Sat Jun 13 19:29:50 2015, Hao Yin, Belle II FADC (H6A), Hardware, 030, , 1, No, Good 
 |  
room temp
 
 
FIRRun002,
 
PedestalRun012, |  
   Sat Jun 13 19:26:26 2015, Hao Yin, Belle II FADC (H6A), Hardware, 030, , 3, No, Good 
 |  
room temp
 
 
FIRRun002,
 
PedestalRun012, |  
   Sat Jun 13 19:14:41 2015, Benedikt Würkner, SVD3 (H6B), L3 with FEI4, 86, 732000, 3, No, Good 
 |  
| L3 sensor at position x: 115, y: 57 hitting apvs: 1&2 on p-side and apv 3&4 on n-side |  
   Sat Jun 13 18:02:04 2015, Benedikt Würkner, SVD3 (H6B), L3 with FEI4, 85, 70000, 2, No, Good 
 |  
| L3 sensor at position x: 115, y: 47 hitting apvs: 2&3 on p-side and apv 3&4 on n-side |  
   Sat Jun 13 17:05:35 2015, Benedikt Würkner, SVD3 (H6B), L3 with FEI4, 84, 30000, 1, No, Good  
 |  
| L3 sensor at position x: 105, y: 47 hitting apvs: 2&3 on p-side and apv 3 on n-side |  
   Sat Jun 13 16:47:28 2015, Benedikt Würkner, SVD3 (H6B), Mimosa threshold with FEI4, 82, 12000, , No, Good 
 |  
Set mimosa threshold to 5 and recorded with FEI4 upstream
 
 
L3 already in sensor but not yet configured. 
 
 
Probably to noisy to help much |  
   Sat Jun 13 13:01:39 2015, Hao Yin, Belle II FADC (H6A), Hardware, 029, , 3, No, Good 
 |  
room temp
 
 
FIRRun002,
 
PedestalRun012, |  
   Sat Jun 13 10:07:36 2015, Hao Yin, Belle II FADC (H6A), Hardware, 028, 50k, 4, No, Good 
 |  
room temp
 
 
FIRRun002,
 
PedestalRun012, |  
   Sat Jun 13 09:09:37 2015, Hao Yin, Belle II FADC (H6A), Hardware, 027, ~200k, 2, No, Good 
 |  
room temp
 
 
FIRRun002,
 
PedestalRun012, |  
   Fri Jun 12 17:11:45 2015, Hao Yin, Belle II FADC (H6A), Hardware, 026, 50k, 1, No, Good 
 |  
room temp
 
 
FIRRun002,
 
PedestalRun012, |  
   Fri Jun 12 17:08:23 2015, Benedikt Würkner, SVD3 (H6B), Telescope with FEI4, 80, ~30k, , No, Good 
 |  
Threshold 6
 
 
Testrun to see how the telescope behaves without a DUT to test if there is an increased amount of multiple scattering after the aluminum planes 
of the FW and BW module.  |  
   Fri Jun 12 17:03:02 2015, Hao Yin, Belle II FADC (H6A), Pedestal, 012, 10000, , No, Good 
 |  
room temp
 
FIRRun002
 
  |  
   Fri Jun 12 17:00:18 2015, Hao Yin, Belle II FADC (H6A), Pedestal, 011, 10000, , No, Good 
 |  
| cooled pedestal vaules for long sixlet cal |  
   Fri Jun 12 16:52:52 2015, Benedikt Würkner, SVD3 (H6B), Telescope without DUT, 76, ~30k, , No, Good  
 |  
Threshold 6
 
 
Testrun to see how the telescope behaves without a DUT to test if there is an increased amount of multiple scattering after the aluminum planes 
of the FW and BW module.  |  
   Fri Jun 12 09:31:58 2015, Hao Yin, Belle II FADC (H6A), FIR, 005, , , Yes, Good 
 |  
| FIR filer and ADC delay for long sixlet cal run. |  
   Thu Jun 11 18:37:11 2015, Hao Yin, Belle II FADC (H6A), Hardware, 025, , 6, Yes, Good  
 |  
temp: attachment (in 1st col, out 2nd col)
 
 
FIRRun002,
 
PedestalRun010, |  
   Thu Jun 11 18:01:54 2015, Hao Yin, Belle II FADC (H6A), Hardware, 024, , 6, Yes, Good  
 |  
temp: attachment (in 1st col, out 2nd col)
 
 
FIRRun002,
 
PedestalRun010, |  
   Thu Jun 11 17:11:40 2015, Benedikt Würkner, SVD3 (H6B), Hardware FEI4, 74, 20000, 8, No, Unknown 
 |  
RUN WITH SVD3, telescope and FEI4
 
 
EUDET Run 74
 
 
Mimosa Threshold 6 |  
   Thu Jun 11 16:38:17 2015, Hao Yin, Belle II FADC (H6A), Hardware, 023, , 7, Yes, Good  
 |  
temp: attachment (in 1st col, out 2nd col)
 
 
FIRRun002,
 
PedestalRun010, |  
   Thu Jun 11 16:35:14 2015, Hao Yin, Belle II FADC (H6A), Hardware, 022, , 5, Yes, Good 
 |  
temp: in -23 out -20
 
 
FIRRun002,
 
PedestalRun010, |  
 
 |