2c_addr = 0x47
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_piggy.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt 
0 0 0 0 0 0 0
0 1 0 0 0 0 0
0 2 0 0 0 0 0
0 3 0 0 0 0 0
0 4 0 0 0 0 0
0 5 0 0 0 0 0
0 6 0 0 0 0 0
0 7 0 0 0 0 0
0 8 0 0 0 0 0
0 9 0 0 0 0 0
0 10 0 0 0 0 0
0 11 0 0 0 0 0
0 12 0 0 0 0 0
0 13 0 0 0 0 0
0 14 0 0 0 0 0
0 15 0 0 0 0 0
0 16 0 0 0 0 0
0 17 0 0 0 0 11
0 18 0 0 0 0 10
0 19 0 0 0 0 9
0 20 0 0 0 0 6
0 21 0 0 0 0 5
0 22 0 0 0 0 8
0 23 0 0 0 0 7
0 24 0 0 0 0 8
0 25 0 0 0 0 5
0 26 0 0 0 0 6
0 27 0 0 0 0 3
0 28 0 0 0 0 7
0 29 0 0 0 0 7
0 30 0 0 0 0 9
0 31 0 0 0 0 4
0 32 0 0 0 0 7
0 33 0 0 0 0 6
0 34 0 0 0 0 8
0 35 0 0 0 0 7
0 36 0 0 0 0 9
0 37 0 0 0 0 7
0 38 0 0 0 0 9
0 39 0 0 0 0 7
0 40 0 0 0 0 11
0 41 0 0 0 0 6
0 42 0 0 0 0 8
0 43 0 0 0 0 6
0 44 0 0 0 0 8
0 45 0 0 0 0 10
0 46 0 0 0 0 5
0 47 0 0 0 0 7
0 48 0 0 0 0 7
0 49 0 0 0 0 7
0 50 0 0 0 0 7
0 51 0 0 0 0 8
0 52 0 0 0 0 9
0 53 0 0 0 0 7
0 54 0 0 0 0 7
0 55 0 0 0 0 8
0 56 0 0 0 0 8
0 57 0 0 0 0 6
0 58 0 0 0 0 9
0 59 0 0 0 0 5
0 60 0 0 0 0 7
0 61 0 0 0 0 5
0 62 1 0 0 0 8
0 63 0 0 0 0 8
1 0 0 0 0 0 14
1 1 0 0 0 0 8
1 2 0 0 0 0 7
1 3 0 0 0 0 7
1 4 0 0 0 0 8
1 5 0 0 0 0 3
1 6 0 0 0 0 9
1 7 0 0 0 0 10
1 8 0 0 0 0 6
1 9 0 0 0 0 9
1 10 0 0 0 0 8
1 11 0 0 0 0 5
1 12 0 0 0 0 8
1 13 0 0 0 0 8
1 14 0 0 0 0 7
1 15 0 0 0 0 3
1 16 0 0 0 0 6
1 17 0 0 0 0 10
1 18 0 0 0 0 7
1 19 0 0 0 0 8
1 20 0 0 0 0 7
1 21 0 0 0 0 9
1 22 0 0 0 0 6
1 23 0 0 0 0 10
1 24 0 0 0 0 6
1 25 0 0 0 0 8
1 26 0 0 0 0 8
1 27 0 0 0 0 7
1 28 0 0 0 0 6
1 29 0 0 0 0 4
1 30 0 0 0 0 8
1 31 0 0 0 0 6
1 32 0 0 0 0 8
1 33 0 0 0 0 6
1 34 0 0 0 0 12
1 35 0 0 0 0 7
1 36 0 0 0 0 6
1 37 0 0 0 0 6
1 38 0 0 0 0 10
1 39 0 0 0 0 7
1 40 0 0 0 0 8
1 41 0 0 0 0 4
1 42 0 0 0 0 10
1 43 0 0 0 0 6
1 44 0 0 0 0 6
1 45 0 0 0 0 9
1 46 0 0 0 0 9
1 47 0 0 0 0 7
1 48 0 0 0 0 4
1 49 0 0 0 0 8
1 50 0 0 0 0 9
1 51 0 0 0 0 7
1 52 0 0 0 0 8
1 53 0 0 0 0 9
1 54 0 0 0 0 8
1 55 0 0 0 0 5
1 56 0 0 0 0 8
1 57 0 0 0 0 8
1 58 0 0 0 0 6
1 59 0 0 0 0 5
1 60 0 0 0 0 7
1 61 0 0 0 0 6
1 62 0 0 0 0 8
1 63 0 0 0 0 8
2 0 0 0 0 0 6
2 1 0 0 0 0 7
2 2 0 0 0 0 11
2 3 0 0 0 0 7
2 4 0 0 0 0 9
2 5 0 0 0 0 10
2 6 0 0 0 0 9
2 7 0 0 0 0 8
2 8 0 0 0 0 7
2 9 0 0 0 0 8
2 10 0 0 0 0 7
2 11 0 0 0 0 7
2 12 0 0 0 0 8
2 13 0 0 0 0 5
2 14 0 0 0 0 7
2 15 0 0 0 0 6
2 16 0 0 0 0 8
2 17 0 0 0 0 8
2 18 0 0 0 0 8
2 19 0 0 0 0 8
2 20 0 0 0 0 8
2 21 0 0 0 0 7
2 22 0 0 0 0 6
2 23 0 0 0 0 7
2 24 0 0 0 0 9
2 25 0 0 0 0 6
2 26 0 0 0 0 4
2 27 0 0 0 0 8
2 28 0 0 0 0 7
2 29 0 0 0 0 7
2 30 0 0 0 0 8
2 31 0 0 0 0 9
2 32 0 0 0 0 6
2 33 0 0 0 0 7
2 34 0 0 0 0 7
2 35 0 0 0 0 8
2 36 0 0 0 0 8
2 37 0 0 0 0 10
2 38 0 0 0 0 6
2 39 0 0 0 0 6
2 40 0 0 0 0 7
2 41 0 0 0 0 8
2 42 0 0 0 0 6
2 43 0 0 0 0 8
2 44 0 0 0 0 6
2 45 0 0 0 0 8
2 46 0 0 0 0 10
2 47 0 0 0 0 8
2 48 0 0 0 0 6
2 49 0 0 0 0 10
2 50 0 0 0 0 6
2 51 0 0 0 0 7
2 52 0 0 0 0 7
2 53 0 0 0 0 5
2 54 0 0 0 0 8
2 55 0 0 0 0 6
2 56 0 0 0 0 5
2 57 0 0 0 0 6
2 58 0 0 0 0 11
2 59 0 0 0 0 11
2 60 0 0 0 0 8
2 61 0 0 0 0 8
2 62 0 0 0 0 10
2 63 0 0 0 0 6
3 0 0 0 0 0 7
3 1 0 0 0 0 9
3 2 0 0 0 0 6
3 3 0 0 0 0 4
3 4 0 0 0 0 8
3 5 0 0 0 0 8
3 6 0 0 0 0 6
3 7 0 0 0 0 6
3 8 0 0 0 0 7
3 9 0 0 0 0 7
3 10 0 0 0 0 7
3 11 0 0 0 0 6
3 12 0 0 0 0 10
3 13 0 0 0 0 4
3 14 0 0 0 0 7
3 15 0 0 0 0 4
3 16 0 0 0 0 6
3 17 0 0 0 0 9
3 18 0 0 0 0 11
3 19 0 0 0 0 7
3 20 0 0 0 0 6
3 21 0 0 0 0 6
3 22 0 0 0 0 6
3 23 0 0 0 0 6
3 24 0 0 0 0 6
3 25 0 0 0 0 7
3 26 0 0 0 0 6
3 27 0 0 0 0 5
3 28 0 0 0 0 8
3 29 0 0 0 0 6
3 30 0 0 0 0 6
3 31 0 0 0 0 10
3 32 0 0 0 0 7
3 33 0 0 0 0 6
3 34 0 0 0 0 8
3 35 0 0 0 0 6
3 36 0 0 0 0 8
3 37 0 0 0 0 9
3 38 0 0 0 0 8
3 39 0 0 0 0 8
3 40 0 0 0 0 5
3 41 0 0 0 0 6
3 42 0 0 0 0 10
3 43 0 0 0 0 9
3 44 0 0 0 0 8
3 45 0 0 0 0 9
3 46 0 0 0 0 8
3 47 0 0 0 0 4
3 48 0 0 0 0 8
3 49 0 0 0 0 6
3 50 0 0 0 0 4
3 51 0 0 0 0 8
3 52 0 0 0 0 8
3 53 0 0 0 0 8
3 54 0 0 0 0 5
3 55 0 0 0 0 5
3 56 0 0 0 0 10
3 57 0 0 0 0 6
3 58 0 0 0 0 5
3 59 0 0 0 0 6
3 60 0 0 0 0 7
3 61 0 0 0 0 6
3 62 0 0 0 0 6
3 63 0 0 0 0 4
4 0 0 0 0 0 8
4 1 0 0 0 0 12
4 2 0 0 0 0 9
4 3 0 0 0 0 6
4 4 0 0 0 0 8
4 5 0 0 0 0 9
4 6 0 0 0 0 10
4 7 0 0 0 0 9
4 8 0 0 0 0 5
4 9 0 0 0 0 7
4 10 0 0 0 0 6
4 11 0 0 0 0 10
4 12 0 0 0 0 7
4 13 0 0 0 0 8
4 14 0 0 0 0 7
4 15 0 0 0 0 8
4 16 0 0 0 0 6
4 17 0 0 0 0 9
4 18 0 0 0 0 9
4 19 0 0 0 0 9
4 20 0 0 0 0 8
4 21 0 0 0 0 8
4 22 0 0 0 0 8
4 23 0 0 0 0 9
4 24 0 0 0 0 5
4 25 0 0 0 0 5
4 26 0 0 0 0 9
4 27 0 0 0 0 9
4 28 0 0 0 0 7
4 29 0 0 0 0 5
4 30 0 0 0 0 6
4 31 0 0 0 0 7
4 32 0 0 0 0 6
4 33 0 0 0 0 7
4 34 0 0 0 0 7
4 35 0 0 0 0 6
4 36 0 0 0 0 5
4 37 0 0 0 0 9
4 38 0 0 0 0 7
4 39 0 0 0 0 8
4 40 0 0 0 0 9
4 41 0 0 0 0 6
4 42 0 0 0 0 7
4 43 0 0 0 0 6
... 3796 more lines ...
Attachment 3: mpw4.conf 
[RunControl]
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER

[LogCollector.log]

[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
#PMT1_V = 0.8
#PMT2_V = 0.85
#PMT3_V = 0.8
#PMT4_V = 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000002
in0_DEL = 0
in0_STR = 0x3F
in1_DEL = 0
in1_STR = 1
in2_DEL = 0
in2_STR = 0x3F
in3_DEL = 0
in3_STR = 1
in4_DEL = 0
in4_STR = 0
in5_DEL = 0
in5_STR = 0

# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3
DACThreshold1 = -0.04
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask = 0xD

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode = 0xF1

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0xF #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1

# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc


[Producer.altel]
EUDAQ_DC = tel_dc
EUDAQ_ID = 1


[Producer.elog1]
files2log = "peary_config.cfg, matrix_mpw4_base.txt"
start_cmd = "./get_mpw4_configs.sh"


[Producer.keithleyPS]
voltage = -100
max_current = 50e-6
ramp_step = 5
ramp_speed = 100


[Producer.MuPix8]
#EUDAQ_DC = tel_dc
#lazyFrog = -25
#register_value = 0
ThPix = 144


[Producer.RD50_MPW4_0]
#voltage_key = th
#voltage_value = 1.28
#register_key = vnfb
#register_value = 36


[DataCollector.mpw4_dc]
DISABLE_PRINT = 1
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_MN = mpw4_mon
XILINX_IP = 192.168.201.1


[DataCollector.tel_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X


[DataCollector.tlu_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X


[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
  7   Mon Sep 30 18:47:15 2024 tb-crew1st tests3V W8-0E0Backside4.2 -180 Unknown30.09.2024 18:47:0430.09.2024 18:47:390
automatic log for run 3
Comment:
Attachment 1: peary_config.cfg 
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing



[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 0
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_base.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 0


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 0.91
th__i = 3


[RD50_MPW4_Piggy]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_piggy.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 0
execute_file = execute.txt
i2c_addr = 0x47
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_piggy.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt 
0 0 0 0 0 0 0
0 1 0 0 0 0 0
0 2 0 0 0 0 0
0 3 0 0 0 0 0
0 4 0 0 0 0 0
0 5 0 0 0 0 0
0 6 0 0 0 0 0
0 7 0 0 0 0 0
0 8 0 0 0 0 0
0 9 0 0 0 0 0
0 10 0 0 0 0 0
0 11 0 0 0 0 0
0 12 0 0 0 0 0
0 13 0 0 0 0 0
0 14 0 0 0 0 0
0 15 0 0 0 0 0
0 16 0 0 0 0 0
0 17 0 0 0 0 11
0 18 0 0 0 0 10
0 19 0 0 0 0 9
0 20 0 0 0 0 6
0 21 0 0 0 0 5
0 22 0 0 0 0 8
0 23 0 0 0 0 7
0 24 0 0 0 0 8
0 25 0 0 0 0 5
0 26 0 0 0 0 6
0 27 0 0 0 0 3
0 28 0 0 0 0 7
0 29 0 0 0 0 7
0 30 0 0 0 0 9
0 31 0 0 0 0 4
0 32 0 0 0 0 7
0 33 0 0 0 0 6
0 34 0 0 0 0 8
0 35 0 0 0 0 7
0 36 0 0 0 0 9
0 37 0 0 0 0 7
0 38 0 0 0 0 9
0 39 0 0 0 0 7
0 40 0 0 0 0 11
0 41 0 0 0 0 6
0 42 0 0 0 0 8
0 43 0 0 0 0 6
0 44 0 0 0 0 8
0 45 0 0 0 0 10
0 46 0 0 0 0 5
0 47 0 0 0 0 7
0 48 0 0 0 0 7
0 49 0 0 0 0 7
0 50 0 0 0 0 7
0 51 0 0 0 0 8
0 52 0 0 0 0 9
0 53 0 0 0 0 7
0 54 0 0 0 0 7
0 55 0 0 0 0 8
0 56 0 0 0 0 8
0 57 0 0 0 0 6
0 58 0 0 0 0 9
0 59 0 0 0 0 5
0 60 0 0 0 0 7
0 61 0 0 0 0 5
0 62 1 0 0 0 8
0 63 0 0 0 0 8
1 0 0 0 0 0 14
1 1 0 0 0 0 8
1 2 0 0 0 0 7
1 3 0 0 0 0 7
1 4 0 0 0 0 8
1 5 0 0 0 0 3
1 6 0 0 0 0 9
1 7 0 0 0 0 10
1 8 0 0 0 0 6
1 9 0 0 0 0 9
1 10 0 0 0 0 8
1 11 0 0 0 0 5
1 12 0 0 0 0 8
1 13 0 0 0 0 8
1 14 0 0 0 0 7
1 15 0 0 0 0 3
1 16 0 0 0 0 6
1 17 0 0 0 0 10
1 18 0 0 0 0 7
1 19 0 0 0 0 8
1 20 0 0 0 0 7
1 21 0 0 0 0 9
1 22 0 0 0 0 6
1 23 0 0 0 0 10
1 24 0 0 0 0 6
1 25 0 0 0 0 8
1 26 0 0 0 0 8
1 27 0 0 0 0 7
1 28 0 0 0 0 6
1 29 0 0 0 0 4
1 30 0 0 0 0 8
1 31 0 0 0 0 6
1 32 0 0 0 0 8
1 33 0 0 0 0 6
1 34 0 0 0 0 12
1 35 0 0 0 0 7
1 36 0 0 0 0 6
1 37 0 0 0 0 6
1 38 0 0 0 0 10
1 39 0 0 0 0 7
1 40 0 0 0 0 8
1 41 0 0 0 0 4
1 42 0 0 0 0 10
1 43 0 0 0 0 6
1 44 0 0 0 0 6
1 45 0 0 0 0 9
1 46 0 0 0 0 9
1 47 0 0 0 0 7
1 48 0 0 0 0 4
1 49 0 0 0 0 8
1 50 0 0 0 0 9
1 51 0 0 0 0 7
1 52 0 0 0 0 8
1 53 0 0 0 0 9
1 54 0 0 0 0 8
1 55 0 0 0 0 5
1 56 0 0 0 0 8
1 57 0 0 0 0 8
1 58 0 0 0 0 6
1 59 0 0 0 0 5
1 60 0 0 0 0 7
1 61 0 0 0 0 6
1 62 0 0 0 0 8
1 63 0 0 0 0 8
2 0 0 0 0 0 6
2 1 0 0 0 0 7
2 2 0 0 0 0 11
2 3 0 0 0 0 7
2 4 0 0 0 0 9
2 5 0 0 0 0 10
2 6 0 0 0 0 9
2 7 0 0 0 0 8
2 8 0 0 0 0 7
2 9 0 0 0 0 8
2 10 0 0 0 0 7
2 11 0 0 0 0 7
2 12 0 0 0 0 8
2 13 0 0 0 0 5
2 14 0 0 0 0 7
2 15 0 0 0 0 6
2 16 0 0 0 0 8
2 17 0 0 0 0 8
2 18 0 0 0 0 8
2 19 0 0 0 0 8
2 20 0 0 0 0 8
2 21 0 0 0 0 7
2 22 0 0 0 0 6
2 23 0 0 0 0 7
2 24 0 0 0 0 9
2 25 0 0 0 0 6
2 26 0 0 0 0 4
2 27 0 0 0 0 8
2 28 0 0 0 0 7
2 29 0 0 0 0 7
2 30 0 0 0 0 8
2 31 0 0 0 0 9
2 32 0 0 0 0 6
2 33 0 0 0 0 7
2 34 0 0 0 0 7
2 35 0 0 0 0 8
2 36 0 0 0 0 8
2 37 0 0 0 0 10
2 38 0 0 0 0 6
2 39 0 0 0 0 6
2 40 0 0 0 0 7
2 41 0 0 0 0 8
2 42 0 0 0 0 6
2 43 0 0 0 0 8
2 44 0 0 0 0 6
2 45 0 0 0 0 8
2 46 0 0 0 0 10
2 47 0 0 0 0 8
2 48 0 0 0 0 6
2 49 0 0 0 0 10
2 50 0 0 0 0 6
2 51 0 0 0 0 7
2 52 0 0 0 0 7
2 53 0 0 0 0 5
2 54 0 0 0 0 8
2 55 0 0 0 0 6
2 56 0 0 0 0 5
2 57 0 0 0 0 6
2 58 0 0 0 0 11
2 59 0 0 0 0 11
2 60 0 0 0 0 8
2 61 0 0 0 0 8
2 62 0 0 0 0 10
2 63 0 0 0 0 6
3 0 0 0 0 0 7
3 1 0 0 0 0 9
3 2 0 0 0 0 6
3 3 0 0 0 0 4
3 4 0 0 0 0 8
3 5 0 0 0 0 8
3 6 0 0 0 0 6
3 7 0 0 0 0 6
3 8 0 0 0 0 7
3 9 0 0 0 0 7
3 10 0 0 0 0 7
3 11 0 0 0 0 6
3 12 0 0 0 0 10
3 13 0 0 0 0 4
3 14 0 0 0 0 7
3 15 0 0 0 0 4
3 16 0 0 0 0 6
3 17 0 0 0 0 9
3 18 0 0 0 0 11
3 19 0 0 0 0 7
3 20 0 0 0 0 6
3 21 0 0 0 0 6
3 22 0 0 0 0 6
3 23 0 0 0 0 6
3 24 0 0 0 0 6
3 25 0 0 0 0 7
3 26 0 0 0 0 6
3 27 0 0 0 0 5
3 28 0 0 0 0 8
3 29 0 0 0 0 6
3 30 0 0 0 0 6
3 31 0 0 0 0 10
3 32 0 0 0 0 7
3 33 0 0 0 0 6
3 34 0 0 0 0 8
3 35 0 0 0 0 6
3 36 0 0 0 0 8
3 37 0 0 0 0 9
3 38 0 0 0 0 8
3 39 0 0 0 0 8
3 40 0 0 0 0 5
3 41 0 0 0 0 6
3 42 0 0 0 0 10
3 43 0 0 0 0 9
3 44 0 0 0 0 8
3 45 0 0 0 0 9
3 46 0 0 0 0 8
3 47 0 0 0 0 4
3 48 0 0 0 0 8
3 49 0 0 0 0 6
3 50 0 0 0 0 4
3 51 0 0 0 0 8
3 52 0 0 0 0 8
3 53 0 0 0 0 8
3 54 0 0 0 0 5
3 55 0 0 0 0 5
3 56 0 0 0 0 10
3 57 0 0 0 0 6
3 58 0 0 0 0 5
3 59 0 0 0 0 6
3 60 0 0 0 0 7
3 61 0 0 0 0 6
3 62 0 0 0 0 6
3 63 0 0 0 0 4
4 0 0 0 0 0 8
4 1 0 0 0 0 12
4 2 0 0 0 0 9
4 3 0 0 0 0 6
4 4 0 0 0 0 8
4 5 0 0 0 0 9
4 6 0 0 0 0 10
4 7 0 0 0 0 9
4 8 0 0 0 0 5
4 9 0 0 0 0 7
4 10 0 0 0 0 6
4 11 0 0 0 0 10
4 12 0 0 0 0 7
4 13 0 0 0 0 8
4 14 0 0 0 0 7
4 15 0 0 0 0 8
4 16 0 0 0 0 6
4 17 0 0 0 0 9
4 18 0 0 0 0 9
4 19 0 0 0 0 9
4 20 0 0 0 0 8
4 21 0 0 0 0 8
4 22 0 0 0 0 8
4 23 0 0 0 0 9
4 24 0 0 0 0 5
4 25 0 0 0 0 5
4 26 0 0 0 0 9
4 27 0 0 0 0 9
4 28 0 0 0 0 7
4 29 0 0 0 0 5
4 30 0 0 0 0 6
4 31 0 0 0 0 7
4 32 0 0 0 0 6
4 33 0 0 0 0 7
4 34 0 0 0 0 7
4 35 0 0 0 0 6
4 36 0 0 0 0 5
4 37 0 0 0 0 9
4 38 0 0 0 0 7
4 39 0 0 0 0 8
4 40 0 0 0 0 9
4 41 0 0 0 0 6
4 42 0 0 0 0 7
4 43 0 0 0 0 6
... 3796 more lines ...
Attachment 3: mpw4.conf 
[RunControl]
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER

[LogCollector.log]

[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
#PMT1_V = 0.8
#PMT2_V = 0.85
#PMT3_V = 0.8
#PMT4_V = 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000002
in0_DEL = 0
in0_STR = 0x3F
in1_DEL = 0
in1_STR = 1
in2_DEL = 0
in2_STR = 0x3F
in3_DEL = 0
in3_STR = 1
in4_DEL = 0
in4_STR = 0
in5_DEL = 0
in5_STR = 0

# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3
DACThreshold1 = -0.04
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask = 0xD

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode = 0xF1

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0xF #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1

# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc


[Producer.altel]
EUDAQ_DC = tel_dc
EUDAQ_ID = 1


[Producer.elog1]
files2log = "peary_config.cfg, matrix_mpw4_base.txt"
start_cmd = "./get_mpw4_configs.sh"


[Producer.keithleyPS]
voltage = -180
max_current = 50e-6
ramp_step = 5
ramp_speed = 100


[Producer.MuPix8]
#EUDAQ_DC = tel_dc
#lazyFrog = -25
#register_value = 0
ThPix = 144


[Producer.RD50_MPW4_0]
#voltage_key = th
#voltage_value = 1.28
#register_key = vnfb
#register_value = 36


[DataCollector.mpw4_dc]
DISABLE_PRINT = 1
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_MN = mpw4_mon
XILINX_IP = 192.168.201.1


[DataCollector.tel_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X


[DataCollector.tlu_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X


[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
  8   Mon Sep 30 18:47:47 2024 tb-crew1st tests4V W8-0E0Backside4.2 -220 Unknown30.09.2024 18:48:0430.09.2024 18:48:110
automatic log for run 4
Comment:
Attachment 1: peary_config.cfg 
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing



[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 0
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_base.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 0


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 0.91
th__i = 3


[RD50_MPW4_Piggy]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_piggy.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 0
execute_file = execute.txt
i2c_addr = 0x47
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_piggy.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt 
0 0 0 0 0 0 0
0 1 0 0 0 0 0
0 2 0 0 0 0 0
0 3 0 0 0 0 0
0 4 0 0 0 0 0
0 5 0 0 0 0 0
0 6 0 0 0 0 0
0 7 0 0 0 0 0
0 8 0 0 0 0 0
0 9 0 0 0 0 0
0 10 0 0 0 0 0
0 11 0 0 0 0 0
0 12 0 0 0 0 0
0 13 0 0 0 0 0
0 14 0 0 0 0 0
0 15 0 0 0 0 0
0 16 0 0 0 0 0
0 17 0 0 0 0 11
0 18 0 0 0 0 10
0 19 0 0 0 0 9
0 20 0 0 0 0 6
0 21 0 0 0 0 5
0 22 0 0 0 0 8
0 23 0 0 0 0 7
0 24 0 0 0 0 8
0 25 0 0 0 0 5
0 26 0 0 0 0 6
0 27 0 0 0 0 3
0 28 0 0 0 0 7
0 29 0 0 0 0 7
0 30 0 0 0 0 9
0 31 0 0 0 0 4
0 32 0 0 0 0 7
0 33 0 0 0 0 6
0 34 0 0 0 0 8
0 35 0 0 0 0 7
0 36 0 0 0 0 9
0 37 0 0 0 0 7
0 38 0 0 0 0 9
0 39 0 0 0 0 7
0 40 0 0 0 0 11
0 41 0 0 0 0 6
0 42 0 0 0 0 8
0 43 0 0 0 0 6
0 44 0 0 0 0 8
0 45 0 0 0 0 10
0 46 0 0 0 0 5
0 47 0 0 0 0 7
0 48 0 0 0 0 7
0 49 0 0 0 0 7
0 50 0 0 0 0 7
0 51 0 0 0 0 8
0 52 0 0 0 0 9
0 53 0 0 0 0 7
0 54 0 0 0 0 7
0 55 0 0 0 0 8
0 56 0 0 0 0 8
0 57 0 0 0 0 6
0 58 0 0 0 0 9
0 59 0 0 0 0 5
0 60 0 0 0 0 7
0 61 0 0 0 0 5
0 62 1 0 0 0 8
0 63 0 0 0 0 8
1 0 0 0 0 0 14
1 1 0 0 0 0 8
1 2 0 0 0 0 7
1 3 0 0 0 0 7
1 4 0 0 0 0 8
1 5 0 0 0 0 3
1 6 0 0 0 0 9
1 7 0 0 0 0 10
1 8 0 0 0 0 6
1 9 0 0 0 0 9
1 10 0 0 0 0 8
1 11 0 0 0 0 5
1 12 0 0 0 0 8
1 13 0 0 0 0 8
1 14 0 0 0 0 7
1 15 0 0 0 0 3
1 16 0 0 0 0 6
1 17 0 0 0 0 10
1 18 0 0 0 0 7
1 19 0 0 0 0 8
1 20 0 0 0 0 7
1 21 0 0 0 0 9
1 22 0 0 0 0 6
1 23 0 0 0 0 10
1 24 0 0 0 0 6
1 25 0 0 0 0 8
1 26 0 0 0 0 8
1 27 0 0 0 0 7
1 28 0 0 0 0 6
1 29 0 0 0 0 4
1 30 0 0 0 0 8
1 31 0 0 0 0 6
1 32 0 0 0 0 8
1 33 0 0 0 0 6
1 34 0 0 0 0 12
1 35 0 0 0 0 7
1 36 0 0 0 0 6
1 37 0 0 0 0 6
1 38 0 0 0 0 10
1 39 0 0 0 0 7
1 40 0 0 0 0 8
1 41 0 0 0 0 4
1 42 0 0 0 0 10
1 43 0 0 0 0 6
1 44 0 0 0 0 6
1 45 0 0 0 0 9
1 46 0 0 0 0 9
1 47 0 0 0 0 7
1 48 0 0 0 0 4
1 49 0 0 0 0 8
1 50 0 0 0 0 9
1 51 0 0 0 0 7
1 52 0 0 0 0 8
1 53 0 0 0 0 9
1 54 0 0 0 0 8
1 55 0 0 0 0 5
1 56 0 0 0 0 8
1 57 0 0 0 0 8
1 58 0 0 0 0 6
1 59 0 0 0 0 5
1 60 0 0 0 0 7
1 61 0 0 0 0 6
1 62 0 0 0 0 8
1 63 0 0 0 0 8
2 0 0 0 0 0 6
2 1 0 0 0 0 7
2 2 0 0 0 0 11
2 3 0 0 0 0 7
2 4 0 0 0 0 9
2 5 0 0 0 0 10
2 6 0 0 0 0 9
2 7 0 0 0 0 8
2 8 0 0 0 0 7
2 9 0 0 0 0 8
2 10 0 0 0 0 7
2 11 0 0 0 0 7
2 12 0 0 0 0 8
2 13 0 0 0 0 5
2 14 0 0 0 0 7
2 15 0 0 0 0 6
2 16 0 0 0 0 8
2 17 0 0 0 0 8
2 18 0 0 0 0 8
2 19 0 0 0 0 8
2 20 0 0 0 0 8
2 21 0 0 0 0 7
2 22 0 0 0 0 6
2 23 0 0 0 0 7
2 24 0 0 0 0 9
2 25 0 0 0 0 6
2 26 0 0 0 0 4
2 27 0 0 0 0 8
2 28 0 0 0 0 7
2 29 0 0 0 0 7
2 30 0 0 0 0 8
2 31 0 0 0 0 9
2 32 0 0 0 0 6
2 33 0 0 0 0 7
2 34 0 0 0 0 7
2 35 0 0 0 0 8
2 36 0 0 0 0 8
2 37 0 0 0 0 10
2 38 0 0 0 0 6
2 39 0 0 0 0 6
2 40 0 0 0 0 7
2 41 0 0 0 0 8
2 42 0 0 0 0 6
2 43 0 0 0 0 8
2 44 0 0 0 0 6
2 45 0 0 0 0 8
2 46 0 0 0 0 10
2 47 0 0 0 0 8
2 48 0 0 0 0 6
2 49 0 0 0 0 10
2 50 0 0 0 0 6
2 51 0 0 0 0 7
2 52 0 0 0 0 7
2 53 0 0 0 0 5
2 54 0 0 0 0 8
2 55 0 0 0 0 6
2 56 0 0 0 0 5
2 57 0 0 0 0 6
2 58 0 0 0 0 11
2 59 0 0 0 0 11
2 60 0 0 0 0 8
2 61 0 0 0 0 8
2 62 0 0 0 0 10
2 63 0 0 0 0 6
3 0 0 0 0 0 7
3 1 0 0 0 0 9
3 2 0 0 0 0 6
3 3 0 0 0 0 4
3 4 0 0 0 0 8
3 5 0 0 0 0 8
3 6 0 0 0 0 6
3 7 0 0 0 0 6
3 8 0 0 0 0 7
3 9 0 0 0 0 7
3 10 0 0 0 0 7
3 11 0 0 0 0 6
3 12 0 0 0 0 10
3 13 0 0 0 0 4
3 14 0 0 0 0 7
3 15 0 0 0 0 4
3 16 0 0 0 0 6
3 17 0 0 0 0 9
3 18 0 0 0 0 11
3 19 0 0 0 0 7
3 20 0 0 0 0 6
3 21 0 0 0 0 6
3 22 0 0 0 0 6
3 23 0 0 0 0 6
3 24 0 0 0 0 6
3 25 0 0 0 0 7
3 26 0 0 0 0 6
3 27 0 0 0 0 5
3 28 0 0 0 0 8
3 29 0 0 0 0 6
3 30 0 0 0 0 6
3 31 0 0 0 0 10
3 32 0 0 0 0 7
3 33 0 0 0 0 6
3 34 0 0 0 0 8
3 35 0 0 0 0 6
3 36 0 0 0 0 8
3 37 0 0 0 0 9
3 38 0 0 0 0 8
3 39 0 0 0 0 8
3 40 0 0 0 0 5
3 41 0 0 0 0 6
3 42 0 0 0 0 10
3 43 0 0 0 0 9
3 44 0 0 0 0 8
3 45 0 0 0 0 9
3 46 0 0 0 0 8
3 47 0 0 0 0 4
3 48 0 0 0 0 8
3 49 0 0 0 0 6
3 50 0 0 0 0 4
3 51 0 0 0 0 8
3 52 0 0 0 0 8
3 53 0 0 0 0 8
3 54 0 0 0 0 5
3 55 0 0 0 0 5
3 56 0 0 0 0 10
3 57 0 0 0 0 6
3 58 0 0 0 0 5
3 59 0 0 0 0 6
3 60 0 0 0 0 7
3 61 0 0 0 0 6
3 62 0 0 0 0 6
3 63 0 0 0 0 4
4 0 0 0 0 0 8
4 1 0 0 0 0 12
4 2 0 0 0 0 9
4 3 0 0 0 0 6
4 4 0 0 0 0 8
4 5 0 0 0 0 9
4 6 0 0 0 0 10
4 7 0 0 0 0 9
4 8 0 0 0 0 5
4 9 0 0 0 0 7
4 10 0 0 0 0 6
4 11 0 0 0 0 10
4 12 0 0 0 0 7
4 13 0 0 0 0 8
4 14 0 0 0 0 7
4 15 0 0 0 0 8
4 16 0 0 0 0 6
4 17 0 0 0 0 9
4 18 0 0 0 0 9
4 19 0 0 0 0 9
4 20 0 0 0 0 8
4 21 0 0 0 0 8
4 22 0 0 0 0 8
4 23 0 0 0 0 9
4 24 0 0 0 0 5
4 25 0 0 0 0 5
4 26 0 0 0 0 9
4 27 0 0 0 0 9
4 28 0 0 0 0 7
4 29 0 0 0 0 5
4 30 0 0 0 0 6
4 31 0 0 0 0 7
4 32 0 0 0 0 6
4 33 0 0 0 0 7
4 34 0 0 0 0 7
4 35 0 0 0 0 6
4 36 0 0 0 0 5
4 37 0 0 0 0 9
4 38 0 0 0 0 7
4 39 0 0 0 0 8
4 40 0 0 0 0 9
4 41 0 0 0 0 6
4 42 0 0 0 0 7
4 43 0 0 0 0 6
... 3796 more lines ...
Attachment 3: mpw4.conf 
[RunControl]
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER

[LogCollector.log]

[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
#PMT1_V = 0.8
#PMT2_V = 0.85
#PMT3_V = 0.8
#PMT4_V = 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000002
in0_DEL = 0
in0_STR = 0x3F
in1_DEL = 0
in1_STR = 1
in2_DEL = 0
in2_STR = 0x3F
in3_DEL = 0
in3_STR = 1
in4_DEL = 0
in4_STR = 0
in5_DEL = 0
in5_STR = 0

# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3
DACThreshold1 = -0.04
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask = 0xD

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode = 0xF1

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0xF #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1

# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc


[Producer.altel]
EUDAQ_DC = tel_dc
EUDAQ_ID = 1


[Producer.elog1]
files2log = "peary_config.cfg, matrix_mpw4_base.txt"
start_cmd = "./get_mpw4_configs.sh"


[Producer.keithleyPS]
voltage = -220
max_current = 50e-6
ramp_step = 5
ramp_speed = 100


[Producer.MuPix8]
#EUDAQ_DC = tel_dc
#lazyFrog = -25
#register_value = 0
ThPix = 144


[Producer.RD50_MPW4_0]
#voltage_key = th
#voltage_value = 1.28
#register_key = vnfb
#register_value = 36


[DataCollector.mpw4_dc]
DISABLE_PRINT = 1
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_MN = mpw4_mon
XILINX_IP = 192.168.201.1


[DataCollector.tel_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X


[DataCollector.tlu_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X


[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
  9   Mon Sep 30 19:20:19 2024 tb-crew1st tests5V W8-0E0Backside4.2 -200 Unknown30.09.2024 19:00:0630.09.2024 19:20:4320
automatic log for run 5
Comment:
Attachment 1: peary_config.cfg 
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing



[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_base.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 0


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 0.91
th__i = 3


[RD50_MPW4_Piggy]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_piggy.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 0
execute_file = execute.txt
i2c_addr = 0x47
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_piggy.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt 
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} 

# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1 
00 00 0 0 0 0 0 
00 01 0 0 0 0 0 
00 02 0 0 0 0 0 
00 03 0 0 0 0 0 
00 04 0 0 0 0 0 
00 05 0 0 0 0 0 
00 06 0 0 0 0 0 
00 07 0 0 0 0 0 
00 08 0 0 0 0 0 
00 09 0 0 0 0 0 
00 10 0 0 0 0 0 
00 11 0 0 0 0 0 
00 12 0 0 0 0 0 
00 13 0 0 0 0 0 
00 14 0 0 0 0 0 
00 15 0 0 0 0 0 
00 16 0 0 0 0 0 
00 17 0 0 0 0 11 
00 18 0 0 0 0 10 
00 19 0 0 0 0 9 
00 20 0 0 0 0 6 
00 21 0 0 0 0 5 
00 22 0 0 0 0 8 
00 23 0 0 0 0 7 
00 24 0 0 0 0 8 
00 25 0 0 0 0 5 
00 26 0 0 0 0 6 
00 27 0 0 0 0 3 
00 28 0 0 0 0 7 
00 29 0 0 0 0 7 
00 30 0 0 0 0 9 
00 31 0 0 0 0 4 
00 32 0 0 0 0 7 
00 33 0 0 0 0 6 
00 34 0 0 0 0 8 
00 35 0 0 0 0 7 
00 36 0 0 0 0 9 
00 37 0 0 0 0 7 
00 38 0 0 0 0 9 
00 39 0 0 0 0 7 
00 40 0 0 0 0 11 
00 41 0 0 0 0 6 
00 42 0 0 0 0 8 
00 43 0 0 0 0 6 
00 44 0 0 0 0 8 
00 45 0 0 0 0 10 
00 46 0 0 0 0 5 
00 47 0 0 0 0 7 
00 48 0 0 0 0 7 
00 49 0 0 0 0 7 
00 50 0 0 0 0 7 
00 51 0 0 0 0 8 
00 52 0 0 0 0 9 
00 53 0 0 0 0 7 
00 54 0 0 0 0 7 
00 55 0 0 0 0 8 
00 56 0 0 0 0 8 
00 57 0 0 0 0 6 
00 58 0 0 0 0 9 
00 59 0 0 0 0 5 
00 60 0 0 0 0 7 
00 61 0 0 0 0 5 
00 62 1 0 0 0 8 
00 63 0 0 0 0 8 
01 00 0 0 0 0 14 
01 01 0 0 0 0 8 
01 02 0 0 0 0 7 
01 03 0 0 0 0 7 
01 04 0 0 0 0 8 
01 05 0 0 0 0 3 
01 06 0 0 0 0 9 
01 07 0 0 0 0 10 
01 08 0 0 0 0 6 
01 09 0 0 0 0 9 
01 10 0 0 0 0 8 
01 11 0 0 0 0 5 
01 12 0 0 0 0 8 
01 13 0 0 0 0 8 
01 14 0 0 0 0 7 
01 15 0 0 0 0 3 
01 16 0 0 0 0 6 
01 17 0 0 0 0 10 
01 18 0 0 0 0 7 
01 19 0 0 0 0 8 
01 20 0 0 0 0 7 
01 21 0 0 0 0 9 
01 22 0 0 0 0 6 
01 23 0 0 0 0 10 
01 24 0 0 0 0 6 
01 25 0 0 0 0 8 
01 26 0 0 0 0 8 
01 27 0 0 0 0 7 
01 28 0 0 0 0 6 
01 29 0 0 0 0 4 
01 30 0 0 0 0 8 
01 31 0 0 0 0 6 
01 32 0 0 0 0 8 
01 33 0 0 0 0 6 
01 34 0 0 0 0 12 
01 35 0 0 0 0 7 
01 36 0 0 0 0 6 
01 37 0 0 0 0 6 
01 38 0 0 0 0 10 
01 39 0 0 0 0 7 
01 40 0 0 0 0 8 
01 41 0 0 0 0 4 
01 42 0 0 0 0 10 
01 43 0 0 0 0 6 
01 44 0 0 0 0 6 
01 45 0 0 0 0 9 
01 46 0 0 0 0 9 
01 47 0 0 0 0 7 
01 48 0 0 0 0 4 
01 49 0 0 0 0 8 
01 50 0 0 0 0 9 
01 51 0 0 0 0 7 
01 52 0 0 0 0 8 
01 53 0 0 0 0 9 
01 54 0 0 0 0 8 
01 55 0 0 0 0 5 
01 56 0 0 0 0 8 
01 57 0 0 0 0 8 
01 58 0 0 0 0 6 
01 59 0 0 0 0 5 
01 60 0 0 0 0 7 
01 61 0 0 0 0 6 
01 62 0 0 0 0 8 
01 63 0 0 0 0 8 
02 00 0 0 0 0 6 
02 01 0 0 0 0 7 
02 02 0 0 0 0 11 
02 03 0 0 0 0 7 
02 04 0 0 0 0 9 
02 05 0 0 0 0 10 
02 06 0 0 0 0 9 
02 07 0 0 0 0 8 
02 08 0 0 0 0 7 
02 09 0 0 0 0 8 
02 10 0 0 0 0 7 
02 11 0 0 0 0 7 
02 12 0 0 0 0 8 
02 13 0 0 0 0 5 
02 14 0 0 0 0 7 
02 15 0 0 0 0 6 
02 16 0 0 0 0 8 
02 17 0 0 0 0 8 
02 18 0 0 0 0 8 
02 19 0 0 0 0 8 
02 20 0 0 0 0 8 
02 21 0 0 0 0 7 
02 22 0 0 0 0 6 
02 23 0 0 0 0 7 
02 24 0 0 0 0 9 
02 25 0 0 0 0 6 
02 26 0 0 0 0 4 
02 27 0 0 0 0 8 
02 28 0 0 0 0 7 
02 29 0 0 0 0 7 
02 30 0 0 0 0 8 
02 31 0 0 0 0 9 
02 32 0 0 0 0 6 
02 33 0 0 0 0 7 
02 34 0 0 0 0 7 
02 35 0 0 0 0 8 
02 36 0 0 0 0 8 
02 37 0 0 0 0 10 
02 38 0 0 0 0 6 
02 39 0 0 0 0 6 
02 40 0 0 0 0 7 
02 41 0 0 0 0 8 
02 42 0 0 0 0 6 
02 43 0 0 0 0 8 
02 44 0 0 0 0 6 
02 45 0 0 0 0 8 
02 46 0 0 0 0 10 
02 47 0 0 0 0 8 
02 48 0 0 0 0 6 
02 49 0 0 0 0 10 
02 50 0 0 0 0 6 
02 51 0 0 0 0 7 
02 52 0 0 0 0 7 
02 53 0 0 0 0 5 
02 54 0 0 0 0 8 
02 55 0 0 0 0 6 
02 56 0 0 0 0 5 
02 57 0 0 0 0 6 
02 58 0 0 0 0 11 
02 59 0 0 0 0 11 
02 60 0 0 0 0 8 
02 61 0 0 0 0 8 
02 62 0 0 0 0 10 
02 63 0 0 0 0 6 
03 00 0 0 0 0 7 
03 01 0 0 0 0 9 
03 02 0 0 0 0 6 
03 03 0 0 0 0 4 
03 04 0 0 0 0 8 
03 05 0 0 0 0 8 
03 06 0 0 0 0 6 
03 07 0 0 0 0 6 
03 08 0 0 0 0 7 
03 09 0 0 0 0 7 
03 10 0 0 0 0 7 
03 11 0 0 0 0 6 
03 12 0 0 0 0 10 
03 13 0 0 0 0 4 
03 14 0 0 0 0 7 
03 15 0 0 0 0 4 
03 16 0 0 0 0 6 
03 17 0 0 0 0 9 
03 18 0 0 0 0 11 
03 19 0 0 0 0 7 
03 20 0 0 0 0 6 
03 21 0 0 0 0 6 
03 22 0 0 0 0 6 
03 23 0 0 0 0 6 
03 24 0 0 0 0 6 
03 25 0 0 0 0 7 
03 26 0 0 0 0 6 
03 27 0 0 0 0 5 
03 28 0 0 0 0 8 
03 29 0 0 0 0 6 
03 30 0 0 0 0 6 
03 31 0 0 0 0 10 
03 32 0 0 0 0 7 
03 33 0 0 0 0 6 
03 34 0 0 0 0 8 
03 35 0 0 0 0 6 
03 36 0 0 0 0 8 
03 37 0 0 0 0 9 
03 38 0 0 0 0 8 
03 39 0 0 0 0 8 
03 40 0 0 0 0 5 
03 41 0 0 0 0 6 
03 42 0 0 0 0 10 
03 43 0 0 0 0 9 
03 44 0 0 0 0 8 
03 45 0 0 0 0 9 
03 46 0 0 0 0 8 
03 47 0 0 0 0 4 
03 48 0 0 0 0 8 
03 49 0 0 0 0 6 
03 50 0 0 0 0 4 
03 51 0 0 0 0 8 
03 52 0 0 0 0 8 
03 53 0 0 0 0 8 
03 54 0 0 0 0 5 
03 55 0 0 0 0 5 
03 56 0 0 0 0 10 
03 57 0 0 0 0 6 
03 58 0 0 0 0 5 
03 59 0 0 0 0 6 
03 60 0 0 0 0 7 
03 61 0 0 0 0 6 
03 62 0 0 0 0 6 
03 63 0 0 0 0 4 
04 00 0 0 0 0 8 
04 01 0 0 0 0 12 
04 02 0 0 0 0 9 
04 03 0 0 0 0 6 
04 04 0 0 0 0 8 
04 05 0 0 0 0 9 
04 06 0 0 0 0 10 
04 07 0 0 0 0 9 
04 08 0 0 0 0 5 
04 09 0 0 0 0 7 
04 10 0 0 0 0 6 
04 11 0 0 0 0 10 
04 12 0 0 0 0 7 
04 13 0 0 0 0 8 
04 14 0 0 0 0 7 
04 15 0 0 0 0 8 
04 16 0 0 0 0 6 
04 17 0 0 0 0 9 
04 18 0 0 0 0 9 
04 19 0 0 0 0 9 
04 20 0 0 0 0 8 
04 21 0 0 0 0 8 
04 22 0 0 0 0 8 
04 23 0 0 0 0 9 
04 24 0 0 0 0 5 
04 25 0 0 0 0 5 
04 26 0 0 0 0 9 
04 27 0 0 0 0 9 
04 28 0 0 0 0 7 
04 29 0 0 0 0 5 
04 30 0 0 0 0 6 
04 31 0 0 0 0 7 
04 32 0 0 0 0 6 
04 33 0 0 0 0 7 
04 34 0 0 0 0 7 
04 35 0 0 0 0 6 
04 36 0 0 0 0 5 
04 37 0 0 0 0 9
... 3802 more lines ...
Attachment 3: mpw4.conf 
[RunControl]
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER

[LogCollector.log]

[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
#PMT1_V = 0.8
#PMT2_V = 0.85
#PMT3_V = 0.8
#PMT4_V = 0.0

## TRIGGER CONFIGURATION
trigMaskHi = 0x00000000
trigMaskLo = 0x00000002
in0_DEL = 0
in0_STR = 0x3F
in1_DEL = 0
in1_STR = 1
in2_DEL = 0
in2_STR = 0x3F
in3_DEL = 0
in3_STR = 1
in4_DEL = 0
in4_STR = 0
in5_DEL = 0
in5_STR = 0

# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3
DACThreshold1 = -0.04
DACThreshold2 = -0.04
DACThreshold3 = +0.5
DACThreshold4 = -0.12
DACThreshold5 = -0.12

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask = 0xD

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode = 0xF1

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0xF #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1

# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc


[Producer.altel]
EUDAQ_DC = tel_dc
EUDAQ_ID = 1


[Producer.elog1]
files2log = "peary_config.cfg, matrix_mpw4_base.txt"
start_cmd = "./get_mpw4_configs.sh"


[Producer.keithleyPS]
voltage = -200
max_current = 50e-6
ramp_step = 5
ramp_speed = 100


[Producer.MuPix8]
#EUDAQ_DC = tel_dc
#lazyFrog = -25
#register_value = 0
ThPix = 144


[Producer.RD50_MPW4_0]
#voltage_key = th
#voltage_value = 1.28
#register_key = vnfb
#register_value = 36


[DataCollector.mpw4_dc]
DISABLE_PRINT = 1
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_MN = mpw4_mon
XILINX_IP = 192.168.201.1


[DataCollector.tel_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X


[DataCollector.tlu_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X


[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
  10   Tue Oct 1 10:26:38 2024 tb-crew1st tests V W8-0E0Topside4.2 -200 Unknown   
first tests
  11   Tue Oct 1 10:35:23 2024 tb-crew1st tests7V W8-0E0Topside4.2 -190 Unknown01.10.2024 10:35:3601.10.2024 10:35:470
automatic log for run 7
Comment:
Attachment 1: peary_config.cfg 
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing



[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_base.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 0


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 0.91
th__i = 3


[RD50_MPW4_Piggy]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_piggy.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 0
execute_file = execute.txt
i2c_addr = 0x47
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_piggy.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt 
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} 

# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1 
00 00 0 0 0 0 0 
00 01 0 0 0 0 0 
00 02 0 0 0 0 0 
00 03 0 0 0 0 0 
00 04 0 0 0 0 0 
00 05 0 0 0 0 0 
00 06 0 0 0 0 0 
00 07 0 0 0 0 0 
00 08 0 0 0 0 0 
00 09 0 0 0 0 0 
00 10 0 0 0 0 0 
00 11 0 0 0 0 0 
00 12 0 0 0 0 0 
00 13 0 0 0 0 0 
00 14 0 0 0 0 0 
00 15 0 0 0 0 0 
00 16 0 0 0 0 0 
00 17 0 0 0 0 11 
00 18 0 0 0 0 10 
00 19 0 0 0 0 9 
00 20 0 0 0 0 6 
00 21 0 0 0 0 5 
00 22 0 0 0 0 8 
00 23 0 0 0 0 7 
00 24 0 0 0 0 8 
00 25 0 0 0 0 5 
00 26 0 0 0 0 6 
00 27 0 0 0 0 3 
00 28 0 0 0 0 7 
00 29 0 0 0 0 7 
00 30 0 0 0 0 9 
00 31 0 0 0 0 4 
00 32 0 0 0 0 7 
00 33 0 0 0 0 6 
00 34 0 0 0 0 8 
00 35 0 0 0 0 7 
00 36 0 0 0 0 9 
00 37 0 0 0 0 7 
00 38 0 0 0 0 9 
00 39 0 0 0 0 7 
00 40 0 0 0 0 11 
00 41 0 0 0 0 6 
00 42 0 0 0 0 8 
00 43 0 0 0 0 6 
00 44 0 0 0 0 8 
00 45 0 0 0 0 10 
00 46 0 0 0 0 5 
00 47 0 0 0 0 7 
00 48 0 0 0 0 7 
00 49 0 0 0 0 7 
00 50 0 0 0 0 7 
00 51 0 0 0 0 8 
00 52 0 0 0 0 9 
00 53 0 0 0 0 7 
00 54 0 0 0 0 7 
00 55 0 0 0 0 8 
00 56 0 0 0 0 8 
00 57 0 0 0 0 6 
00 58 0 0 0 0 9 
00 59 0 0 0 0 5 
00 60 0 0 0 0 7 
00 61 0 0 0 0 5 
00 62 1 0 0 0 8 
00 63 0 0 0 0 8 
01 00 0 0 0 0 14 
01 01 0 0 0 0 8 
01 02 0 0 0 0 7 
01 03 0 0 0 0 7 
01 04 0 0 0 0 8 
01 05 0 0 0 0 3 
01 06 0 0 0 0 9 
01 07 0 0 0 0 10 
01 08 0 0 0 0 6 
01 09 0 0 0 0 9 
01 10 0 0 0 0 8 
01 11 0 0 0 0 5 
01 12 0 0 0 0 8 
01 13 0 0 0 0 8 
01 14 0 0 0 0 7 
01 15 0 0 0 0 3 
01 16 0 0 0 0 6 
01 17 0 0 0 0 10 
01 18 0 0 0 0 7 
01 19 0 0 0 0 8 
01 20 0 0 0 0 7 
01 21 0 0 0 0 9 
01 22 0 0 0 0 6 
01 23 0 0 0 0 10 
01 24 0 0 0 0 6 
01 25 0 0 0 0 8 
01 26 0 0 0 0 8 
01 27 0 0 0 0 7 
01 28 0 0 0 0 6 
01 29 0 0 0 0 4 
01 30 0 0 0 0 8 
01 31 0 0 0 0 6 
01 32 0 0 0 0 8 
01 33 0 0 0 0 6 
01 34 0 0 0 0 12 
01 35 0 0 0 0 7 
01 36 0 0 0 0 6 
01 37 0 0 0 0 6 
01 38 0 0 0 0 10 
01 39 0 0 0 0 7 
01 40 0 0 0 0 8 
01 41 0 0 0 0 4 
01 42 0 0 0 0 10 
01 43 0 0 0 0 6 
01 44 0 0 0 0 6 
01 45 0 0 0 0 9 
01 46 0 0 0 0 9 
01 47 0 0 0 0 7 
01 48 0 0 0 0 4 
01 49 0 0 0 0 8 
01 50 0 0 0 0 9 
01 51 0 0 0 0 7 
01 52 0 0 0 0 8 
01 53 0 0 0 0 9 
01 54 0 0 0 0 8 
01 55 0 0 0 0 5 
01 56 0 0 0 0 8 
01 57 0 0 0 0 8 
01 58 0 0 0 0 6 
01 59 0 0 0 0 5 
01 60 0 0 0 0 7 
01 61 0 0 0 0 6 
01 62 0 0 0 0 8 
01 63 0 0 0 0 8 
02 00 0 0 0 0 6 
02 01 0 0 0 0 7 
02 02 0 0 0 0 11 
02 03 0 0 0 0 7 
02 04 0 0 0 0 9 
02 05 0 0 0 0 10 
02 06 0 0 0 0 9 
02 07 0 0 0 0 8 
02 08 0 0 0 0 7 
02 09 0 0 0 0 8 
02 10 0 0 0 0 7 
02 11 0 0 0 0 7 
02 12 0 0 0 0 8 
02 13 0 0 0 0 5 
02 14 0 0 0 0 7 
02 15 0 0 0 0 6 
02 16 0 0 0 0 8 
02 17 0 0 0 0 8 
02 18 0 0 0 0 8 
02 19 0 0 0 0 8 
02 20 0 0 0 0 8 
02 21 0 0 0 0 7 
02 22 0 0 0 0 6 
02 23 0 0 0 0 7 
02 24 0 0 0 0 9 
02 25 0 0 0 0 6 
02 26 0 0 0 0 4 
02 27 0 0 0 0 8 
02 28 0 0 0 0 7 
02 29 0 0 0 0 7 
02 30 0 0 0 0 8 
02 31 0 0 0 0 9 
02 32 0 0 0 0 6 
02 33 0 0 0 0 7 
02 34 0 0 0 0 7 
02 35 0 0 0 0 8 
02 36 0 0 0 0 8 
02 37 0 0 0 0 10 
02 38 0 0 0 0 6 
02 39 0 0 0 0 6 
02 40 0 0 0 0 7 
02 41 0 0 0 0 8 
02 42 0 0 0 0 6 
02 43 0 0 0 0 8 
02 44 0 0 0 0 6 
02 45 0 0 0 0 8 
02 46 0 0 0 0 10 
02 47 0 0 0 0 8 
02 48 0 0 0 0 6 
02 49 0 0 0 0 10 
02 50 0 0 0 0 6 
02 51 0 0 0 0 7 
02 52 0 0 0 0 7 
02 53 0 0 0 0 5 
02 54 0 0 0 0 8 
02 55 0 0 0 0 6 
02 56 0 0 0 0 5 
02 57 0 0 0 0 6 
02 58 0 0 0 0 11 
02 59 0 0 0 0 11 
02 60 0 0 0 0 8 
02 61 0 0 0 0 8 
02 62 0 0 0 0 10 
02 63 0 0 0 0 6 
03 00 0 0 0 0 7 
03 01 0 0 0 0 9 
03 02 0 0 0 0 6 
03 03 0 0 0 0 4 
03 04 0 0 0 0 8 
03 05 0 0 0 0 8 
03 06 0 0 0 0 6 
03 07 0 0 0 0 6 
03 08 0 0 0 0 7 
03 09 0 0 0 0 7 
03 10 0 0 0 0 7 
03 11 0 0 0 0 6 
03 12 0 0 0 0 10 
03 13 0 0 0 0 4 
03 14 0 0 0 0 7 
03 15 0 0 0 0 4 
03 16 0 0 0 0 6 
03 17 0 0 0 0 9 
03 18 0 0 0 0 11 
03 19 0 0 0 0 7 
03 20 0 0 0 0 6 
03 21 0 0 0 0 6 
03 22 0 0 0 0 6 
03 23 0 0 0 0 6 
03 24 0 0 0 0 6 
03 25 0 0 0 0 7 
03 26 0 0 0 0 6 
03 27 0 0 0 0 5 
03 28 0 0 0 0 8 
03 29 0 0 0 0 6 
03 30 0 0 0 0 6 
03 31 0 0 0 0 10 
03 32 0 0 0 0 7 
03 33 0 0 0 0 6 
03 34 0 0 0 0 8 
03 35 0 0 0 0 6 
03 36 0 0 0 0 8 
03 37 0 0 0 0 9 
03 38 0 0 0 0 8 
03 39 0 0 0 0 8 
03 40 0 0 0 0 5 
03 41 0 0 0 0 6 
03 42 0 0 0 0 10 
03 43 0 0 0 0 9 
03 44 0 0 0 0 8 
03 45 0 0 0 0 9 
03 46 0 0 0 0 8 
03 47 0 0 0 0 4 
03 48 0 0 0 0 8 
03 49 0 0 0 0 6 
03 50 0 0 0 0 4 
03 51 0 0 0 0 8 
03 52 0 0 0 0 8 
03 53 0 0 0 0 8 
03 54 0 0 0 0 5 
03 55 0 0 0 0 5 
03 56 0 0 0 0 10 
03 57 0 0 0 0 6 
03 58 0 0 0 0 5 
03 59 0 0 0 0 6 
03 60 0 0 0 0 7 
03 61 0 0 0 0 6 
03 62 0 0 0 0 6 
03 63 0 0 0 0 4 
04 00 0 0 0 0 8 
04 01 0 0 0 0 12 
04 02 0 0 0 0 9 
04 03 0 0 0 0 6 
04 04 0 0 0 0 8 
04 05 0 0 0 0 9 
04 06 0 0 0 0 10 
04 07 0 0 0 0 9 
04 08 0 0 0 0 5 
04 09 0 0 0 0 7 
04 10 0 0 0 0 6 
04 11 0 0 0 0 10 
04 12 0 0 0 0 7 
04 13 0 0 0 0 8 
04 14 0 0 0 0 7 
04 15 0 0 0 0 8 
04 16 0 0 0 0 6 
04 17 0 0 0 0 9 
04 18 0 0 0 0 9 
04 19 0 0 0 0 9 
04 20 0 0 0 0 8 
04 21 0 0 0 0 8 
04 22 0 0 0 0 8 
04 23 0 0 0 0 9 
04 24 0 0 0 0 5 
04 25 0 0 0 0 5 
04 26 0 0 0 0 9 
04 27 0 0 0 0 9 
04 28 0 0 0 0 7 
04 29 0 0 0 0 5 
04 30 0 0 0 0 6 
04 31 0 0 0 0 7 
04 32 0 0 0 0 6 
04 33 0 0 0 0 7 
04 34 0 0 0 0 7 
04 35 0 0 0 0 6 
04 36 0 0 0 0 5 
04 37 0 0 0 0 9
... 3802 more lines ...
Attachment 3: mpw4.conf 
[RunControl]
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER

[LogCollector.log]

[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
#PMT1_V = 0.8
#PMT2_V = 0.85
#PMT3_V = 0.8
#PMT4_V = 0.0

## TRIGGER CONFIGURATION
#trigMaskHi = 0x00000000
#trigMaskLo = 0x00000002

trigMaskHi = 0x00000001
trigMaskLo = 0x00000000

in0_DEL = 0
in0_STR = 0x3F
in1_DEL = 0
in1_STR = 1
in2_DEL = 0
in2_STR = 0x3F
in3_DEL = 0
in3_STR = 1
in4_DEL = 0
in4_STR = 0
in5_DEL = 0
in5_STR = 0

# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3
DACThreshold1 = -0.04
DACThreshold2 = -0.04
DACThreshold3 = -1.2
DACThreshold4 = -1.2
DACThreshold5 = +0.3
trigPol=0x0

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask = 0xD

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode = 0xF1

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1

# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc


[Producer.altel]
EUDAQ_DC = tel_dc
EUDAQ_ID = 1


[Producer.elog1]
files2log = "peary_config.cfg, matrix_mpw4_base.txt"
start_cmd = "./get_mpw4_configs.sh"


[Producer.keithleyPS]
voltage = -190
max_current = 50e-6
ramp_step = 5
ramp_speed = 100


[Producer.MuPix8]
#EUDAQ_DC = tel_dc
#lazyFrog = -25
#register_value = 0
ThPix = 144


[Producer.RD50_MPW4_0]
#voltage_key = th
#voltage_value = 1.28
#register_key = vnfb
#register_value = 36


[DataCollector.mpw4_dc]
DISABLE_PRINT = 1
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_MN = mpw4_mon
XILINX_IP = 192.168.201.1


[DataCollector.tel_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X


[DataCollector.tlu_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X


[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
  12   Tue Oct 1 10:47:12 2024 tb-crew1st tests10V W8-0E0Topside4.2 -190 Unknown01.10.2024 10:47:1501.10.2024 10:47:370
automatic log for run 10
Comment:
Attachment 1: peary_config.cfg 
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing



[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_base.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 0


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 0.91
th__i = 3


[RD50_MPW4_Piggy]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_piggy.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 0
execute_file = execute.txt
i2c_addr = 0x47
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_piggy.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt 
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} 

# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1 
00 00 0 0 0 0 0 
00 01 0 0 0 0 0 
00 02 0 0 0 0 0 
00 03 0 0 0 0 0 
00 04 0 0 0 0 0 
00 05 0 0 0 0 0 
00 06 0 0 0 0 0 
00 07 0 0 0 0 0 
00 08 0 0 0 0 0 
00 09 0 0 0 0 0 
00 10 0 0 0 0 0 
00 11 0 0 0 0 0 
00 12 0 0 0 0 0 
00 13 0 0 0 0 0 
00 14 0 0 0 0 0 
00 15 0 0 0 0 0 
00 16 0 0 0 0 0 
00 17 0 0 0 0 11 
00 18 0 0 0 0 10 
00 19 0 0 0 0 9 
00 20 0 0 0 0 6 
00 21 0 0 0 0 5 
00 22 0 0 0 0 8 
00 23 0 0 0 0 7 
00 24 0 0 0 0 8 
00 25 0 0 0 0 5 
00 26 0 0 0 0 6 
00 27 0 0 0 0 3 
00 28 0 0 0 0 7 
00 29 0 0 0 0 7 
00 30 0 0 0 0 9 
00 31 0 0 0 0 4 
00 32 0 0 0 0 7 
00 33 0 0 0 0 6 
00 34 0 0 0 0 8 
00 35 0 0 0 0 7 
00 36 0 0 0 0 9 
00 37 0 0 0 0 7 
00 38 0 0 0 0 9 
00 39 0 0 0 0 7 
00 40 0 0 0 0 11 
00 41 0 0 0 0 6 
00 42 0 0 0 0 8 
00 43 0 0 0 0 6 
00 44 0 0 0 0 8 
00 45 0 0 0 0 10 
00 46 0 0 0 0 5 
00 47 0 0 0 0 7 
00 48 0 0 0 0 7 
00 49 0 0 0 0 7 
00 50 0 0 0 0 7 
00 51 0 0 0 0 8 
00 52 0 0 0 0 9 
00 53 0 0 0 0 7 
00 54 0 0 0 0 7 
00 55 0 0 0 0 8 
00 56 0 0 0 0 8 
00 57 0 0 0 0 6 
00 58 0 0 0 0 9 
00 59 0 0 0 0 5 
00 60 0 0 0 0 7 
00 61 0 0 0 0 5 
00 62 1 0 0 0 8 
00 63 0 0 0 0 8 
01 00 0 0 0 0 14 
01 01 0 0 0 0 8 
01 02 0 0 0 0 7 
01 03 0 0 0 0 7 
01 04 0 0 0 0 8 
01 05 0 0 0 0 3 
01 06 0 0 0 0 9 
01 07 0 0 0 0 10 
01 08 0 0 0 0 6 
01 09 0 0 0 0 9 
01 10 0 0 0 0 8 
01 11 0 0 0 0 5 
01 12 0 0 0 0 8 
01 13 0 0 0 0 8 
01 14 0 0 0 0 7 
01 15 0 0 0 0 3 
01 16 0 0 0 0 6 
01 17 0 0 0 0 10 
01 18 0 0 0 0 7 
01 19 0 0 0 0 8 
01 20 0 0 0 0 7 
01 21 0 0 0 0 9 
01 22 0 0 0 0 6 
01 23 0 0 0 0 10 
01 24 0 0 0 0 6 
01 25 0 0 0 0 8 
01 26 0 0 0 0 8 
01 27 0 0 0 0 7 
01 28 0 0 0 0 6 
01 29 0 0 0 0 4 
01 30 0 0 0 0 8 
01 31 0 0 0 0 6 
01 32 0 0 0 0 8 
01 33 0 0 0 0 6 
01 34 0 0 0 0 12 
01 35 0 0 0 0 7 
01 36 0 0 0 0 6 
01 37 0 0 0 0 6 
01 38 0 0 0 0 10 
01 39 0 0 0 0 7 
01 40 0 0 0 0 8 
01 41 0 0 0 0 4 
01 42 0 0 0 0 10 
01 43 0 0 0 0 6 
01 44 0 0 0 0 6 
01 45 0 0 0 0 9 
01 46 0 0 0 0 9 
01 47 0 0 0 0 7 
01 48 0 0 0 0 4 
01 49 0 0 0 0 8 
01 50 0 0 0 0 9 
01 51 0 0 0 0 7 
01 52 0 0 0 0 8 
01 53 0 0 0 0 9 
01 54 0 0 0 0 8 
01 55 0 0 0 0 5 
01 56 0 0 0 0 8 
01 57 0 0 0 0 8 
01 58 0 0 0 0 6 
01 59 0 0 0 0 5 
01 60 0 0 0 0 7 
01 61 0 0 0 0 6 
01 62 0 0 0 0 8 
01 63 0 0 0 0 8 
02 00 0 0 0 0 6 
02 01 0 0 0 0 7 
02 02 0 0 0 0 11 
02 03 0 0 0 0 7 
02 04 0 0 0 0 9 
02 05 0 0 0 0 10 
02 06 0 0 0 0 9 
02 07 0 0 0 0 8 
02 08 0 0 0 0 7 
02 09 0 0 0 0 8 
02 10 0 0 0 0 7 
02 11 0 0 0 0 7 
02 12 0 0 0 0 8 
02 13 0 0 0 0 5 
02 14 0 0 0 0 7 
02 15 0 0 0 0 6 
02 16 0 0 0 0 8 
02 17 0 0 0 0 8 
02 18 0 0 0 0 8 
02 19 0 0 0 0 8 
02 20 0 0 0 0 8 
02 21 0 0 0 0 7 
02 22 0 0 0 0 6 
02 23 0 0 0 0 7 
02 24 0 0 0 0 9 
02 25 0 0 0 0 6 
02 26 0 0 0 0 4 
02 27 0 0 0 0 8 
02 28 0 0 0 0 7 
02 29 0 0 0 0 7 
02 30 0 0 0 0 8 
02 31 0 0 0 0 9 
02 32 0 0 0 0 6 
02 33 0 0 0 0 7 
02 34 0 0 0 0 7 
02 35 0 0 0 0 8 
02 36 0 0 0 0 8 
02 37 0 0 0 0 10 
02 38 0 0 0 0 6 
02 39 0 0 0 0 6 
02 40 0 0 0 0 7 
02 41 0 0 0 0 8 
02 42 0 0 0 0 6 
02 43 0 0 0 0 8 
02 44 0 0 0 0 6 
02 45 0 0 0 0 8 
02 46 0 0 0 0 10 
02 47 0 0 0 0 8 
02 48 0 0 0 0 6 
02 49 0 0 0 0 10 
02 50 0 0 0 0 6 
02 51 0 0 0 0 7 
02 52 0 0 0 0 7 
02 53 0 0 0 0 5 
02 54 0 0 0 0 8 
02 55 0 0 0 0 6 
02 56 0 0 0 0 5 
02 57 0 0 0 0 6 
02 58 0 0 0 0 11 
02 59 0 0 0 0 11 
02 60 0 0 0 0 8 
02 61 0 0 0 0 8 
02 62 0 0 0 0 10 
02 63 0 0 0 0 6 
03 00 0 0 0 0 7 
03 01 0 0 0 0 9 
03 02 0 0 0 0 6 
03 03 0 0 0 0 4 
03 04 0 0 0 0 8 
03 05 0 0 0 0 8 
03 06 0 0 0 0 6 
03 07 0 0 0 0 6 
03 08 0 0 0 0 7 
03 09 0 0 0 0 7 
03 10 0 0 0 0 7 
03 11 0 0 0 0 6 
03 12 0 0 0 0 10 
03 13 0 0 0 0 4 
03 14 0 0 0 0 7 
03 15 0 0 0 0 4 
03 16 0 0 0 0 6 
03 17 0 0 0 0 9 
03 18 0 0 0 0 11 
03 19 0 0 0 0 7 
03 20 0 0 0 0 6 
03 21 0 0 0 0 6 
03 22 0 0 0 0 6 
03 23 0 0 0 0 6 
03 24 0 0 0 0 6 
03 25 0 0 0 0 7 
03 26 0 0 0 0 6 
03 27 0 0 0 0 5 
03 28 0 0 0 0 8 
03 29 0 0 0 0 6 
03 30 0 0 0 0 6 
03 31 0 0 0 0 10 
03 32 0 0 0 0 7 
03 33 0 0 0 0 6 
03 34 0 0 0 0 8 
03 35 0 0 0 0 6 
03 36 0 0 0 0 8 
03 37 0 0 0 0 9 
03 38 0 0 0 0 8 
03 39 0 0 0 0 8 
03 40 0 0 0 0 5 
03 41 0 0 0 0 6 
03 42 0 0 0 0 10 
03 43 0 0 0 0 9 
03 44 0 0 0 0 8 
03 45 0 0 0 0 9 
03 46 0 0 0 0 8 
03 47 0 0 0 0 4 
03 48 0 0 0 0 8 
03 49 0 0 0 0 6 
03 50 0 0 0 0 4 
03 51 0 0 0 0 8 
03 52 0 0 0 0 8 
03 53 0 0 0 0 8 
03 54 0 0 0 0 5 
03 55 0 0 0 0 5 
03 56 0 0 0 0 10 
03 57 0 0 0 0 6 
03 58 0 0 0 0 5 
03 59 0 0 0 0 6 
03 60 0 0 0 0 7 
03 61 0 0 0 0 6 
03 62 0 0 0 0 6 
03 63 0 0 0 0 4 
04 00 0 0 0 0 8 
04 01 0 0 0 0 12 
04 02 0 0 0 0 9 
04 03 0 0 0 0 6 
04 04 0 0 0 0 8 
04 05 0 0 0 0 9 
04 06 0 0 0 0 10 
04 07 0 0 0 0 9 
04 08 0 0 0 0 5 
04 09 0 0 0 0 7 
04 10 0 0 0 0 6 
04 11 0 0 0 0 10 
04 12 0 0 0 0 7 
04 13 0 0 0 0 8 
04 14 0 0 0 0 7 
04 15 0 0 0 0 8 
04 16 0 0 0 0 6 
04 17 0 0 0 0 9 
04 18 0 0 0 0 9 
04 19 0 0 0 0 9 
04 20 0 0 0 0 8 
04 21 0 0 0 0 8 
04 22 0 0 0 0 8 
04 23 0 0 0 0 9 
04 24 0 0 0 0 5 
04 25 0 0 0 0 5 
04 26 0 0 0 0 9 
04 27 0 0 0 0 9 
04 28 0 0 0 0 7 
04 29 0 0 0 0 5 
04 30 0 0 0 0 6 
04 31 0 0 0 0 7 
04 32 0 0 0 0 6 
04 33 0 0 0 0 7 
04 34 0 0 0 0 7 
04 35 0 0 0 0 6 
04 36 0 0 0 0 5 
04 37 0 0 0 0 9
... 3802 more lines ...
Attachment 3: mpw4.conf 
[RunControl]
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER

[LogCollector.log]

[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
#PMT1_V = 0.8
#PMT2_V = 0.85
#PMT3_V = 0.8
#PMT4_V = 0.0

## TRIGGER CONFIGURATION
#trigMaskHi = 0x00000000
#trigMaskLo = 0x00000002

trigMaskHi = 0x00000001
trigMaskLo = 0x00000000

in0_DEL = 0
in0_STR = 0x3F
in1_DEL = 0
in1_STR = 1
in2_DEL = 0
in2_STR = 0x3F
in3_DEL = 0
in3_STR = 1
in4_DEL = 0
in4_STR = 0
in5_DEL = 0
in5_STR = 0

# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3
DACThreshold1 = -0.04
DACThreshold2 = -0.04
DACThreshold3 = -1.2
DACThreshold4 = -1.2
DACThreshold5 = +0.3
trigPol=0x0

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask = 0xD

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode = 0xF1

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1

# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc


[Producer.altel]
EUDAQ_DC = tel_dc
EUDAQ_ID = 1


[Producer.elog1]
files2log = "peary_config.cfg, matrix_mpw4_base.txt"
start_cmd = "./get_mpw4_configs.sh"


[Producer.keithleyPS]
voltage = -190
max_current = 50e-6
ramp_step = 5
ramp_speed = 100


[Producer.MuPix8]
#EUDAQ_DC = tel_dc
#lazyFrog = -25
#register_value = 0
ThPix = 144


[Producer.RD50_MPW4_0]
#voltage_key = th
#voltage_value = 1.28
#register_key = vnfb
#register_value = 36


[DataCollector.mpw4_dc]
DISABLE_PRINT = 1
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_MN = mpw4_mon
XILINX_IP = 192.168.201.1


[DataCollector.tel_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X


[DataCollector.tlu_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X


[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
  13   Tue Oct 1 10:48:28 2024 tb-crew1st tests11V W8-0E0Topside4.2 -190 Unknown01.10.2024 10:48:2301.10.2024 10:48:520
automatic log for run 11
Comment:
Attachment 1: peary_config.cfg 
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing



[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_base.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 0


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 0.91
th__i = 3


[RD50_MPW4_Piggy]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_piggy.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 0
execute_file = execute.txt
i2c_addr = 0x47
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_piggy.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt 
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} 

# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1 
00 00 0 0 0 0 0 
00 01 0 0 0 0 0 
00 02 0 0 0 0 0 
00 03 0 0 0 0 0 
00 04 0 0 0 0 0 
00 05 0 0 0 0 0 
00 06 0 0 0 0 0 
00 07 0 0 0 0 0 
00 08 0 0 0 0 0 
00 09 0 0 0 0 0 
00 10 0 0 0 0 0 
00 11 0 0 0 0 0 
00 12 0 0 0 0 0 
00 13 0 0 0 0 0 
00 14 0 0 0 0 0 
00 15 0 0 0 0 0 
00 16 0 0 0 0 0 
00 17 0 0 0 0 11 
00 18 0 0 0 0 10 
00 19 0 0 0 0 9 
00 20 0 0 0 0 6 
00 21 0 0 0 0 5 
00 22 0 0 0 0 8 
00 23 0 0 0 0 7 
00 24 0 0 0 0 8 
00 25 0 0 0 0 5 
00 26 0 0 0 0 6 
00 27 0 0 0 0 3 
00 28 0 0 0 0 7 
00 29 0 0 0 0 7 
00 30 0 0 0 0 9 
00 31 0 0 0 0 4 
00 32 0 0 0 0 7 
00 33 0 0 0 0 6 
00 34 0 0 0 0 8 
00 35 0 0 0 0 7 
00 36 0 0 0 0 9 
00 37 0 0 0 0 7 
00 38 0 0 0 0 9 
00 39 0 0 0 0 7 
00 40 0 0 0 0 11 
00 41 0 0 0 0 6 
00 42 0 0 0 0 8 
00 43 0 0 0 0 6 
00 44 0 0 0 0 8 
00 45 0 0 0 0 10 
00 46 0 0 0 0 5 
00 47 0 0 0 0 7 
00 48 0 0 0 0 7 
00 49 0 0 0 0 7 
00 50 0 0 0 0 7 
00 51 0 0 0 0 8 
00 52 0 0 0 0 9 
00 53 0 0 0 0 7 
00 54 0 0 0 0 7 
00 55 0 0 0 0 8 
00 56 0 0 0 0 8 
00 57 0 0 0 0 6 
00 58 0 0 0 0 9 
00 59 0 0 0 0 5 
00 60 0 0 0 0 7 
00 61 0 0 0 0 5 
00 62 1 0 0 0 8 
00 63 0 0 0 0 8 
01 00 0 0 0 0 14 
01 01 0 0 0 0 8 
01 02 0 0 0 0 7 
01 03 0 0 0 0 7 
01 04 0 0 0 0 8 
01 05 0 0 0 0 3 
01 06 0 0 0 0 9 
01 07 0 0 0 0 10 
01 08 0 0 0 0 6 
01 09 0 0 0 0 9 
01 10 0 0 0 0 8 
01 11 0 0 0 0 5 
01 12 0 0 0 0 8 
01 13 0 0 0 0 8 
01 14 0 0 0 0 7 
01 15 0 0 0 0 3 
01 16 0 0 0 0 6 
01 17 0 0 0 0 10 
01 18 0 0 0 0 7 
01 19 0 0 0 0 8 
01 20 0 0 0 0 7 
01 21 0 0 0 0 9 
01 22 0 0 0 0 6 
01 23 0 0 0 0 10 
01 24 0 0 0 0 6 
01 25 0 0 0 0 8 
01 26 0 0 0 0 8 
01 27 0 0 0 0 7 
01 28 0 0 0 0 6 
01 29 0 0 0 0 4 
01 30 0 0 0 0 8 
01 31 0 0 0 0 6 
01 32 0 0 0 0 8 
01 33 0 0 0 0 6 
01 34 0 0 0 0 12 
01 35 0 0 0 0 7 
01 36 0 0 0 0 6 
01 37 0 0 0 0 6 
01 38 0 0 0 0 10 
01 39 0 0 0 0 7 
01 40 0 0 0 0 8 
01 41 0 0 0 0 4 
01 42 0 0 0 0 10 
01 43 0 0 0 0 6 
01 44 0 0 0 0 6 
01 45 0 0 0 0 9 
01 46 0 0 0 0 9 
01 47 0 0 0 0 7 
01 48 0 0 0 0 4 
01 49 0 0 0 0 8 
01 50 0 0 0 0 9 
01 51 0 0 0 0 7 
01 52 0 0 0 0 8 
01 53 0 0 0 0 9 
01 54 0 0 0 0 8 
01 55 0 0 0 0 5 
01 56 0 0 0 0 8 
01 57 0 0 0 0 8 
01 58 0 0 0 0 6 
01 59 0 0 0 0 5 
01 60 0 0 0 0 7 
01 61 0 0 0 0 6 
01 62 0 0 0 0 8 
01 63 0 0 0 0 8 
02 00 0 0 0 0 6 
02 01 0 0 0 0 7 
02 02 0 0 0 0 11 
02 03 0 0 0 0 7 
02 04 0 0 0 0 9 
02 05 0 0 0 0 10 
02 06 0 0 0 0 9 
02 07 0 0 0 0 8 
02 08 0 0 0 0 7 
02 09 0 0 0 0 8 
02 10 0 0 0 0 7 
02 11 0 0 0 0 7 
02 12 0 0 0 0 8 
02 13 0 0 0 0 5 
02 14 0 0 0 0 7 
02 15 0 0 0 0 6 
02 16 0 0 0 0 8 
02 17 0 0 0 0 8 
02 18 0 0 0 0 8 
02 19 0 0 0 0 8 
02 20 0 0 0 0 8 
02 21 0 0 0 0 7 
02 22 0 0 0 0 6 
02 23 0 0 0 0 7 
02 24 0 0 0 0 9 
02 25 0 0 0 0 6 
02 26 0 0 0 0 4 
02 27 0 0 0 0 8 
02 28 0 0 0 0 7 
02 29 0 0 0 0 7 
02 30 0 0 0 0 8 
02 31 0 0 0 0 9 
02 32 0 0 0 0 6 
02 33 0 0 0 0 7 
02 34 0 0 0 0 7 
02 35 0 0 0 0 8 
02 36 0 0 0 0 8 
02 37 0 0 0 0 10 
02 38 0 0 0 0 6 
02 39 0 0 0 0 6 
02 40 0 0 0 0 7 
02 41 0 0 0 0 8 
02 42 0 0 0 0 6 
02 43 0 0 0 0 8 
02 44 0 0 0 0 6 
02 45 0 0 0 0 8 
02 46 0 0 0 0 10 
02 47 0 0 0 0 8 
02 48 0 0 0 0 6 
02 49 0 0 0 0 10 
02 50 0 0 0 0 6 
02 51 0 0 0 0 7 
02 52 0 0 0 0 7 
02 53 0 0 0 0 5 
02 54 0 0 0 0 8 
02 55 0 0 0 0 6 
02 56 0 0 0 0 5 
02 57 0 0 0 0 6 
02 58 0 0 0 0 11 
02 59 0 0 0 0 11 
02 60 0 0 0 0 8 
02 61 0 0 0 0 8 
02 62 0 0 0 0 10 
02 63 0 0 0 0 6 
03 00 0 0 0 0 7 
03 01 0 0 0 0 9 
03 02 0 0 0 0 6 
03 03 0 0 0 0 4 
03 04 0 0 0 0 8 
03 05 0 0 0 0 8 
03 06 0 0 0 0 6 
03 07 0 0 0 0 6 
03 08 0 0 0 0 7 
03 09 0 0 0 0 7 
03 10 0 0 0 0 7 
03 11 0 0 0 0 6 
03 12 0 0 0 0 10 
03 13 0 0 0 0 4 
03 14 0 0 0 0 7 
03 15 0 0 0 0 4 
03 16 0 0 0 0 6 
03 17 0 0 0 0 9 
03 18 0 0 0 0 11 
03 19 0 0 0 0 7 
03 20 0 0 0 0 6 
03 21 0 0 0 0 6 
03 22 0 0 0 0 6 
03 23 0 0 0 0 6 
03 24 0 0 0 0 6 
03 25 0 0 0 0 7 
03 26 0 0 0 0 6 
03 27 0 0 0 0 5 
03 28 0 0 0 0 8 
03 29 0 0 0 0 6 
03 30 0 0 0 0 6 
03 31 0 0 0 0 10 
03 32 0 0 0 0 7 
03 33 0 0 0 0 6 
03 34 0 0 0 0 8 
03 35 0 0 0 0 6 
03 36 0 0 0 0 8 
03 37 0 0 0 0 9 
03 38 0 0 0 0 8 
03 39 0 0 0 0 8 
03 40 0 0 0 0 5 
03 41 0 0 0 0 6 
03 42 0 0 0 0 10 
03 43 0 0 0 0 9 
03 44 0 0 0 0 8 
03 45 0 0 0 0 9 
03 46 0 0 0 0 8 
03 47 0 0 0 0 4 
03 48 0 0 0 0 8 
03 49 0 0 0 0 6 
03 50 0 0 0 0 4 
03 51 0 0 0 0 8 
03 52 0 0 0 0 8 
03 53 0 0 0 0 8 
03 54 0 0 0 0 5 
03 55 0 0 0 0 5 
03 56 0 0 0 0 10 
03 57 0 0 0 0 6 
03 58 0 0 0 0 5 
03 59 0 0 0 0 6 
03 60 0 0 0 0 7 
03 61 0 0 0 0 6 
03 62 0 0 0 0 6 
03 63 0 0 0 0 4 
04 00 0 0 0 0 8 
04 01 0 0 0 0 12 
04 02 0 0 0 0 9 
04 03 0 0 0 0 6 
04 04 0 0 0 0 8 
04 05 0 0 0 0 9 
04 06 0 0 0 0 10 
04 07 0 0 0 0 9 
04 08 0 0 0 0 5 
04 09 0 0 0 0 7 
04 10 0 0 0 0 6 
04 11 0 0 0 0 10 
04 12 0 0 0 0 7 
04 13 0 0 0 0 8 
04 14 0 0 0 0 7 
04 15 0 0 0 0 8 
04 16 0 0 0 0 6 
04 17 0 0 0 0 9 
04 18 0 0 0 0 9 
04 19 0 0 0 0 9 
04 20 0 0 0 0 8 
04 21 0 0 0 0 8 
04 22 0 0 0 0 8 
04 23 0 0 0 0 9 
04 24 0 0 0 0 5 
04 25 0 0 0 0 5 
04 26 0 0 0 0 9 
04 27 0 0 0 0 9 
04 28 0 0 0 0 7 
04 29 0 0 0 0 5 
04 30 0 0 0 0 6 
04 31 0 0 0 0 7 
04 32 0 0 0 0 6 
04 33 0 0 0 0 7 
04 34 0 0 0 0 7 
04 35 0 0 0 0 6 
04 36 0 0 0 0 5 
04 37 0 0 0 0 9
... 3802 more lines ...
Attachment 3: mpw4.conf 
[RunControl]
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER

[LogCollector.log]

[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
#PMT1_V = 0.8
#PMT2_V = 0.85
#PMT3_V = 0.8
#PMT4_V = 0.0

## TRIGGER CONFIGURATION
#trigMaskHi = 0x00000000
#trigMaskLo = 0x00000002

trigMaskHi = 0x00000001
trigMaskLo = 0x00000000

in0_DEL = 0
in0_STR = 0x3F
in1_DEL = 0
in1_STR = 1
in2_DEL = 0
in2_STR = 0x3F
in3_DEL = 0
in3_STR = 1
in4_DEL = 0
in4_STR = 0
in5_DEL = 0
in5_STR = 0

# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3
DACThreshold1 = -0.04
DACThreshold2 = -0.04
DACThreshold3 = -1.2
DACThreshold4 = -1.2
DACThreshold5 = +0.3
trigPol=0x0

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask = 0xD

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode = 0xF1

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1

# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc


[Producer.altel]
EUDAQ_DC = tel_dc
EUDAQ_ID = 1


[Producer.elog1]
files2log = "peary_config.cfg, matrix_mpw4_base.txt"
start_cmd = "./get_mpw4_configs.sh"


[Producer.keithleyPS]
voltage = -190
max_current = 50e-6
ramp_step = 5
ramp_speed = 100


[Producer.MuPix8]
#EUDAQ_DC = tel_dc
#lazyFrog = -25
#register_value = 0
ThPix = 144


[Producer.RD50_MPW4_0]
#voltage_key = th
#voltage_value = 1.28
#register_key = vnfb
#register_value = 36


[DataCollector.mpw4_dc]
DISABLE_PRINT = 1
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /media/silicon/testbeam_data/desy2404/mpw4_run$6R$X
EUDAQ_MN = mpw4_mon
XILINX_IP = 192.168.201.1


[DataCollector.tel_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X


[DataCollector.tlu_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X


[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
  14   Tue Oct 1 10:52:34 2024 tb-crew1st tests12V W8-0E0Topside4.2 -190 Unknown01.10.2024 10:52:3001.10.2024 10:52:590
automatic log for run 12
Comment:
Attachment 1: peary_config.cfg 
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing



[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_base.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 0


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 0.91
th__i = 3


[RD50_MPW4_Piggy]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_piggy.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 0
execute_file = execute.txt
i2c_addr = 0x47
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_piggy.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt 
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} 

# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1 
00 00 0 0 0 0 0 
00 01 0 0 0 0 0 
00 02 0 0 0 0 0 
00 03 0 0 0 0 0 
00 04 0 0 0 0 0 
00 05 0 0 0 0 0 
00 06 0 0 0 0 0 
00 07 0 0 0 0 0 
00 08 0 0 0 0 0 
00 09 0 0 0 0 0 
00 10 0 0 0 0 0 
00 11 0 0 0 0 0 
00 12 0 0 0 0 0 
00 13 0 0 0 0 0 
00 14 0 0 0 0 0 
00 15 0 0 0 0 0 
00 16 0 0 0 0 0 
00 17 0 0 0 0 11 
00 18 0 0 0 0 10 
00 19 0 0 0 0 9 
00 20 0 0 0 0 6 
00 21 0 0 0 0 5 
00 22 0 0 0 0 8 
00 23 0 0 0 0 7 
00 24 0 0 0 0 8 
00 25 0 0 0 0 5 
00 26 0 0 0 0 6 
00 27 0 0 0 0 3 
00 28 0 0 0 0 7 
00 29 0 0 0 0 7 
00 30 0 0 0 0 9 
00 31 0 0 0 0 4 
00 32 0 0 0 0 7 
00 33 0 0 0 0 6 
00 34 0 0 0 0 8 
00 35 0 0 0 0 7 
00 36 0 0 0 0 9 
00 37 0 0 0 0 7 
00 38 0 0 0 0 9 
00 39 0 0 0 0 7 
00 40 0 0 0 0 11 
00 41 0 0 0 0 6 
00 42 0 0 0 0 8 
00 43 0 0 0 0 6 
00 44 0 0 0 0 8 
00 45 0 0 0 0 10 
00 46 0 0 0 0 5 
00 47 0 0 0 0 7 
00 48 0 0 0 0 7 
00 49 0 0 0 0 7 
00 50 0 0 0 0 7 
00 51 0 0 0 0 8 
00 52 0 0 0 0 9 
00 53 0 0 0 0 7 
00 54 0 0 0 0 7 
00 55 0 0 0 0 8 
00 56 0 0 0 0 8 
00 57 0 0 0 0 6 
00 58 0 0 0 0 9 
00 59 0 0 0 0 5 
00 60 0 0 0 0 7 
00 61 0 0 0 0 5 
00 62 1 0 0 0 8 
00 63 0 0 0 0 8 
01 00 0 0 0 0 14 
01 01 0 0 0 0 8 
01 02 0 0 0 0 7 
01 03 0 0 0 0 7 
01 04 0 0 0 0 8 
01 05 0 0 0 0 3 
01 06 0 0 0 0 9 
01 07 0 0 0 0 10 
01 08 0 0 0 0 6 
01 09 0 0 0 0 9 
01 10 0 0 0 0 8 
01 11 0 0 0 0 5 
01 12 0 0 0 0 8 
01 13 0 0 0 0 8 
01 14 0 0 0 0 7 
01 15 0 0 0 0 3 
01 16 0 0 0 0 6 
01 17 0 0 0 0 10 
01 18 0 0 0 0 7 
01 19 0 0 0 0 8 
01 20 0 0 0 0 7 
01 21 0 0 0 0 9 
01 22 0 0 0 0 6 
01 23 0 0 0 0 10 
01 24 0 0 0 0 6 
01 25 0 0 0 0 8 
01 26 0 0 0 0 8 
01 27 0 0 0 0 7 
01 28 0 0 0 0 6 
01 29 0 0 0 0 4 
01 30 0 0 0 0 8 
01 31 0 0 0 0 6 
01 32 0 0 0 0 8 
01 33 0 0 0 0 6 
01 34 0 0 0 0 12 
01 35 0 0 0 0 7 
01 36 0 0 0 0 6 
01 37 0 0 0 0 6 
01 38 0 0 0 0 10 
01 39 0 0 0 0 7 
01 40 0 0 0 0 8 
01 41 0 0 0 0 4 
01 42 0 0 0 0 10 
01 43 0 0 0 0 6 
01 44 0 0 0 0 6 
01 45 0 0 0 0 9 
01 46 0 0 0 0 9 
01 47 0 0 0 0 7 
01 48 0 0 0 0 4 
01 49 0 0 0 0 8 
01 50 0 0 0 0 9 
01 51 0 0 0 0 7 
01 52 0 0 0 0 8 
01 53 0 0 0 0 9 
01 54 0 0 0 0 8 
01 55 0 0 0 0 5 
01 56 0 0 0 0 8 
01 57 0 0 0 0 8 
01 58 0 0 0 0 6 
01 59 0 0 0 0 5 
01 60 0 0 0 0 7 
01 61 0 0 0 0 6 
01 62 0 0 0 0 8 
01 63 0 0 0 0 8 
02 00 0 0 0 0 6 
02 01 0 0 0 0 7 
02 02 0 0 0 0 11 
02 03 0 0 0 0 7 
02 04 0 0 0 0 9 
02 05 0 0 0 0 10 
02 06 0 0 0 0 9 
02 07 0 0 0 0 8 
02 08 0 0 0 0 7 
02 09 0 0 0 0 8 
02 10 0 0 0 0 7 
02 11 0 0 0 0 7 
02 12 0 0 0 0 8 
02 13 0 0 0 0 5 
02 14 0 0 0 0 7 
02 15 0 0 0 0 6 
02 16 0 0 0 0 8 
02 17 0 0 0 0 8 
02 18 0 0 0 0 8 
02 19 0 0 0 0 8 
02 20 0 0 0 0 8 
02 21 0 0 0 0 7 
02 22 0 0 0 0 6 
02 23 0 0 0 0 7 
02 24 0 0 0 0 9 
02 25 0 0 0 0 6 
02 26 0 0 0 0 4 
02 27 0 0 0 0 8 
02 28 0 0 0 0 7 
02 29 0 0 0 0 7 
02 30 0 0 0 0 8 
02 31 0 0 0 0 9 
02 32 0 0 0 0 6 
02 33 0 0 0 0 7 
02 34 0 0 0 0 7 
02 35 0 0 0 0 8 
02 36 0 0 0 0 8 
02 37 0 0 0 0 10 
02 38 0 0 0 0 6 
02 39 0 0 0 0 6 
02 40 0 0 0 0 7 
02 41 0 0 0 0 8 
02 42 0 0 0 0 6 
02 43 0 0 0 0 8 
02 44 0 0 0 0 6 
02 45 0 0 0 0 8 
02 46 0 0 0 0 10 
02 47 0 0 0 0 8 
02 48 0 0 0 0 6 
02 49 0 0 0 0 10 
02 50 0 0 0 0 6 
02 51 0 0 0 0 7 
02 52 0 0 0 0 7 
02 53 0 0 0 0 5 
02 54 0 0 0 0 8 
02 55 0 0 0 0 6 
02 56 0 0 0 0 5 
02 57 0 0 0 0 6 
02 58 0 0 0 0 11 
02 59 0 0 0 0 11 
02 60 0 0 0 0 8 
02 61 0 0 0 0 8 
02 62 0 0 0 0 10 
02 63 0 0 0 0 6 
03 00 0 0 0 0 7 
03 01 0 0 0 0 9 
03 02 0 0 0 0 6 
03 03 0 0 0 0 4 
03 04 0 0 0 0 8 
03 05 0 0 0 0 8 
03 06 0 0 0 0 6 
03 07 0 0 0 0 6 
03 08 0 0 0 0 7 
03 09 0 0 0 0 7 
03 10 0 0 0 0 7 
03 11 0 0 0 0 6 
03 12 0 0 0 0 10 
03 13 0 0 0 0 4 
03 14 0 0 0 0 7 
03 15 0 0 0 0 4 
03 16 0 0 0 0 6 
03 17 0 0 0 0 9 
03 18 0 0 0 0 11 
03 19 0 0 0 0 7 
03 20 0 0 0 0 6 
03 21 0 0 0 0 6 
03 22 0 0 0 0 6 
03 23 0 0 0 0 6 
03 24 0 0 0 0 6 
03 25 0 0 0 0 7 
03 26 0 0 0 0 6 
03 27 0 0 0 0 5 
03 28 0 0 0 0 8 
03 29 0 0 0 0 6 
03 30 0 0 0 0 6 
03 31 0 0 0 0 10 
03 32 0 0 0 0 7 
03 33 0 0 0 0 6 
03 34 0 0 0 0 8 
03 35 0 0 0 0 6 
03 36 0 0 0 0 8 
03 37 0 0 0 0 9 
03 38 0 0 0 0 8 
03 39 0 0 0 0 8 
03 40 0 0 0 0 5 
03 41 0 0 0 0 6 
03 42 0 0 0 0 10 
03 43 0 0 0 0 9 
03 44 0 0 0 0 8 
03 45 0 0 0 0 9 
03 46 0 0 0 0 8 
03 47 0 0 0 0 4 
03 48 0 0 0 0 8 
03 49 0 0 0 0 6 
03 50 0 0 0 0 4 
03 51 0 0 0 0 8 
03 52 0 0 0 0 8 
03 53 0 0 0 0 8 
03 54 0 0 0 0 5 
03 55 0 0 0 0 5 
03 56 0 0 0 0 10 
03 57 0 0 0 0 6 
03 58 0 0 0 0 5 
03 59 0 0 0 0 6 
03 60 0 0 0 0 7 
03 61 0 0 0 0 6 
03 62 0 0 0 0 6 
03 63 0 0 0 0 4 
04 00 0 0 0 0 8 
04 01 0 0 0 0 12 
04 02 0 0 0 0 9 
04 03 0 0 0 0 6 
04 04 0 0 0 0 8 
04 05 0 0 0 0 9 
04 06 0 0 0 0 10 
04 07 0 0 0 0 9 
04 08 0 0 0 0 5 
04 09 0 0 0 0 7 
04 10 0 0 0 0 6 
04 11 0 0 0 0 10 
04 12 0 0 0 0 7 
04 13 0 0 0 0 8 
04 14 0 0 0 0 7 
04 15 0 0 0 0 8 
04 16 0 0 0 0 6 
04 17 0 0 0 0 9 
04 18 0 0 0 0 9 
04 19 0 0 0 0 9 
04 20 0 0 0 0 8 
04 21 0 0 0 0 8 
04 22 0 0 0 0 8 
04 23 0 0 0 0 9 
04 24 0 0 0 0 5 
04 25 0 0 0 0 5 
04 26 0 0 0 0 9 
04 27 0 0 0 0 9 
04 28 0 0 0 0 7 
04 29 0 0 0 0 5 
04 30 0 0 0 0 6 
04 31 0 0 0 0 7 
04 32 0 0 0 0 6 
04 33 0 0 0 0 7 
04 34 0 0 0 0 7 
04 35 0 0 0 0 6 
04 36 0 0 0 0 5 
04 37 0 0 0 0 9
... 3802 more lines ...
Attachment 3: mpw4.conf 
[RunControl]
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER

[LogCollector.log]

[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
#PMT1_V = 0.8
#PMT2_V = 0.85
#PMT3_V = 0.8
#PMT4_V = 0.0

## TRIGGER CONFIGURATION
#trigMaskHi = 0x00000000
#trigMaskLo = 0x00000002

trigMaskHi = 0x00000001
trigMaskLo = 0x00000000

in0_DEL = 0
in0_STR = 0x3F
in1_DEL = 0
in1_STR = 1
in2_DEL = 0
in2_STR = 0x3F
in3_DEL = 0
in3_STR = 1
in4_DEL = 0
in4_STR = 0
in5_DEL = 0
in5_STR = 0

# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3
DACThreshold1 = -0.04
DACThreshold2 = -0.04
DACThreshold3 = -1.2
DACThreshold4 = -1.2
DACThreshold5 = +0.3
trigPol=0x0

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask = 0xD

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode = 0xF1

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1

# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc


[Producer.altel]
EUDAQ_DC = tel_dc
EUDAQ_ID = 1


[Producer.elog1]
files2log = "peary_config.cfg, matrix_mpw4_base.txt"
start_cmd = "./get_mpw4_configs.sh"


[Producer.keithleyPS]
voltage = -190
max_current = 50e-6
ramp_step = 5
ramp_speed = 100


[Producer.MuPix8]
#EUDAQ_DC = tel_dc
#lazyFrog = -25
#register_value = 0
ThPix = 144


[Producer.RD50_MPW4_0]
#voltage_key = th
#voltage_value = 1.28
#register_key = vnfb
#register_value = 36


[DataCollector.mpw4_dc]
DISABLE_PRINT = 1
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X
EUDAQ_MN = mpw4_mon
XILINX_IP = 192.168.201.1


[DataCollector.tel_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X


[DataCollector.tlu_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X


[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
  15   Tue Oct 1 10:55:07 2024 tb-crew1st tests13V W8-0E0Topside4.20.94-190 Unknown01.10.2024 10:54:0201.10.2024 10:55:311
automatic log for run 13
Comment:
Attachment 1: peary_config.cfg 
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing



[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_base.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 0


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 0.91
th__i = 3


[RD50_MPW4_Piggy]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_piggy.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 0
execute_file = execute.txt
i2c_addr = 0x47
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_piggy.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt 
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} 

# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1 
00 00 0 0 0 0 0 
00 01 0 0 0 0 0 
00 02 0 0 0 0 0 
00 03 0 0 0 0 0 
00 04 0 0 0 0 0 
00 05 0 0 0 0 0 
00 06 0 0 0 0 0 
00 07 0 0 0 0 0 
00 08 0 0 0 0 0 
00 09 0 0 0 0 0 
00 10 0 0 0 0 0 
00 11 0 0 0 0 0 
00 12 0 0 0 0 0 
00 13 0 0 0 0 0 
00 14 0 0 0 0 0 
00 15 0 0 0 0 0 
00 16 0 0 0 0 0 
00 17 0 0 0 0 11 
00 18 0 0 0 0 10 
00 19 0 0 0 0 9 
00 20 0 0 0 0 6 
00 21 0 0 0 0 5 
00 22 0 0 0 0 8 
00 23 0 0 0 0 7 
00 24 0 0 0 0 8 
00 25 0 0 0 0 5 
00 26 0 0 0 0 6 
00 27 0 0 0 0 3 
00 28 0 0 0 0 7 
00 29 0 0 0 0 7 
00 30 0 0 0 0 9 
00 31 0 0 0 0 4 
00 32 0 0 0 0 7 
00 33 0 0 0 0 6 
00 34 0 0 0 0 8 
00 35 0 0 0 0 7 
00 36 0 0 0 0 9 
00 37 0 0 0 0 7 
00 38 0 0 0 0 9 
00 39 0 0 0 0 7 
00 40 0 0 0 0 11 
00 41 0 0 0 0 6 
00 42 0 0 0 0 8 
00 43 0 0 0 0 6 
00 44 0 0 0 0 8 
00 45 0 0 0 0 10 
00 46 0 0 0 0 5 
00 47 0 0 0 0 7 
00 48 0 0 0 0 7 
00 49 0 0 0 0 7 
00 50 0 0 0 0 7 
00 51 0 0 0 0 8 
00 52 0 0 0 0 9 
00 53 0 0 0 0 7 
00 54 0 0 0 0 7 
00 55 0 0 0 0 8 
00 56 0 0 0 0 8 
00 57 0 0 0 0 6 
00 58 0 0 0 0 9 
00 59 0 0 0 0 5 
00 60 0 0 0 0 7 
00 61 0 0 0 0 5 
00 62 1 0 0 0 8 
00 63 0 0 0 0 8 
01 00 0 0 0 0 14 
01 01 0 0 0 0 8 
01 02 0 0 0 0 7 
01 03 0 0 0 0 7 
01 04 0 0 0 0 8 
01 05 0 0 0 0 3 
01 06 0 0 0 0 9 
01 07 0 0 0 0 10 
01 08 0 0 0 0 6 
01 09 0 0 0 0 9 
01 10 0 0 0 0 8 
01 11 0 0 0 0 5 
01 12 0 0 0 0 8 
01 13 0 0 0 0 8 
01 14 0 0 0 0 7 
01 15 0 0 0 0 3 
01 16 0 0 0 0 6 
01 17 0 0 0 0 10 
01 18 0 0 0 0 7 
01 19 0 0 0 0 8 
01 20 0 0 0 0 7 
01 21 0 0 0 0 9 
01 22 0 0 0 0 6 
01 23 0 0 0 0 10 
01 24 0 0 0 0 6 
01 25 0 0 0 0 8 
01 26 0 0 0 0 8 
01 27 0 0 0 0 7 
01 28 0 0 0 0 6 
01 29 0 0 0 0 4 
01 30 0 0 0 0 8 
01 31 0 0 0 0 6 
01 32 0 0 0 0 8 
01 33 0 0 0 0 6 
01 34 0 0 0 0 12 
01 35 0 0 0 0 7 
01 36 0 0 0 0 6 
01 37 0 0 0 0 6 
01 38 0 0 0 0 10 
01 39 0 0 0 0 7 
01 40 0 0 0 0 8 
01 41 0 0 0 0 4 
01 42 0 0 0 0 10 
01 43 0 0 0 0 6 
01 44 0 0 0 0 6 
01 45 0 0 0 0 9 
01 46 0 0 0 0 9 
01 47 0 0 0 0 7 
01 48 0 0 0 0 4 
01 49 0 0 0 0 8 
01 50 0 0 0 0 9 
01 51 0 0 0 0 7 
01 52 0 0 0 0 8 
01 53 0 0 0 0 9 
01 54 0 0 0 0 8 
01 55 0 0 0 0 5 
01 56 0 0 0 0 8 
01 57 0 0 0 0 8 
01 58 0 0 0 0 6 
01 59 0 0 0 0 5 
01 60 0 0 0 0 7 
01 61 0 0 0 0 6 
01 62 0 0 0 0 8 
01 63 0 0 0 0 8 
02 00 0 0 0 0 6 
02 01 0 0 0 0 7 
02 02 0 0 0 0 11 
02 03 0 0 0 0 7 
02 04 0 0 0 0 9 
02 05 0 0 0 0 10 
02 06 0 0 0 0 9 
02 07 0 0 0 0 8 
02 08 0 0 0 0 7 
02 09 0 0 0 0 8 
02 10 0 0 0 0 7 
02 11 0 0 0 0 7 
02 12 0 0 0 0 8 
02 13 0 0 0 0 5 
02 14 0 0 0 0 7 
02 15 0 0 0 0 6 
02 16 0 0 0 0 8 
02 17 0 0 0 0 8 
02 18 0 0 0 0 8 
02 19 0 0 0 0 8 
02 20 0 0 0 0 8 
02 21 0 0 0 0 7 
02 22 0 0 0 0 6 
02 23 0 0 0 0 7 
02 24 0 0 0 0 9 
02 25 0 0 0 0 6 
02 26 0 0 0 0 4 
02 27 0 0 0 0 8 
02 28 0 0 0 0 7 
02 29 0 0 0 0 7 
02 30 0 0 0 0 8 
02 31 0 0 0 0 9 
02 32 0 0 0 0 6 
02 33 0 0 0 0 7 
02 34 0 0 0 0 7 
02 35 0 0 0 0 8 
02 36 0 0 0 0 8 
02 37 0 0 0 0 10 
02 38 0 0 0 0 6 
02 39 0 0 0 0 6 
02 40 0 0 0 0 7 
02 41 0 0 0 0 8 
02 42 0 0 0 0 6 
02 43 0 0 0 0 8 
02 44 0 0 0 0 6 
02 45 0 0 0 0 8 
02 46 0 0 0 0 10 
02 47 0 0 0 0 8 
02 48 0 0 0 0 6 
02 49 0 0 0 0 10 
02 50 0 0 0 0 6 
02 51 0 0 0 0 7 
02 52 0 0 0 0 7 
02 53 0 0 0 0 5 
02 54 0 0 0 0 8 
02 55 0 0 0 0 6 
02 56 0 0 0 0 5 
02 57 0 0 0 0 6 
02 58 0 0 0 0 11 
02 59 0 0 0 0 11 
02 60 0 0 0 0 8 
02 61 0 0 0 0 8 
02 62 0 0 0 0 10 
02 63 0 0 0 0 6 
03 00 0 0 0 0 7 
03 01 0 0 0 0 9 
03 02 0 0 0 0 6 
03 03 0 0 0 0 4 
03 04 0 0 0 0 8 
03 05 0 0 0 0 8 
03 06 0 0 0 0 6 
03 07 0 0 0 0 6 
03 08 0 0 0 0 7 
03 09 0 0 0 0 7 
03 10 0 0 0 0 7 
03 11 0 0 0 0 6 
03 12 0 0 0 0 10 
03 13 0 0 0 0 4 
03 14 0 0 0 0 7 
03 15 0 0 0 0 4 
03 16 0 0 0 0 6 
03 17 0 0 0 0 9 
03 18 0 0 0 0 11 
03 19 0 0 0 0 7 
03 20 0 0 0 0 6 
03 21 0 0 0 0 6 
03 22 0 0 0 0 6 
03 23 0 0 0 0 6 
03 24 0 0 0 0 6 
03 25 0 0 0 0 7 
03 26 0 0 0 0 6 
03 27 0 0 0 0 5 
03 28 0 0 0 0 8 
03 29 0 0 0 0 6 
03 30 0 0 0 0 6 
03 31 0 0 0 0 10 
03 32 0 0 0 0 7 
03 33 0 0 0 0 6 
03 34 0 0 0 0 8 
03 35 0 0 0 0 6 
03 36 0 0 0 0 8 
03 37 0 0 0 0 9 
03 38 0 0 0 0 8 
03 39 0 0 0 0 8 
03 40 0 0 0 0 5 
03 41 0 0 0 0 6 
03 42 0 0 0 0 10 
03 43 0 0 0 0 9 
03 44 0 0 0 0 8 
03 45 0 0 0 0 9 
03 46 0 0 0 0 8 
03 47 0 0 0 0 4 
03 48 0 0 0 0 8 
03 49 0 0 0 0 6 
03 50 0 0 0 0 4 
03 51 0 0 0 0 8 
03 52 0 0 0 0 8 
03 53 0 0 0 0 8 
03 54 0 0 0 0 5 
03 55 0 0 0 0 5 
03 56 0 0 0 0 10 
03 57 0 0 0 0 6 
03 58 0 0 0 0 5 
03 59 0 0 0 0 6 
03 60 0 0 0 0 7 
03 61 0 0 0 0 6 
03 62 0 0 0 0 6 
03 63 0 0 0 0 4 
04 00 0 0 0 0 8 
04 01 0 0 0 0 12 
04 02 0 0 0 0 9 
04 03 0 0 0 0 6 
04 04 0 0 0 0 8 
04 05 0 0 0 0 9 
04 06 0 0 0 0 10 
04 07 0 0 0 0 9 
04 08 0 0 0 0 5 
04 09 0 0 0 0 7 
04 10 0 0 0 0 6 
04 11 0 0 0 0 10 
04 12 0 0 0 0 7 
04 13 0 0 0 0 8 
04 14 0 0 0 0 7 
04 15 0 0 0 0 8 
04 16 0 0 0 0 6 
04 17 0 0 0 0 9 
04 18 0 0 0 0 9 
04 19 0 0 0 0 9 
04 20 0 0 0 0 8 
04 21 0 0 0 0 8 
04 22 0 0 0 0 8 
04 23 0 0 0 0 9 
04 24 0 0 0 0 5 
04 25 0 0 0 0 5 
04 26 0 0 0 0 9 
04 27 0 0 0 0 9 
04 28 0 0 0 0 7 
04 29 0 0 0 0 5 
04 30 0 0 0 0 6 
04 31 0 0 0 0 7 
04 32 0 0 0 0 6 
04 33 0 0 0 0 7 
04 34 0 0 0 0 7 
04 35 0 0 0 0 6 
04 36 0 0 0 0 5 
04 37 0 0 0 0 9
... 3802 more lines ...
Attachment 3: mpw4.conf 
[RunControl]
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER

[LogCollector.log]

[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
#PMT1_V = 0.8
#PMT2_V = 0.85
#PMT3_V = 0.8
#PMT4_V = 0.0

## TRIGGER CONFIGURATION
#trigMaskHi = 0x00000000
#trigMaskLo = 0x00000002

trigMaskHi = 0x00000001
trigMaskLo = 0x00000000

in0_DEL = 0
in0_STR = 0x3F
in1_DEL = 0
in1_STR = 1
in2_DEL = 0
in2_STR = 0x3F
in3_DEL = 0
in3_STR = 1
in4_DEL = 0
in4_STR = 0
in5_DEL = 0
in5_STR = 0

# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3
DACThreshold1 = -0.04
DACThreshold2 = -0.04
DACThreshold3 = -1.2
DACThreshold4 = -1.2
DACThreshold5 = +0.3
trigPol=0x0

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask = 0xD

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode = 0xF1

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1

# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc


[Producer.altel]
EUDAQ_DC = tel_dc
EUDAQ_ID = 1


[Producer.elog1]
files2log = "peary_config.cfg, matrix_mpw4_base.txt"
start_cmd = "./get_mpw4_configs.sh"


[Producer.keithleyPS]
voltage = -190
max_current = 50e-6
ramp_step = 5
ramp_speed = 100


[Producer.MuPix8]
#EUDAQ_DC = tel_dc
#lazyFrog = -25
#register_value = 0
ThPix = 144


[Producer.RD50_MPW4_0]
voltage_key = th
voltage_value = 0.94
#register_key = vnfb
#register_value = 36


[DataCollector.mpw4_dc]
DISABLE_PRINT = 1
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X
EUDAQ_MN = mpw4_mon
XILINX_IP = 192.168.201.1


[DataCollector.tel_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X


[DataCollector.tlu_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X


[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
  16   Tue Oct 1 10:55:25 2024 tb-crew1st tests V W8-0E0Topside4.20.94-190 Unknown   
until now 100% plain bullshit
  17   Tue Oct 1 10:56:59 2024 tb-crew1st tests14V W8-0E0Topside4.20.94-190 Unknown01.10.2024 10:56:2001.10.2024 10:57:231
automatic log for run 14
Comment:
until now 100% plain bullshit
Attachment 1: peary_config.cfg 
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing



[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_base.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 0


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 0.91
th__i = 3


[RD50_MPW4_Piggy]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_piggy.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 0
execute_file = execute.txt
i2c_addr = 0x47
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_piggy.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt 
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} 

# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1 
00 00 0 0 0 0 0 
00 01 0 0 0 0 0 
00 02 0 0 0 0 0 
00 03 0 0 0 0 0 
00 04 0 0 0 0 0 
00 05 0 0 0 0 0 
00 06 0 0 0 0 0 
00 07 0 0 0 0 0 
00 08 0 0 0 0 0 
00 09 0 0 0 0 0 
00 10 0 0 0 0 0 
00 11 0 0 0 0 0 
00 12 0 0 0 0 0 
00 13 0 0 0 0 0 
00 14 0 0 0 0 0 
00 15 0 0 0 0 0 
00 16 0 0 0 0 0 
00 17 0 0 0 0 11 
00 18 0 0 0 0 10 
00 19 0 0 0 0 9 
00 20 0 0 0 0 6 
00 21 0 0 0 0 5 
00 22 0 0 0 0 8 
00 23 0 0 0 0 7 
00 24 0 0 0 0 8 
00 25 0 0 0 0 5 
00 26 0 0 0 0 6 
00 27 0 0 0 0 3 
00 28 0 0 0 0 7 
00 29 0 0 0 0 7 
00 30 0 0 0 0 9 
00 31 0 0 0 0 4 
00 32 0 0 0 0 7 
00 33 0 0 0 0 6 
00 34 0 0 0 0 8 
00 35 0 0 0 0 7 
00 36 0 0 0 0 9 
00 37 0 0 0 0 7 
00 38 0 0 0 0 9 
00 39 0 0 0 0 7 
00 40 0 0 0 0 11 
00 41 0 0 0 0 6 
00 42 0 0 0 0 8 
00 43 0 0 0 0 6 
00 44 0 0 0 0 8 
00 45 0 0 0 0 10 
00 46 0 0 0 0 5 
00 47 0 0 0 0 7 
00 48 0 0 0 0 7 
00 49 0 0 0 0 7 
00 50 0 0 0 0 7 
00 51 0 0 0 0 8 
00 52 0 0 0 0 9 
00 53 0 0 0 0 7 
00 54 0 0 0 0 7 
00 55 0 0 0 0 8 
00 56 0 0 0 0 8 
00 57 0 0 0 0 6 
00 58 0 0 0 0 9 
00 59 0 0 0 0 5 
00 60 0 0 0 0 7 
00 61 0 0 0 0 5 
00 62 1 0 0 0 8 
00 63 0 0 0 0 8 
01 00 0 0 0 0 14 
01 01 0 0 0 0 8 
01 02 0 0 0 0 7 
01 03 0 0 0 0 7 
01 04 0 0 0 0 8 
01 05 0 0 0 0 3 
01 06 0 0 0 0 9 
01 07 0 0 0 0 10 
01 08 0 0 0 0 6 
01 09 0 0 0 0 9 
01 10 0 0 0 0 8 
01 11 0 0 0 0 5 
01 12 0 0 0 0 8 
01 13 0 0 0 0 8 
01 14 0 0 0 0 7 
01 15 0 0 0 0 3 
01 16 0 0 0 0 6 
01 17 0 0 0 0 10 
01 18 0 0 0 0 7 
01 19 0 0 0 0 8 
01 20 0 0 0 0 7 
01 21 0 0 0 0 9 
01 22 0 0 0 0 6 
01 23 0 0 0 0 10 
01 24 0 0 0 0 6 
01 25 0 0 0 0 8 
01 26 0 0 0 0 8 
01 27 0 0 0 0 7 
01 28 0 0 0 0 6 
01 29 0 0 0 0 4 
01 30 0 0 0 0 8 
01 31 0 0 0 0 6 
01 32 0 0 0 0 8 
01 33 0 0 0 0 6 
01 34 0 0 0 0 12 
01 35 0 0 0 0 7 
01 36 0 0 0 0 6 
01 37 0 0 0 0 6 
01 38 0 0 0 0 10 
01 39 0 0 0 0 7 
01 40 0 0 0 0 8 
01 41 0 0 0 0 4 
01 42 0 0 0 0 10 
01 43 0 0 0 0 6 
01 44 0 0 0 0 6 
01 45 0 0 0 0 9 
01 46 0 0 0 0 9 
01 47 0 0 0 0 7 
01 48 0 0 0 0 4 
01 49 0 0 0 0 8 
01 50 0 0 0 0 9 
01 51 0 0 0 0 7 
01 52 0 0 0 0 8 
01 53 0 0 0 0 9 
01 54 0 0 0 0 8 
01 55 0 0 0 0 5 
01 56 0 0 0 0 8 
01 57 0 0 0 0 8 
01 58 0 0 0 0 6 
01 59 0 0 0 0 5 
01 60 0 0 0 0 7 
01 61 0 0 0 0 6 
01 62 0 0 0 0 8 
01 63 0 0 0 0 8 
02 00 0 0 0 0 6 
02 01 0 0 0 0 7 
02 02 0 0 0 0 11 
02 03 0 0 0 0 7 
02 04 0 0 0 0 9 
02 05 0 0 0 0 10 
02 06 0 0 0 0 9 
02 07 0 0 0 0 8 
02 08 0 0 0 0 7 
02 09 0 0 0 0 8 
02 10 0 0 0 0 7 
02 11 0 0 0 0 7 
02 12 0 0 0 0 8 
02 13 0 0 0 0 5 
02 14 0 0 0 0 7 
02 15 0 0 0 0 6 
02 16 0 0 0 0 8 
02 17 0 0 0 0 8 
02 18 0 0 0 0 8 
02 19 0 0 0 0 8 
02 20 0 0 0 0 8 
02 21 0 0 0 0 7 
02 22 0 0 0 0 6 
02 23 0 0 0 0 7 
02 24 0 0 0 0 9 
02 25 0 0 0 0 6 
02 26 0 0 0 0 4 
02 27 0 0 0 0 8 
02 28 0 0 0 0 7 
02 29 0 0 0 0 7 
02 30 0 0 0 0 8 
02 31 0 0 0 0 9 
02 32 0 0 0 0 6 
02 33 0 0 0 0 7 
02 34 0 0 0 0 7 
02 35 0 0 0 0 8 
02 36 0 0 0 0 8 
02 37 0 0 0 0 10 
02 38 0 0 0 0 6 
02 39 0 0 0 0 6 
02 40 0 0 0 0 7 
02 41 0 0 0 0 8 
02 42 0 0 0 0 6 
02 43 0 0 0 0 8 
02 44 0 0 0 0 6 
02 45 0 0 0 0 8 
02 46 0 0 0 0 10 
02 47 0 0 0 0 8 
02 48 0 0 0 0 6 
02 49 0 0 0 0 10 
02 50 0 0 0 0 6 
02 51 0 0 0 0 7 
02 52 0 0 0 0 7 
02 53 0 0 0 0 5 
02 54 0 0 0 0 8 
02 55 0 0 0 0 6 
02 56 0 0 0 0 5 
02 57 0 0 0 0 6 
02 58 0 0 0 0 11 
02 59 0 0 0 0 11 
02 60 0 0 0 0 8 
02 61 0 0 0 0 8 
02 62 0 0 0 0 10 
02 63 0 0 0 0 6 
03 00 0 0 0 0 7 
03 01 0 0 0 0 9 
03 02 0 0 0 0 6 
03 03 0 0 0 0 4 
03 04 0 0 0 0 8 
03 05 0 0 0 0 8 
03 06 0 0 0 0 6 
03 07 0 0 0 0 6 
03 08 0 0 0 0 7 
03 09 0 0 0 0 7 
03 10 0 0 0 0 7 
03 11 0 0 0 0 6 
03 12 0 0 0 0 10 
03 13 0 0 0 0 4 
03 14 0 0 0 0 7 
03 15 0 0 0 0 4 
03 16 0 0 0 0 6 
03 17 0 0 0 0 9 
03 18 0 0 0 0 11 
03 19 0 0 0 0 7 
03 20 0 0 0 0 6 
03 21 0 0 0 0 6 
03 22 0 0 0 0 6 
03 23 0 0 0 0 6 
03 24 0 0 0 0 6 
03 25 0 0 0 0 7 
03 26 0 0 0 0 6 
03 27 0 0 0 0 5 
03 28 0 0 0 0 8 
03 29 0 0 0 0 6 
03 30 0 0 0 0 6 
03 31 0 0 0 0 10 
03 32 0 0 0 0 7 
03 33 0 0 0 0 6 
03 34 0 0 0 0 8 
03 35 0 0 0 0 6 
03 36 0 0 0 0 8 
03 37 0 0 0 0 9 
03 38 0 0 0 0 8 
03 39 0 0 0 0 8 
03 40 0 0 0 0 5 
03 41 0 0 0 0 6 
03 42 0 0 0 0 10 
03 43 0 0 0 0 9 
03 44 0 0 0 0 8 
03 45 0 0 0 0 9 
03 46 0 0 0 0 8 
03 47 0 0 0 0 4 
03 48 0 0 0 0 8 
03 49 0 0 0 0 6 
03 50 0 0 0 0 4 
03 51 0 0 0 0 8 
03 52 0 0 0 0 8 
03 53 0 0 0 0 8 
03 54 0 0 0 0 5 
03 55 0 0 0 0 5 
03 56 0 0 0 0 10 
03 57 0 0 0 0 6 
03 58 0 0 0 0 5 
03 59 0 0 0 0 6 
03 60 0 0 0 0 7 
03 61 0 0 0 0 6 
03 62 0 0 0 0 6 
03 63 0 0 0 0 4 
04 00 0 0 0 0 8 
04 01 0 0 0 0 12 
04 02 0 0 0 0 9 
04 03 0 0 0 0 6 
04 04 0 0 0 0 8 
04 05 0 0 0 0 9 
04 06 0 0 0 0 10 
04 07 0 0 0 0 9 
04 08 0 0 0 0 5 
04 09 0 0 0 0 7 
04 10 0 0 0 0 6 
04 11 0 0 0 0 10 
04 12 0 0 0 0 7 
04 13 0 0 0 0 8 
04 14 0 0 0 0 7 
04 15 0 0 0 0 8 
04 16 0 0 0 0 6 
04 17 0 0 0 0 9 
04 18 0 0 0 0 9 
04 19 0 0 0 0 9 
04 20 0 0 0 0 8 
04 21 0 0 0 0 8 
04 22 0 0 0 0 8 
04 23 0 0 0 0 9 
04 24 0 0 0 0 5 
04 25 0 0 0 0 5 
04 26 0 0 0 0 9 
04 27 0 0 0 0 9 
04 28 0 0 0 0 7 
04 29 0 0 0 0 5 
04 30 0 0 0 0 6 
04 31 0 0 0 0 7 
04 32 0 0 0 0 6 
04 33 0 0 0 0 7 
04 34 0 0 0 0 7 
04 35 0 0 0 0 6 
04 36 0 0 0 0 5 
04 37 0 0 0 0 9
... 3802 more lines ...
Attachment 3: mpw4.conf 
[RunControl]
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER

[LogCollector.log]

[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
#PMT1_V = 0.8
#PMT2_V = 0.85
#PMT3_V = 0.8
#PMT4_V = 0.0

## TRIGGER CONFIGURATION
#trigMaskHi = 0x00000000
#trigMaskLo = 0x00000002

trigMaskHi = 0x00000001
trigMaskLo = 0x00000000

in0_DEL = 0
in0_STR = 0x3F
in1_DEL = 0
in1_STR = 1
in2_DEL = 0
in2_STR = 0x3F
in3_DEL = 0
in3_STR = 1
in4_DEL = 0
in4_STR = 0
in5_DEL = 0
in5_STR = 0

# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3
DACThreshold1 = -0.04
DACThreshold2 = -0.04
DACThreshold3 = -1.2
DACThreshold4 = -1.2
DACThreshold5 = +0.3
trigPol=0x0

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask = 0xD

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode = 0xF1

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1

# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc


[Producer.altel]
EUDAQ_DC = tel_dc
EUDAQ_ID = 1


[Producer.elog1]
files2log = "peary_config.cfg, matrix_mpw4_base.txt"
start_cmd = "./get_mpw4_configs.sh"


[Producer.keithleyPS]
voltage = -190
max_current = 50e-6
ramp_step = 5
ramp_speed = 100


[Producer.MuPix8]
#EUDAQ_DC = tel_dc
#lazyFrog = -25
#register_value = 0
ThPix = 144


[Producer.RD50_MPW4_0]
voltage_key = th
voltage_value = 0.94
#register_key = vnfb
#register_value = 36


[DataCollector.mpw4_dc]
DISABLE_PRINT = 1
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X
EUDAQ_MN = mpw4_mon
XILINX_IP = 192.168.201.1


[DataCollector.tel_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X


[DataCollector.tlu_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X


[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
  18   Tue Oct 1 10:58:08 2024 tb-crew1st tests15V W8-0E0Topside4.20.94-190 Unknown01.10.2024 10:58:2501.10.2024 10:58:320
automatic log for run 15
Comment:
until now 100% plain bullshit
Attachment 1: peary_config.cfg 
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing



[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_base.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 0


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 0.91
th__i = 3


[RD50_MPW4_Piggy]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_piggy.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 0
execute_file = execute.txt
i2c_addr = 0x47
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_piggy.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt 
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} 

# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1 
00 00 0 0 0 0 0 
00 01 0 0 0 0 0 
00 02 0 0 0 0 0 
00 03 0 0 0 0 0 
00 04 0 0 0 0 0 
00 05 0 0 0 0 0 
00 06 0 0 0 0 0 
00 07 0 0 0 0 0 
00 08 0 0 0 0 0 
00 09 0 0 0 0 0 
00 10 0 0 0 0 0 
00 11 0 0 0 0 0 
00 12 0 0 0 0 0 
00 13 0 0 0 0 0 
00 14 0 0 0 0 0 
00 15 0 0 0 0 0 
00 16 0 0 0 0 0 
00 17 0 0 0 0 11 
00 18 0 0 0 0 10 
00 19 0 0 0 0 9 
00 20 0 0 0 0 6 
00 21 0 0 0 0 5 
00 22 0 0 0 0 8 
00 23 0 0 0 0 7 
00 24 0 0 0 0 8 
00 25 0 0 0 0 5 
00 26 0 0 0 0 6 
00 27 0 0 0 0 3 
00 28 0 0 0 0 7 
00 29 0 0 0 0 7 
00 30 0 0 0 0 9 
00 31 0 0 0 0 4 
00 32 0 0 0 0 7 
00 33 0 0 0 0 6 
00 34 0 0 0 0 8 
00 35 0 0 0 0 7 
00 36 0 0 0 0 9 
00 37 0 0 0 0 7 
00 38 0 0 0 0 9 
00 39 0 0 0 0 7 
00 40 0 0 0 0 11 
00 41 0 0 0 0 6 
00 42 0 0 0 0 8 
00 43 0 0 0 0 6 
00 44 0 0 0 0 8 
00 45 0 0 0 0 10 
00 46 0 0 0 0 5 
00 47 0 0 0 0 7 
00 48 0 0 0 0 7 
00 49 0 0 0 0 7 
00 50 0 0 0 0 7 
00 51 0 0 0 0 8 
00 52 0 0 0 0 9 
00 53 0 0 0 0 7 
00 54 0 0 0 0 7 
00 55 0 0 0 0 8 
00 56 0 0 0 0 8 
00 57 0 0 0 0 6 
00 58 0 0 0 0 9 
00 59 0 0 0 0 5 
00 60 0 0 0 0 7 
00 61 0 0 0 0 5 
00 62 1 0 0 0 8 
00 63 0 0 0 0 8 
01 00 0 0 0 0 14 
01 01 0 0 0 0 8 
01 02 0 0 0 0 7 
01 03 0 0 0 0 7 
01 04 0 0 0 0 8 
01 05 0 0 0 0 3 
01 06 0 0 0 0 9 
01 07 0 0 0 0 10 
01 08 0 0 0 0 6 
01 09 0 0 0 0 9 
01 10 0 0 0 0 8 
01 11 0 0 0 0 5 
01 12 0 0 0 0 8 
01 13 0 0 0 0 8 
01 14 0 0 0 0 7 
01 15 0 0 0 0 3 
01 16 0 0 0 0 6 
01 17 0 0 0 0 10 
01 18 0 0 0 0 7 
01 19 0 0 0 0 8 
01 20 0 0 0 0 7 
01 21 0 0 0 0 9 
01 22 0 0 0 0 6 
01 23 0 0 0 0 10 
01 24 0 0 0 0 6 
01 25 0 0 0 0 8 
01 26 0 0 0 0 8 
01 27 0 0 0 0 7 
01 28 0 0 0 0 6 
01 29 0 0 0 0 4 
01 30 0 0 0 0 8 
01 31 0 0 0 0 6 
01 32 0 0 0 0 8 
01 33 0 0 0 0 6 
01 34 0 0 0 0 12 
01 35 0 0 0 0 7 
01 36 0 0 0 0 6 
01 37 0 0 0 0 6 
01 38 0 0 0 0 10 
01 39 0 0 0 0 7 
01 40 0 0 0 0 8 
01 41 0 0 0 0 4 
01 42 0 0 0 0 10 
01 43 0 0 0 0 6 
01 44 0 0 0 0 6 
01 45 0 0 0 0 9 
01 46 0 0 0 0 9 
01 47 0 0 0 0 7 
01 48 0 0 0 0 4 
01 49 0 0 0 0 8 
01 50 0 0 0 0 9 
01 51 0 0 0 0 7 
01 52 0 0 0 0 8 
01 53 0 0 0 0 9 
01 54 0 0 0 0 8 
01 55 0 0 0 0 5 
01 56 0 0 0 0 8 
01 57 0 0 0 0 8 
01 58 0 0 0 0 6 
01 59 0 0 0 0 5 
01 60 0 0 0 0 7 
01 61 0 0 0 0 6 
01 62 0 0 0 0 8 
01 63 0 0 0 0 8 
02 00 0 0 0 0 6 
02 01 0 0 0 0 7 
02 02 0 0 0 0 11 
02 03 0 0 0 0 7 
02 04 0 0 0 0 9 
02 05 0 0 0 0 10 
02 06 0 0 0 0 9 
02 07 0 0 0 0 8 
02 08 0 0 0 0 7 
02 09 0 0 0 0 8 
02 10 0 0 0 0 7 
02 11 0 0 0 0 7 
02 12 0 0 0 0 8 
02 13 0 0 0 0 5 
02 14 0 0 0 0 7 
02 15 0 0 0 0 6 
02 16 0 0 0 0 8 
02 17 0 0 0 0 8 
02 18 0 0 0 0 8 
02 19 0 0 0 0 8 
02 20 0 0 0 0 8 
02 21 0 0 0 0 7 
02 22 0 0 0 0 6 
02 23 0 0 0 0 7 
02 24 0 0 0 0 9 
02 25 0 0 0 0 6 
02 26 0 0 0 0 4 
02 27 0 0 0 0 8 
02 28 0 0 0 0 7 
02 29 0 0 0 0 7 
02 30 0 0 0 0 8 
02 31 0 0 0 0 9 
02 32 0 0 0 0 6 
02 33 0 0 0 0 7 
02 34 0 0 0 0 7 
02 35 0 0 0 0 8 
02 36 0 0 0 0 8 
02 37 0 0 0 0 10 
02 38 0 0 0 0 6 
02 39 0 0 0 0 6 
02 40 0 0 0 0 7 
02 41 0 0 0 0 8 
02 42 0 0 0 0 6 
02 43 0 0 0 0 8 
02 44 0 0 0 0 6 
02 45 0 0 0 0 8 
02 46 0 0 0 0 10 
02 47 0 0 0 0 8 
02 48 0 0 0 0 6 
02 49 0 0 0 0 10 
02 50 0 0 0 0 6 
02 51 0 0 0 0 7 
02 52 0 0 0 0 7 
02 53 0 0 0 0 5 
02 54 0 0 0 0 8 
02 55 0 0 0 0 6 
02 56 0 0 0 0 5 
02 57 0 0 0 0 6 
02 58 0 0 0 0 11 
02 59 0 0 0 0 11 
02 60 0 0 0 0 8 
02 61 0 0 0 0 8 
02 62 0 0 0 0 10 
02 63 0 0 0 0 6 
03 00 0 0 0 0 7 
03 01 0 0 0 0 9 
03 02 0 0 0 0 6 
03 03 0 0 0 0 4 
03 04 0 0 0 0 8 
03 05 0 0 0 0 8 
03 06 0 0 0 0 6 
03 07 0 0 0 0 6 
03 08 0 0 0 0 7 
03 09 0 0 0 0 7 
03 10 0 0 0 0 7 
03 11 0 0 0 0 6 
03 12 0 0 0 0 10 
03 13 0 0 0 0 4 
03 14 0 0 0 0 7 
03 15 0 0 0 0 4 
03 16 0 0 0 0 6 
03 17 0 0 0 0 9 
03 18 0 0 0 0 11 
03 19 0 0 0 0 7 
03 20 0 0 0 0 6 
03 21 0 0 0 0 6 
03 22 0 0 0 0 6 
03 23 0 0 0 0 6 
03 24 0 0 0 0 6 
03 25 0 0 0 0 7 
03 26 0 0 0 0 6 
03 27 0 0 0 0 5 
03 28 0 0 0 0 8 
03 29 0 0 0 0 6 
03 30 0 0 0 0 6 
03 31 0 0 0 0 10 
03 32 0 0 0 0 7 
03 33 0 0 0 0 6 
03 34 0 0 0 0 8 
03 35 0 0 0 0 6 
03 36 0 0 0 0 8 
03 37 0 0 0 0 9 
03 38 0 0 0 0 8 
03 39 0 0 0 0 8 
03 40 0 0 0 0 5 
03 41 0 0 0 0 6 
03 42 0 0 0 0 10 
03 43 0 0 0 0 9 
03 44 0 0 0 0 8 
03 45 0 0 0 0 9 
03 46 0 0 0 0 8 
03 47 0 0 0 0 4 
03 48 0 0 0 0 8 
03 49 0 0 0 0 6 
03 50 0 0 0 0 4 
03 51 0 0 0 0 8 
03 52 0 0 0 0 8 
03 53 0 0 0 0 8 
03 54 0 0 0 0 5 
03 55 0 0 0 0 5 
03 56 0 0 0 0 10 
03 57 0 0 0 0 6 
03 58 0 0 0 0 5 
03 59 0 0 0 0 6 
03 60 0 0 0 0 7 
03 61 0 0 0 0 6 
03 62 0 0 0 0 6 
03 63 0 0 0 0 4 
04 00 0 0 0 0 8 
04 01 0 0 0 0 12 
04 02 0 0 0 0 9 
04 03 0 0 0 0 6 
04 04 0 0 0 0 8 
04 05 0 0 0 0 9 
04 06 0 0 0 0 10 
04 07 0 0 0 0 9 
04 08 0 0 0 0 5 
04 09 0 0 0 0 7 
04 10 0 0 0 0 6 
04 11 0 0 0 0 10 
04 12 0 0 0 0 7 
04 13 0 0 0 0 8 
04 14 0 0 0 0 7 
04 15 0 0 0 0 8 
04 16 0 0 0 0 6 
04 17 0 0 0 0 9 
04 18 0 0 0 0 9 
04 19 0 0 0 0 9 
04 20 0 0 0 0 8 
04 21 0 0 0 0 8 
04 22 0 0 0 0 8 
04 23 0 0 0 0 9 
04 24 0 0 0 0 5 
04 25 0 0 0 0 5 
04 26 0 0 0 0 9 
04 27 0 0 0 0 9 
04 28 0 0 0 0 7 
04 29 0 0 0 0 5 
04 30 0 0 0 0 6 
04 31 0 0 0 0 7 
04 32 0 0 0 0 6 
04 33 0 0 0 0 7 
04 34 0 0 0 0 7 
04 35 0 0 0 0 6 
04 36 0 0 0 0 5 
04 37 0 0 0 0 9
... 3802 more lines ...
Attachment 3: mpw4.conf 
[RunControl]
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER

[LogCollector.log]

[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
#PMT1_V = 0.8
#PMT2_V = 0.85
#PMT3_V = 0.8
#PMT4_V = 0.0

## TRIGGER CONFIGURATION
#trigMaskHi = 0x00000000
#trigMaskLo = 0x00000002

trigMaskHi = 0x00000001
trigMaskLo = 0x00000000

in0_DEL = 0
in0_STR = 0x3F
in1_DEL = 0
in1_STR = 1
in2_DEL = 0
in2_STR = 0x3F
in3_DEL = 0
in3_STR = 1
in4_DEL = 0
in4_STR = 0
in5_DEL = 0
in5_STR = 0

# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3
DACThreshold1 = -0.04
DACThreshold2 = -0.04
DACThreshold3 = -1.2
DACThreshold4 = -1.2
DACThreshold5 = +0.3
trigPol=0x0

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask = 0xD

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode = 0xF1

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1

# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc


[Producer.altel]
EUDAQ_DC = tel_dc
EUDAQ_ID = 1


[Producer.elog1]
files2log = "peary_config.cfg, matrix_mpw4_base.txt"
start_cmd = "./get_mpw4_configs.sh"


[Producer.keithleyPS]
voltage = -190
max_current = 50e-6
ramp_step = 5
ramp_speed = 100


[Producer.MuPix8]
#EUDAQ_DC = tel_dc
#lazyFrog = -25
#register_value = 0
ThPix = 144


[Producer.RD50_MPW4_0]
voltage_key = th
voltage_value = 0.94
#register_key = vnfb
#register_value = 36


[DataCollector.mpw4_dc]
DISABLE_PRINT = 1
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X
EUDAQ_MN = mpw4_mon
XILINX_IP = 192.168.201.1


[DataCollector.tel_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X


[DataCollector.tlu_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X


[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
  19   Tue Oct 1 11:02:04 2024 tb-crew1st tests16V W8-0E0Topside4.20.96-190 Unknown01.10.2024 11:00:2601.10.2024 11:02:282
automatic log for run 16
Comment:
Attachment 1: peary_config.cfg 
#This config file was generated with the "MPW3_gui - Config Creator"
#Do not change comment lines like "SEC::xxx" !
#They are needed for parsing



[RD50_MPW4]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_base.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 1
execute_file = execute.txt
i2c_addr = 0x41
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_base.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 0


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
bl__u = 0.9
bl__i = 3
del_hi__u = 0.7
del_hi__i = 3
del_lo__u = 0.9
del_lo__i = 3
inj__u = 0
inj__i = 3
p1v3_vssa__u = 1.3
p1v3_vssa__i = 3
p1v8_nw_ring__u = 1.8
p1v8_nw_ring__i = 3
p1v8_vdd!__u = 1.8
p1v8_vdd!__i = 3
p1v8_vdda__u = 1.8
p1v8_vdda__i = 3
p1v8_vddc__u = 1.8
p1v8_vddc__i = 3
p1v8_vddp__u = 1.8
p1v8_vddp__i = 3
p1v8_vsensbus__u = 1.8
p1v8_vsensbus__i = 3
p2v5d__u = 2.5
p2v5d__i = 3
th__u = 0.91
th__i = 3


[RD50_MPW4_Piggy]
this_config_file = config.cfg
#SEC::MISC
calib_file = calib_piggy.txt
config_si5345 = clock_config_mpw4.txt
en_freeze = 1
en_hitbus_dcols = 
en_sfout_dcol = 0
en_tb_mode = 0
execute_file = execute.txt
i2c_addr = 0x47
i2c_dev = /dev/i2c-9
inj_t0 = 0
matrix_config = matrix_mpw4_piggy.txt


#SEC::REGISTERS
conf_reg_ts_ctrl = 2
conf_reg_ts_ini = 0
cu_ctrl = 0
en_ext_ctrl = 0
en_ser_out_dcol = 0
en_sfout_dcol = 0
fei3_pulldn = 0
fei3_read = 3
idle0 = 251
idle1 = 247
idle2 = 247
idle3 = 247
tx_ctrl = 0
vbfb = 38
vblr = 38
vn = 21
vnfb = 18
vnsensbias = 50
vnsf = 45
vpbias = 37
vpcomp = 19
vptrim = 36


#SEC::POWER
# voltages with suffix "__u", currents with "__i"
Attachment 2: matrix_mpw4_base.txt 
# Config-File of the Pixel-Matrix; generated by MPW3-Config-Creator
# each line represents the configuration of an individual pixel
# format: {row} {col} {masked} {en_inj} {en_hb} {en_sfout} {trimDAC} 

# default values (which are not printed) are:
# {row} {col} 0 0 0 0 -1 
00 00 0 0 0 0 0 
00 01 0 0 0 0 0 
00 02 0 0 0 0 0 
00 03 0 0 0 0 0 
00 04 0 0 0 0 0 
00 05 0 0 0 0 0 
00 06 0 0 0 0 0 
00 07 0 0 0 0 0 
00 08 0 0 0 0 0 
00 09 0 0 0 0 0 
00 10 0 0 0 0 0 
00 11 0 0 0 0 0 
00 12 0 0 0 0 0 
00 13 0 0 0 0 0 
00 14 0 0 0 0 0 
00 15 0 0 0 0 0 
00 16 0 0 0 0 0 
00 17 0 0 0 0 11 
00 18 0 0 0 0 10 
00 19 0 0 0 0 9 
00 20 0 0 0 0 6 
00 21 0 0 0 0 5 
00 22 0 0 0 0 8 
00 23 0 0 0 0 7 
00 24 0 0 0 0 8 
00 25 0 0 0 0 5 
00 26 0 0 0 0 6 
00 27 0 0 0 0 3 
00 28 0 0 0 0 7 
00 29 0 0 0 0 7 
00 30 0 0 0 0 9 
00 31 0 0 0 0 4 
00 32 0 0 0 0 7 
00 33 0 0 0 0 6 
00 34 0 0 0 0 8 
00 35 0 0 0 0 7 
00 36 0 0 0 0 9 
00 37 0 0 0 0 7 
00 38 0 0 0 0 9 
00 39 0 0 0 0 7 
00 40 0 0 0 0 11 
00 41 0 0 0 0 6 
00 42 0 0 0 0 8 
00 43 0 0 0 0 6 
00 44 0 0 0 0 8 
00 45 0 0 0 0 10 
00 46 0 0 0 0 5 
00 47 0 0 0 0 7 
00 48 0 0 0 0 7 
00 49 0 0 0 0 7 
00 50 0 0 0 0 7 
00 51 0 0 0 0 8 
00 52 0 0 0 0 9 
00 53 0 0 0 0 7 
00 54 0 0 0 0 7 
00 55 0 0 0 0 8 
00 56 0 0 0 0 8 
00 57 0 0 0 0 6 
00 58 0 0 0 0 9 
00 59 0 0 0 0 5 
00 60 0 0 0 0 7 
00 61 0 0 0 0 5 
00 62 1 0 0 0 8 
00 63 0 0 0 0 8 
01 00 0 0 0 0 14 
01 01 0 0 0 0 8 
01 02 0 0 0 0 7 
01 03 0 0 0 0 7 
01 04 0 0 0 0 8 
01 05 0 0 0 0 3 
01 06 0 0 0 0 9 
01 07 0 0 0 0 10 
01 08 0 0 0 0 6 
01 09 0 0 0 0 9 
01 10 0 0 0 0 8 
01 11 0 0 0 0 5 
01 12 0 0 0 0 8 
01 13 0 0 0 0 8 
01 14 0 0 0 0 7 
01 15 0 0 0 0 3 
01 16 0 0 0 0 6 
01 17 0 0 0 0 10 
01 18 0 0 0 0 7 
01 19 0 0 0 0 8 
01 20 0 0 0 0 7 
01 21 0 0 0 0 9 
01 22 0 0 0 0 6 
01 23 0 0 0 0 10 
01 24 0 0 0 0 6 
01 25 0 0 0 0 8 
01 26 0 0 0 0 8 
01 27 0 0 0 0 7 
01 28 0 0 0 0 6 
01 29 0 0 0 0 4 
01 30 0 0 0 0 8 
01 31 0 0 0 0 6 
01 32 0 0 0 0 8 
01 33 0 0 0 0 6 
01 34 0 0 0 0 12 
01 35 0 0 0 0 7 
01 36 0 0 0 0 6 
01 37 0 0 0 0 6 
01 38 0 0 0 0 10 
01 39 0 0 0 0 7 
01 40 0 0 0 0 8 
01 41 0 0 0 0 4 
01 42 0 0 0 0 10 
01 43 0 0 0 0 6 
01 44 0 0 0 0 6 
01 45 0 0 0 0 9 
01 46 0 0 0 0 9 
01 47 0 0 0 0 7 
01 48 0 0 0 0 4 
01 49 0 0 0 0 8 
01 50 0 0 0 0 9 
01 51 0 0 0 0 7 
01 52 0 0 0 0 8 
01 53 0 0 0 0 9 
01 54 0 0 0 0 8 
01 55 0 0 0 0 5 
01 56 0 0 0 0 8 
01 57 0 0 0 0 8 
01 58 0 0 0 0 6 
01 59 0 0 0 0 5 
01 60 0 0 0 0 7 
01 61 0 0 0 0 6 
01 62 0 0 0 0 8 
01 63 0 0 0 0 8 
02 00 0 0 0 0 6 
02 01 0 0 0 0 7 
02 02 0 0 0 0 11 
02 03 0 0 0 0 7 
02 04 0 0 0 0 9 
02 05 0 0 0 0 10 
02 06 0 0 0 0 9 
02 07 0 0 0 0 8 
02 08 0 0 0 0 7 
02 09 0 0 0 0 8 
02 10 0 0 0 0 7 
02 11 0 0 0 0 7 
02 12 0 0 0 0 8 
02 13 0 0 0 0 5 
02 14 0 0 0 0 7 
02 15 0 0 0 0 6 
02 16 0 0 0 0 8 
02 17 0 0 0 0 8 
02 18 0 0 0 0 8 
02 19 0 0 0 0 8 
02 20 0 0 0 0 8 
02 21 0 0 0 0 7 
02 22 0 0 0 0 6 
02 23 0 0 0 0 7 
02 24 0 0 0 0 9 
02 25 0 0 0 0 6 
02 26 0 0 0 0 4 
02 27 0 0 0 0 8 
02 28 0 0 0 0 7 
02 29 0 0 0 0 7 
02 30 0 0 0 0 8 
02 31 0 0 0 0 9 
02 32 0 0 0 0 6 
02 33 0 0 0 0 7 
02 34 0 0 0 0 7 
02 35 0 0 0 0 8 
02 36 0 0 0 0 8 
02 37 0 0 0 0 10 
02 38 0 0 0 0 6 
02 39 0 0 0 0 6 
02 40 0 0 0 0 7 
02 41 0 0 0 0 8 
02 42 0 0 0 0 6 
02 43 0 0 0 0 8 
02 44 0 0 0 0 6 
02 45 0 0 0 0 8 
02 46 0 0 0 0 10 
02 47 0 0 0 0 8 
02 48 0 0 0 0 6 
02 49 0 0 0 0 10 
02 50 0 0 0 0 6 
02 51 0 0 0 0 7 
02 52 0 0 0 0 7 
02 53 0 0 0 0 5 
02 54 0 0 0 0 8 
02 55 0 0 0 0 6 
02 56 0 0 0 0 5 
02 57 0 0 0 0 6 
02 58 0 0 0 0 11 
02 59 0 0 0 0 11 
02 60 0 0 0 0 8 
02 61 0 0 0 0 8 
02 62 0 0 0 0 10 
02 63 0 0 0 0 6 
03 00 0 0 0 0 7 
03 01 0 0 0 0 9 
03 02 0 0 0 0 6 
03 03 0 0 0 0 4 
03 04 0 0 0 0 8 
03 05 0 0 0 0 8 
03 06 0 0 0 0 6 
03 07 0 0 0 0 6 
03 08 0 0 0 0 7 
03 09 0 0 0 0 7 
03 10 0 0 0 0 7 
03 11 0 0 0 0 6 
03 12 0 0 0 0 10 
03 13 0 0 0 0 4 
03 14 0 0 0 0 7 
03 15 0 0 0 0 4 
03 16 0 0 0 0 6 
03 17 0 0 0 0 9 
03 18 0 0 0 0 11 
03 19 0 0 0 0 7 
03 20 0 0 0 0 6 
03 21 0 0 0 0 6 
03 22 0 0 0 0 6 
03 23 0 0 0 0 6 
03 24 0 0 0 0 6 
03 25 0 0 0 0 7 
03 26 0 0 0 0 6 
03 27 0 0 0 0 5 
03 28 0 0 0 0 8 
03 29 0 0 0 0 6 
03 30 0 0 0 0 6 
03 31 0 0 0 0 10 
03 32 0 0 0 0 7 
03 33 0 0 0 0 6 
03 34 0 0 0 0 8 
03 35 0 0 0 0 6 
03 36 0 0 0 0 8 
03 37 0 0 0 0 9 
03 38 0 0 0 0 8 
03 39 0 0 0 0 8 
03 40 0 0 0 0 5 
03 41 0 0 0 0 6 
03 42 0 0 0 0 10 
03 43 0 0 0 0 9 
03 44 0 0 0 0 8 
03 45 0 0 0 0 9 
03 46 0 0 0 0 8 
03 47 0 0 0 0 4 
03 48 0 0 0 0 8 
03 49 0 0 0 0 6 
03 50 0 0 0 0 4 
03 51 0 0 0 0 8 
03 52 0 0 0 0 8 
03 53 0 0 0 0 8 
03 54 0 0 0 0 5 
03 55 0 0 0 0 5 
03 56 0 0 0 0 10 
03 57 0 0 0 0 6 
03 58 0 0 0 0 5 
03 59 0 0 0 0 6 
03 60 0 0 0 0 7 
03 61 0 0 0 0 6 
03 62 0 0 0 0 6 
03 63 0 0 0 0 4 
04 00 0 0 0 0 8 
04 01 0 0 0 0 12 
04 02 0 0 0 0 9 
04 03 0 0 0 0 6 
04 04 0 0 0 0 8 
04 05 0 0 0 0 9 
04 06 0 0 0 0 10 
04 07 0 0 0 0 9 
04 08 0 0 0 0 5 
04 09 0 0 0 0 7 
04 10 0 0 0 0 6 
04 11 0 0 0 0 10 
04 12 0 0 0 0 7 
04 13 0 0 0 0 8 
04 14 0 0 0 0 7 
04 15 0 0 0 0 8 
04 16 0 0 0 0 6 
04 17 0 0 0 0 9 
04 18 0 0 0 0 9 
04 19 0 0 0 0 9 
04 20 0 0 0 0 8 
04 21 0 0 0 0 8 
04 22 0 0 0 0 8 
04 23 0 0 0 0 9 
04 24 0 0 0 0 5 
04 25 0 0 0 0 5 
04 26 0 0 0 0 9 
04 27 0 0 0 0 9 
04 28 0 0 0 0 7 
04 29 0 0 0 0 5 
04 30 0 0 0 0 6 
04 31 0 0 0 0 7 
04 32 0 0 0 0 6 
04 33 0 0 0 0 7 
04 34 0 0 0 0 7 
04 35 0 0 0 0 6 
04 36 0 0 0 0 5 
04 37 0 0 0 0 9
... 3802 more lines ...
Attachment 3: mpw4.conf 
[RunControl]
#EUDAQ_CTRL_PRODUCER_FIRST_STOP = my_pd0
#EUDAQ_CTRL_PRODUCER_LAST_START = my_pd0
#pCT_STOP_RUN_AFTER_N_SECONDS = 3000000
ADDITIONAL_DISPLAY_NUMBERS = log,_SERVER

[LogCollector.log]

[Producer.aida_tlu]
## GENERAL PARAMETERS
verbose= 1
skipconf= 0
confid= 20201311
delayStart= 200  

## HDMI CONFIGURATION
#  4-bits to determine direction of HDMI pins
HDMI1_set= 0x7 #1= output (driven by TLU), 0 = input. bit 0=CONT, 1=SPARE, 2=TRIG, 3=BUSY for eudet, Busy needs to be 0. (0b0111 = 0x7)
HDMI2_set= 0x7
HDMI3_set= 0x7
HDMI4_set= 0x7
#  Clock source (0= no clock, 1= Si5345, 2= FPGA)
HDMI1_clk = 1
HDMI2_clk = 1
HDMI3_clk = 1
HDMI4_clk = 1
#  Enable/Disable clock on differential LEMO
LEMOclk = 0

## PMT POWER CONFIGURATION
#PMT1_V = 0.8
#PMT2_V = 0.85
#PMT3_V = 0.8
#PMT4_V = 0.0

## TRIGGER CONFIGURATION
#trigMaskHi = 0x00000000
#trigMaskLo = 0x00000002

trigMaskHi = 0x00000001
trigMaskLo = 0x00000000

in0_DEL = 0
in0_STR = 0x3F
in1_DEL = 0
in1_STR = 1
in2_DEL = 0
in2_STR = 0x3F
in3_DEL = 0
in3_STR = 1
in4_DEL = 0
in4_STR = 0
in5_DEL = 0
in5_STR = 0

# Generate internal triggers (in Hz, 0= no triggers)
InternalTriggerFreq= 0 #4000 #00

## DISCRIMINATOR THRESHOLDS
DACThreshold0 = +0.3
DACThreshold1 = -0.04
DACThreshold2 = -0.04
DACThreshold3 = -1.2
DACThreshold4 = -1.2
DACThreshold5 = +0.3
trigPol=0x0

## DUT CONFIGURATION
 # DUTMask Which DUTs are on
#DUTMask= 0x3 #6 bit 0= DUT1, bit 1= DUT2, bit 2= DUT3, bit 3= DUT4
DUTMask = 0xD

 # DUTMaskMode Define AIDA (11) or EUDET (00) mode (2 bits per DUT)
DUTMaskMode = 0xF1

 # In EUDET mode: 0 = standard trigger/busy mode, 1 = raising BUSY outside handshake vetoes triggers (2 bits per DUT, 0x3= DUT 4! -backwards!)
DUTMaskModeModifier= 0x30 #0x30 #0xC0 PS: Check what this does! 0x0 würde ich hier eingeben

 # Ignore the BUSY signal for a DUT (0xF)
DUTIgnoreBusy= 0x0 #ignores triggers
DUTIgnoreShutterVeto= 0x0
EnableRecordData= 1

# EnableShutterMode: 0x0. If 1, shutter mode is enabled. If 0, shutter mode is disabled.
EnableShutterMode= 0x0
# Define which input is used for shutter source [0 - 5]
ShutterSource = 5
# 32-bit counter of clocks. Set to 0 to not use internal shutter generator.
InternalShutterInterval = 0
# 32-bit counter of clocks
ShutterOnTime = 0 #start of shutter after trigger
# 32-bit counter of clocks
ShutterVetoOffTime = 0 #time after input-trigger, until first trigger is sent to output
# 32-bit counter of clocks
ShutterOffTime = 200000000 #end of shutter after trigger #200000000 = 5s (multiples of 25ns)

## DATA COLLECTOR
EUDAQ_DC= tlu_dc


[Producer.altel]
EUDAQ_DC = tel_dc
EUDAQ_ID = 1


[Producer.elog1]
files2log = "peary_config.cfg, matrix_mpw4_base.txt"
start_cmd = "./get_mpw4_configs.sh"


[Producer.keithleyPS]
voltage = -190
max_current = 50e-6
ramp_step = 5
ramp_speed = 100


[Producer.MuPix8]
#EUDAQ_DC = tel_dc
#lazyFrog = -25
#register_value = 0
ThPix = 144


[Producer.RD50_MPW4_0]
voltage_key = th
voltage_value = 0.96
#register_key = vnfb
#register_value = 36


[DataCollector.mpw4_dc]
DISABLE_PRINT = 1
EUDAQ_DATACOL_SEND_MONITOR_FRACTION = 100
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /home/silicon/external-hd/desy2410/mpw4/mpw4_run$6R$X
EUDAQ_MN = mpw4_mon
XILINX_IP = 192.168.201.1


[DataCollector.tel_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/adenium/adenium_run$6R$X


[DataCollector.tlu_dc]
DISABLE_PRINT = 1
EUDAQ_FW = native
EUDAQ_FW_PATTERN = /data1/rd50-mpw4/oct24/tlu/tlu_run$6R$X


[Monitor.mpw4_mon]
buffer_size = 50000
update_thr = 50
  20   Tue Oct 1 11:02:45 2024 tb-crew1st tests V W8-0E0Topside4.2   Unknown   
noisy af
Goto page 1, 2, 3 ... 27, 28, 29   Next  
ELOG V3.1.5-fc6679b